RESUMEN
INTRODUCTION: Few studies have evaluated the predictability of expansion with Invisalign for the current SmartTrack material. METHODS: Pretreatment, predicted, and posttreatment digital models from Invisalign's ClinCheck software were obtained for 57 adult patients with a planned arch expansion of at least 3 mm. Arch width measurements were collected using a software measuring tool (MeshLab), Invisalign's arch width table, and the centroid of the clinical crown. Data for 30 patients were remeasured for each method to assess intrarater reliability. Predictability of expansion was calculated by comparing the amount of achieved expansion to predicted expansion. RESULTS: The predictability of expansion across centroids for the maxillary teeth was: 72.2% canines, 78.9% first premolars, 81.1% second premolars, 63.5% first molars, and 41.5% second molars. The predictability of expansion across centroids for the mandibular teeth was: 82.3% canines, 93.0% first premolars, 87.7% second premolars, 79.8% first molars, and 42.9% second molars. The average expansion was significantly different from that predicted for each type of tooth in both the maxilla and mandible. Both underexpansion and overexpansion were observed. Arch width measurement reliability for each employed method was as follows: MeshLab (average error 0.197 mm); calculated centroids (0.002 mm); ClinCheck arch width table (0.000 mm). CONCLUSIONS: On average, the amount of predicted expansion is not achieved with the Invisalign system and varies according to tooth type and arch. Discretion is required when overcorrecting to compensate for expansion inaccuracy. Both underexpansion and overexpansion were observed; further investigation into factors influencing underexpansion and overexpansion is required.
Asunto(s)
Aparatos Ortodóncicos Removibles , Estudios Retrospectivos , Reproducibilidad de los Resultados , Diente Molar , Maxilar , Diente PremolarRESUMEN
INTRODUCTION: Recent 3-dimensional technology advancements have resulted in new techniques to improve the accuracy of intraoperative transfer. This study aimed to validate the accuracy of computer-aided design and manufacturing (CAD-CAM) customized surgical cutting guides and fixation plates on mandibular repositioning surgery performed in isolation or combined with simultaneous maxillary repositioning surgery. METHODS: Sixty patients who underwent mandibular advancement surgery by the same surgeon were retrospectively evaluated by 3-dimensional surface-based superimposition. A 3-point coordinate system (x, y, z) was used to identify the linear and angular discrepancies between the planned movements and actual outcomes. Wilcoxon rank sum test was used to compare the outcomes between the mandible-only and the bimaxillary surgery groups with significance at P <0.05. Pearson correlation coefficient compared planned mandible advancement to the outcome from advancement planned. The centroid, which represents the mandible as a single unit, was computed from 3 landmarks, and the discrepancies were evaluated by the root mean square error (RMSE) for clinical significance set at 2 mm for linear discrepancies and 4° for angular discrepancies. RESULTS: There was no statistically significant difference between the planned and actual position of the mandible in either group when considering absolute values of the differences. When considering raw directional data, a statistically significant difference was identified in the y-axis suggesting a tendency for under-advancement of the mandible in the bimaxillary group. The largest translational RMSE for the centroid was 0.77 mm in the sagittal dimension for the bimaxillary surgery group. The largest rotational RMSE for the centroid was 1.25° in the transverse dimension for the bimaxillary surgery group. Our results show that the precision and clinical feasibility of CAD-CAM customized surgical cutting guides and fixation plates on mandibular repositioning surgery is well within clinically acceptable parameters. CONCLUSION: Mandibular repositioning surgery can be performed predictably and accurately with the aid of CAD-CAM customized surgical cutting guides and fixation plates with or without maxillary surgery.
Asunto(s)
Procedimientos Quirúrgicos Ortognáticos , Cirugía Asistida por Computador , Humanos , Estudios Retrospectivos , Cirugía Asistida por Computador/métodos , Imagenología Tridimensional , Procedimientos Quirúrgicos Ortognáticos/métodos , Diseño Asistido por ComputadoraRESUMEN
CONTEXT: Improving the oral health of Aboriginal and Torres Strait Islander people has been prioritised by both of the Australian National Oral Health Plans (2004-2013 and 2015-2024). However, providing adequate access to timely dental care to remote Aboriginal communities remains a challenge. The Kimberley region of Western Australia in particular experiences a significantly higher prevalence of dental disease compared to other regional centres. The region covers an area of over 400 000 km2, with 97% of this being classified as very remote and 42% of the population identifying as Aboriginal and/or Torres Strait Islander. The provision of dental care to remote Aboriginal communities in the Kimberley is complex and involves careful consideration of the unique environmental, cultural, organisational and clinical factors at play. ISSUE: The low population densities combined with the high running costs of a fixed dental practice mean that establishing a permanent dental workforce is generally not viable in remote communities in the Kimberley. Thus there is a pressing need to explore alternative strategies to extend care to these communities. In this context, the Kimberley Dental Team (KDT), a non-government, volunteer-led organisation, was established to 'fill the gaps' and extend dental care to areas of unmet need. There is currently a lack of literature around the structure, logistics and delivery of volunteer dental services to remote communities. This paper describes the KDT, its development, resources, operational factors and organisational characteristics of the model of care, including mapping the reach of the program. LESSONS LEARNED: This article underlines the challenges around dental service provision to remote Aboriginal communities and the evolution of a volunteer service model over the course of a decade. The structural components integral to the KDT model were identified and described. Community-based oral health promotion through initiatives such as supervised school toothbrushing programs enabled access to primary prevention for all school children. This was combined with school-based screening and triage to identify children in need of urgent care. Collaboration with community-controlled health services and cooperative use of infrastructure enabled holistic management of patients, continuity of care and increased efficiency of existing equipment. Integration with university curricula and supervised outreach placements were used to support training of dental students and attract new graduates into remote area dental practice. Supporting volunteer travel and accommodation and creating a sense of family were central to volunteer recruitment and sustained engagement. Service delivery approaches were adapted to meet community needs; a multifaceted hub-and-spoke model with mobile dental units was used to increase the reach of services. Strategic leadership through an overarching governance framework built from community consultation and steered by an external reference committee informed the model of care and its future direction.
Asunto(s)
Aborigenas Australianos e Isleños del Estrecho de Torres , Atención Odontológica , Servicios de Salud del Indígena , Niño , Humanos , Australia , Grupos de Población , Voluntarios , Australia Occidental , Atención Odontológica/organización & administraciónRESUMEN
INTRODUCTION: We aimed to assess pulp blood flow (PBF) and pulp sensibility changes in healthy and traumatized teeth undergoing maxillary expansion with a mini-implant hybrid hyrax appliance. METHODS: Forty-five patients requiring maxillary expansion either with mini-implant supported hyrax expander (MARME) or tooth-borne hyrax expander (RME) had the pulp status of their maxillary anterior teeth assessed using laser Doppler flowmetry, electric pulp testing, and thermal testing (carbon dioxide snow). The study cohort was divided into 4 groups on the basis of expansion appliance (MARME or RME) and trauma experience (trauma or nontrauma). Each patient was tested before expansion, 2 weeks after expansion, and 3 months after expansion (T3). Relationships between PBF, time interval, and trauma were evaluated using linear mixed modeling. RESULTS: Healthy teeth with RME or MARME expansion had reestablished pretreatment PBF at T3 (P >0.05). Traumatized teeth undergoing RME did not reach pretreatment PBF at T3 (P ≤0.05). There were no statistically significant changes in PBF in the MARME+Trauma group at all time intervals (P >0.05). A reduction in pulp blood flow occurred during rapid maxillary expansion from both expansion appliances; however, the relative reduction of PBF in MARME was less than with RME (P ≤0.05) 2 weeks after expansion. Most teeth across all groups (≥85%) maintained pulp sensibility at all time intervals regardless of whether there was a history of trauma. CONCLUSIONS: Patients with transverse discrepancies and a history of trauma may benefit from MARME as evidenced by reduced changes in PBF compared with RME without affecting pulp sensibility.
Asunto(s)
Implantes Dentales , Técnica de Expansión Palatina , Diente , Humanos , Maxilar , Estudios ProspectivosRESUMEN
BACKGROUND: Australian Aboriginal and Torres Strait Islander people continue to experience significant disparities in oral health and there remains an urgent need to improve services to rural and remote communities. Quantitative research has typically been used to highlight the disease burden and severity experienced by those living in remote communities, but this data does little to explore the lived reality and psychosocial nuances that impact on care. The Kimberley region of Western Australia is home to over 150 Aboriginal communities spread out across 400,000 square kilometres. The success and sustainability of oral health services to these remote communities relies on respect and reciprocity achieved through shared knowledge, decision making and involvement of Aboriginal people in discussions around oral health services and their delivery. This, study aimed to investigate the perceptions and attitudes toward dental services among Aboriginal Australian families living in remote Kimberley communities. METHODS: Semi-structured interviews and yarning circles were carried out following purposive sampling of Aboriginal adults living in the East Kimberley region of Western Australia. Interviews were recorded, transcribed, and analysed guided by a constructivist grounded theory approach. RESULTS: In total, 80 community members participated in the yarning process. Enablers to care included: promotion of existing services, integration with primary health services, using mobile dental services and volunteers to extend care. Barriers to care included transportation, cost of treatment, the complexity of appointment systems and shame associated with health-seeking behaviours. CONCLUSIONS: Reassessing the prevailing operative model of dental care to remote Aboriginal communities is warranted to better address the overwhelming structural barriers that impact on oral health. Integration with existing primary health services and schools, the use of mobile units to extend care and increasing community engagement through clinical yarning are recommended in improving the current state of dental services to communities in the Kimberley.
Asunto(s)
Nativos de Hawái y Otras Islas del Pacífico , Salud Bucal , Adulto , Australia , Atención Odontológica , Conocimientos, Actitudes y Práctica en Salud , HumanosRESUMEN
INTRODUCTION: The aim of this work was to assess and compare changes in pulp blood flow (PBF) and pulp sensibility (PS) after surgically assisted rapid maxillary expansion (SARME) and rapid orthopedic maxillary expansion (OME). METHODS: Ten patients requiring SARME and 10 requiring OME had the pulp status of their maxillary incisors and canines assessed with the use of laser Doppler flowmetry, electric pulp testing (EPT), and CO2 snow. The SARME group was assessed at T1-S (before surgery), T2-S (after surgery, before expansion), T3-S (after surgery, at completion of expansion), and T4-S (3 months after surgery). The OME group was assessed at T1-O (before expansion), T2-O (after rapid expansion), and T3-O (3 months after expansion commencement). Relationships between PBF/PS and the procedures, assessment times, and tooth types were evaluated. RESULTS: In the SARME group, surgery did not cause significant (P ≥0.05) reduction in PBF, maxillary expansion did cause significant (P ≤0.05) reduction in PBF, pretreatment PBF was reestablished by T4-S, and nonresponses to both EPT and CO2 peaked at T2-S. In the OME group, rapid expansion caused significant (P ≤0.05) reduction in PBF, pretreatment PBF was reestablished by T3-O, and all teeth responded to at least 1 of EPT or CO2 at each assessment time. CONCLUSIONS AND CLINICAL IMPLICATIONS: Within the study's limitations, it can be concluded that both SARME and OME induce reduction but not elimination of PBF to maxillary anterior teeth and therefore do not cause loss of pulp vitality; surgery for SARME does not significantly reduce PBF to maxillary anterior teeth, rather it is the process of maxillary expansion that significantly reduces PBF in SARME patients; and caution when using CO2 and EPT tests alone to assess pulp status after SARME is warranted because the capacity for CO2 or EPT to provide negative sensibility responses despite the presence of PBF was observed.
Asunto(s)
Pulpa Dental/irrigación sanguínea , Técnica de Expansión Palatina , Sensación/fisiología , Adolescente , Adulto , Pulpa Dental/fisiología , Prueba de la Pulpa Dental , Femenino , Humanos , Flujometría por Láser-Doppler , Masculino , Estudios Prospectivos , Flujo Sanguíneo Regional/fisiologíaRESUMEN
INTRODUCTION: Orthognathic surgery has the potential to compromise the vitality of the teeth. This paper aims to assess changes in pulp blood flow (PBF) and pulp sensibility (PS) of the anterior dentition following orthognathic surgery and to assess the influence of the proximity of the surgical osteotomy on the PBF and/or PS. METHODS: Twenty-six patients undergoing orthognathic surgery (Le Fort I or bilateral sagittal split osteotomy [BSSO]) were compared to sixteen control patients treated by fixed appliances only using Laser Doppler flowmeter (LDF) and thermal testing (CO2 snow). Surgery patients were tested at T1 (presurgery), T2 (4-5 weeks postsurgery), T3 (3 months postsurgery), and T4 (6 months postsurgery). Control patients were tested at T1 (pretreatment), T2 (6 months posttreatment), T3 (12 months posttreatment), and T4 (18 months posttreatment). Differences between the maxilla and mandible were assessed. RESULTS: No differences in PBF or PS were recorded in the control group. In the surgery group, both jaws followed the same pattern after surgery, an initial decrease at T2 followed by a gradual recovery to pretreatment PBF levels with no significant difference between T1 versus T4 in both jaws. No difference in PBF was observed between the maxilla and mandible at any testing time interval. CONCLUSIONS AND CLINICAL IMPLICATIONS: PBF and PS of the anterior dentition was severely affected immediately postsurgery, followed by a gradual increase to full recovery. This pattern of recovery was exhibited in both jaws. A negative sensibility response or discoloration should not be seen as an indication of irreversible ischemic pulp changes. Monitoring for at least 6 months or using LDF as a confirmatory test is required before any irreversible endodontic treatment is to be considered.
Asunto(s)
Pulpa Dental , Flujometría por Láser-Doppler , Procedimientos Quirúrgicos Ortognáticos , Humanos , Pulpa Dental/irrigación sanguínea , Pulpa Dental/fisiología , Estudios Prospectivos , Femenino , Masculino , Adulto , Adulto Joven , Flujo Sanguíneo Regional/fisiología , Adolescente , Osteotomía Le Fort , Osteotomía Sagital de Rama Mandibular/métodos , Mandíbula/cirugía , Mandíbula/irrigación sanguíneaRESUMEN
OBJECTIVES: Aboriginal and Torres Strait Islander communities in remote parts of Australia are some of the most underserviced communities in regard to oral health care. These communities rely on volunteer dental programmes such as the Kimberley Dental Team to fill the gaps in care, however, there are no known continuous quality improvement (CQI) frameworks to guide such organizations to ensure that they are delivering high-quality, community-centred, culturally appropriate care. This study proposes a CQI framework model for voluntary dental programmes providing care to remote Aboriginal communities. METHODS: Relevant CQI models wherein the (i) behaviour of interest was quality improvement, and (ii) the health context was volunteer services in Aboriginal communities were identified from the literature. The conceptual models were subsequently augmented using a 'best fit' framework and the existing evidence synthesized to develop a CQI framework that aims to guide volunteer dental services to develop local priorities and enhance current dental practice. RESULTS: A cyclical five-phase model is proposed starting with consultation and moving through the phases of data collection, consideration, collaboration and celebration. CONCLUSIONS: This is the first proposed CQI framework for volunteer dental services working with Aboriginal communities. The framework enables volunteers to ensure that the quality of care provided is commensurate with the community needs and informed by community consultation. It is anticipated that future mixed methods research will enable formal evaluation of the 5C model and CQI strategies focusing on oral health among Aboriginal communities.
Asunto(s)
Servicios de Salud del Indígena , Mejoramiento de la Calidad , Humanos , Australia , Aborigenas Australianos e Isleños del Estrecho de Torres , Voluntarios , Atención OdontológicaRESUMEN
OBJECTIVES: This study aims to conduct a process evaluation of the Kimberley Dental Team (KDT), a not-for-profit, volunteer organization providing care to remote Aboriginal communities in Western Australia. METHODS: A logic model was constructed to detail the operational context of the KDT model. Subsequently, the fidelity (the extent to which each of the programme's elements were implemented as planned), dose (types and quantity of services provided) and reach (demographic characteristics and communities serviced) of the KDT model were evaluated using service data, deidentified clinical records and volunteer rosters maintained by KDT from 2009 to 2019. Trends and patterns of service provision were analysed using total counts and proportions over time. A Poisson regression model was used to explore changed in the rates of surgical treatment over time. The associations between volunteer activity and service provision was also investigated using correlation coefficients and linear regression. RESULTS: A total of 6365 patients (98% identifying as Aboriginal or Torres Strait Islander) were seen over the 10-year period with services being provided across 35 different communities in the Kimberley. Most services were provided to school-aged children, consistent with the programme's objectives. The peak preventive, restorative and surgical rates occurred among school-aged children, young adults and older adults respectively. A trend was observed indicating a reducing rate of surgical procedures from 2010 to 2019 (p < .001). The volunteer profile showed significant diversity beyond the conventional dentist-nurse structure and 40% being repeat volunteers. CONCLUSIONS: The KDT programme maintained a strong focus on service provision to school-aged children over the last decade with the educational and preventive components being central to the care being provided. This process evaluation found that the dose and reach of the KDT model grew with an increase in resources and was adaptive to perceived community need. The model was shown to evolve through gradual structural adaptations contributing to its overall fidelity.
Asunto(s)
Aborigenas Australianos e Isleños del Estrecho de Torres , Atención a la Salud , Anciano , Niño , Humanos , Adulto Joven , Australia , Voluntarios , Australia OccidentalRESUMEN
OBJECTIVES: To evaluate gingival phenotype (GP) and thickness (GT) using visual, probing, and ultrasound (US) methods and to assess the accuracy and consistency of clinicians to visually identify GP. MATERIALS AND METHODS: The GP and GT of maxillary and mandibular anterior teeth in 29 orthodontic patients (mean age 25 ± 7.5 years) were assessed using probing and US by a single examiner. General dentist and dental specialist assessors (n = 104) were shown intraoral photographs of the patients, including six repeated images, and asked to identify the GP via a questionnaire. RESULTS: An increasing trend in GT values of thin, medium, and thick biotype probe categories was found, though this was not statistically significant (P = .188). Comparison of probing method to determinations of GT made by US yielded slight agreement (κ = 0.12). Using the visual method, assessors' identification of the second GP determination ranged from poor to moderate agreement (κ = 0.29 to κ = 0.53). CONCLUSIONS: The probe method is sufficient in differentiating between different categories of GP. However, further research is required to assess the sensitivity of the probe method in recognizing phenotypes in the most marginal of cases. Assessors using the visual method lack the ability to identify GP accurately and consistently among themselves.
Asunto(s)
Encía , Incisivo , Humanos , Adolescente , Adulto Joven , Adulto , Encía/diagnóstico por imagen , Maxilar , Fotografía Dental , Ultrasonido , FenotipoRESUMEN
OBJECTIVES: To investigate the association between the width of keratinized gingiva (WKG), gingival phenotype (GP), and gingival thickness (GT) with craniofacial morphology in sagittal and vertical dimensions. MATERIALS AND METHODS: WKG, GP, and GT of mandibular anterior teeth in 177 preorthodontic patients (mean age 18.38 ± 5.16 years) were assessed clinically using a periodontal probe, a Colorvue Biotype Probe, and ultrasound by a single examiner. Patients were grouped into skeletal Class I, II, and III and hyperdivergent, normodivergent, and hypodivergent based on ANB and SN-MP angles. Mandibular incisor inclination (L1-NB) was also measured. Clinical and cephalometric measurements were repeated to assess inter- and intraexaminer reproducibility. RESULTS: A significant association was found between thin GP and skeletal Classes I and III for the left mandibular central incisor (MCI; P = .0183). In skeletal Class III patients, L1-NB angle demonstrated a decreasing trend as phenotype thickness decreased. A significant association was found between thin phenotype and normodivergent and hypodivergent groups for MCIs (left: P = .0009, right: P = .00253). No significant association between WKG or GT and craniofacial morphology was found. CONCLUSIONS: Thin GP is associated with skeletal Class I and III for the left MCI. Thin GP is associated with hypodivergent and normodivergent skeletal patterns for the MCIs. There was no association between WKG and GT and craniofacial morphology in both skeletal and vertical dimensions. Dental compensations that exist due to different craniofacial morphology may influence the GP.
Asunto(s)
Encía , Incisivo , Encía/diagnóstico por imagen , Incisivo/diagnóstico por imagen , Incisivo/anatomía & histología , Reproducibilidad de los Resultados , Mandíbula/diagnóstico por imagen , Mandíbula/anatomía & histología , CefalometríaRESUMEN
Objective The need to improve existing services to Aboriginal communities is prioritised by Australia's National Oral Health Plan. Although only an emerging area in dentistry, continuous quality improvement (CQI) approaches have positively impacted the delivery of primary health services to Aboriginal communities. This scoping review maps the applicability of CQI strategies to Aboriginal Australian oral healthcare services. Methods A scoping review was conducted and studies that reported using CQI approaches to improve existing oral health services or quality of care deemed relevant to Aboriginal Australian communities were included. Results A total of 73 articles were retrieved and eight articles were included in the final synthesis. Several CQI tools were identified, including: plan-do-study-act cycles, dental quality alliance measures, prioritisation matrices, causal mapping and the use of collective impact methodology. Conclusion Data exploring CQI in the context of Aboriginal oral health is scarce. The plan-do-study-act cycle and its variations show potential applicability to Aboriginal oral health care. However, for CQI approaches to be adequately implemented, the prevailing model of dental care requires a paradigm shift from quality assurance to quality improvement, acknowledging the impact of structural and process elements on care.
Asunto(s)
Servicios de Salud del Indígena , Mejoramiento de la Calidad , Australia , Atención a la Salud , Humanos , Nativos de Hawái y Otras Islas del Pacífico , Salud Bucal , Atención Primaria de Salud/métodosRESUMEN
OBJECTIVES: To identify changes in orthodontic management strategies in patients with hypodontia seen in 2000, 2010, and 2017/2018 (during a 1-year period). MATERIALS AND METHODS: An assessment of the panoramic radiographs of 3701 patients from a Western Australian private practice identified 276 individuals demonstrating hypodontia. The location of missing teeth, age, sex, type of malocclusion, and the management strategies (space closure or opening) for each patient were noted. RESULTS: Most hypodontia involved agenesis of three or fewer teeth (90%). Maxillary lateral incisors and mandibular second premolars were the most commonly missing teeth. Female preponderance was noted. When considering treatment, the odds ratio for orthodontic space opening and prosthetic replacement in 2000 was 3.266 (P value = 7e-04; 95% confidence interval [CI], 1.464-4.633) compared with patients seen in 2010 and 1.632 (P value = 7e-04; 95% CI, 0.811-2.434) compared with patients in 2017/2018. For patients demonstrating bilateral absence of maxillary lateral incisors, the odds ratio for orthodontic space opening was 3.185 (P value = 0.0215; 95% CI, 1.182-9.243) compared with counterparts with unilateral agenesis. None of the factors investigated were significantly associated with the types of treatment planned/provided for the patients with missing mandibular second premolars. CONCLUSIONS: Maxillary lateral incisors and mandibular second premolars were the most commonly missing teeth. A trend away from space opening and prosthetic replacement toward orthodontic space closure was observed from 2000 to 2017/2018. This may reflect a change in attitude toward prosthetic replacement options and/or greater optimism with biomechanical strategies since the implementation of temporary anchorage devices to assist in space closure.
Asunto(s)
Anodoncia , Incisivo , Anodoncia/diagnóstico por imagen , Anodoncia/terapia , Australia , Diente Premolar , Femenino , Humanos , Cierre del Espacio OrtodóncicoRESUMEN
OBJECTIVES: To assess changes in pulp blood flow (PBF) and pulp sensibility (PS) in teeth of patients with a history of dental trauma undergoing maxillary expansion. MATERIALS AND METHODS: Twenty-five patients requiring rapid maxillary expansion (RME) had the pulp status of their maxillary anterior teeth assessed using laser Doppler flowmetry, electric pulp testing, and thermal testing (CO2 snow). Each patient was tested at T1 (prior to expansion), T2 (2 weeks after rapid expansion), and T3 (3 months after expansion). Relationships between PBF, time interval, and history of trauma were evaluated using linear mixed modelling. RESULTS: Within the Trauma group, PBF was significantly lower (P ≤ .05) at T2 and T3 in comparison to T1 and significantly lower (P ≤ .05) at T2 in comparison to T3. In the Non-trauma group, PBF at T2 was significantly lower (P ≤ .05) than PBF at T1 and T3; however, no significant difference (P > .05) in PBF was observed when comparing PBF at T1 and T3. In both groups, PS was maintained in almost all teeth (>90%). CONCLUSIONS: RME in healthy teeth causes reduction of PBF before reestablishment of pretreatment values. RME in traumatized teeth causes reduction of PBF without PBF being reestablished to pretreatment levels. Teeth with a history of compromise may have reduced adaptive capacity under insults such as RME, which should be appreciated during the informed consent process.
Asunto(s)
Maxilar , Técnica de Expansión Palatina , Pulpa Dental , Estudios de Seguimiento , Humanos , Flujo Sanguíneo RegionalRESUMEN
BACKGROUND: Australian Aboriginal children experience high levels of dental caries (tooth decay) and are less likely to access preventive dental health services. High-strength fluoride varnish has been shown to reduce the incidence of dental caries and is commonly used in community-based preventive dental health service programs. In New South Wales, Australia, the application of fluoride varnish is restricted to dental and medical professionals. This is problematic in communities with a high Aboriginal population and limited access to oral health services, contributing to the increased risk of developing dental caries in Aboriginal children. Dental assistants are essential members of the oral health team; however, they do not have a defined scope of practice in Australia. Other countries have created formal scopes of practice for dental assistants to include the application of fluoride varnish. This protocol presents a pathway for qualified Aboriginal dental assistants to undertake additional training to legally apply fluoride varnish in New South Wales. The primary objective of this study will be to evaluate the feasibility and acceptability of utilising Aboriginal dental assistants to apply fluoride varnish to Aboriginal children in a school setting at regular 3-month intervals. METHODS: Six schools across New South Wales (NSW) that enrol at least 12% Aboriginal children will be invited to participate in the 12-month study. Aboriginal children aged 5-12 years enrolled in these schools will be enrolled in the study. Six Aboriginal dental assistants will undertake training to apply fluoride varnish. Fluoride varnish (Duraphat) will be applied at 3-month intervals by the dental assistants to the teeth using a small brush. An evaluation will be undertaken to determine the feasibility and cost-effectiveness of this innovative approach. This study protocol has been approved by the NSW Aboriginal Health and Medical Research Council and the NSW State Education Research Application Process. DISCUSSION: A qualified Aboriginal dental assistant workforce in NSW (or Australia) legally approved to apply fluoride varnish may increase the sustainability and scalability of fluoride varnish programs and improve the oral health of Aboriginal children in Australia. TRIAL REGISTRATION: ISRCTN26746753.
RESUMEN
Background. To assess the clinical efficacy of a dentifrice containing fluoride and functionalised tricalcium phosphate (fTCP) in reducing dentine sensitivity. Methods. A 10-week parallel blind randomised control trial was conducted. Subjects were assigned to one of four groups and instructed to brush twice daily: A: Colgate Cavity Protection (1000 ppmF-MFP); B: Sensodyne Total Care (1000 ppmF-NaF + 19300 ppmK(+)-KNO3); C: Clinpro Tooth Crème (950 ppmF-NaF + fTCP); and D: Clinpro Tooth Crème (brushing + additional topical application). Seventy-one patients were assessed at baseline, 6 weeks, and 10 weeks for cold, tactile, and hypertonic sensitivity using the NRS-11 pain rating scale. A combined modalities sensitivity score (CMS) was calculated. Results. At 6 weeks, patients reported the following reduction in CMS: A (20%); B (30%); C (42%); D (52%). At 10 weeks, patients reported the following reduction in CMS: A (18%), B (40%), C (24%), and D (54%). The only CMS comparisons to show a significant difference (P < 0.05) were between Groups A and D (6 and 10 weeks). Conclusions. Addition of fTCP to a dentifrice enhances the ability of dentifrice fluoride in reducing dentine sensitivity. Using Clinpro Tooth Crème twice daily for brushing can be as effective to reduce dentine sensitivity as twice daily brushing using Sensodyne Total Care. However, additional nightly topical application of fTCP, in addition to twice daily brushing, showed an enhanced reduction in dentine sensitivity.
RESUMEN
Aim. The aim of the study was to determine whether three fluoride containing resin composites could maintain fluoride release, fluoride recharge, and mechanical stability over long-term (18-month) aging. Materials and Methods. Fluoride containing composites Beautifil II, Gradia Direct X, Tetric EvoCeram, and glass ionomer Fuji IX Extra were analyzed. Specimens of each material were fabricated for two test groups: Group 1: bimonthly fluoride release/recharge analysis (n = 5); Group 2: hardness and elastic modulus analysis (n = 6). Nanoindentation was employed at 24 hours and at 1, 3, 6, 12, and 18 months. After 18 months, each specimen was immersed (recharged) in 5000 ppm NaF gel, and fluoride rerelease, hardness, and elastic modulus were measured. Results. Beautifil II and Gradia Direct X maintained fluoride release and recharge capability throughout 18-month aging (Beautifil II > Gradia Direct X > Tetric EvoCeram). The fluoride rerelease from Beautifil II following a 10-minute NaF recharge (at 18 months) was comparable to the long-term fluoride release from Fuji IX Extra. Elastic modulus and hardness did not change significantly (P > 0.05) with fluoride release, recharge, and water aging over 18 months for all three analyzed composites. Conclusions. The long-term fluoride release, fluoride recharge, and mechanical property stability of Beautifil II and Gradia Direct X render these composites suitable for load bearing restorations in high caries risk patients. Clinical Relevance. The ability for Beautifil II and Gradia Direct X to maintain fluoride release and fluoride recharge capability, despite long-term aging, raises the potential for unrestored tooth surfaces in contact with Beautifil II or Gradia Direct X restorations to demonstrate a reduced rate of caries incidence compared to unrestored surfaces adjacent to conventional nonfluoride containing composites.
RESUMEN
OBJECTIVES: In this study, the hypothesis that the polymerization shrinkage profile of "low shrinkage" non-methacrylate based composite; Silorane and "low shrinkage" high molecular mass methacrylate based composite; Kalore is not different from that of three conventional methacrylate based composites (Gradia Direct X, Filtek Supreme XT and Beautifil II) was tested. METHODS: Five commercially available composites were analysed: one "low shrinkage" non-methacrylate based composite (Silorane); one "low shrinkage" high molecular mass methacrylate based composite (Kalore) and three conventional methacrylate based composites (Gradia Direct X, Filtek Supreme XT and Beautifil II). Polymerization shrinkage was measured using an electromagnetic balance which recorded changes in composite buoyancy occurring due to volumetric changes during polymerization. This instrument allowed real time volumetric shrinkage measurements to be made at 40 ms intervals. RESULTS: All five resin composites demonstrated a similar volumetric shrinkage profile during polymerization. The rate of shrinkage of all five composites decreased from t=0 at a rate approximating x=t. After 170 s the rate of shrinkage of all five composites was at or below 0.01%/s. During the initial 5s of light exposure Silorane and Kalore exhibited a significantly lower (p<0.05) rate of contraction relative to the three conventional methacrylate composites. After 640 s of analysis, Silorane exhibited a significantly lower (p<0.05) percentage volumetric contraction compared to the other four analysed materials. CONCLUSIONS: The newly developed "low shrinkage" composites (Silorane, Kalore) in the present study demonstrated significantly lower (p<0.05) shrinkage rates and shrinkage volumes compared to the three conventional methacrylate composites. Investigation to identify whether polymerization shrinkage profile analysis is a good predictor of relative polymerization contraction stress levels generated by different composites, is warranted. CLINICAL SIGNIFICANCE: Clinicians making a resin composite selection with the view to minimizing the clinical effects of polymerization shrinkage must consider the rate of polymerization as well as the total volumetric shrinkage of a composite. Silorane (non methacrylate composite) and Kalore (high molecular mass methacrylate composite) have the ability to exhibit lower shrinkage rates and lower shrinkage volumes compared to conventional methacrylate composites.