Cemented liner exchange with bone grafting halts the progression of periacetabular osteolysis.

The aims of this were to examine the effect of acetabular liner exchange and intra-operative bone grafting surgery on peri-prosthetic osteolysis. Seven patients with well-fixed Harris-Galante-1 acetabular components received cemented exchange liners for worn liners associated with pre-operatively CT-quantified osteolysis. During surgery, accessible osteolytic lesions were debrided and bone-grafted. Except for one patient with recurrent dislocation and acetabular component revision, the other patients had CT scans at a median of 4 months and at approximately 4 years after surgery. None of the pre-operative lesions increased in volume during the post-operative reporting period and no new lesions were detected. These results show that cemented liner exchange surgery can halt the progression of osteolysis and that bone grafting has the potential to restore bone.

Periprosthetic osteolysis after total hip replacement: molecular pathology and clinical management.

Periprosthetic osteolysis is a serious complication of total hip replacement (THR) in the medium to long term. Although often asymptomatic, osteolysis can lead to prosthesis loosening and periprosthetic fracture. These complications cause significant morbidity and require complex revision surgery. Here, we review advances in our understanding of the cell and tissue response to particles produced by wear of the articular and non-articular surfaces of prostheses. We discuss the molecular and cellular regulators of osteoclast formation and bone resorptive activity, a better understanding of which may lead to pharmacological treatments for periprosthetic osteolysis. We describe the development of imaging techniques for the detection and measurement of osteolysis around THR prostheses, which enable improved clinical management of patients, provide a means of evaluating outcomes of non-surgical treatments for periprosthetic osteolysis, and assist in pre-operative planning for revision surgery. Finally, there have been advances in the materials used for bearing surfaces to minimise wear, and we review the literature regarding the performance of these new materials to date.

Imaging periprosthetic osteolysis around total knee arthroplasties using a human cadaver model.

We examined the sensitivity and accuracy of measuring osteolysis around total knee arthroplasty (TKA) on radiographs, computed tomography (CT), and magnetic resonance imaging (MRI) in a cadaver model. Fifty-four simulated osteolytic defects ranging from 0.7 to 14 cm(3) were created in 6 cadaver knees implanted with either a cemented or an uncemented TKA. Three blinded investigators assessed the presence, location, and volume of defects on radiographs and CT and MRI scans with metal reduction protocols. Both CT and MRI had significantly higher sensitivities and specificities than did plain radiographs (P < .005). Overall, there was no difference in the accuracy of defect volume measurements between CT and MRI (P = .574). This study demonstrates the limitations of radiographs and the high sensitivity and specificity of both CT and MRI in assessing osteolysis around TKA.

Distribution of periacetabular osteolytic lesions varies according to component design.

Using computed tomography, the volume, location, and number of osteolytic lesions were determined adjacent to 38 Harris-Galante 1 (HG-1) acetabular components fixed with screws and 19 porous-coated anatomic (PCA) acetabular components press-fitted without screws. The median implantation times were 16 and 15 years, respectively. The mean total lesion volumes were similar: 11.1 cm(3) (range, 0.7-49 cm(3)) and 9.8 cm(3) (range, 0.4-52 cm(3)), respectively, for hips with HG-1 and PCA components (P = .32). There was a significant difference in the proportion of rim-related, screw or screw hole-related, and combined lesions between the 2 component designs (P < .0001). HG-1 components had more screw and screw hole-related lesions, and PCA components had more rim-related lesions. Although there are concerns regarding screw and screw hole-associated osteolysis, these findings suggest that peripheral fixation may be well maintained in the long term with the use of multiple-hole acetabular components with screw fixation.

Progression of acetabular periprosthetic osteolytic lesions measured with computed tomography.

BACKGROUND: A better understanding of the factors associated with the size and/or progression of osteolytic lesions has been hampered by a lack of sensitivity of radiographic measurement techniques. METHODS: We retrospectively analyzed quantitative computed tomography scans that had been made with use of a high-resolution multi-slice scanner with a metal artifact-suppression protocol. The scans had been made to determine the volume of osteolytic lesions around thirty-five cementless Harris-Galante acetabular components that had been in situ for at least ten years. Repeat scans of thirty hips allowed for the measurement of progression in the size of osteolytic lesions over a one-year period. Associations between the volume of osteolytic lesions, progression in the size of the lesions, polyethylene wear since the time of implantation, change in component position, and patient-related variables (age, gender, body mass index, activity level, walking limitations, joint pain, and function) were determined. RESULTS: In sixteen of the thirty hips that had repeat computed tomography scans, the lesions progressed in size during the study period. The median size of the lesions in these sixteen hips was 10.3 cm(3) at the time of the initial scan, compared with 13.3 cm(3) at a median of fifteen months later (p = 0.001). Osteolytic lesions measuring >10 cm(3) in volume on the initial scan were 2.5 times (95% confidence interval 1.3 to 4.8 times) more likely to progress in size over one year than smaller lesions were. Patients with greater polyethylene wear rates, higher activity levels, no walking limitations, and larger prosthetic femoral head dimensions (26 or 28 mm) had significantly larger osteolytic lesions (p < 0.0001, p = 0.009, p = 0.006, and p = 0.028, respectively). Progression in the size of the osteolytic lesions over one year was significantly associated with larger initial osteolytic lesions (p = 0.002), greater polyethylene wear rates (p = 0.009), and larger (26 or 28-mm) prosthetic femoral head dimensions (p = 0.019). CONCLUSIONS: There is considerable variation in the rates of progression of the size of osteolytic lesions around stable acetabular components. Lesion size and the progression of lesion size are generally related to polyethylene wear rates, higher patient activity levels, and larger-diameter femoral heads. Osteolytic lesions measuring >10 cm(3) in volume are associated with a high rate of progression.

The correlation of RANK, RANKL and TNFalpha expression with bone loss volume and polyethylene wear debris around hip implants.

This study investigates receptor activator NF-kappaB (RANK), RANK ligand (RANKL) and tumour necrosis factor (TNFalpha), key factors regulating bone turnover, present in the tissues near peri-prosthetic osteolysis. Tissue was obtained from zones of peri-prosthetic osteolysis from 11 patients undergoing revision of total hip prostheses, analysed preoperatively by high-resolution spiral multislice CT using a metal artefact suppression protocol. Synovial tissue from 10 patients with osteoarthritis undergoing primary hip replacement was used as control tissue. Immunohistochemical analysis of formalin fixed tissue sections demonstrated that RANK, RANKL and TNFalpha were strongly expressed by large multinucleated cells containing polyethylene wear debris in revision tissues. Control tissue stained weakly for RANK, RANKL and TNFalpha. A strong statistical correlation (p<0.02) was found between the five parameters, volume of bone loss, polyethylene wear debris, RANK, RANKL and TNFalpha expression. Importantly, in vitro studies revealed that RANKL and TNFalpha synergise to increase the volume of bone resorbed, by more than seven fold, when compared to the effect of either cytokine treatment alone. This suggests that the interaction of TNFalpha and RANKL promotes osteoclast activity associated with polyethylene wear and therapies targeting TNF activity may be useful to treat peri-implant osteolysis.

Progression of periacetabular osteolytic lesions.

BACKGROUND: The development of three-dimensional computed tomography (CT) imaging techniques has enabled the detection, accurate measurement, and monitoring of periprosthetic osteolytic lesions. The aim of this study was to track the progression in size of osteolytic lesions and to determine those factors that are associated with the risk of progression. A secondary aim was to investigate whether progression in size of osteolytic lesions could be monitored with use of radiographs. METHODS: We retrospectively determined, with use of sequential CT scans, the progression of periacetabular osteolysis over a period of as much as nine years in a cohort of twenty-six patients (thirty acetabular components) in whom the cementless acetabular component or components had been in place for longer than ten years at the time of the initial CT scan. High-resolution CT scans with metal-artifact suppression were used to determine the volume of osteolytic lesions. Progression in the size of osteolytic lesions per year was calculated as the change in the volume of osteolytic lesions between serial CT scans. Associations were determined between the progression in size of osteolytic lesions, osteolysis rate at the initial CT, patient age, sex, walking limitations, and activity level. Progression in size of osteolytic lesions as determined with use of CT was compared with that determined with use of radiographs. RESULTS: Mean progression in the size of osteolytic lesions, as determined with use of CT, was 1.5 cm(3)/yr (range, 0 to 7.5 cm(3)/yr). The amount of osteolysis at the initial CT scan and patient activity were good predictors of osteolytic lesion progression. The strongest predictor of osteolytic lesion progression occurred when these two risk factors were combined (p = 0.0019). The value of radiographs was limited to monitoring of larger lesions identified by CT. CONCLUSIONS: This is the first study to report on the progression of osteolysis adjacent to cementless acetabular components from medium to long-term follow-up. The data suggest that the osteolysis rate at the initial CT and patient activity can be useful factors in predicting the progression in size of periacetabular osteolytic lesions.

Cement-within-cement stem exchange using the collarless polished double-taper stem.

The clinical and radiographic outcomes of the cement-within-cement femoral stem exchange technique at revision hip arthroplasty were determined. Twenty-three revisions with a collarless polished double-taper stem design were prospectively monitored at up to 12 years. The most common indications for revision were recurrent dislocation and acetabular revision. Radiographic stem subsidence was measured by the Ein Bild Röentgen Analyse method. There was no stem re-revision and no radiographic loosening. Stem within cement subsidence, an intentional design feature of this stem, averaged 0.8 mm (range, 0-2 mm). The average subsidence was similar to that in primary hip arthroplasty. The excellent long-term results of cemented collarless polished taper stems for primary and revision hip arthroplasty can be extended even further by cement-within-cement exchange, which preserves the femur.