RESUMEN
Microtubules are composed of α-tubulin and ß-tubulin dimers positioned head-to-tail to form protofilaments that associate laterally in varying numbers. It is not known how cellular microtubules assemble with the canonical 13-protofilament architecture, resulting in micrometer-scale α/ß-tubulin tracks for intracellular transport that align with, rather than spiral along, the long axis of the filament. We report that the human ~2.3 MDa γ-tubulin ring complex (γ-TuRC), an essential regulator of microtubule formation that contains 14 γ-tubulins, selectively nucleates 13-protofilament microtubules. Cryogenic electron microscopy reconstructions of γ-TuRC-capped microtubule minus ends reveal the extensive intra-domain and inter-domain motions of γ-TuRC subunits that accommodate luminal bridge components and establish lateral and longitudinal interactions between γ-tubulins and α-tubulins. Our structures suggest that γ-TuRC, an inefficient nucleation template owing to its splayed conformation, can transform into a compacted cap at the microtubule minus end and set the lattice architecture of cellular microtubules.
Asunto(s)
Microscopía por Crioelectrón , Microtúbulos , Modelos Moleculares , Tubulina (Proteína) , Microtúbulos/metabolismo , Microtúbulos/química , Microtúbulos/ultraestructura , Tubulina (Proteína)/química , Tubulina (Proteína)/metabolismo , Tubulina (Proteína)/ultraestructura , Humanos , Conformación Proteica , Proteínas Asociadas a Microtúbulos/química , Proteínas Asociadas a Microtúbulos/metabolismo , Proteínas Asociadas a Microtúbulos/ultraestructuraRESUMEN
Escherichia coli NADPH-dependent assimilatory sulfite reductase is responsible for fixing sulfur for incorporation into sulfur-containing biomolecules. The oxidoreductase is composed of two subunits, an NADPH, FMN, and FAD-binding diflavin reductase and an iron siroheme and Fe4S4-containing oxidase. How they interact has been an unknown for over 50 years because the complex is highly flexible, thus has been intransigent for traditional X-ray or cryo-EM structural analysis. Using a combination of the chameleon plunging system with a fluorinated lipid we overcame the challenge of preserving the minimal dimer between the subunits for high-resolution cryo-EM analysis. Here, we report the first structure of the complex between the reductase and oxidase, revealing how they interact in a minimal interface. Further, we determined the structural elements that discriminate between the pairing of a siroheme-containing oxidase with a diflavin reductase or a ferredoxin partner to channel the six electrons that reduce sulfite to sulfide.
RESUMEN
Microtubules are composed of α/ß-tubulin dimers positioned head-to-tail to form protofilaments that associate laterally in varying numbers. It is not known how cellular microtubules assemble with the canonical 13-protofilament architecture, resulting in micrometer-scale α/ß-tubulin tracks for intracellular transport that align with, rather than spiral along, the filament's long-axis. We report that the human â¼2.3MDa γ-tubulin ring complex (γ-TuRC), an essential regulator of microtubule formation that contains 14 γ-tubulins, selectively nucleates 13-protofilament microtubules. Cryo-EM reconstructions of γ-TuRC-capped microtubule minus-ends reveal the extensive intra- and inter-domain motions of γ-TuRC subunits that accommodate its actin-containing luminal bridge and establish lateral and longitudinal interactions between γ- and α-tubulins. Our structures reveal how free γ-TuRC, an inefficient nucleation template due to its splayed conformation, transforms into a stable cap that blocks addition or loss of α/ß-tubulins from minus-ends and sets the lattice architecture of cellular microtubules. One Sentence Summary: Structural insights into how the γ-tubulin ring complex nucleates and caps a 13-protofilament microtubule.
RESUMEN
Ice thickness is a critical parameter in single particle cryo-EM - too thin ice can break during imaging or exclude the sample of interest, while ice that is too thick contributes to more inelastic scattering that precludes obtaining high resolution reconstructions. Here we present the practical effects of ice thickness on resolution, and the influence of energy filters, accelerating voltage, or detector mode. We collected apoferritin data with a wide range of ice thicknesses on three microscopes with different instrumentation and settings. We show that on a 300 kV microscope, using a 20 eV energy filter slit has a greater effect on improving resolution in thicker ice; that operating at 300 kV instead of 200 kV accelerating voltage provides significant resolution improvements at an ice thickness above 150 nm; and that on a 200 kV microscope using a detector operating in super resolution mode enables good reconstructions for up to 200 nm ice thickness, while collecting in counting instead of linear mode leads to improvements in resolution for ice of 50-150 nm thickness. Our findings can serve as a guide for users seeking to optimize data collection or sample preparation routines for both single particle and in situ cryo-EM. We note that most in situ data collection is done on samples in a range of ice thickness above 150 nm so these results may be especially relevant to that community.
RESUMEN
Bacteria and archaea acquire resistance to viruses and plasmids by integrating fragments of foreign DNA into the first repeat of a CRISPR array. However, the mechanism of site-specific integration remains poorly understood. Here, we determine a 560-kDa integration complex structure that explains how Pseudomonas aeruginosa Cas (Cas1-Cas2/3) and non-Cas proteins (for example, integration host factor) fold 150 base pairs of host DNA into a U-shaped bend and a loop that protrude from Cas1-2/3 at right angles. The U-shaped bend traps foreign DNA on one face of the Cas1-2/3 integrase, while the loop places the first CRISPR repeat in the Cas1 active site. Both Cas3 proteins rotate 100 degrees to expose DNA-binding sites on either side of the Cas2 homodimer, which each bind an inverted repeat motif in the leader. Leader sequence motifs direct Cas1-2/3-mediated integration to diverse repeat sequences that have a 5'-GT. Collectively, this work reveals new DNA-binding surfaces on Cas2 that are critical for DNA folding and site-specific delivery of foreign DNA.
Asunto(s)
Proteínas Asociadas a CRISPR , Repeticiones Palindrómicas Cortas Agrupadas y Regularmente Espaciadas , Repeticiones Palindrómicas Cortas Agrupadas y Regularmente Espaciadas/genética , Proteínas Asociadas a CRISPR/metabolismo , ADN/química , Sitios de Unión , Plásmidos , Sistemas CRISPR-Cas/genéticaRESUMEN
Single-particle cryo-electron microscopy (cryoEM) is a swiftly growing method for understanding protein structure. With increasing demand for high-throughput, high-resolution cryoEM services comes greater demand for rapid and automated cryoEM grid and sample screening. During screening, optimal grids and sample conditions are identified for subsequent high-resolution data collection. Screening is a major bottleneck for new cryoEM projects because grids must be optimized for several factors, including grid type, grid hole size, sample concentration, buffer conditions, ice thickness and particle behavior. Even for mature projects, multiple grids are commonly screened to select a subset for high-resolution data collection. Here, machine learning and novel purpose-built image-processing and microscope-handling algorithms are incorporated into the automated data-collection software Leginon, to provide an open-source solution for fully automated high-throughput grid screening. This new version, broadly called Smart Leginon, emulates the actions of an operator in identifying areas on the grid to explore as potentially useful for data collection. Smart Leginon Autoscreen sequentially loads and examines grids from an automated specimen-exchange system to provide completely unattended grid screening across a set of grids. Comparisons between a multi-grid autoscreen session and conventional manual screening by 5 expert microscope operators are presented. On average, Autoscreen reduces operator time from â¼6â h to <10â min and provides a percentage of suitable images for evaluation comparable to the best operator. The ability of Smart Leginon to target holes that are particularly difficult to identify is analyzed. Finally, the utility of Smart Leginon is illustrated with three real-world multi-grid user screening/collection sessions, demonstrating the efficiency and flexibility of the software package. The fully automated functionality of Smart Leginon significantly reduces the burden on operator screening time, improves the throughput of screening and recovers idle microscope time, thereby improving availability of cryoEM services.
Asunto(s)
Procesamiento de Imagen Asistido por Computador , Programas Informáticos , Microscopía por Crioelectrón/métodos , Procesamiento de Imagen Asistido por Computador/métodos , Algoritmos , ElectronesRESUMEN
The electron cryo-microscopy (cryo-EM) approach of 2D electron crystallography allows for structure determination of two-dimensional (2D) crystals of soluble and membrane proteins, employing identical principles and methods once 2D crystals are obtained. Two-dimensional crystallization trials of membrane proteins can result in multiple outcomes of ordered arrays, which may be suited for either 2D electron crystallography, helical analysis, or MicroED.The membrane protein 2D crystals used for 2D electron crystallography are either single- or double-layered ordered proteoliposome vesicles or sheet-like membranes. We have developed a cryo-EM grid preparation approach, which allows for the analysis of stacked 2D crystals that are neither suitable for MicroED nor for directly applying 2D electron crystallography. This new grid preparation approach, the peel-blot, uses the capillary force generated by submicron filter paper and mechanical means for the separation of stacked 2D crystals into single-layered 2D crystals, for which standard 2D electron crystallography can then be employed. The preparation of 2D crystals, the peel-blot grid preparation, and the structure determination by 2D electron crystallography are described here.
Asunto(s)
Microscopía por Crioelectrón/métodos , Cristalografía/métodos , Proteínas de la Membrana/química , Modelos Moleculares , Conformación ProteicaRESUMEN
Reconstitution of detergent-solubilized membrane proteins into phospholipid bilayers allows for functional and structural studies under close-to-native conditions that greatly support protein stability and function. Here we outline the detailed steps for membrane protein reconstitution to result in proteoliposomes and nanodiscs. Reconstitution can be achieved via a number of different strategies. The protocols for preparation of proteoliposomes use detergent removal via dialysis or via nonpolar polystyrene beads, or a mixture of the two methods. In this chapter, the protocols for nanodiscs apply polystyrene beads only. Proteoliposome preparation methods allow for substantial control of the lipid-to-protein ratio, from minimal amounts of phospholipid to high concentrations, type of phospholipid, and mixtures of phospholipids. In addition, dialysis affords a fairly large degree of control and variation of parameters such as rate of reconstitution, temperature, buffer conditions, and proteoliposome size. For the nanodisc approach, which is highly advantageous for ensuring equal access to both membrane sides of the protein as well as fast reconstitution of only a single membrane protein into a well-defined bilayer environment in each nanodisc, the protocols outline how a number of these parameters are more restricted in comparison to the proteoliposome protocols.