Adiabatic Waveforms from Extreme-Mass-Ratio Inspirals: An Analytical Approach.

Scientific analysis for the gravitational wave detector LISA will require theoretical waveforms from extreme-mass-ratio inspirals (EMRIs) that extensively cover all possible orbital and spin configurations around astrophysical Kerr black holes. However, on-the-fly calculations of these waveforms have not yet overcome the high dimensionality of the parameter space. To confront this challenge, we present a user-ready EMRI waveform model for generic (eccentric and inclined) orbits in Kerr spacetime, using an analytical self-force approach. Our model accurately covers all EMRIs with arbitrary inclination and black hole spin, up to modest eccentricity (≲0.3) and separation (≳2-10 M from the last stable orbit). In that regime, our waveforms are accurate at the leading "adiabatic" order, and they approximately capture transient self-force resonances that significantly impact the gravitational wave phase. The model fills an urgent need for extensive waveforms in ongoing data-analysis studies, and its individual components will continue to be useful in future science-adequate waveforms.

Topical Xerostomia Treatment with Hyaluronate Sheets Containing Pilocarpine.

Sjogren's syndrome and radiation therapy for head and neck cancers are often accompanied by xerostomia. Oral pilocarpine (PCP) to treat xerostomia produces systemic side effects, such as runny nose and lacrimation. To improve the therapeutic efficacy of PCP and reduce the aforementioned side effects, we developed a topical delivery system for PCP using freeze-dried sheets of hyaluronic acid (HA). The advantages of HA sheets over conventional oral formulations were examined through in vivo pharmacokinetic and pharmacodynamic studies after their application to oral tissues and salivary glands. The concentration of PCP in the submucosal tissue of the oral cavity was determined using the microdialysis (MD) method after buccal application of HA sheets containing PCP to hamsters. The concentration of PCP in the MD outflow was quite low after gastric administration, whereas the PCP concentration in plasma was high. In contrast, after buccal application of HA sheets containing PCP, the concentration of the drug in the MD outflow increased, despite the negligible concentration in plasma. These findings indicated that both enhancement of saliva secretion and the avoidance of systemic side effects could be achieved through buccal administration of PCP-loaded HA sheets. In addition, the pharmacodynamic study showed that when compared with intravenous and gastric administration, salivary application of HA sheets containing PCP resulted in similar volumes of saliva secretion and reduced lacrimal secretions. In conclusion, freeze-dried HA sheets allow for the development of a novel buccal delivery system with enhanced therapeutic efficacy and safety to treat xerostomia.

Three-Dimensional Geometric Morphometry of Facial Soft Tissue Changes After Bilateral Sagittal Split Ramus Osteotomy.

ABSTRACT: This study aimed to evaluate the performance of geometric morphometry (GM) to assess the changes in facial soft tissue after orthognathic surgery. Subjects were 27 patients (skeletal class III) who underwent bilateral sagittal split ramus osteotomy and 27 volunteers as a control group. Computed tomography images of each patient were obtained before surgery (T0) and 6 months after surgery (T1). Computed tomography images of 27 volunteers (skeletal class I) were also obtained as a control group. Using a three-dimensional (3D) modeling software, 3D models were created and exported to a 3D surface analyzing software for geometric morphometry and principal component (PC) analysis. Significant differences in facial soft tissue were found in the first and second of 15 PC. The first PC represented variation in the lower facial height, and the second PC represented variation in the anterior-posterior position of the chin. Comparing the pre- and post-operative images, they illustrated that lower facial height was decreased, and the chin and lower lip moved posteriorly. Geometric morphometry showed to be a successful tool to isolate surgery-related changes from interindividual morphological variations.

Comparative evaluation of microbial profiles of oral samples obtained at different collection time points and using different methods.

OBJECTIVES: Recently, the oral microbiome has been found to be associated with oral and general health status. Although various oral sample collection protocols are available, the potential differences between the results yielded by these protocols remain unclear. In this study, we aimed to determine the effects of different time points and methods of oral sample collection on the outcomes of microbiome analysis. MATERIALS AND METHODS: Oral samples were collected from eight healthy individuals at four different time points: 2 h after eating, immediately after teeth brushing, immediately after waking up, and 2 h after eating on the subsequent day. Four methods of saliva collection were evaluated: spitting, gum chewing, cotton swab, and oral rinse. Oral microbiomes of these samples were compared by analyzing the bacterial 16S rRNA gene sequence data. RESULTS: The oral microbial composition at the genus level was similar among all sample collection time points and methods. Alpha diversity was not significantly different among the groups, whereas beta diversity was different between the spitting and cotton swab methods. Compared with the between-subject variations, the weighted UniFrac distances between the groups were not minor. CONCLUSIONS: Although the oral microbiome profiles obtained at different collection time points and using different methods were similar, some differences were detected. CLINICAL RELEVANCE: The results of the present study suggest that although all the described protocols are useful, comparisons among microbiomes of samples collected by different methods are not appropriate. Researchers must be aware of the issues regarding the impact of saliva collection methods.

Nondestructive High-Sensitivity Detections of Metallic Lithium Deposited on a Battery Anode Using Muonic X-rays.

Metallic Li deposited on the anode is known to induce short circuiting and degradation of the charge capacity of Li-ion batteries. However, no reliable technique is currently available to observe such Li metal without removing the case of the battery. An elemental analysis using muonic X-rays is proposed here because of its unique properties of nondestructive measurement, high sensitivity to light elements, and depth resolution. We demonstrated that this technique can be applied to detection of Li deposited on the surface of an anode containing Li ions, using a fully charged anode with Li deposited due to overcharge in an Al-laminated plastic pouch. The basis for the detection method is the difference in the atomic Coulomb capture ratio of the negative muons between the Li metal and ions. We have found, as a result, that the intensity of the muonic X-rays from metallic Li was approximately 50 times higher than that from Li ions. Consequently, the Li metal on the anode was clearly distinguishable from the intercalated Li ions in the anode. Furthermore, measurements of two overcharged anodes with 1.3 and 2.7 mg of metallic Li deposition, respectively, indicated that this technique is suitable for quantitative analysis. Distribution analysis is also possible, as shown by a preliminary observation on an overcharged anode from the back side. Therefore, this technique offers a new approach to the analysis of Li deposited on the anode of a Li-ion pouch battery.

Intramolecular Hydrogen Bonding: A Key Factor Controlling the Photosubstitution of Ruthenium Complexes.

Photosubstitution reactions of ruthenium complexes with pyrazole ligands, cis-[Ru(bpy)2(pzH)2]2+ (1a), cis-[Ru(bpy)2(pz)(pzH)]+ (1b), and cis-[Ru(bpy)2(pz)2]0 (1c) (pzH = pyrazole, bpy = 2,2'-bipyridine), were investigated. Dicationic complex 1a was deprotonated to 1b using moderate base (pKa = 15.2, MeCN), while the second deprotonation to give 1c required more severe conditions (pKa = 26.9). Monocationic complex 1b possessed an N-H···N-type intramolecular hydrogen bond between the pyrazole and pyrazolate ligands, as corroborated by the solid-state crystal structure. The photosubstitution quantum yield of 1a (Φ = 0.26) was comparable to that of cis-[Ru(bpy)2(pyridine)2]2+ (Φ = 0.24) in acetonitrile solution. In contrast, the photodissociation of a pzH ligand was strongly suppressed by the deprotonation of a pyrazole ligand N-H group. In the presence of 10 000 equiv of 4,4'-dimethylaminopyridine, the quantum yield dropped to ∼2 × 10-6 in acetonitrile. The photosubstitution quantum yield of 1b was even smaller than that of neutral complex 1c, although 1c had a smaller HOMO-LUMO energy gap than monocationic complex 1b. The small quantum yield of 1b was attributed to intramolecular hydrogen bonding between pyrazole and pyrazolate ligands. The apparent rate constants for the photosubstitution of 1b were highly solvent-dependent. The photosubstitution of 1b was suppressed in aprotic solvents, while the reaction was accelerated by 2 orders of magnitude in protic solvents with strong proton donor abilities.

Ultraviolet-C resistance of selected spoilage yeasts in orange juice.

This study determined the ultraviolet-C (UV-C) dose necessary to reduce 90% population (DUV-C) of 17 spoilage yeasts and their composited inoculum in orange juice (pH 3.71, 11.60 °Brix, 0.55% citric acid, 2.46% w/v insoluble solids). Growth parameters of all test yeasts were first established to standardize the growth stage of the cells prior to harvesting and eventual UV-C challenge studies. Approximately 4-5 log CFU/ml cells in the mid-stationary growth phase (30.3 t0 39.9 h, 25 °C) were suspended in 4 ml turbulent flowing juice and subjected to UV-C irradiation at an incident surface irradiance of 3.64-4.97 mW/cm2. The inactivation rates of each yeast and their composited inoculum were determined using 2 methods namely, the linear regression and Baranyi and Roberts (1994) model-fitting. Results showed that the yeasts exhibited either log-linear or biphasic inactivation behavior with downward concavity or inactivation lag. Regardless of the method of determination, Cryptococcus albidus (LJY1) exhibited the significantly greatest (p < 0.05) UV-C resistance with DUV-C values of 1924.31 and 2174.63 mJ/cm2. On the other hand, Candida parapsilosis was determined to be least resistant with a DUV-C values of 245.83 and 357.88 mJ/cm2. Majority of the DUV-C values determined from the model-fitting were greater than those calculated from linear regression. However, only those determined for the composited inoculum were significantly different. The results of this study address knowledge gaps pertinent to the UV-C resistance of less studied spoilage yeast, and help in better understanding the utility of this non-thermal food processing technology.

Identifying Differences Between a Straight Face and a Posed Smile Using the Homologous Modeling Technique and the Principal Component Analysis.

Recently, a homologous modeling method was developed to simulate 3D human body forms, which can visualize principal component analysis (PCA) results and facilitate its detailed comparison with results of previous method. Herein, we aimed to construct a homologous model of the face to identify differences between a straight face and a posed smile. Thirty-eight volunteers (19 males and 19 females, 38 straight faces and 38 posed smiles) with no medical history associated with a posed smile were enrolled. Three-dimensional images were constructed using the Homologous Body Modeling software and the HBM-Rugle; 9 landmarks were identified on the 3D-model surfaces. The template model automatically fitted into an individually scanned point cloud of the face by minimizing external and internal energy functions. Faces were analyzed using PCA; differences between straight faces and posed smiles were analyzed using paired t tests. Contribution of the most important principal component was 23.8%; 8 principal components explained >75% of the total variance. A significant difference between a straight face and a posed smile was observed in the second and the fourth principal components. The second principal component images revealed differences between a straight face and a posed smile and changes around the chin area with regard to length, shape, and anteroposterior position. Such changes were inclusive of individual differences. However, the fourth principal component image only revealed differences between a straight face and a posed smile; observed differences included simultaneous shortening of upper and lower eyelid length, evaluation of the nasal ala ase, swelling of the cheek area, and elevation of the mouth angle. Although these results were clinically apparent, we believe that this article is the first to statistically verify the same.Consequently, the homologous model technique and PCA are useful for evaluation of the facial soft-tissue changes.

Removal of a Fixation Screw That Was Forced Into the Postsuperior Maxillary Sinus Wall: Case Report.

We have encountered a rare case in which the subject underwent maxillary sinus floor elevation at another hospital, and a screw to fix the grafted bone substitute was forced into the maxillary sinus and intruded into the bone. Various different foreign bodies have been reported as being forced into the maxillary sinus due to dental treatment, and these foreign bodies are often retained on the maxillary sinus mucous membrane. However, no reports have described a screw forced in and intruded into the peculiar position in the bone, as seen in the present case, which we report here with additional discussion.

Reconstruction of the Alveolar Bone Using Bone Augmentation With Selective Laser Melting Titanium Mesh Sheet: A Report of 2 Cases.

Bone augmentation is used to supplement bone defects during dental implant treatment. In this technique, the area filled with bone prosthetic material is covered with an artificial space-making device or titanium mesh sheet, which must be manually adapted to the bone defect during the procedure before being fixed in place. Selective laser melting (SLM) method can be used to preadapt the titanium mesh sheet based on preoperative CT data. This method enables shorter surgery times compared with conventional titanium mesh sheet methods, as well as regeneration of an ideal alveolar bone shape. Here, we present 2 cases of bone augmentation using the SLM titanium mesh sheet method. The postoperative course was without complications in both cases; neither patient experienced mesh exposure or infection during healing. The SLM titanium mesh sheet method should be considered as a new and effective bone augmentation method.

Targeting ID2 expression triggers a more differentiated phenotype and reduces aggressiveness in human salivary gland cancer cells.

Inhibitors of DNA-binding (ID) proteins are negative regulators of basic helix-loop-helix transcription factors and generally stimulate cell proliferation and inhibit differentiation. We previously determined that ID1 was highly expressed in aggressive salivary gland cancer (SGC) cells in culture. Here, we show that ID2 is also expressed in aggressive SGC cells. ID2 knockdown triggers important changes in cell behavior, that is, it significantly reduces the expression of N-cadherin, vimentin and Snail, induces E-cadherin expression and leads to a more differentiated phenotype exemplified by changes in cell shape. Moreover, ID2 knockdown almost completely suppresses invasion and the expression of matrix metalloproteinase 9. In conclusion, ID2 expression maintains an aggressive phenotype in SGC cells, and ID2 repression triggers a reduction in cell aggressiveness. ID2 therefore represents a potential therapeutic target during SGC progression. ID proteins are negative regulators of basic helix-loop-helix transcription factors and generally stimulate cell proliferation and inhibit differentiation. ID2 knockdown triggers important changes in cell behavior, that is, it significantly reduces the expression of N-cadherin, vimentin and Snail, induces E-cadherin expression and leads to a more differentiated phenotype exemplified by changes in cell shape. ID2 therefore represents a potential therapeutic target during SGC progression.

Characteristics of Posed Smiles for Class III Female Patients Before and After Osteotomy Using Principal Component Analysis.

The purpose of this study was to clarify characteristics of posed smiles for Class III female patients before and after orthognathic surgery. Just before retrusion surgery and the removal of fixation plates, 2 sets of posed smiles were recorded for 7 Class III female patients. As normal controls, 7 healthy female volunteers were also recorded. Using our video-based motion analyzing system, range images and 5 × 5 virtual grids projected onto the lips were recorded for all patients while making a posed smile. The gravity for each area in the lips was calculated from the intersections of the virtual grids. Principal component analysis was applied to the normalized virtual grids, that is, a homologous model of lip shape, for all frames of the posed smiles. While the sample size was too small to generalize from these results, we found that the upper vermilion shifted posteriorly and laterally in posed smiles for Class III female patients after retrusion surgery as compared with the preoperative posed smiles. In addition, the characteristic lip movements during postoperative posed smiles for Class III female patients did not resemble those of the normal controls.

Pure psychiatric presentation of the Lewy body disease is depression--an analysis of 60 cases verified with myocardial meta-iodobenzylguanidine study.

OBJECTIVE: Parkinson's disease (PD), Parkinson's disease with dementia (PDD) and dementia with Lewy bodies (DLB) were collectively termed Lewy body disease (LBD). Pure psychiatric presentation (PPP) of the LBD may be the fourth subtype in which psychiatric symptoms without definite parkinsonism and cognitive disturbance lasted for many years. The aim of this study is to localize the presence of the PPP in subjects with low uptake of myocardial meta-iodobenzylguanidine (MIBG). METHODS: Sixty MIBG-verified patients (28 women and 32 men) were classified into three psychiatric pictures; depression (Group D: 27 patients), isolated visual hallucinations (Group V: 16 patients) and psychosis (Group P: 17 patients). Fifty six cases were examined with single photon emission tomography (SPECT) study of the brains in which hypoperfusion lobes were identified in 37 cases and 19 cases showed no abnormality. After that, we determined final diagnoses; PD, PDD, DLB and PPP with an aid of the DSM-IV, the unified Parkinson's disease rating scale (UPDRS) and Mini-mental state examination (MMSE). RESULTS: Of Group D patients 40% remained depressive without parkinsonism and about 50% had or developed typical parkinsonism. Most Group P patients developed clinical pictures of PDD or DLB. Statistics provided four combinations: Group V-DLB-occipital lobe hypoperfusion, Group D-PD without SPECT abnormality, Group P-PDD with temporal lobe hypoperfusion and Group D-PPP without SPECT abnormality. CONCLUSIONS: PPP featured major depressive disorder and can be preparative of incidental LBD and prodromal depression of PD. Psychosis and dementia were of the same quality that characterizes the PDD.

[Evaluation of the Safety of a Generic Formulation of Cisplatin in Patients with Thoracic Malignancies].

Cisplatin (CDDP) is a key drug in the systemic treatment of various solid tumors. Brand-name CDDP may differ across generic formulations considering various clinical parameters. Therefore, in this study, we aimed to assess the safety of a generic CDDP formulation. To compare brand-name CDDP with a generic formulation, the incidence of adverse events, especially renal toxicity, was investigated in 500 patients with thoracic malignancies who received chemotherapy with more than 60 mg/m2 of either brand-name or generic CDDP. We compared the maximum serum creatinine (Cr) level after chemotherapy in the 2 groups. The correlation coefficients between the pretreatment Cr and the maximum Cr after CDDP administration did not differ between brand-name CDDP and generic CDDP (0.610 and 0.644, respectively; p=0.528). Furthermore, the correlation coefficients did not differ in subgroup analysis according to sex or adjuvant therapy. The severity of adverse events was similar in the 2 groups. In conclusion, generic CDDP can safely be used as an alternative to brand-name CDDP in the clinical setting.

Gravitational self-force correction to the innermost stable circular equatorial orbit of a Kerr black hole.

For a self-gravitating particle of mass µ in orbit around a Kerr black hole of mass M ≫ µ, we compute the O(µ/M) shift in the frequency of the innermost stable circular equatorial orbit due to the conservative piece of the gravitational self-force acting on the particle. Our treatment is based on a Hamiltonian formulation of the dynamics in terms of geodesic motion in a certain locally defined effective smooth spacetime. We recover the same result using the so-called first law of binary black-hole mechanics. We give numerical results for the innermost stable circular equatorial orbit frequency shift as a function of the black hole's spin amplitude, and compare with predictions based on the post-Newtonian approximation and the effective one-body model. Our results provide an accurate strong-field benchmark for spin effects in the general-relativistic two-body problem.

Enhancement of in vitro antibacterial activity and bioactivity of iodine-loaded titanium by micro-scale regulation using mixed-acid treatment.

Postoperative infection and subsequent device loss are serious complications in the use of titanium dental implants and plates for jawbone reconstruction. We have previously reported that NaOH-CaCl2 -thermal-ICl3 -treated titanium (NaCaThIo) has a nano-scale surface and exhibits antibacterial activity against Staphylococcus aureus. The present study examined the surface properties of mixed-acid treated and then iodine-treated titanium (MA-NaCaThIo), and evaluated oral antibacterial activity and cytotoxicity compared with the results obtained with NaCaThIo. MA-NaCaThIo formed a surface layer with a nano-scale network structure having microscale irregularities, and both the thickness of the surface layer (1.49 ± 0.16 µm) and the average surface roughness (0.35 ± 0.03 µm) were significantly higher than those of NaCaThIo. Furthermore, MA-NaCaThIo maintained high hydrophilicity with a contact angle of 7.5 ± 1.7° even after 4 weeks, as well as improved apatite formation, iodine ion release, and antibacterial activity against Prevotella intermedia compared to NaCaThIo. Cell culture test revealed that MA-NaCaThIo exhibited no cytotoxicity against MG-63 and Vero cells, while increased cell proliferation, ALP activity and mineralization of MG-63 compared to NaCaThIo. This treated titanium is expected to be useful for the development of next-generation titanium devices having both bone-bonding and antibacterial properties.

An Innovative Design to Enhance Osteoinductive Efficacy and Biomechanical Behavior of a Titanium Dental Implant.

The present study investigated the in vivo bone-forming efficacy of an innovative titanium (Ti) dental implant combined with a collagen sponge containing recombinant human bone morphogenetic protein-2 (BMP-2) in a pig model. Two different concentrations of BMP-2 (20 and 40 µg/mL) were incorporated into collagen sponges and placed at the bottom of Ti dental implants. The investigated implants were inserted into the edentulous ridge at the canine-premolar regions of Lanyu small-ear pigs, which were then euthanized at weeks 1, 2, 4, 8, and 12 post-implantation. Specimens containing the implants and surrounding bone tissue were collected for histological evaluation of their bone-to-implant contact (BIC) ratios and calculation of maximum torques using removal torque measurement. Analytical results showed that the control and BMP-2-loaded implants presented good implant stability and bone healing for all testing durations. After 1 week of healing, the BMP-2-loaded implants with a concentration of 20 µg/mL exhibited the highest BIC ratios, ranging from 58% to 76%, among all groups (p = 0.034). Additionally, they also possessed the highest removal torque values (50.1 ± 1.3 N-cm) throughout the 8-week healing period. The BMP-2-loaded implants not only displayed excellent in vivo biocompatibility but also presented superior osteoinductive performance. Therefore, these findings demonstrate that BMP-2 delivered through a collagen sponge can potentially enhance the early-stage osseointegration of Ti dental implants.

Association between occupational exposure and control measures for antineoplastic drugs in a pharmacy of a hospital.

OBJECTIVES: To investigate the association between occupational contamination and exposure levels to antineoplastic drugs and the application of control measures in a hospital work environment. METHODS: Wipe samples of equipments were collected at a hospital in Osaka Prefecture, Japan, from 2007 to 2011. These samples were subjected to measurements of cyclophosphamide (CP), gemcitabine (GEM), platinum-containing drugs (Pt), and fluorouracil (5FU). Additionally, 24-h urine samples were collected from pharmacists who handled antineoplastic drugs, which were analyzed for CP and alpha-fluoro-beta-alanine (AFBA). The application of control measures was scored according to a checklist, which consisted of the following five items: safety equipment and maintenance, training and documentation, devices for safe handling, personal protective equipment, and emergency care. The aim was to obtain a score of 80%. RESULTS: The median CP, GEM, and 5FU concentrations of all wipe samples were significantly lower during the period when the mean score was >80% (attainment period) versus when the mean score was ≤80% (nonattainment period; all P < 0.001, Mann-Whitney's U-test). Additionally, the median urinary CP and AFBA concentrations of pharmacists during the attainment period tended to be lower than that of those during the nonattainment period (P = 0.061 and 0.061, respectively, using Mann-Whitney's U-test). CONCLUSIONS: Contamination and levels of exposure to antineoplastic drugs decreased with a score higher than 80%. The scores of the items on the checklist appeared to adequately reflect the condition of the control measures, as increases in all five items were associated with reductions in the contamination by and levels of exposure to all drugs.

Sarcopenia and decline in appendicular skeletal muscle mass are associated with hypoperfusion in key hubs of central autonomic network on 3DSRT in older adults with progression of normal cognition to Alzheimer's disease.

AIM: Although sarcopenia is common in patients with Alzheimer's disease (AD), the neural substrates involved remain unclear. We investigated the relationship between sarcopenia, as well as its definition components, and regional cerebral blood flow (rCBF) in older adults with progression of normal cognition to AD. METHODS: 99m Tc-ethyl-cysteinate-dimer single-photon emission computed tomography was carried out in 95 older adults with progression of normal cognition to AD (40 men and 55 women, mean ± SD age 80.9 ± 6.8 years). The associations of rCBF determined by 3-D stereotactic region of interest template software, with sarcopenia and its definition components, slower gait speed, weaker grip strength, and decline in appendicular skeletal muscle mass index (ASMI) were analyzed. RESULTS: Logistic regression analysis adjusted by age, sex, mini-mental state examination score and education showed that sarcopenia as well as ASMI less than the cut-off (men 7.0 kg/m2 , women 5.7 kg/m2 ) were associated with significantly reduced rCBF in the key hub of the central autonomic network, including the insula, anterior cingulate cortex, subcallosal area, rectal gyrus, hypothalamus, amygdala and caudate head. Sarcopenia and ASMI decline were associated with hypoperfusion in the aforementioned cortical hubs of the central autonomic network in men, but with hypoperfusion of the hypothalamus in women. Linear regression analysis showed significant correlations of ASMI/cut-off with rCBF in the bilateral medial frontal cortex, as well as rCBF in the aforementioned key hubs. CONCLUSIONS: Hypoperfusion in key hubs of central autonomic network is implicated in the emergence of sarcopenia, probably through ASMI decline in vulnerable older adults. Geriatr Gerontol Int 2023; 23: 16-24.

Septum-directed secretion in the filamentous fungus Aspergillus oryzae.

Although exocytosis in fungal cells takes place at hyphal tips, there also seems a line of circumstantial evidence suggesting the occurrence of exocytosis at other sites of cells, such as septa. To investigate whether exocytosis takes place at fungal septa, we monitored dynamics of EGFP-fused α-amylase (AmyB-EGFP), the representative secretory enzyme of the filamentous fungus Aspergillus oryzae. We found that AmyB-EGFP accumulates in Spitzenkörper at hyphal tips as well as septal periplasm between the plasma membrane and cell walls. The septal accumulation of AmyB-EGFP was a rapid process, and required microtubules but not F-actin. Thus, this process is independent of exocytosis at hyphal tips that requires both microtubules and F-actin. In addition, fluorescence recovery after photobleaching (FRAP) analysis of EGFP-fused AoSnc1 revealed that secretory vesicles constitutively fuse with the septal plasma membrane. These results demonstrated that exocytosis takes place at septa in addition to hyphal tips. Analysis of two plasma membrane transporters, AoUapC and AoGap1, revealed that they preferentially accumulate at septa and the lateral plasma membrane with no clear accumulation at apical Spitzenkörper, suggesting that non-tip directed exocytosis is important for delivery of these proteins.