Remineralization of enamel subsurface lesions using toothpaste containing tricalcium phosphate and fluoride: an in vitro µCT analysis.

BACKGROUND: This study aimed to compare the efficacies of experimental toothpastes containing functionalized tricalcium phosphate (fTCP) with and without fluoride for in vitro enamel remineralization under pH-cycling conditions. METHODS: To create artificial white spot lesions, 36 bovine enamel specimens were immersed in a demineralization solution for 10 days. During pH-cycling for 12 days, the specimens were divided into four groups based on the experimental toothpaste type used: (a) fTCP-free, fluoride-free (fTCP - F -); (b) fTCP-containing, fluoride-free (fTCP + F -); (c) fTCP-free, fluoride-containing (fTCP - F +); and (d) fTCP-containing, fluoride-containing (fTCP + F +). Micro-focus X-ray computed tomography (µCT) scans of all specimens were obtained before demineralization, after demineralization, and after pH-cycling. The mineral density and mineral loss (ΔZ) in the enamel subsurface lesions were measured and the percentage of remineralization (%R) was calculated from ΔZ after demineralization and pH-cycling. One-way ANOVA with Tukey's test was used for statistical analysis of the %R values. The treated enamel surface was investigated via scanning electron microscopy (SEM). RESULTS: The fTCP - F - group presented with the lowest amount of mineral gain after pH-cycling. In contrast, the fTCP + F + group showed the highest degree of remineralization within all lesion parts. The %R was highest in the fTCP + F + group (38.2 ± 7.8, all P < 0.01). SEM revealed the presence of small crystals on the enamel rods in the fTCP + F - and fTCP + F + groups. CONCLUSIONS: The experimental toothpaste containing fTCP and fluoride increased remineralization of the artificial enamel subsurface lesions during pH-cycling. Furthermore, fTCP and fluoride appear to act independently on the remineralization of enamel subsurface lesions, although they coexisted in one toothpaste type. TRIAL REGISTRATION: This is not a human subject research.

Micro-computed tomography assessment of root dentin around fluoride-releasing restorations after demineralization/remineralization.

Using micro-computed tomography (micro-CT), this study assessed the inhibitory effect of three different types of restorations on root-caries formation under a cariogenic challenge. Bovine-root dentin blocks with a cylindrical cavity were divided into three restoration groups: a fluoride-free self-etch adhesive and a resin composite (SE-ES); a self-etch adhesive and a resin composite with multi-ion release (FL-BF); and a glass ionomer cement (Fuji-VII). After the restorative procedures, the specimens were stored in artificial saliva for 1 d, then subjected to a demineralization solution for 4 d and a remineralization solution for 28 d. Mineral density and mean mineral loss of dentin around the restorations were measured using micro-CT. The mean mineral loss values of dentin around the restorations were highest among SE-ES restorations and lowest among Fuji-VII restorations. Fuji-VII showed the highest mineral density and the lowest mineral loss after 28 d of remineralization. The observations made by scanning electron microscopy demonstrated that Fuji-VII created the smallest outer lesion followed by FL-BF and SE-ES. Fuji-VII has a larger inhibitory effect on root caries around the restorations and enhances remineralization more effectively than either FL-BF or SE-ES. Multi-ion and fluoride release from the restorative materials may be beneficial for inhibition of root-dentin caries around the restorations.

Remineralization effects of enamel binding peptide, WGNYAYK, on enamel subsurface demineralization in vitro. Enamel binding peptide, WGNYAYK effect remineralization of enamel.

Objectives: We investigated remineralization effects of enamel binding peptide (EBP), WGNYAYK, on enamel subsurface demineralization in vitro.Methods: Bovine lower incisor crowns were used as subsurface enamel demineralization samples, and changes of EBP binding, remineraliztion rate, hardness and microstructure were investigated. Binding of EBP, remineralization rate, hardness and structural changes were investigated. Fluorescein isothiocyatate (FITC)-labeled EBPs (0.4 mM, 4.0 mM, and 7.0 mM) were applied to the samples for 30 min at 37 °C, with sample surfaces and cross-sections observed by confocal laser scanning microscope (CLSM). Mineralization analysis samples were divided into 4 experimental groups; distilled water (DW), EBP 0.4 mM, EBP 4.0 mM, and EBP 7.0 mM. Mineral density changes were measured by micro-CT with hardness measured by nano-indentation. Samples were also observed by scanning electron microscope (SEM) for surface and longitudinal microstructure. Results: CLSM images indicated that increased fluorescence was observed in the surface layer and up to about 20 µm below the surface layer. The remineralization rate was significantly higher for EBP 7.0 mM compared to DW (p = 0.008). Enamel surface hardness was significantly higher in all EBP groups compared to DW (p < 0.05) and was highest in the 7.0 mM group. SEM images showed obscuring of the superficial columnar structure in the 7.0 mM EBP group, indicating subsurface crystalline structure recovery. Conclusion: The results of this study suggest that EBP binds to demineralized enamel and promotes remineralization.

Effects of bovine milk osteopontin on in vitro enamel remineralization as a topical application prior to immersion in remineralizing solutions with/without fluoride.

The aim of the present study was to investigate the effects of bovine milk osteopontin (OPN) on enamel remineralization as a topical application prior to immersion in remineralizing solutions with/without fluoride. Bovine enamel blocks were demineralized then were divided into the following 3 groups: OPN (2.7 and 5.4 µM) solutions and deionized water (control). Each group was divided into 2 groups (remineralizing solution with or without 1 ppm of fluoride (F)). The specimens were analyzed by micro-CT and scanning electron microscope (SEM). The percentage of remineralization was higher in remineralization solution with than without F (p<0.05). The present results suggest that bovine milk OPN inhibits remineralization in solution without F, but 5.4 µM bovine milk OPN does not inhibit remineralization of the demineralized body using solution containing F by interrupting mineral deposition on the enamel surface.

In vitro remineralization of enamel with a solution containing casein and fluoride.

The aim of the present study was to investigate the effects of casein in a remineralization solution on enamel remineralization. Bovine blocks were demineralized for 21 days, then, allocated into four groups. The specimens were remineralized for 21 days in the following artificial saliva solutions: 1) 0 µg/mL casein, 0 ppm fluoride (F) (C0-F0); 2) 0 µg/mL casein, 1 ppm F (C0-F1); 3) 10 µg/mL casein, 0 ppm F (C10-F0); and 4) 10 µg/mL casein, 1 ppm F (C10-F1). Micro-CT analyses were performed once a week. Specimens were characterized by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The present results suggest that casein by itself inhibits remineralization, whereas the coexistence of casein and F promotes the remineralization of caries bodies by interrupting mineral deposition on the enamel surface.

Preventive effect of experimental polymer-based desensitizers with NaF on demineralization of root dentin -observed using micro-CT.

This study compared the effect of experimental polymer-based desensitizers with NaF and oxalic acid (OA) for preventing root demineralization via observation using micro-CT. Bovine root dentin surfaces were treated with coating materials: no treatment; MS0(+) (MS Coat One®); MS3000(+) (MS Coat®); MS0(-); MS3000(-); MS7000(+/-); fluoride gel (NaF9000). MS; MS polymer, 0-7000; NaF concentrations, (+/-); OA. The specimens were scanned using micro-CT before and after demineralization (pH4.5, 10 h). Following this, the mean mineral loss (ML) after demineralization was calculated, and the specimens were observed under a scanning electron microscope (SEM). The ML values of MS3000(+), MS7000(-), MS7000(+) and NaF9000 were significantly lower than the other groups (p<0.05). Under an SEM, a membrane structure was observed to have formed on the dentin surface in the presence of the MS, fluoride, and OA. The experimental polymer-based desensitizer with oxalic acid and a high concentration of fluoride is effective for preventing root demineralization.

Micro-CT assessment of comparative radiopacity of adhesive/composite materials in a cylindrical cavity.

This study was performed to evaluate the comparative radiopacity of adhesive/resin composite materials in cylindrical cavities using micro-computed X-ray tomography (µCT). The two-step self-etch adhesive systems, Clearfil SE Bond (SE) and FL-Bond II (FL), and flowable resin composites, Beautifil Flow F10 (BF) and Clearfil Majesty ES Flow High (MJ), were used. The radiopacity of bovine tooth structures and restorative materials was measured by µCT. In addition, cylindrical cavities prepared in bovine teeth were restored with the following adhesive/composite combinations: SE-BF, SE-MJ, FL-BF, and FL-MJ. The mean gray values of the composite restorations were calculated. The threshold values of the µCT images were evaluated using the Otsu's thresholding method. The current results show that the comparative radiopacity of the materials and tooth structure varied, which affected distinguishing the µCT images of the composite restorations in the cylindrical cavity. The proper combination of restorative materials should be considered when conducting in vitro µCT assessments of composite restorations.

Effects of experimental pastes containing surface pre-reacted glass ionomer fillers on inhibition of enamel demineralization.

This study aimed to evaluate the inhibitory effect of experimental pastes containing surface pre-reacted glass ionomer (S-PRG) fillers on enamel demineralization. Bovine blocks were treated twice a day for 4 days by 7 groups; experimental pastes containing 0-30 wt% S-PRG filler (S00, S01, S05, S10, and S30), deionized water (DW) as negative control, and NaF paste (MP) as positive control. The surfaces were demineralized by acetic acid for 3 days. Mineral loss (ML) was calculated by micro-computed X-ray tomography. The treated surface was finally investigated with scanning electron microscope (SEM) and micro-focused particle induced X-ray emission (micro-PIXE). S05, S10 and S30 demonstrated significantly lower ML than S00, S01 and DW (p<0.05). S10 showed the greatest inhibitory effect, which was significantly greater than MP. The S-PRG filler containing experimental pastes demonstrated a potential to inhibit enamel demineralization. Sr ion incorporation was confirmed on the enamel surface with the experimental pastes.