RESUMEN
In the last few years, infrared reflection-absorption spectroscopy (IRRAS) has become a standard technique to study vibrational excitations of molecules. These investigations are strongly motivated by potential applications in monitoring chemical processes. For a better understanding of the adsorption mechanism of molecules on dielectrics, the polarization-dependence of an interaction of infrared light with adsorbates on dielectric surfaces is commonly used. Thus, the peak positions in absorption spectra could be different for s- and p-polarized light. This shift between the peak positions depends on both the molecule itself and the dielectric substrate. While the origin of this shift is well understood for infinite two-dimensional adsorbate layers, finite-size samples, which consist of 2D islands of a small number of molecules, have never been considered. Here, we present a study on polarization-dependent finite-size effects in the optical response of such islands on dielectric substrates. The study uses a multi-scale modeling approach that connects quantum chemistry calculations with Maxwell scattering simulations. We distinguish the optical response of a single molecule, a finite number of molecules, and a two-dimensional adsorbate layer. We analyze CO and CO2 molecules deposited on CeO2 and Al2O3 substrates. The evolution of the shift between the polarization-dependent absorbance peaks is first studied for a single molecule, which does not exhibit any shifting at all, and for finite molecular islands, where it increases with increasing island size, as well as for an infinite two-dimensional adsorbate layer. In the latter case, the agreement between the obtained results and the experimental IRRAS data and more traditional three/four-layer model theoretical studies supports the predictive power of the multi-scale approach.
RESUMEN
The surface structure and chemical properties of Y-stabilized zirconia (YSZ) have been subjects of intense debate over the past three decades. However, a thorough understanding of chemical processes occurring at YSZ powders faces significant challenges due to the absence of reliable reference data acquired for well-controlled model systems. Here, we present results from polarization-resolved infrared reflection absorption spectroscopy (IRRAS) obtained for differently oriented, Y-doped ZrO2 single-crystal surfaces after exposure to CO and D2O. The IRRAS data reveal that the polar YSZ(100) surface undergoes reconstruction, characterized by an unusual, red-shifted CO band at 2132â cm-1. Density functional theory calculations allowed to relate this unexpected observation to under-coordinated Zr4+ cations in the vicinity of doping-induced O vacancies. This reconstruction leads to a strongly increased chemical reactivity and water spontaneously dissociates on YSZ(100). The latter, which is an important requirement for catalysing the water-gas-shift (WGS) reaction, is absent for YSZ(111), where only associative adsorption was observed. Together with a novel analysis Scheme these reference data allowed for an operando characterisation of YSZ powders using DRIFTS (diffuse reflectance infrared Fourier transform spectroscopy). These findings facilitate rational design and tuning of YSZ-based powder materials for catalytic applications, in particular CO oxidation and the WGS reaction.
RESUMEN
Studies on reactions in solutions are often hampered by solvent effects. In addition, detailed investigation on kinetics is limited to the small temperature regime where the solvent is liquid. Here, we report the in situ spectroscopic observation of UV-induced photochemical reactions of aryl azides within a crystalline matrix in vacuum. The matrices are formed by attaching the reactive moieties to ditopic linkers, which are then assembled to yield metal-organic frameworks (MOFs) and surface-mounted MOFs (SURMOFs). These porous, crystalline frameworks are then used as model systems to study azide-related chemical processes under ultrahigh vacuum (UHV) conditions, where solvent effects can be safely excluded and in a large temperature regime. Infrared reflection absorption spectroscopy (IRRAS) allowed us to monitor the photoreaction of azide in SURMOFs precisely. The in situ IRRAS data, in conjunction with XRD, MS, and XPS, reveal that illumination with UV light first leads to forming a nitrene intermediate. In the second step, an intramolecular rearrangement occurs, yielding an indoloindole derivative. These findings unveil a novel pathway for precisely studying azide-related chemical transformations. Reference experiments carried out for solvent-loaded SURMOFs reveal a huge diversity of other reaction schemes, thus highlighting the need for model systems studied under UHV conditions.
RESUMEN
This corrects the article DOI: 10.1103/PhysRevLett.125.256101.
RESUMEN
The diffusion of hydrogen adsorbed inside layered MoS2 crystals has been studied by means of quasi-elastic neutron scattering, neutron spin-echo spectroscopy, nuclear reaction analysis, and X-ray photoelectron spectroscopy. The neutron time-of-flight and neutron spin-echo measurements demonstrate fast diffusion of hydrogen molecules parallel to the basal planes of the two dimensional crystal planes. At room temperature and above, this intra-layer diffusion is of a similar speed to the surface diffusion that has been observed in earlier studies for hydrogen atoms on Pt surfaces. A significantly slower hydrogen diffusion was observed perpendicular to the basal planes using nuclear reaction analysis.
RESUMEN
Detailed information on structural, chemical, and physical properties of natural cleaved (10.4) calcite surfaces was obtained by a combined atomic force microscopy (AFM) and infrared (IR) study using CO as a probe molecule under ultrahigh vacuum (UHV) conditions. The structural quality of the surfaces was determined using non-contact AFM (NC-AFM), which also allowed assigning the adsorption site of CO molecules. Vibrational frequencies of adsorbed CO species were determined by polarization-resolved infrared reflection absorption spectroscopy (IRRAS). At low exposures, adsorption of CO on the freshly cleaved (10.4) calcite surface at a temperature of 62 K led to the occurrence of a single C-O vibrational band located at 2175.8 cm-1, blue-shifted with respect to the gas phase value. For larger exposures, a slight, coverage-induced redshift was observed, leading to a frequency of 2173.4 cm-1 for a full monolayer. The width of the vibrational bands is extremely small, providing strong evidence that the cleaved calcite surface is well-defined with only one CO adsorption site. A quantitative analysis of the IRRA spectra recorded at different surface temperatures revealed a CO binding energy of -0.31 eV. NC-AFM data acquired at 5 K for sub-monolayer CO coverage reveal single molecules imaged as depressions at the position of the protruding surface features, in agreement with the IRRAS results. Since there are no previous experimental data of this type, the interpretation of the results was aided by employing density functional theory calculations to determine adsorption geometries, binding energies, and vibrational frequencies of carbon monoxide on the (10.4) calcite surface. It was found that the preferred geometry of CO on this surface is adsorption on top of calcium in a slightly tilted orientation. With increased coverage, the binding energy shows a small decrease, revealing the presence of repulsive adsorbate-adsorbate interactions.
RESUMEN
In ceria-based catalysis, the shape of the catalyst particle, which determines the exposed crystal facets, profoundly affects its reactivity. The vibrational frequency of adsorbed carbon monoxide (CO) can be used as a sensitive probe to identify the exposed surface facets, provided reference data on well-defined single crystal surfaces together with a definitive theoretical assignment exist. We investigate the adsorption of CO on the CeO_{2}(110) and (111) surfaces and show that the commonly applied DFT(PBE)+U method does not provide reliable CO vibrational frequencies by comparing with state-of-the-art infrared spectroscopy experiments for monocrystalline CeO_{2} surfaces. Good agreement requires the hybrid DFT approach with the HSE06 functional. The failure of conventional density-functional theory (DFT) is explained in terms of its inability to accurately describe the facet- and configuration-specific donation and backdonation effects that control the changes in the CâO bond length upon CO adsorption and the CO force constant. Our findings thus provide a theoretical basis for the detailed interpretation of experiments and open up the path to characterize more complex scenarios, including oxygen vacancies and metal adatoms.
RESUMEN
The growth of ZnO clusters supported by ZnO-bilayers on Ag(111) and the interaction of these oxide nanostructures with water have been studied by a multi-technique approach combining temperature-dependent infrared reflection absorption spectroscopy (IRRAS), grazing-emission X-ray photoelectron spectroscopy, and density functional theory calculations. Our results reveal that the ZnO bilayers exhibiting graphite-like structure are chemically inactive for water dissociation, whereas small ZnO clusters formed on top of these well-defined, yet chemically passive supports show extremely high reactivity - water is dissociated without an apparent activation barrier. Systematic isotopic substitution experiments using H2 16 O/D2 16 O/D2 18 O allow identification of various types of acidic hydroxyl groups. We demonstrate that a reliable characterization of these OH-species is possible via co-adsorption of CO, which leads to a red shift of the OD frequency due to the weak interaction via hydrogen bonding. The theoretical results provide atomic-level insight into the surface structure and chemical activity of the supported ZnO clusters and allow identification of the presence of under-coordinated Zn and O atoms at the edges and corners of the ZnO clusters as the active sites for H2 O dissociation.
RESUMEN
Biorepulsivity of oligo(ethylene glycol) (OEG) substituted self-assembled monolayers (SAMs), serving as model systems for analogous polymeric surfaces, is generally ascribed to the hydration effect. In this context, we applied temperature-programmed desorption to study interaction of water (D2O) with a series of OH-terminated, OEG-substituted alkanethiolate SAMs with variable length of the OEG strand, defining their biorepulsion behavior. Along with the ice overlayer (wetting phase), growing also on the surface of the analogous non-substituted films, a hydration phase, corresponding to the adsorption of D2O into the OEG matrix, was observed, with a higher desorption energy (12.4 kcal mol-1vs. 10.4 kcal mol-1) and a weight correlating with the length of the OEG strand and, consequently, with biorepulsivity. The formation of hydration phase was found to occur over an activation barrier, presumably by temperature-promoted diffusion from the wetting phase, with this process being additionally enforced by a pre-desorption annealing.
RESUMEN
In contrast to catalytically active metal single atoms deposited on oxide nanoparticles, the crystalline nature of metal-organic frameworks (MOFs) allows for a thorough characterization of reaction mechanisms. Using defect-free HKUST-1 MOF thin films, we demonstrate that Cu+ /Cu2+ dimer defects, created in a controlled fashion by reducing the pristine Cu2+ /Cu2+ pairs of the intact framework, account for the high catalytic activity in low-temperature CO oxidation. Combining advanced IR spectroscopy and density functional theory we propose a new reaction mechanism where the key intermediate is an uncharged O2 species, weakly bound to Cu+ /Cu2+ . Our results reveal a complex interplay between electronic and steric effects at defect sites in MOFs and provide important guidelines for tailoring and exploiting the catalytic activity of single metal atom sites.
RESUMEN
Strontium, calcium, and magnesium silicate hydrate phases are synthesized by the reaction between silica and solution of metal hydroxides. The kinetics of the reaction is recorded using a quartz crystal microbalance (QCM), continuously monitoring the change in frequency and dissipation energy. Based on QCM results, it is shown that properties of solutions like the pH-value or the type of ions play a pivotal function on the rate-determining stage of the reaction, the thickness of the diffuse layer, the formation of carbonates, as well as the kinetics of the formed phases. Further properties of the reaction products are investigated using X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and infrared spectroscopy (IR). With the help of thermogravimetric analysis (TGA) and temperature-dependent X-ray diffraction (XRD), we investigate how our synthesized phases can be turned into MSiO3 structures. Finally, the Goldschmidt rules for perovskites structures show that this might be an attractive way for new and nontoxic phases in the future.
RESUMEN
The surface chemistry of water on zinc oxides is an important topic in catalysis and photocatalysis. Interaction of D2 O with anisotropic ZnO(10 1 â¾ 0) surfaces was studied by IR reflection absorption spectroscopy using s- and p-polarized light incident along different directions. Interpretation of the experimental data is aided using isotopologues and DFT calculations. The presence of numerous species is revealed: intact monomers, a mixed 2D D2 O/OD adlayer, an anisotropic bilayer, and H-bonded 3D structures. The isolated water monomers are identified unambiguously at low temperatures. The thermally induced diffusion of water monomers occurs at elevated temperatures, forming dimers that undergo autocatalytic dissociation via proton transfer. Polarization- and azimuth-resolved IR data provide information on the orientation and strength of H-bonds within the 2D and 3D structures. Abâ initio molecular dynamics simulations reveal strong anharmonic couplings within the H-bond network.
RESUMEN
The adsorption of CO2 on the surface of a CeO2 (110) bulk single crystal was studied by X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. The high-quality XPS and C K-edge NEXAFS data show that CO2 adsorbs as a carbonate species on both fully oxidized CeO2 (110) and partially reduced CeO2-x (110). No evidence for the formation of a carboxylate (CO2δ- ) intermediate could be found. On the fully oxidized CeO2 (110) substrate, the carbonate decomposes upon heating to above 400â K, leading to the desorption of CO2 . The NEXAFS data reveal the presence of a minor amount of formate (or carboxylate) and bicarbonate species, which are related to reactions of CO2 with surface hydroxyl groups. In the case of reduced CeO2-x (110), the carbonate species completely disappear upon heating to temperatures above 500â K. In contrast to conclusions presented in earlier works, the oxidation state of the surface is unchanged, that is, CO2 does not re-oxidize the reduced CeO2-x (110) surface.
RESUMEN
The surface atomic arrangement of metal oxides determines their physical and chemical properties, and the ability to control and optimize structural parameters is of crucial importance for many applications, in particular in heterogeneous catalysis and photocatalysis. Whereas the structures of macroscopic single crystals can be determined with established methods, for nanoparticles (NPs), this is a challenging task. Herein, we describe the use of CO as a probe molecule to determine the structure of the surfaces exposed by rod-shaped ceria NPs. After calibrating the CO stretching frequencies using results obtained for different ceria single-crystal surfaces, we found that the rod-shaped NPs actually restructure and expose {111} nanofacets. This finding has important consequences for understanding the controversial surface chemistry of these catalytically highly active ceria NPs and paves the way for the predictive, rational design of catalytic materials at the nanoscale.
RESUMEN
An atomic-level understanding of dioxygen activation on metal oxides remains one of the major challenges in heterogeneous catalysis. By performing a thorough surface-science study of all three low-index single-crystal surfaces of ceria, probably the most important redox catalysts, we provide a direct spectroscopic characterization of reactive dioxygen species at defect sites on the reduced ceria (110) and (100) surfaces. Surprisingly, neither of these superoxo and peroxo species was found on ceria (111), the thermodynamically most stable surface of this oxide. Applying density functional theory, we could relate these apparently inconsistent findings to a sub-surface diffusion of Oâ vacancies on (111) substrates, but not on the less-closely packed surfaces. These observations resolve a long standing debate concerning the location of Oâ vacancies on ceria surfaces and the activation of O2 on ceria powders.
RESUMEN
The photoreactivity of ceria, a photochemically inert oxide with a large band gap, can be increased to competitive values by introducing defects. This previously unexplained phenomenon has been investigated by monitoring the UV-induced decomposition of N2 O on well-defined single crystals of ceria by using infrared reflection-absorption spectroscopy (IRRAS). The IRRAS data, in conjunction with theory, provide direct evidence that reducing the ceria(110) surface yields high photoreactivity. No such effects are seen on the (111) surface. The low-temperature photodecomposition of N2 O occurs at surface Oâ vacancies on the (110) surface, where the electron-rich cerium cations with a significantly lowered coordination number cause a local lowering of the huge band gap (ca.â 6â eV). The quantum efficiency of strongly reduced ceria(110) surfaces in the photodecomposition of N2 O amounts to 0.03 %, and is thus comparable to that reported for the photooxidation of CO on rutile TiO2 (110).
RESUMEN
We have conducted a combined experimental and theoretical study on the optimization of hexa-peri-hexabenzocoronene (HBC) as organic semiconductor. While orientations with high electronic coupling are unfavorable in the native liquid crystalline phase of HBC, we enforced such orientations by applying external constraints. To this end, self-assembled monolayers (SAMs) were formed by a non-conventional preparation method on an Au-substrate using electrochemical control. Within these SAMs the HBC units are forced into favorable orientations that cannot be achieved by unconstrained crystallization. For simulating the charge transport we applied a recently developed approach, where the molecular structure and the charge carrier are propagated simultaneously during a molecular dynamics simulation. Experiments as well as simulations are mutually supportive of an improved mobility in these novel materials. The implication of these findings for a rational design of future organic semiconductors will be discussed.
RESUMEN
The adsorption of carbon dioxide on the mixed-terminated ZnO(101[combining macron]0) surface of a bulk single crystal was studied by UHV Infrared Reflection Absorption Spectroscopy (IRRAS). In contrast to metals, the classic surface selection rule for IRRAS does not apply to bulk oxide crystals, and hence vibrational bands can also be observed for s-polarized light. Although this fact substantially complicates data interpretation, a careful analysis allows for a direct determination of the adsorbate geometry. Here, we demonstrate the huge potential of IR-spectroscopy for investigations on oxide single crystal surfaces by considering all three components of the incident polarized light separately. We find that the tridentate (surface) carbonate is aligned along the [0001] direction. A comparison to data reported previously for CO2 adsorbed on the surfaces of ZnO nanoparticles provides important insight into the role of defects in the surface chemistry of powder particles.
Asunto(s)
Dióxido de Carbono/química , Óxido de Zinc/química , Adsorción , Espectrofotometría Infrarroja , Propiedades de SuperficieRESUMEN
The chemical activity of oxygen vacancies on well-defined, single-crystal CeO2(111)-surfaces is investigated using CO as a probe molecule. Since no previous measurements are available, the assignment of the CO ν1 stretch frequency as determined by IR-spectroscopy for the stoichiometric and defective surfaces are aided by ab initio electronic structure calculations using density functional theory (DFT).
RESUMEN
Mono- and multilayers of the molecular photoswitch azobenzene were adsorbed on two layered transition-metal dichalcogenides, semiconducting HfS2 and metallic TiTe2, at temperatures of 80-120 K and investigated in situ using valence-band and core-level photoelectron spectroscopy as well as near-edge X-ray absorption fine structure spectroscopy. The spectroscopic results indicate similar growth modes on the two substrates. In the monolayer systems, the azobenzene molecules tend to lie flat on the surface with average tilt angles of <15°, whereas the multilayer systems show a larger average tilt angle of 35-45°, depending on substrate surface conditions. The chemical environment of azobenzene, as investigated by XPS, does not change significantly from mono- to multilayers suggesting weak adsorbate-substrate coupling for the molecular layer that forms the interface with the substrate. Irradiation with ultraviolet light with a wavelength of 365 nm leads to a partial rearrangement of the adsorbed azobenzene molecules with a trans-to-cis conversion of up to 35%.