Supramolecular Organization and siRNA Binding of Hyaluronic Acid-Coated Lipoplexes for Targeted Delivery to the CD44 Receptor.

The dynamics of the formation of siRNA-lipoplexes coated with hyaluronic acid (HA) and the parameters influencing their supramolecular organization were studied. The insertion of a HA-dioleylphosphatidylethanolamine (DOPE) conjugate in the liposome structure as well as subsequent complexation with siRNA increased the liposome size. Lipoplexes were around 110 nm at high ± charge ratios with a zeta potential around +50 mV and around 230 nm at low ± ratios, with a zeta potential that decreased to negative values, reaching -45 mV. The addition of the conjugate did not compromise siRNA binding to liposomes, although these nucleic acids induced a displacement of part of the HA-DOPE conjugate upon lipoplex formation, as confirmed by capillary electrophoresis. Isothermal titration calorimetry, X-ray diffraction studies, and cryo-TEM microscopy demonstrated that in addition to electrostatic interactions with siRNA a rearrangement of the lipid bilayers takes place, resulting in condensed oligolamellar vesicles. This phenomenon is dependent on the number of siRNA molecules and the degree of modification with HA. Finally, the suitable positioning of HA on the lipoplex surface and its ability to bind specifically to the CD44 receptors in a concentration-dependent manner was demonstrated by surface plasmon resonance analysis.

Design and characterization of sustained release ketoprofen entrapped carnauba wax microparticles.

CONTEXT: Ketoprofen is a non-steroid anti-inflammatory drug (NSAID) used in the treatment of rheumatic diseases and in mild to moderate pain. Ketoprofen has a short biological half-life and the commercially available conventional release formulations require dosages to be administered at least 2-3 times a day. Due to these characteristics, ketoprofen is a good candidate for the preparation of controlled release formulations. OBJECTIVES: In this work, a multiparticulate-sustained release dosage form containing ketoprofen in a carnauba wax matrix was developed. METHODS: Particles were prepared by an emulsion congealing technique. System variables were optimized using fractional factorial and response surface experimental design. Characterization of the particles included size and morphology, flow rate, drug loading and in vitro drug release. RESULTS: Spherical particles were obtained with high drug load and sustained drug release profile. The optimized particles had an average diameter of approximately 200 µm, 50% (w/w) drug load, good flow properties and prolonged ketoprofen release for more than 24 h. CONCLUSIONS: Carnauba wax microspheres prepared in this work represent a new multiparticulate-sustained release system for the NSAID ketoprofen, exhibiting good potential for application in further pharmaceutical processes.

Protective effect of sucupira oil nanoemulsion against oxidative stress in UVA-irradiated HaCaT cells.

OBJECTIVES: Bioactive molecules derived from natural products combine the ability to absorb UV light and act as antioxidants. We developed an oil-based sucupira (native species of the Brazilian cerrado) nanoemulsion (NE) using a high-energy emulsification method and assessed its effectiveness in vitro. METHODS: An easily scalable high-pressure homogenization method was used to prepare the formulation. NE droplets mean diameter, pH, stability, conductivity and morphology were analysed. Formulation bioactivity was assessed using HaCaT cells. KEY FINDINGS: The formulation presented suitable pH and size for topic administration and was stable for over 90 days upon storage at 4, 25 and 45°C. The NE showed protective effect against oxidative stress and reduced levels of UVA-induced pro-inflammatory cytokines IL-6 and IL-8. CONCLUSIONS: A novel, stable and easily prepared formulation was obtained for encapsulation of sucupira oil. The protective effect of the formulation by cytokine inhibition in the early stage of the inflammatory process was shown in vitro. Combined with the antioxidant effect by inhibition of reactive oxygen species, the use of sucupira oil NE for prevention and treatment of UVA-induced stress could contribute to decrease the effects of UV radiation on skin ageing.

Thermoreversible mucoadhesive polymer-drug dispersion for sustained local delivery of budesonide to treat inflammatory disorders of the GI tract.

Mucoadhesive drug formulations have been studied and used as alternatives to conventional formulations in order to achieve prolonged retention at the intended site. In addition to providing a controlled drug release, several drugs and disease conditions might benefit from mucoadhesive formulations, contributing to better therapeutic outcomes. Here, we describe the development and the in vitro/in vivo characterization of a mucoadhesive in situ gellifying formulation using PF127, a thermo reversible polymer, entrapping budesonide (BUD), a potent corticosteroid used for the treatment of a wide range of inflammatory diseases, including those affecting mucosas, such as in the GI tract. PF127 formulations (15-17%) were successfully prepared by a cold method as a thermo reversible in situ gelling dispersion for mucosal drug delivery, as confirmed by DSC. Sol-gel temperatures of PF127 formulations (25-39 °C) were observed by dynamic gelation and determined by microrheology and oscillatory rheometry. X-ray diffractograms and TEM images showed that BUD was completely solubilized within the polymeric micelles. In vitro, the gels showed 5-14 g force of mucoadhesion, and the ex vivo studies confirmed that the formulation efficiently adhered to the mucosa. Histopathological analysis combined with fluorescence images and ex vivo intestinal permeation confirmed that the formulation remained on the TGI mucosa for at least 4 h after administration. In vivo studies conducted in a murine model of intestinal mucositis demonstrated that the 16% PF127 BUD formulation was able to resolve the inflammatory injury in the intestinal mucosa. Results demonstrate that fine-tuning of PF127 formulations along with adequate selection of the drug agent, thorough characterization of the dispersions and their interactions with biological interfaces leads to the development of effective controlled drug delivery systems targeted to GI inflammatory diseases.

In Vivo Vaginal Fungal Load Reduction After Treatment with Itraconazole-Loaded Polycaprolactone-Nanoparticles.

Itraconazole (ITZ) has a broad spectrum of action and is commonly used for the treatment of fungal infections. Topic administration of ITZ is a promising strategy to improve vulvovaginal candidiasis treatment, which can be further optimized by its encapsulation in nanoparticles to increase drug delivery and reduce ITZ toxicity. In this work, we designed polycaprolactone nanoparticles containing ITZ and evaluated in vivo the efficacy of this yet unexplored approach. Nanocapsules (ITZ-NC) and nanospheres (ITZ-NS) were obtained by nanoprecipitation. ITZ-NC presented encapsulation efficiency of 99%, mean diameter of 190 nm, PDI 0.1 and zeta potential of -15 mV. ITZ-NS showed encapsulation efficiency of 97%, mean diameter of 120 nm, PDI 0.1 and zeta potential of -10 mV. Both particles were efficiently freeze-dried using 10% trehalose + 10% sucrose. Nanoparticles were then incorporated in a viscous formulation for vaginal application in female Balb/C mice infected with Candida albicans. Fungal load was significantly reduced in infected animals after treatment with ITZ-NC but not with ITZ-NS, compared to animals treated with ITZ solution. Histological analysis showed a clear difference between vaginal tissues of ITZ-NC and ITZ-NS and ITZ solution-treated animals, which correlated with IL-1ß and TNF-α quantification. Animals treated with ITZ-NC showed reduced cytokine levels and healthy tissue characteristics, while animals treated with ITZ-NS and ITZ solution showed increased IL-1ß and TNF-α levels and typical tissue inflammation. Our results demonstrate the potential of ITZ-NC to improve the treatment of vulvovaginal candidiasis after topical application in the vagina, opening new perspectives for the treatment of this disease.

Polysaccharide-coated liposomes by post-insertion of a hyaluronan-lipid conjugate.

Hyaluronan (MW: 1.5 MDa) was linked to a phospholipid (dipalmitoyl phosphatidylethanolamine, DPPE) by an amidification procedure to obtain novel macromolecules (HA-DPPE) able to coat liposomes. Liposomes made of dipalmitoyl phosphatidylcholine and cholesterol (DPPC/Chol: 95/5 molar ratio), with a mean size around 100nm, were incubated with HA-DPPE at 55°C, allowing the insertion of DPPE moieties in the liposomal bilayer and leading to hyaluronan-coated liposomes (HAsomes) as evidenced by several techniques including dynamic light scattering and differential scanning calorimetry. The amount or HA-DPPE coating liposomes was quantified by different methods among which capillary electrophoresis and their stability in serum was finally compared to that of plain liposomes. As a conclusion, we provide insight into the physico-chemical characterization of HA-DPPE and of HAsomes demonstrating that easy coating of phospholipid vesicles can be achieved by post-insertion of a lipid derivative of hyaluronan. This approach represents an innovative strategy for coating vesicular systems to confer them simultaneously with long circulation properties and selective targeting towards HA-receptors.

Compared in vivo toxicity in mice of lung delivered biodegradable and non-biodegradable nanoparticles.

To design nanoparticle (NP)-based drug delivery systems for pulmonary administration, biodegradable materials are considered safe, but their potential toxicity is poorly explored. We here explore the lung toxicity in mice of biodegradable nanoparticles (NPs) and compare it to the toxicity of non-biodegradable ones. NP formulations of poly(d,l-lactide-co-glycolide) (PLGA) coated with chitosan (CS), poloxamer 188 (PF68) or poly(vinyl alcohol) (PVA), which renders 200 nm NPs of positive, negative or neutral surface charge respectively, were analyzed for their biodistribution by in vivo fluorescence imaging and their inflammatory potential after single lung nebulization in mice. After exposure, analysis of bronchoalveolar lavage (BAL) cell population, protein secretion and cytokine release as well as lung histology were carried out. The inflammatory response was compared to the one induced by non-biodegradable counterparts, namely, TiO2 of rutile and anatase crystal form and polystyrene (PS). PLGA NPs were mostly present in mice lungs, with little passage to other organs. An increase in neutrophil recruitment was observed in mice exposed to PS NPs 24 h after nebulization, which declined at 48 h. This result was supported by an increase in interleukin (IL)-6 and tumor necrosis factor α (TNFα) in BAL supernatant at 24 h. TiO2 anatase NPs were still present in lung cells 48 h after nebulization and induced the expression of pro-inflammatory cytokines and the recruitment of polymorphonuclear cells to BAL. In contrast, regardless of their surface charge, PLGA NPs did not induce significant changes in the inflammation markers analyzed. In conclusion, these results point out to a safe use of PLGA NPs regardless of their surface coating compared to non-biodegradable ones.