Harvesting of aerial humidity with natural hygroscopic salt excretions.

Plants and animals that thrive in arid regions utilize the diurnal changes in environmental temperature and humidity to optimize their water budget by combining water-harvesting mechanisms and morphophysiological traits. The Athel tamarisk (Tamarix aphylla) is a halophytic desert shrub that survives in arid, hypersaline conditions by excreting concentrated solutions of ions as droplets on its surface that crystallize into salt crystals and fall off the branches. Here, we describe the crystallization on the surface of the plant and explore the effects of external conditions such as diurnal changes in humidity and temperature. The salt mixtures contain at least ten common minerals, with NaCl and CaSO4·2H2O being the major products, SiO2 and CaCO3 main sand contaminants, and Li2SO4, CaSO4, KCl, K2Ca(SO4)2·H2O, CaMg(CO3)2 and AlNaSi3O8 present in smaller amounts. In natural conditions, the hanging or sitting droplets remain firmly attached to the surface, with an average adhesion force of 275 ± 3.5 µN measured for pure water. Rather than using morphological features of the surface, the droplets adhere by chemical interactions, predominantly by hydrogen bonding. Increasing ion concentration slightly increases the contact angle on the hydrophobic cuticle, thereby lowering surface wettability. Small amounts of lithium sulfate and possibly other hygroscopic salts result in strong hygroscopicity and propensity for deliquescence of the salt mixture overnight. Within a broader context, this natural mechanism for humidity harvesting that uses environmentally benign salts as moisture adsorbents could provide a bioinspired approach that complements the currently available water collection or cloud-seeding technologies.

Flexible molecular crystals for optoelectronic applications.

The cornerstones of the advancement of flexible optoelectronics are the design, preparation, and utilization of novel materials with favorable mechanical and advanced optoelectronic properties. Molecular crystalline materials have emerged as a class of underexplored yet promising materials due to the reduced grain boundaries and defects anticipated to provide enhanced photoelectric characteristics. An inherent drawback that has precluded wider implementation of molecular crystals thus far, however, has been their brittleness, which renders them incapable of ensuring mechanical compliance required for even simple elastic or plastic deformation of the device. It is perplexing that despite a plethora of reports that have in the meantime become available underpinning the flexibility of molecular crystals, the "discovery" of elastically or plastically deformable crystals remains limited to cases of serendipitous and laborious trial-and-error approaches, a situation that calls for a systematic and thorough assessment of these properties and their correlation with the structure. This review provides a comprehensive and concise overview of the current understanding of the origins of crystal flexibility, the working mechanisms of deformations such as plastic and elastic bending behaviors, and insights into the examples of flexible molecular crystals, specifically concerning photoelectronic changes that occur in deformed crystals. We hope this summary will provide a reference for future experimental and computational efforts with flexible molecular crystals aimed towards improving their mechanical behavior and optoelectronic properties, ultimately intending to advance the flexible optoelectronic technology.

Ferroelastic Control of the Multicolor Emission from a Triply Doped Organic Crystal.

Emission from crystalline organic solids is often quenched by nonemissive energy-transfer deexcitation processes. While dispersion of fluorophores in polymers or other hosts has been used to enhance the emission intensity, this strategy results in randomization of guest orientation and optical losses at grain boundaries. Here, we report the doping of inherently nonemissive single crystals of anilinium bromide with three fluorescent organic molecules. The doping process equips the crystal with emission characteristics that tune from blue to deep orange. The emission intensity can be reversibly modulated by ferroelastic twinning, which causes the material to function as a multiemissive force sensor. This approach opens up new pathways in the manipulation of emissive properties in organic crystals and may have substantial implications for optoelectronic devices and sensors.

Spectrochemistry of Firefly Bioluminescence.

The chemical reactions underlying the emission of light in fireflies and other bioluminescent beetles are some of the most thoroughly studied processes by scientists worldwide. Despite these remarkable efforts, fierce academic arguments continue around even some of the most fundamental aspects of the reaction mechanism behind the beetle bioluminescence. In an attempt to reach a consensus, we made an exhaustive search of the available literature and compiled the key discoveries on the fluorescence and chemiluminescence spectrochemistry of the emitting molecule, the firefly oxyluciferin, and its chemical analogues reported over the past 50+ years. The factors that affect the light emission, including intermolecular interactions, solvent polarity, and electronic effects, were analyzed in the context of both the reaction mechanism and the different colors of light emitted by different luciferases. The collective data points toward a combined emission of multiple coexistent forms of oxyluciferin as the most probable explanation for the variation in color of the emitted light. We also highlight realistic research directions to eventually address some of the remaining questions related to firefly bioluminescence. It is our hope that this extensive compilation of data and detailed analysis will not only consolidate the existing body of knowledge on this important phenomenon but will also aid in reaching a wider consensus on some of the mechanistic details of firefly bioluminescence.

Performance of molecular crystals in conversion of light to mechanical work.

Dynamic molecular crystals have recently received ample attention as an emerging class of energy-transducing materials, yet have fallen short of developing into fully realized actuators. Through the trans-cis surface isomerization of three crystalline azobenzene materials, here, we set out to extensively characterize the light-to-work energy conversion of photoinduced bending in molecular crystals. We distinguish the azobenzene single crystals from commonly used actuators through quantitative performance evaluation and specific performance indices. Bending molecular crystals have an operating range comparable to that of microactuators such as microelectromechanical systems and a work-generating capacity and dynamic performance that qualifies them to substitute micromotor drivers in mechanical positioning and microgripping tasks. Finite element modeling, applied to determine the surface photoisomerization parameters, allowed for predicting and optimizing the mechanical response of these materials. Utilizing mechanical characterization and numerical simulation tools proves essential in accelerating the introduction of dynamic molecular crystals into soft microrobotics applications.

Natural Product Isolation of the Extract of Cleome rupicola Fruits Exhibiting Antioxidant Activity.

Cataracts are the leading cause of blindness worldwide, however, there is currently no drug-based treatment. Plants that exhibit antioxidant properties have shown promising anticataract effects, likely because they supplement the activity of glutathione, the major antioxidant in lens cells. An extract of Cleome rupicola, a desert plant found in the United Arab Emirates, has traditionally been used to treat cataracts. Phytochemical screening of the aqueous extract established the presence of flavonoids, tannins, steroid derivatives, and reducing sugars. Fractioning of extracts from the fruits using high-performance liquid chromatography (HPLC) yielded the isolation of the anthelmintic compound cleomin, and its structure was confirmed using mass spectrometry (MS) and nuclear magnetic resonance (NMR) spectroscopy.

Mechanical properties and peculiarities of molecular crystals.

In the last century, molecular crystals functioned predominantly as a means for determining the molecular structures via X-ray diffraction, albeit as the century came to a close the response of molecular crystals to electric, magnetic, and light fields revealed that the physical properties of molecular crystals were as rich as the diversity of molecules themselves. In this century, the mechanical properties of molecular crystals have continued to enhance our understanding of the colligative responses of weakly bound molecules to internal frustration and applied forces. Here, the authors review the main themes of research that have developed in recent decades, prefaced by an overview of the particular considerations that distinguish molecular crystals from traditional materials such as metals and ceramics. Many molecular crystals will deform themselves as they grow under some conditions. Whether they respond to intrinsic stress or external forces or interactions among the fields of growing crystals remains an open question. Photoreactivity in single crystals has been a leading theme in organic solid-state chemistry; however, the focus of research has been traditionally on reaction stereo- and regio-specificity. However, as light-induced chemistry builds stress in crystals anisotropically, all types of motions can be actuated. The correlation between photochemistry and the responses of single crystals-jumping, twisting, fracturing, delaminating, rocking, and rolling-has become a well-defined field of research in its own right: photomechanics. The advancement of our understanding requires theoretical and high-performance computations. Computational crystallography not only supports interpretations of mechanical responses, but predicts the responses itself. This requires the engagement of classical force-field based molecular dynamics simulations, density functional theory-based approaches, and the use of machine learning to divine patterns to which algorithms can be better suited than people. The integration of mechanics with the transport of electrons and photons is considered for practical applications in flexible organic electronics and photonics. Dynamic crystals that respond rapidly and reversibly to heat and light can function as switches and actuators. Progress in identifying efficient shape-shifting crystals is also discussed. Finally, the importance of mechanical properties to milling and tableting of pharmaceuticals in an industry still dominated by active ingredients composed of small molecule crystals is reviewed. A dearth of data on the strength, hardness, Young's modulus, and fracture toughness of molecular crystals underscores the need for refinement of measurement techniques and conceptual tools. The need for benchmark data is emphasized throughout.

Flexible Organic Chiral Crystals with Thermal and Excitation Modulation of the Emission for Information Transmission, Writing, and Storage.

Organic single crystals quickly emerge as dense yet light and nearly defect-free media for emissive elements. Integration of functionalities and control over the emissive properties is currently being explored for a wide range of these materials to benchmark their performance against organic emissive materials diluted in powders or films. Here, we report mechanically flexible emissive chiral organic crystals capable of an unprecedented combination of fast, reversible, and low-fatigue responses. UV-excited single crystals of both enantiomers of the material, 4-chloro-2-(((1-phenylidene)imino)methyl)phenol, exhibit a drastic yet reversible change in the emission color from green to orange-yellow within a second and can be cycled at least 2000 times. The photoresponse was found to depend strongly on the excitation intensity and temperature. Combining chirality, mechanical compliance, rapid emission switching, multiple responses, and writability by UV light, this material provides a unique and versatile platform for developing organic crystal-based materials for on-demand signal transfer, information storage, and cryptography.

A Thermosalient and Mechanically Compliant Organic Crystalline Optical Waveguide Switcher.

The dense and ordered molecular arrangements endow dynamic molecular crystals with fast response, rapid energy conversion, low energy dissipation, and strong coupling between heat/light and mechanical energy. Most of the known dynamic crystals can only respond to a single stimulus, and materials that can respond to multiple stimuli are rare. Here, we report an organic crystalline material that can be bent plastically and is also thermosalient, as its crystals can move when they undergo a reversible phase transition. The crystals transmit light regardless of their shape or crystalline phase. The combination of light transduction and reversible thermomechanical deformation provides an opportunity to switch the waveguiding capability of the material in a narrow temperature range, which holds a tremendous potential for applications in heat-averse electronic components, such as central processing units. Unlike existing electronics, the material we report here is completely organic and therefore much lighter, potentially reducing the overall weight of electronic circuits.

Bending, Twisting, and Propulsion of Photoreactive Crystals by Controlled Gas Release.

The rapid release of gas by a chemical reaction to generate momentum is one of the most fundamental ways to elicit motion that could be used to sustain and control the motility of objects. We report that hollow crystals of a three-dimensional supramolecular metal complex that releases gas by photolysis can propel themselves or other objects and advance in space when suspended in mother solution. In needle-like regular crystals, the reaction occurs mainly on the surface and results in the formation of cracks that evolve due to internal pressure; the expansion on the cracked surface of the crystal results in bending, twisting, or coiling of the crystal. In hollow crystals, gas accumulates inside their cavities and emanates preferentially from the recess at the crystal terminus, propelling the crystals to undergo directional photomechanical motion through the mother solution. The motility of the object which can be controlled externally to perform work delineates the concept of "crystal microbots", realized by photoreactive organic crystals capable of prolonged directional motion for actuation or delivery. Within the prospects, we envisage the development of a plethora of light-weight, efficient, autonomously operating robots based on organic crystals with high work capacity where motion over large distances can be attained due to the large volume of latent gas generated from a small volume of the crystalline solid.

Strategies to Diversification of the Mechanical Properties of Organic Crystals.

Structurally ordered soft materials that respond to complementary stimuli are susceptible to control over their spatial and temporal morphostructural configurations by intersectional or combined effects such as gating, feedback, shape-memory, or programming. In the absence of general and robust design and prediction strategies for their mechanical properties, at present, combined chemical and crystal engineering approaches could provide useful guidelines to identify effectors that determine both the magnitude and time of their response. Here, we capitalize on the purported ability of soft intermolecular interactions to instigate mechanical compliance by using halogenation to elicit both mechanical and photochemical activity of organic crystals. Starting from (E)-1,4-diphenylbut-2-ene-1,4-dione, whose crystals are brittle and photoinert, we use double and quadruple halogenation to introduce halogen-bonded planes that become interfaces for molecular gliding, rendering the material mechanically and photochemically plastic. Fluorination diversifies the mechanical effects further, and crystals of the tetrafluoro derivative are not only elastic but also motile, displaying the rare photosalient effect.

Intersectional Effects of Crystal Features on the Actuation Performance of Dynamic Molecular Crystals.

Despite being researched for decades, shape-shifting molecular crystals have yet to claim their spot as an actuating materials class among the primary functional materials. While the process for developing and commercializing materials can be lengthy, it inevitably starts with building an extensive knowledge base, which for molecular crystal actuators remains scattered and disjointed. Using machine learning for the first time, we identify inherent features and structure-function relationships that fundamentally impact the mechanical response of molecular crystal actuators. Our model can factor in different crystal properties in tandem and decipher their intersectional and combined effects on each actuation performance. This analysis is an open invitation to utilize interdisciplinary expertise in translating the current basic research on molecular crystal actuators into technology-based development that promotes large-scale experimentation and prototyping.

The Elusive Structure of Levocetirizine Dihydrochloride Determined by Electron Diffraction.

Levocetirizine is an orally administrated, second-generation antihistaminic active pharmaceutical ingredient that has been used to treat symptoms of allergy and long-term hives for over 25 years. Despite the wide use of this compound, its crystal structure has remained unknown. Here we report the application of 3D electron diffraction (3D ED)/Micro-crystal electron diffraction (MicroED) to determine the crystal structure of Levocetirizine dihydrochloride directly from crystalline powders that were extracted from commercially available tablets containing the compound. We also showcase the utility of dynamical refinement to unambiguously assign absolute configuration. The results highlight the immense potential of 3D ED/MicroED for structure elucidation of components of microcrystalline mixtures that obviates the need to grow large-size single crystals and the use of complementary analytical techniques, which could be important for identification as well as for primary structural characterization.

Elastic Organic Crystals as Bioinspired Hair-Like Sensors.

One of the typical haptic elements are natural hairy structures that animals and plants rely on for feedback. Although these hair sensors are an admirable inspiration, the development of active flow sensing components having low elastic moduli and high aspect ratios remains a challenge. Here, we report a new sensing approach based on a flexible, thin and optically transmissive organic crystal of high aspect ratio, which is stamped with fluorescent dye for tracking. When subjected to gas flow and exposed to laser, the crystal bends due to exerted pressure and acts as an optical flow (hair) sensor with low detection limit (≈1.578 m s-1 ) and fast response time (≈2.70 s). The air-flow-induced crystal deformation and flow dynamics response are modelled by finite element analysis. Due to having a simple design and being lightweight and mechanically robust this prototypical crystal hair-like sensor opens prospects for a new class of sensing devices ranging from wearable electronics to aeronautics.

Relating Excited States to the Dynamics of Macroscopic Strain in Photoresponsive Crystals.

Exposure of a photoreactive single crystal to light with a wavelength offset from its absorption maximum can have two distinct effects. The first is the "direct" effect, wherein the excited state generated in individual chemical species is influenced. The second is the "indirect" effect, which describes the penetration of light into the crystal and hence the spatial propagation and completeness of transformation. We illustrate using the nitro-nitrito isomerization of [Co(NH3)5NO2]Cl(NO3) as an example that the direct and indirect effects can be independently determined. This is achieved by comparing the dynamics of macroscopic crystal deformation (bending curvature and crystal elongation) induced by the photochemical reaction when irradiating a crystal at the absorption maximum and at different band edges (above or below the maximum) of the same band. Quantitative description of the macroscopic strain dynamics in comparison with experiments allowed us to suggest that irradiation at different tails of the same absorption band causes isomerization to proceed via different excited states and an additional photochemical reaction (presumably, reverse nitrito-nitro isomerization) can occur on irradiation at the ligand-field band edges.

Quantifying Mechanical Properties of Molecular Crystals: A Critical Overview of Experimental Elastic Tensors.

This review presents a critical and comprehensive overview of current experimental measurements of complete elastic constant tensors for molecular crystals. For a large fraction of these molecular crystals, detailed comparisons are made with elastic tensors obtained using the corrected small basis set Hartree-Fock method S-HF-3c, and these are shown to be competitive with many of those obtained from more sophisticated density functional theory plus dispersion (DFT-D) approaches. These detailed comparisons between S-HF-3c, experimental and DFT-D computed tensors make use of a novel rotation-invariant spherical harmonic description of the Young's modulus, and identify outliers among sets of independent experimental results. The result is a curated database of experimental elastic tensors for molecular crystals, which we hope will stimulate more extensive use of elastic tensor information-experimental and computational-in studies aimed at correlating mechanical properties of molecular crystals with their underlying crystal structure.

Hybrid Elastic Organic Crystals that Respond to Aerial Humidity.

Reshaping of elongated organic crystals that can be used as semiconductors, waveguides or soft robotic grippers by application of force or light is now a commonplace, however mechanical response of organic crystals to changes in humidity has not been accomplished yet. Here, we report a universal approach to instigating a humidity response into elastically bendable organic crystals that elicits controllable deformation with linear response to aerial humidity while retaining their physical integrity entirely intact. Hygroresponsive bilayer elements are designed by mechanically coupling a humidity-responsive polymer with elastic molecular crystals that have been mechanically reinforced by a polymer coating. As an illustration of the application of these cladded crystalline actuators, they are tested as active optical transducers of visible light where the position of light output can be precisely controlled by variations in aerial humidity. Within a broader context, the approach described here provides access to a vast range of mechanically robust, lightweight hybrid hygroresponsive crystalline materials.

A Low-Temperature-Resistant Flexible Organic Crystal with Circularly Polarized Luminescence.

Flexible organic crystals with unique mechanical properties and excellent optical properties are of paramount significance for their wide applications in various research fields such as adaptive optics and soft robotics. However, low-temperature-resistant flexible organic crystal with circularly polarized luminescence (CPL) has never been reported. Herein, chiral organic crystals with CPL activity and low-temperature flexibility (77 K) are fabricated by the solvent diffusion method from chiral Schiff base, S(R)-4-bromo-2-(((1-phenylethyl)imino)methyl)phenol (S(R)-BPEMP). The corresponding chirooptical properties for the two enantiomeric crystals were thoroughly investigated, including the measurements of circular dichroism (CD) and CPL. To the best of our knowledge, this is the first report on low-molecular-weight flexible organic crystals with CPL activity, and we believe that the results will give a new impetus to the research of organic crystals.

Global Analysis of the Mechanical Properties of Organic Crystals.

Organic crystals, although widely studied, have not been considered nascent candidate materials in engineering design. Here we summarize the mechanical properties of organic crystals that have been reported over the past three decades, and we establish a global mechanical property profile that can be used to predict and identify mechanically robust organic crystals. Being composed of light elements, organic crystals populate a narrow region in the mechanical property-density space between soft, disordered organic materials and stiff, ordered materials. Two subsets of extraordinarily stiff and hard organic crystalline materials were identified and rationalized by the normalized number density, strength, and directionality of their intermolecular interactions. We conclude that future lightweight, soft, all-organic components in devices should capitalize on the greatest asset of organic single crystals-namely, the combination of long-range structural order and softness.

Multifunctional Deformable Organic Semiconductor Single Crystals.

We report the first organic semiconductor crystal with a unique combination of properties that can be used as a multifunctional optoelectronic device. Mechanically flexible single crystals of 9,10-bis(phenylethynyl)anthracene (BPEA) can function as a phototransistor, photoswitch, and an optical waveguide. The material can exist as two structurally different solid phases, with single crystals of one of the phases being elastic at room temperature while those of the other are brittle and become plastic at higher temperature. The output and transfer characteristics of the devices were characterized by measuring the generation and temporal response of the switching of the photogenerated current. The current-voltage characteristics of both phases exhibit linearity and symmetry about the positive and negative voltages. The crystals transmit light in the telecommunications range with significantly low optical loss for an organic crystalline material.