Organic-Inorganic Hybrid Glasses of Atomically Precise Nanoclusters.

Organic-inorganic atomically precise nanoclusters provide indispensable building blocks for establishing structure-property links in hybrid condensed matter. However, robust glasses of ligand-protected nanocluster solids have yet to be demonstrated. Herein, we show [Cu4I4(PR3)4] cubane nanoclusters coordinated by phosphine ligands (PR3) form robust melt-quenched glasses in air with reversible crystal-liquid-glass transitions. Protective phosphine ligands critically influence the glass formation mechanism, modulating the glasses' physical properties. A hybrid glass utilizing ethyldiphenylphosphine-based nanoclusters, [Cu4I4(PPh2Et)4], exhibits superb optical properties, including >90% transmission in both visible and near-infrared wavelengths, negligible self-absorption, near-unity quantum yield, and high light yield. Experimental and theoretical analyses demonstrate the structural integrity of the [Cu4I4(PPh2Et)4] nanocluster, i.e., iodine-bridged tetranuclear cubane, has been fully preserved in the glass state. The strong internanocluster CH-π interactions found in the [Cu4I4(PPh2Et)4] glass and subsequently reduced structural vibration account for its enhanced luminescence properties. Moreover, this highly transparent glass enables performant X-ray imaging and low-loss waveguiding in fibers drawn above the glass transition. The discovery of "nanocluster glass" opens avenues for unraveling glass formation mechanisms and designing novel luminescent glasses of well-defined building blocks for advanced photonics.

Planar Core and Macrocyclic Shell Stabilized Atomically Precise Copper Nanocluster Catalyst for Efficient Hydroboration of C-C Multiple Bond.

Atomically precise metal nanoclusters (NCs) have become an important class of catalysts due to their catalytic activity, high surface area, and tailored active sites. However, the design and development of bond-forming reaction catalysts based on copper NCs are still in their early stages. Herein, we report the synthesis of an atomically precise copper nanocluster with a planar core and unique shell, [Cu45(TBBT)29(TPP)4(C4H11N)2H14]2+ (Cu45) (TBBT: 4-tert-butylbenzenethiol; TPP: triphenylphosphine), in high yield via a one-pot reduction method. The resulting structurally well-defined Cu45 is a highly efficient catalyst for the hydroboration reaction of alkynes and alkenes. Mechanistic studies show that a single-electron oxidation of the in situ-formed ate complex enables the hydroboration via the formation of boryl-centered radicals under mild conditions. This work demonstrates the promise of tailored copper nanoclusters as catalysts for C-B heteroatom bond-forming reactions. The catalysts are compatible with a wide range of alkynes and alkenes and functional groups for producing hydroborated products.

One-Pot Colloidal Synthesis Enables Highly Tunable InSb Short-Wave Infrared Quantum Dots Exhibiting Carrier Multiplication.

Colloidal quantum dots (CQDs) are emerging materials for short-wave infrared (SWIR, ≈1100-3000 nm) photodetectors, which are technologically important for a broad array of applications. Unfortunately, the most developed SWIR CQD systems are Pb and Hg chalcogenides; their toxicity and regulated compositions limit their applications. InSb CQD system is a potential environmentally friendly alternative, whose bandgap in theory, is tunable via quantum confinement across the SWIR spectrum. However, InSb CQDs are difficult to exploit, due to their complex syntheses and uncommon reactive precursors, which greatly hinder their application and study. Here, a one-pot synthesis strategy is reported using commercially available precursors to synthesize-under standard colloidal synthesis conditions-high-quality, size-tunable InSb CQDs. With this strategy, the large Bohr exciton radius of InSb can be exploited for tuning the bandgap of the CQDs over a wide range of wavelengths (≈1250-1860 nm) across the SWIR region. Furthermore, by changing the surface ligands of the CQDs from oleic acid (OA) to 1-dodecanthiol (DDT), a ≈20-fold lengthening in the excited-state lifetime, efficient carrier multiplication, and slower carrier annihilation are observed. The work opens a wide range of SWIR applications to a promising class of Pb- and Hg-free CQDs.

Isostructural Nanocluster Manipulation Reveals Pivotal Role of One Surface Atom in Click Chemistry.

Elucidating single-atom effects on the fundamental properties of nanoparticles is challenging because single-atom modifications are typically accompanied by appreciable changes to the overall particle's structure. Herein, we report the synthesis of a [Cu58 H20 PET36 (PPh3 )4 ]2+ (Cu58 ; PET: phenylethanethiolate; PPh3 : triphenylphosphine) nanocluster-an atomically precise nanoparticle-that can be transformed into the surface-defective analog [Cu57 H20 PET36 (PPh3 )4 ]+ (Cu57 ). Both nanoclusters are virtually identical, with five concentric metal shells, save for one missing surface copper atom in Cu57 . Remarkably, the loss of this single surface atom drastically alters the reactivity of the nanocluster. In contrast to Cu58 , Cu57 shows promising activity for click chemistry, particularly photoinduced [3+2] azide-alkyne cycloaddition (AAC), which is attributed to the active catalytic site in Cu57 after the removal of one surface copper atom. Our study not only presents a unique system for uncovering the effect of a single-surface atom modification on nanoparticle properties but also showcases single-atom surface modification as a powerful means for designing nanoparticle catalysts.

Atomically Precise Defective Copper Nanocluster Catalysts for Highly Selective C-C Cross-Coupling Reactions.

Point defects in nanoparticles have long been hypothesized to play an important role in governing the particle's electronic structure and physicochemical properties. However, single point defects in material systems usually exist with other heterogeneities, obscuring the chemical role of the effects. Herein, we report the synthesis of novel atomically precise, copper hydride nanoclusters (NCs), [Cu28 H10 (C7 H7 S)18 (TPP)3 ] (Cu28 ; TPP: triphenylphosphine; C7 H7 S: o-thiocresol) with a defined defect in the gram scale via a one-pot reduction method. The Cu28 acts as a highly selective catalyst for C-C cross-couplings. The work highlights the potential of defective NCs as model systems for investigating individual defects, correlating defects with physiochemical properties, and rationally designing new nanoparticle catalysts.

Lecithin Capping Ligands Enable Ultrastable Perovskite-Phase CsPbI3 Quantum Dots for Rec. 2020 Bright-Red Light-Emitting Diodes.

Bright-red light-emitting diodes (LEDs) with a narrow emission line width that emit between 620 and 635 nm are needed to meet the latest industry color standard for wide color gamut displays, Rec. 2020. CsPbI3 perovskite quantum dots (QDs) are one of the few known materials that are ideally suited to meet these criteria. Unfortunately, CsPbI3 perovskite QDs are prone to transform into a non-red-emitting phase and are subject to further degradation mechanisms when their luminescence wavelength is tuned to match that of the Rec. 2020 standard. Here, we show that zwitterionic lecithin ligands can stabilize the perovskite phase of CsPbI3 QDs for long periods in air for at least 6 months compared to a few days for control samples. LEDs fabricated with our ultrastable lecithin-capped CsPbI3 QDs exhibit an external quantum efficiency (EQE) of 7.1% for electroluminescence centered at 634 nm─a record for all-inorganic perovskite nanocrystals in Rec. 2020 red. Our devices achieve a maximum luminance of 1391 cd/m2 at 7.5 V, and their operational half-life is 33 min (T50) at 200 cd/m2─a 10-fold enhancement compared to control samples. Density functional theory results suggest that the surface strain in CsPbI3 QDs capped with the conventional ligands, oleic acid and oleylamine, contributes to the instability of the perovskite structural phase. On the other hand, lecithin binding induces virtually no surface strain and shows a stronger binding tendency for the CsPbI3 surface. Our study highlights the tremendous potential of zwitterionic ligands in stabilizing the perovskite phase and particle size of CsPbI3 QDs for various optoelectronic applications.

[Cu36H10(PET)24(PPh3)6Cl2] Reveals Surface Vacancy Defects in Ligand-Stabilized Metal Nanoclusters.

Precise identification and in-depth understanding of defects in nanomaterials can aid in rationally modulating defect-induced functionalities. However, few studies have explored vacancy defects in ligand-stabilized metal nanoclusters with well-defined structures, owing to the substantial challenge of synthesizing and isolating such defective metal nanoclusters. Herein, a novel defective copper hydride nanocluster, [Cu36H10(PET)24(PPh3)6Cl2] (Cu36; PET: phenylethanethiolate; PPh3: triphenylphosphine), is successfully synthesized at the gram scale via a simple one-pot reduction method. Structural analysis reveals that Cu36 is a distorted half cubic nanocluster, evolved from the perfect Nichol's half cube. The two surface copper vacancies in Cu36 are found to be the principal imperfections, which result in some structural adjustments, including copper atom reconstruction near the vacancies as well as ligand modifications (e.g., substitution, migration, and exfoliation). Density functional theory calculations imply that the above-mentioned defects have a considerable influence on the electronic structure and properties. The modeling suggests that the formation of defective Cu36 rather than the perfect half cube is driven by the enlargement of the energy gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital of the nanocluster. The structural evolution induced by the surface copper atom vacancies provides atomically precise insights into the defect-induced readjustment of the local structure and introduces new avenues for understanding the chemistry of defects in nanomaterials.

[Cu15 (PPh3 )6 (PET)13 ]2+ : a Copper Nanocluster with Crystallization Enhanced Photoluminescence.

Due to their atomically precise structure, photoluminescent copper nanoclusters (Cu NCs) have emerged as promising materials in both fundamental studies and technological applications, such as bio-imaging, cell labeling, phototherapy, and photo-activated catalysis. In this work, a facile strategy is reported for the synthesis of a novel Cu NCs coprotected by thiolate and phosphine ligands, formulated as [Cu15 (PPh3 )6 (PET)13 ]2+ , which exhibits bright emission in the near-infrared (NIR) region (≈720 nm) and crystallization-induced emission enhancement (CIEE) phenomenon. Single crystal X-ray crystallography shows that the NC possesses an extraordinary distorted trigonal antiprismatic Cu6 core and a, unique among metal clusters, "tri-blade fan"-like structure. An in-depth structural investigation of the ligand shell combined with density functional theory calculations reveal that the extended CH···π and π-π intermolecular ligand interactions significantly restrict the intramolecular rotations and vibrations and, thus, are a major reason for the CIEE phenomena. This study provides a strategy for the controllable synthesis of structurally defined Cu NCs with NIR luminescence, which enables essential insights into the origins of their optical properties.

[Ag9(1,2-BDT)6]3-: How Square-Pyramidal Building Blocks Self-Assemble into the Smallest Silver Nanocluster.

The emerging promise of few-atom metal catalysts has driven the need for developing metal nanoclusters (NCs) with ultrasmall core size. However, the preparation of metal NCs with single-digit metallic atoms and atomic precision is a major challenge for materials chemists, particularly for Ag, where the structure of such NCs remains unknown. In this study, we developed a shape-controlled synthesis strategy based on an isomeric dithiol ligand to yield the smallest crystallized Ag NC to date: [Ag9(1,2-BDT)6]3- (1,2-BDT = 1,2-benzenedithiolate). The NC's crystal structure reveals the self-assembly of two Ag square pyramids through preferential pyramidal vertex sharing of a single metallic Ag atom, while all other Ag atoms are incorporated in a motif with thiolate ligands, resulting in an elongated body-centered Ag9 skeleton. Steric hindrance and arrangement of the dithiolated ligands on the surface favor the formation of an anisotropic shape. Time-dependent density functional theory based calculations reproduce the experimental optical absorption features and identify the molecular orbitals responsible for the electronic transitions. Our findings will open new avenues for the design of novel single-digit metal NCs with directional self-assembled building blocks.

[Cu81(PhS)46(tBuNH2)10(H)32]3+ Reveals the Coexistence of Large Planar Cores and Hemispherical Shells in High-Nuclearity Copper Nanoclusters.

Copper-based nanomaterials have attracted tremendous interest due to their unique properties in the fields of photoluminescence and catalysis. As a result, studies on the correlation between their molecular structure and their properties are of great importance. Copper nanoclusters are a new class of nanomaterials that can provide an atomic-level view of the crystal structure of copper nanoparticles. Herein, a high-nuclearity copper nanocluster with 81 copper atoms, formulated as [Cu81(PhS)46(tBuNH2)10(H)32]3+ (Cu81), was successfully synthesized and fully studied by X-ray crystallography, X-ray photoelectron spectroscopy, hydrogen evolution experiments, electrospray ionization mass spectrometry, nuclear magnetic resonance spectroscopy, and density functional theory calculations. Cu81 exhibits extraordinary structural characteristics, including (i) three types of novel epitaxial surface-protecting motifs; (ii) an unusual planar Cu17 core; (iii) a hemispherical shell, comprised of a curved surface layer and a planar surface layer; and (iv) two distinct, self-organized arrangements of protective ligands on the curved and planar surfaces. The present study sheds light on structurally unexplored copper nanomaterials and paves the way for the synthesis of high-nuclearity copper nanoclusters.

InAs Nanorod Colloidal Quantum Dots with Tunable Bandgaps Deep into the Short-Wave Infrared.

InAs colloidal quantum dots (CQDs) have emerged as candidate lead- and mercury-free solution-processed semiconductors for infrared technology due to their appropriate bulk bandgap, which can be tuned by quantum confinement, and promising charge-carrier transport properties. However, the lack of suitable arsenic precursors and readily accessible synthesis conditions have limited InAs CQDs to smaller sizes (<7 nm), with bandgaps largely restricted to <1400 nm in the near-infrared spectral window. Conventional InAs CQD synthesis requires highly reactive, hazardous arsenic precursors, which are commercially scarce, making the synthesis hard to control and study. Here, we present a controlled synthesis strategy (using only readily available and less reactive precursors) to overcome the practical wavelength limitation of InAs CQDs, achieving monodisperse InAs nanorod CQDs with bandgaps tunable from ∼1200 to ∼1800 nm, thus crossing deep into the short-wave infrared (SWIR) region. By controlling the reactivity through in situ precursor complexation, we isolate the reaction mechanism, producing InAs nanorod CQDs that display narrow excitonic features and efficient carrier multiplication. Our work enables InAs CQDs for a wider range of SWIR applications.

Single-Crystal Perovskite Solar Cells Exhibit Close to Half A Millimeter Electron-Diffusion Length.

Single-crystal halide perovskites exhibit photogenerated-carriers of high mobility and long lifetime, making them excellent candidates for applications demanding thick semiconductors, such as ionizing radiation detectors, nuclear batteries, and concentrated photovoltaics. However, charge collection depreciates with increasing thickness; therefore, tens to hundreds of volts of external bias is required to extract charges from a thick perovskite layer, leading to a considerable amount of dark current and fast degradation of perovskite absorbers. However, extending the carrier-diffusion length can mitigate many of the anticipated issues preventing the practical utilization of perovskites in the abovementioned applications. Here, single-crystal perovskite solar cells that are up to 400 times thicker than state-of-the-art perovskite polycrystalline films are fabricated, yet retain high charge-collection efficiency in the absence of an external bias. Cells with thicknesses of 110, 214, and 290 µm display power conversion efficiencies (PCEs) of 20.0, 18.4, and 14.7%, respectively. The remarkable persistence of high PCEs, despite the increase in thickness, is a result of a long electron-diffusion length in those cells, which was estimated, from the thickness-dependent short-circuit current, to be ≈0.45 mm under 1 sun illumination. These results pave the way for adapting perovskite devices to optoelectronic applications in which a thick active layer is essential.

The Structural and Mechanical Properties of the UHMWPE Films Mixed with the PE-Wax.

Since obtaining a highly oriented structure based on a large-scale commercial ultra-high molecular weight polyethylene (UHMWPE) is considered very difficult due to its high molecular weight and melting index, modifying the structure of these cheap commercial UHMWPE brands into a supra-molecular structure with fiber-forming properties by adding a small amount of polyethylene wax (PE-wax) will provide the possibility to obtain highly oriented UHMWPE products with enhanced mechanical and tribological properties. In this work, highly oriented UHMWPE/PE-wax films were prepared. The PE-wax affected the UHMWPE as an intermolecular lubricant. The obtained lamellar structure of the UHMWPE/PE-wax composites had a better processability. The UHMWPE and UHMWPE/PE-wax structures for the xerogels and the films were studied by using differential scanning calorimetry and scanning electron microscopy. The PE-wax presence enhanced the mechanical properties of the UHMWPE/PE-wax films to a high degree. The highest average value of the tensile strength was 1320 MPa (an increase of 78%) obtained by adding a PE-wax content of 1.0 wt.%, and the highest average value of the Young's modulus was 56.8 GPa (an increase of 71%) obtained by adding a PE-wax content of 2.0 wt.%. The addition of the PE-wax increased the work of fracture values of the UHMWPE/PE-wax films up to 233%. The formation of the cavities was observed in the virgin UHMWPE films more than in the UHMWPE/PE-wax films, and the whitening of the oriented films was related to the crystallization process more than to the cavitation phenomenon. The coefficient of friction of the oriented UHMWPE/PE-wax films improved by 33% in comparison with the isotropic UHMWPE, and by 7% in comparison with the oriented virgin UHMWPE films.