Detection of the mineral constituents in human renal calculi by vibrational spectroscopic analysis combined with allied techniques Powder XRD, TGA, SEM, IR imaging and TXRF.

Detection of the mineral constituents in a batch of 310 samples of human urinary calculi (kidney stones-235 and bladder stones-75) combined with a semi-quantitative analysis has been presented on the basis of Fourier Transform based IR and Raman spectral measurements. Some of the observed characteristic IR and Raman bands have been proposed as 'Marker Bands' for the most reliable identification of the constituents. A detailed vibrational spectral analysis combined with a DFT level calculation for the functional groups in Calcium Oxalate Monohydrate (COM), Magnesium Ammonium Phosphate Hexahydrate (MAPH), Calcium Hydrogen Phosphate Dihydrate (CHPD), Penta-Calcium Hydroxy-Triphosphate (PCHT) and Uric Acid (UA) has been proposed. It has been shown that the identified mineral constituents as major or minor components can be deduced from the application of Lambert-Beer law of radiation absorption and results are in agreement with quantitative Spectral Data base. This simple method has the potential to be integrated into the management of Urolithiasis, a process of forming renal calculi in the kidney, bladder and/or urethra. Employment of powder XRD, TGA, SEM, TXRF and IR Imaging techniques has provided additional support for the proposed foolproof identification of the mineral constituents. Among the mineral constituents, Calcium Oxalate Monohydrate, Calcium Oxalate Dihydrate or their mixture account for 85% of the total number of samples; the remaining 15% and 5% samples contain Phosphate and Uric acid stones respectively.

CS/Au/MWCNT nanohybrid as an efficient carrier for the sustained release of 5-FU and a study of its cytotoxicity on MCF-7.

The chemical reduction method has been used to adeptly synthesize a CS/Au/MWCNT nanocomposite, to be used as a carrier for the effectual delivery of the anticancer drug 5-Fluorouracil. The work aims at utilizing the less investigated ternary nanocomposite system containing chitosan (CS), gold (Au) and MWCNT's to attain higher encapsulation efficiency and to enable a more sustained and prolonged release of 5-FU. This system has improved cytotoxicity when compared to the CS/Au binary system. The prepared sample has been characterized using various techniques that confirm the formation of the nanocomposite, encapsulation of 5-FU into the nanocomposite, the structure of 5-FU and Au in the nanocomposite and the formation of the polymer matrix nanocomposite. An increase in the encapsulation efficiency to 98% and loading efficiency to 43% is observed when compared to the binary composite, elucidating the importance of incorporation of carbon nanotubes into the nanocomposite. A reduction in the release percentage of 5-FU by 40% indicates a more prolonged release, which will enable a reduction of the number of dosages that need to be administered. This in turn leads to a reduction in the side effects posed by the drug 5-FU. Moreover, the effectiveness of the drug loaded nanocomposite system towards the inhibition of breast cancer cells, apparent from the attainment of 50% cell viability while taking sample concentrations as low as 25 µg ml-1, makes this ternary nanocomposite superior and significant.

Cyclodextrin based bone regenerative inclusion complex for resveratrol in postmenopausal osteoporosis.

Recent preclinical studies have shown that resveratrol (RSV), is a promising remedy for osteoporosis owing to its estrogenic, anti-inflammatory, and antioxidant properties. However, RSV has met limited success due to its poor oral bioavailability and inefficient systemic delivery. In this study, we prepared the inclusion complex of RSV with sulfo-butyl ether ß-cyclodextrin (SBE-ß-CD) to enhance the aqueous solubility of RSV. The in-silico docking studies and Physico-chemical characterization assays were performed to understand the interaction of RSV inside the SBE-ß-CD cavity. The in vivo safety assessment of RSV-SBE-ß-CD inclusion complex (R-CDIC) was performed in healthy Wistar rats. The efficacy of the inclusion complex against postmenopausal osteoporosis was further investigated in ovariectomized (OVX) rat model. The alteration in the bone micro-architectural structure was evaluated by microcomputed tomographic scanning, serum biochemical estimations, biomechanical strength and histopathological investigation. Administration of RSV-SBE-ß-CD inclusion complex was found to be safe and significantly improved micro-architectural deterioration induced by estrogen withdrawal. Results of bone morphometry and biomechanics study further emboldened the efficacy claim of the RSV-SBE-ß-CD complex. Thus, the present study demonstrated the efficacy of the RSV-SBE-ß-CD inclusion complex for treating osteolytic degradation in osteoporosis.

Self-assembled right handed helical ribbons of the bone mineral hydroxyapatite.

A self-assembled right handed helical ribbon of bone mineral, hydroxyapatite (HAp) was crystallized in sodium meta silicate gel matrix at 27 degrees C and the physiological pH (7.4). At temperatures 37 and 47 degrees C, helical structures were followed by many Liesegang rings. The samples were characterized by FT-IR, XRD, SEM, ICP-OES and TG-DTA techniques. The helical ribbon consisted of platy Ca-deficient apatite crystals of size 2.8 microm. Liesegang ring had a continuous network of fibers with interconnected pores. The samples exhibited bioactivity when soaked in SBF.

Hydrothermal synthesis of porous triphasic hydroxyapatite/(alpha and beta) tricalcium phosphate.

A novel, porous triphasic calcium phosphate composed of nonresorbable hydroxyapatite (HAp) and resorbable tricalcium phosphate (alpha- and beta-TCP) has been synthesized hydrothermally at a relatively low temperature. The calcium phosphate precursor for hydrothermal treatment was prepared by gel method in the presence of ascorbic acid. XRD, FT-IR, Raman analyses confirmed the presence of HAp/TCP. The surface area and average pore size of the samples were found to be 28 m2/g and 20 nm, respectively. The samples were found to be bioactive in simulated body fluid (SBF).

Preparation of thermally stable nanocrystalline hydroxyapatite by hydrothermal method.

Thermally stable hydroxyapatite (HAp) was synthesized by hydrothermal method in the presence of malic acid. X-ray diffraction (XRD), Fourier transform infra-red spectroscopy (FT-IR), Raman spectroscopy, scanning electron microscopy (SEM), differential thermal analysis (DTA), thermogravimetric analysis (TGA) was done on the synthesized powders. These analyses confirmed the sample to be free from impurities and other phases of calcium phosphates, and were of rhombus morphology along with nanosized particles. IR and Raman analyses indicated the adsorption of malic acid on HAp. Thermal stability of the synthesized HAp was confirmed by DTA and TGA. The synthesized powders were thermally stable upto 1,400 degrees C and showed no phase change. The proposed method might be useful for producing thermally stable HAp which is a necessity for high temperature coating applications.

Investigations on the in vitro bioactivity of swift heavy oxygen ion irradiated hydroxyapatite.

The effect of swift heavy oxygen ion irradiation of hydroxyapatite on its in vitro bioactivity was studied. The irradiation experiment was performed using oxygen ions at energy of 100 MeV with 1 x 10(12) and 1 x 10(13) ions/cm2 fluence range. The irradiated samples were characterized by glancing angle X-ray diffraction (GXRD), photoluminescence spectroscopy (PL) and scanning electron microscopy (SEM). GXRD showed that irradiated samples exhibited better crystallinity. The irradiated samples revealed an increase in PL intensity. In addition, the irradiated hydroxyapatite was found to have enhanced bioactivity.

Biomimetic fabrication of mineralized composite films of nanosilver loaded native fibrillar collagen and chitosan.

Silver nanoparticles loaded fibrillar collagen-chitosan matrix (CC) was prepared by biomimetic approach by blending silver nanoparticles (tAgNPs), collagen fibril and chitosan hydrogel followed by cross-linking and biomineralization. Electron micrograph showed that the surface of the composites exhibited native fibrillar morphology of collagen and their cross-section revealed layer-like arrangement of native fibrillar collagen. The mineralized composites exhibited surface mineralization of calcium phosphates incorporated with magnesium. FT-IR ATR analysis revealed the uniform blending of collagen and chitosan without any chemical interaction between them. XRD analysis showed incorporation of silver nanoparticles and lamellar structure of collagen and chitosan. The mechanical property of the dry composite film showed increase in tensile strength with the addition of chitosan and raised to 4.6 fold in M-CC4 composite. The incorporation of chitosan in M-CC3 led to 2.2 fold increase in mineralization as confirmed by the TGA analysis. Contact angle analysis revealed the hydrophilic nature of the composite. Hemolysis analysis of the composites verified the hemocompatible nature of composites with hemolysis < 5%. MTT assay for the composites was carried by seeding MG-63 cells and indicated cell viability > 80%. Antibacterial activity analysis showed the percent growth inhibition of about 27% and 37% for S. aureus and E. coli respectively. The prepared composite would possess silver nanoparticles loaded collagen fibril in the native state and the formed biomineral will be similar to the bone mineral. Hence the fabricated composite -could be used as a biomaterial for bone tissue engineering applications.

Agarose encapsulated mesoporous carbonated hydroxyapatite nanocomposites powder for drug delivery.

The powder composites are predominantly used for filling of voids in bone and as drug delivery carrier to prevent the infection or inflammatory reaction in the damaged tissues. The objective of this work was to study the synthesis of agarose encapsulation on carbonated hydroxyapatite powder and their biological and drug delivery properties. Mesoporous, nanosized carbonated hydroxyapatite/agarose (CHAp/agarose) powder composites were prepared by solvothermal method and subsequently calcined to study the physico-chemical changes, if it subjected to thermal exposure. The phase of the as-synthesized powder was CHAp/agarose whereas the calcinated samples were non-stoichiometric HAp. The CHAp/agarose nanorods were of length 10-80nm and width 40-190nm for the samples synthesized at temperatures 120°C (ST120) and 150°C (ST150). The calcination process produced spheres (10-50nm) and rods with reduced size (40-120nm length and 20-30nm width). Composites were partially dissolved in SBF solution followed by exhibited better bioactivity than non-stoichiometric HAp confirmed by gravimetric method. Hemo and biocompatibility remained unaffected by presence of agarose or carbonate in the HAp. Specific surface area of the composites was high and exhibited an enhanced amoxicillin and 5-fluorouracil release than the calcined samples. The composites demonstrated a strong antimicrobial activity against E. coli, S. aureus and S. epidermidis. The ST120 showed prolonged drug (AMX and 5-Fcil) release and antimicrobial efficacy than ST150 and calcined samples. This technique would be simple and rapid for composites preparation, to produce high quality crystalline, resorbable, mesoporous and bioactive nanocomposite (CHAp/agarose) powders. This work provides new insight into the role of agarose coated on bioceramics by solvothermal technique and suggests that CHAp/agarose composites powders are promising materials for filling of void in bone and drug delivery applications.

Green synthesis of Si-incorporated hydroxyapatite using sodium metasilicate as silicon precursor and in vitro antibiotic release studies.

The aim of the current study is to synthesize nanosized silicon incorporated HAp (Si-HAP) using sodium metasilicate as the silicon source. The sol-gel derived samples were further subjected to microwave irradiation. Incorporation of Si into HAp did not alter the HAp phase, as confirmed by the X-ray diffraction analysis (XRD). Moreover, variation in the lattice parameters of the Si-incorporated HAp indicates that Si is substituted into the HAp lattice. The decrease in the intensity of the peaks attributed to hydroxyl groups, which appeared in the FTIR and Raman spectra of Si-HAp, further confirms the Si substitution in HAp lattices. The silicon incorporation enhanced the nanorods length by 70%, when compared to that of pure HAp. Microwave irradiation improved the crystallinity of Si-HAp when compared to as-synthesized Si-HAp samples. As-synthesized Si-incorporated HAp sample showed an intense blue emission under UV excitation. Microwave irradiation reduced the intensity of blue emission and exhibited red shift due to the reduction of defects in the Si-HAp crystal. The morphological change from rod to spherical and ribbon-like forms was observed with an increase in silicon content. Further, Si-HAp exhibited better bioactivity and low dissolution rate. Initially there was a burst release of amoxicillin from all the samples, subsequently it followed a sustained release. The microwave-irradiated HAp showed extended period of sustained release than that of as-synthesized HAp and Si-HAp. Similarly, the microwave-irradiated Si-incorporated samples exhibited prolonged drug release, as compared to that of the as-synthesized samples. Hence, Si-HAp is rapidly synthesized by a simple and cost effective method without inducing any additional phases, as compared to the conventional sintering process. This study provides a new insight into the rapid green synthesis of Si-HAp. Si-HAp could emerge as a promising material for the bone tissue replacement and as a drug delivery system.

Chemical and structural analysis of gallstones from the Indian subcontinent.

Representative gallstones from north and southern parts of India were analyzed by a combination of physicochemical methods: X-ray diffraction (XRD), infrared spectroscopy (IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), CHNS analysis, thermal analysis and Nuclear Magnetic Resonance (NMR) spectroscopy (1H and 13C). The stones from north Indian were predominantly consisting of cholesterol monohydrate and anhydrous cholesterol which was confirmed by XRD analysis. FTIR spectroscopy confirmed the presence of cholesterol and calcium bilirubinate in the south Indian gallstones. EDX spectroscopy revealed the presence of carbon, nitrogen, oxygen, calcium, sulfur, sodium and magnesium and chloride in both south Indian and north Indian gallstones. FTIR and NMR spectroscopy confirmed the occurrence of cholesterol in north Indian gallstones. The respective colour of the north Indian and south Indian gallstones was yellowish and black. The morphology of the constituent crystals of the north Indian and south Indian gallstones were platy and globular respectively. The appreciable variation in colour, morphology and composition of south and north Indian gallstones may be due to different food habit and habitat.

Physicochemical analysis of urinary stones from Dharmapuri district.

Nephrolithiasis is a common disease caused by the multifactorial components such as geographical location, bacterial infection, low urine volume, and low intake of water. This disease induces severe metabolic abnormalities in the human body. As the prevalence of this disease was high in Dharmapuri district located in Tamil Nadu, urinary stones removed from the patients pertaining to this district were collected and to identify the toxic elements present in the stones. The presence of functional groups and phases of the stones were analyzed using X-ray diffraction (XRD), Fourier transform Raman spectroscopy and Fourier transform infrared spectroscopy (FT-IR). The majority of stones were found to be calcium oxalate monohydrate (COM) and mixed stones having minor existence of struvite and uric acid. Hexagonal shaped COM crystals, needle shaped uric acid crystals and layered arrangement of struvite crystals in the core region were revealed by Scanning Electron Microscopy (SEM). Thermo Gravimetric Analysis (TGA) was used to determine the thermal stability and the hardness of the stone which was measured using Vickers hardness (HV). The presence of toxic elements in stones such as zirconium and mercury was identified using Energy Dispersive X-ray Spectroscopy (EDS). The EDS analysis showed higher concentration of zirconium in the core region compared to the periphery. The percentage of zirconium was relatively high compared to other toxic elements in the stones. The Vickers hardness results indicated that high HV values in the core region than the periphery and this might be due to the presence of zirconium.