Modified Carboxyl-Terminated PAMAM Dendrimers as Great Cytocompatible Nano-Based Drug Delivery System.

Polyamidoamine (PAMAM) dendrimers are extensively researched as potential drug delivery system thanks to their desirable features such as controlled and stable structures, and ease of functionalization onto their surface active groups. However, there have been concerns about the toxicity of full generation dendrimers and risks of premature clearance from circulation, along with other physical drawbacks presented in previous formulations, including large particle sizes and low drug loading efficiency. In our study, carboxyl-terminated PAMAM dendrimer G3.5 was grafted with poly (ethylene glycol) methyl ether (mPEG) to be employed as a nano-based drug delivery system with great cytocompatibility for the delivery of carboplatin (CPT), a widely prescribed anticancer drug with strong side effects so that the drug will be effectively entrapped and not exhibit uncontrolled outflow from the open structure of unmodified PAMAM G3.5. The particles formed were spherical in shape and had the optimal size range (around 36 nm) that accommodates high drug entrapment efficiency. Surface charge was also determined to be almost neutral and the system was cytocompatible. In vitro release patterns over 24 h showed a prolonged CPT release compared to free drug, which correlated to the cytotoxicity assay on malignant cell lines showing the lack of anticancer effect of CPT/mPEG-G3.5 compared with CPT.

Fatty Acid, Lipid Classes and Phospholipid Molecular Species Composition of the Marine Clam Meretrix lyrata (Sowerby 1851) from Cua Lo Beach, Nghe An Province, Vietnam.

This study aims to analyze compositions of fatty acids and phospholipid molecular species in the hard clams Meretrix lyrata (Sowerby, 1851) harvested from Cua Lo beach, Nghe An province, Viet Nam. Total lipid of hard clams Meretrix lyrata occupied 1.7 ± 0.2% of wet weight and contained six classes: hydrocarbon and wax (HW), triacylglycerol (TAG), free fatty acids (FFA), sterol (ST), polar lipid (PoL), and monoalkyl diacylglycerol (MADAG). Among the constituents, the proportion of PoL accounted was highest, at 45.7%. In contrast, the figures for MADAG were lowest, at 1.3%. Twenty-six fatty acids were identified with the ratios of USAFA/SAFA was 2. The percentage of n-3 PUFA (ω-3) and n-6 PUFA (ω-6) was high, occupying 38.4% of total FA. Among PUFAs, arachidonic acid (AA, 20:4n-6), eicosapentaenoic acid (EPA, 20:5n-3), docosapentaenoic acid (DPA, 22:5n-3), and docosahexaenoic acid (DHA, 22:6n-3) accounted for 3.8%, 7.8%, 2.2% and 12.0% of total lipid of the clam respectively. Phospholipid molecular species were identified in polar lipids of the clams consisting six types: phosphatidylethalnolamine (PE, with 28 molecular species), phosphatidylcholine (PC, with 26 molecular species), phosphatidylserine (PS, with 18 molecular species), phosphatidylinositol (PI, with 10 molecular species), phosphatidylglycerol (PG, with only one molecular species), and ceramide aminoethylphosphonate (CAEP, with 15 molecular species). This is the first time that the molecular species of sphingophospholipid were determined, in Meretrix lyrata in particular, and for clams in general. Phospholipid formula species of PE and PS were revealed to comprise two kinds: Alkenyl acyl glycerophosphoethanolamine and Alkenyl acyl glycerophosphoserine occupy 80.3% and 81.0% of total PE and PS species, respectively. In contrast, the percentage of diacyl glycero phosphatidylcholine was twice as high as that of PakCho in total PC, at 69.3, in comparison with 30.7%. In addition, phospholipid formula species of PI and PG comprised only diacyl glycoro phospholipids. PE 36:1 (p18:0/18:1), PC 38:6 (16:0/22:6), PS 38:1 (p18:0/20:1), PI 40:5 (20:1/20:4), PG 32:0 (16:0/16:0) and CAEP 34:2 (16:2/d18:0) were the major molecular species.

Modified compact fluorescent lamps improve light-induced off-season floral stimulation in dragon fruit farming.

Efficient light-induced floral stimulation plays a key role in energy conservation and maintaining stable productivity during off-season periods of dragon fruit plants. In this study, we first reported on results of a survey on dragon fruit farmers regarding use of lamps in performing artificially induced flowering process in Vietnam. It was found that the use of incandescent lamp was prevalent in dragon fruit cultivation practices, resulting in heavy electricity consumption, and that low-power compact fluorescent light (CFL) bulbs were not extensively utilized, possibly due to low floral induction performance of domestic CFL bulbs. Arguing that emission spectra of currently used lamps were not consistent with adsorption spectra of phytochromes, whose transformation is responsible for flowering process of dragon fruit, we then proposed three improved CFL lamps (power capacity of 20 W) having emission spectra focused on red and far-red regions. New lamp prototypes were tested in 7 field experiments in three different provinces in Vietnam. One improved CFL bulb (treatment 2) performed relatively well in comparison with the incandescent control lamp (60 W) in six out of seven experiments with regard to some growth indicators (e.g., number of floral stems, number of bubs, number of fruits per plant) and fruit yield. Recent success on commercialization of the improved CFL lamp demonstrates the potential of CFL lamps in floral stimulating irradiation of other crops and plants and in alleviating electricity burden in dragon fruit growing areas.

Effects of microwave blanching conditions on the quality of green asparagus (Asparagus officinalis L.) butt segment.

Blanching is a pretreatment method that is often applied in fruit and vegetable processing to inhibit enzyme activity and reduce loss of food quality. It was recently discovered that well-controlled microwave volumetric heating could improve the blanching efficiency and retain nutritional and sensorial values of product. This study was conducted to investigate effects of microwave blanching conditions on the quality of green asparagus (Asparagus officinalis L.) butt segments, a rich source of fiber and antioxidants but are often discarded during processing. The experiments were designed by one-factor-at-a-time method with two varying factors including blanching time (2, 4, 6, and 8 min) and microwave power output (150, 300, 450, and 600 W). Quality of product was evaluated by sensory, retention of phenolics, and free-radical scavenging activity retention. The results showed that longer blanching time or higher microwave power was associated with reduced quality of green asparagus butt segment. Besides, the appropriate parameters for microwave blanching of the green asparagus butt segment was found at 300 W for 4 min.

Chemical Synthesis and Characterization of Poly(poly(ethylene glycol) methacrylate)-Grafted CdTe Nanocrystals via RAFT Polymerization for Covalent Immobilization of Adenosine.

This paper describes the functionalization of poly(poly(ethylene glycol) methacrylate) (PPEGMA)-grafted CdTe (PPEGMA-g-CdTe) quantum dots (QDs) via surface-initiated reversible addition⁻fragmentation chain transfer (SI-RAFT) polymerization for immobilization of adenosine. Initially, the hydroxyl-coated CdTe QDs, synthesized using 2-mercaptoethanol (ME) as a capping agent, were coupled with a RAFT agent, S-benzyl S'-trimethoxysilylpropyltrithiocarbonate (BTPT), through a condensation reaction. Then, 2,2'-azobisisobutyronitrile (AIBN) was used to successfully initiate in situ RAFT polymerization to generate PPEGMA-g-CdTe nanocomposites. Adenosine-above-PPEGMA-grafted CdTe (Ado-i-PPEGMA-g-CdTe) hybrids were formed by the polymer shell, which had successfully undergone bioconjugation and postfunctionalization by adenosine (as a nucleoside). Fourier transform infrared (FT-IR) spectrophotometry, energy-dispersive X-ray (EDX) spectroscopy, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy results indicated that a robust covalent bond was created between the organic PPEGMA part, cadmium telluride (CdTe) QDs, and the adenosine conjugate. The optical properties of the PPEGMA-g-CdTe and Ado-i-PPEGMA-g-CdTe hybrids were investigated by photoluminescence (PL) spectroscopy, and the results suggest that they have a great potential for application as optimal materials in biomedicine.

Evaluation of Factors Affecting Antimicrobial Activity of Bacteriocin from Lactobacillus plantarum Microencapsulated in Alginate-Gelatin Capsules and Its Application on Pork Meat as a Bio-Preservative.

Antimicrobial compounds from traditional fermented foods have shown activity against a wide range of pathogen and spoilage microorganisms for several years. In this study, a Lactic acid bacteria (LAB), isolated from Vietnamese traditional fermented yogurt (Lactobacillus plantarum SC01), was encapsulated in alginate-gelatin (ALG-GEL) and the effect of incubation temperature, medium pH and surfactants were assessed. The aims of this research were to evaluate antimicrobial activity of bacteriocin produced by L. plantarum SC01. Another aim the research was to study the quality of pork meat treated with its Bacteriocin in 2 h as a bio-preservative at different storage times (0 h, 12 h, 24 h and 48 h) in room temperature, compared to control (treated with salt 40.0%). The antimicrobial activity of L. plantarum SC01 was identified through the inhibition rate of five indicator organisms, including Escherichia coli, Salmonella sp., Staphylococcus aureus, Listeria monocytogenes, and Bacillus subtilis by co-culture method. The results showed that L. plantarum SC01 microencapsulated in ALG-GEL (2.5% alginate and 6.0% gelatin, w/v) and 3.0% bacteria supplied into modified MRS medium (MRSOPTSC01) produced highly active compound inhibited the growth of indicator organisms at a density of 104⁻108 CFU/mL. Antibacterial compounds were highly active in a treatment at 80 °C; not to be affected by pH; affected by surfactant as Ethylenediaminetetraacetic acid (EDTA), Sodium dodecyl sulfate (SDS), and Tween. Moreover, LAB obtained from this study show the potent Bacteriocin in its usage as a preservative in food.

Functional Magnetic Core-Shell System-Based Iron Oxide Nanoparticle Coated with Biocompatible Copolymer for Anticancer Drug Delivery.

Polymer coating has drawn increasing attention as a leading strategy to overcome the drawbacks of superparamagnetic iron oxide nanoparticles (SPIONs) in targeted delivery of anticancer drugs. In this study, SPIONs were modified with heparin-Poloxamer (HP) shell to form a SPION@HP core-shell system for anticancer drug delivery. The obtained formulation was characterized by techniques including transmission electron microscopy (TEM), Fourier transform infrared spectra (FT-IR), vibration sample magnetometer (VSM), proton nuclear magnetic resonance (¹H-NMR), and powder X-ray diffraction (XRD). Results showed the successful attachment of HP shell on the surface of SPION core and the inability to cause considerable effects to the crystal structure and unique magnetic nature of SPION. The core-shell system maintains the morphological features of SPIONs and the desired size range. Notably, Doxorubicin (DOX), an anticancer drug, was effectively entrapped into the polymeric shell of SPION@HP, showing a loading efficiency of 66.9 ± 2.7% and controlled release up to 120 h without any initial burst effect. Additionally, MTT assay revealed that DOX-loaded SPION@HP exerted great anticancer effect against HeLa cells and could be safely used. These results pave the way for the application of SPION@HP as an effective targeted delivery system for cancer treatment.

Investigation of Chitosan Nanoparticles Loaded with Protocatechuic Acid (PCA) for the Resistance of Pyricularia oryzae Fungus against Rice Blast.

In this study, chitosan nanoparticles were used as a carrier for Protocatechuic acid (PCA) to resist Pyricularia oryzae against rice blast. The final compound was characterized using zeta potentials for its surface electricity, Fourier transform infrared (FT-IR) analysis and transmission electron microscopy (TEM) were conducted for functional groups and for particle sizes and shape, respectively. The zeta potential results showed that loading PCA causes chitosan nanoparticle (CSNP) to decrease in surface electrons. The TEM images revealed that the particle size of chitosan (CS), although increasing in size when carrying PCA molecules, showed sufficient size for reasonable penetration into fungal cells. The FT-IR analysis showed that all functional group in CSNP carried PCA matched with previous studies. The antifungal test showed that diameters of inhibition zone of CS increases significantly after loading PCA, exhibiting the strongest antimicrobial effect on the Pyricularia oryzae fungus compared with weaker effects exhibited by CSNP alone or PCA. Our results suggested that CSNP loaded with PCA could be a potential compound for eradication of Pyricularia oryzae and that further testing on in vitro rice plants is recommended to reaffirm this possibility.

The Chemical Compatibility and Adhesion of Energetic Materials with Several Polymers and Binders: An Experimental Study.

The chemical compatibility and the adhesion of energetic materials and additive materials exert a strong influence on the sensitivity, safety and performance of a polymer-bonded explosive (PBX). In this study, the chemical compatibility of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), pentaerythritol tetranitrate (PETN) with several polymers were evaluated using the vacuum stability test (VST) and the differential scanning calorimetry (DSC); while the adhesion between RDX or PETN and each binder based on these polymers was determined through interfacial characteristics using contact angle measurement. The experimental results demonstrate that RDX and PETN are compatible with polystyrene (PS), nitrocellulose (NC) and fluoroelastomer (FKM) according to the STANAG 4147. Therefore the two polymers can be used as adhesives in PBX composition. Moreover, based on interfacial characteristics such as interfacial tension and work of adhesion, the adhesion between RDX and each binder was predicted to be better than that of PETN.