Approaching the quantum limit in two-dimensional semiconductor contacts.

The development of next-generation electronics requires scaling of channel material thickness down to the two-dimensional limit while maintaining ultralow contact resistance1,2. Transition-metal dichalcogenides can sustain transistor scaling to the end of roadmap, but despite a myriad of efforts, the device performance remains contact-limited3-12. In particular, the contact resistance has not surpassed that of covalently bonded metal-semiconductor junctions owing to the intrinsic van der Waals gap, and the best contact technologies are facing stability issues3,7. Here we push the electrical contact of monolayer molybdenum disulfide close to the quantum limit by hybridization of energy bands with semi-metallic antimony ([Formula: see text]) through strong van der Waals interactions. The contacts exhibit a low contact resistance of 42 ohm micrometres and excellent stability at 125 degrees Celsius. Owing to improved contacts, short-channel molybdenum disulfide transistors show current saturation under one-volt drain bias with an on-state current of 1.23 milliamperes per micrometre, an on/off ratio over 108 and an intrinsic delay of 74 femtoseconds. These performances outperformed equivalent silicon complementary metal-oxide-semiconductor technologies and satisfied the 2028 roadmap target. We further fabricate large-area device arrays and demonstrate low variability in contact resistance, threshold voltage, subthreshold swing, on/off ratio, on-state current and transconductance13. The excellent electrical performance, stability and variability make antimony ([Formula: see text]) a promising contact technology for transition-metal-dichalcogenide-based electronics beyond silicon.

Validated enhancement and temperature modulated absorbance of a WS2 monolayer based on a planar structure.

Transition-metal dichalcogenides (TMDCs), as emerging optoelectronic materials, necessitate the establishment of an experimentally viable system to study their interaction with light. In this study, we propose and analyze a WS2/PMMA/Ag planar Fabry-Perot (F-P) cavity, enabling the direct experimental measurement of WS2 absorbance. By optimizing the structure, the absorbance of A exciton of WS2 up to 0.546 can be experimentally achieved, which matches well with the theoretical calculations. Through temperature and thermal expansion strain induced by temperature, the absorbance of the A exciton can be tuned in situ. Furthermore, temperature-dependent photocurrent measurements confirmed the consistent absorbance of the A exciton under varying temperatures. This WS2/PMMA/Ag planar structure provides a straightforward and practical platform for investigating light interaction in TMDCs, laying a solid foundation for future developments of TMDC-based optoelectronic devices.

Broadband mid-infrared photodetectors utilizing two-dimensional van der Waals heterostructures with parallel-stacked pn junctions.

Optimizing the width of depletion region is a key consideration in designing high performance photovoltaic photodetectors, as the electron-hole pairs generated outside the depletion region cannot be effectively separated, leading to a negligible contribution to the overall photocurrent. However, currently reported photovoltaic mid-infrared photodetectors based on two-dimensional heterostructures usually adopt a single pn junction configuration, where the depletion region width is not maximally optimized. Here, we demonstrate the construction of a high performance broadband mid-infrared photodetector based on a MoS2/b-AsP/MoS2npn van der Waals heterostructure. The npn heterojunction can be equivalently represented as two parallel-stacked pn junctions, effectively increasing the thickness of the depletion region. Consequently, the npn device shows a high detectivity of 1.3 × 1010cmHz1/2W-1at the mid-infrared wavelength, which is significantly improved compared with its single pn junction counterpart. Moreover, it exhibits a fast response speed of 12 µs, and a broadband detection capability ranging from visible to mid-infrared wavelengths.

Alloy Engineering Allows On-Demand Design of Ultrasensitive Monolayer Semiconductor SERS Substrates.

The chemical mechanism (CM) of surface-enhanced Raman scattering (SERS) has been recognized as a decent approach to mildly amplify Raman scattering. However, the insufficient charge transfer (CT) between the SERS substrate and molecules always results in unsatisfying Raman enhancement, exerting a substantial restriction for CM-based SERS. In principle, CT is dominated by the coupling between the energy levels of a semiconductor-molecule system and the laser wavelength, whereas precise tuning of the energy levels is intrinsically difficult. Herein, two-dimensional transition-metal dichalcogenide alloys, whose energy levels can be precisely and continuously tuned over a wide range by simply adjusting their compositions, are investigated. The alloys enable on-demand construction of the CT resonance channels to cater to the requirements of a specific target molecule in SERS. The SERS signals are highly reproducible, and a clear view of the SERS dependences on the energy levels is revealed for different CT resonance terms.

Polarization-sensitive narrowband infrared photodetection triggered by optical Tamm state engineering.

Polarization-sensitive narrowband photodetection at near-infrared (NIR) has attracted significant interest in optical communication, environmental monitoring, and intelligent recognition system. However, the current narrowband spectroscopy heavily relies on the extra filter or bulk spectrometer, which deviates from the miniaturization of on-chip integration. Recently, topological phenomena, such as the optical Tamm state (OTS), provided a new solution for developing functional photodetection, and we experimentally realized the device based on 2D material (graphene) for the first time to the best of our knowledge. Here, we demonstrate polarization-sensitive narrowband infrared photodetection in OTS coupled graphene devices, which are designed with the aid of the finite-difference time-domain (FDTD) method. The devices show narrowband response at NIR wavelengths empowered by the tunable Tamm state. The full width at half maximum (FWHM) of the response peak reaches ∼100 nm, and it can potentially be improved to ultra-narrow of about 10 nm by increasing the periods of dielectric distributed Bragg reflector (DBR). The responsivity and response time of the device reaches 187 mA/W and ∼290 µs at 1550 nm, respectively. Furthermore, the prominent anisotropic features and high dichroic ratios of ∼4.6 at 1300 nm and ∼2.5 at 1500 nm are achieved by integrating gold metasurfaces.

Silver nanoparticle-induced enhancement of light extraction in two-dimensional light-emitting diodes.

Monolayer transition metal dichalcogenides (TMDCs) with direct bandgaps are considered promising candidates for building light-emitting diodes (LEDs). One crucial indicator of their performance is the brightness of electroluminescence (EL). In this study, we fabricate WS2-based LEDs that make full use of the assistance of effective transient-mode charge injection. By introducing self-assembled silver nanoparticles (NPs) on top of the LED, the extraction efficiency is significantly improved, with a 2.9-fold EL enhancement observed in the experiment. Full-wave simulations further confirm that the improvement comes from the scattering capability of silver NPs, with results qualitatively fitting the experiment. This approach, with its compatibility with van der Waals heterostructures, can be further promoted to enhance the brightness of 2D monolayer TMDC-based LEDs.

Wogonin alleviates BaP-induced DNA damage and oxidative stress in human airway epithelial cells by dual inhibiting CYP1A1 activity and expression.

Benzo[a]pyrene (BaP) is a common air pollutant that has been reported to cause oxidative stress and carcinogenesis. Wogonin, a flavonoid compound extracted from the roots of Scutellaria baicalensis, has been found to possess a variety of pharmacological activities, including anti-inflammatory and anti-cancer effects. The purpose of this study was to examine the ability of wogonin to alleviate the cytotoxicity induced by BaP in human airway epithelial cells and explore the corresponding mechanism. Our study found that wogonin treatment inhibited DNA damage and reactive oxygen species overproduction induced by BaP in human airway epithelial cells. In vitro enzyme assays showed that wogonin significantly inhibited the enzymatic activity of CYP1A1. In addition, wogonin decreased the basal level of CYP1A1 and inhibited the CYP1A1 overexpression induced by BaP, whereas overexpression of CYP1A1 partially reversed the effect of wogonin on BaP-induced DNA damage. Meanwhile, a CYP1A1 inhibitor and CYP1A1 knockdown also showed these same effects. Further studies showed that wogonin regulates CYP1A1 expression by inhibiting CDK7 and CDK9 activity. The use of CDK7 or CDK9 inhibitors decreased BaP-induced cytotoxicity and CYP1A1 expression. Finally, we found that the methoxy group of wogonin was crucial for its inhibitory activity. In conclusion, our data indicated that wogonin could effectively relieve BaP induced cytotoxicity, and its mechanism was related to the dual inhibition of CYP1A1 activity and expression.

Lithography-free and high-efficiency preparation of black phosphorous devices by direct evaporation through shadow mask.

Two-dimensional (2D) materials including black phosphorus (BP) have been extensively investigated because of their exotic physical properties and potential applications in nanoelectronics and optoelectronics. Fabricating BP based devices is challenging because BP is extremely sensitive to the external environment, especially to the chemical contamination during the lithography process. The direct evaporation through shadow mask technique is a clean method for lithography-free electrode patterning of 2D materials. Herein, we employ the lithography-free evaporation method for the construction of BP based field-effect transistors and photodetectors and systematically compare their performances with those of BP counterparts fabricated by conventional lithography and transfer electrode methods. The results show that BP devices fabricated by direct evaporation method possess higher mobility, faster response time, and smaller hysteresis than those prepared by the latter two methods. This can be attributed to the clean interface between BP and evaporated-electrodes as well as the lower Schottky barrier height of 20.2 meV, which is given by the temperature-dependent electrical results. Furthermore, the BP photodetectors exhibit a broad-spectrum response and polarization sensitivity. Our work elucidates a universal, low-cost and high-efficiency method to fabricate BP devices for optoelectronic applications.

Autocrine TGF-alpha is associated with Benzo(a)pyrene-induced mucus production and MUC5AC expression during allergic asthma.

OBJECTS: Benzo(a)pyrene (BaP), an environmental pollutant, is present in high concentrations in urban smog and cigarette smoke and has been reported to promote high mucin 5AC (MUC5AC) expression. Epithelium-derived inflammatory cytokines are considered an important modulator of mucus oversecretion and MUC5AC overexpression. Here, we investigated whether the effect of BaP on MUC5AC overexpression was associated with cytokine autocrine activity in vivo and in vitro. METHODS: In vivo, BALB/c mice were treated with ovalbumin (OVA) in the presence or absence of BaP. Allergy-induced mucus production was assessed by Alcian Blue Periodic acid Schiff (AB-PAS) staining. The human airway epithelial cell line NCI-H292 was used in vitro. MUC5AC and transforming growth factor (TGF)-α mRNA levels were assessed with real-time quantitative PCR. The concentration of cytokines was measured by ELISA. The MUC5AC, p-ERK, ERK, p-EGFR and EGFR proteins were detected by Western blotting in cells or by immunohistochemistry in mouse lungs. Small-interfering RNAs were used for gene silencing. RESULTS: TGF-α was overproduced in the supernatant of NCI-H292 cells treated with BaP. Knockdown of TGF-α expression inhibited the BaP-induced increase in MUC5AC expression and subsequent activation of the EGFR-ERK signalling pathway. Knocking down aryl hydrocarbon receptor (AhR) expression or treatment with an ROS inhibitor (N-acetyl-L-cysteine) could relieve the TGF-α secretion induced by BaP in epithelial cells. In an animal study, coexposure to BaP with OVA increased mucus production, MUC5AC expression and ROS-EGFR-ERK activation in the lung as well as TGF-α levels in bronchoalveolar lavage fluid (BALF). Furthermore, the concentration of TGF-α in BALF was correlated with MUC5AC mRNA levels. Additionally, TGF-α expression was found to be positively correlated with MUC5AC expression in the airway epithelial cells of smokers. Compared with non-smoker asthma patients, TGF-α serum levels were also elevated in smoker asthma patients. CONCLUSION: Autocrine TGF-α was associated with BaP-induced MUC5AC expression in vitro and in vivo. BaP induced TGF-α secretion by activating AhR and producing ROS, which led to activation of the EGFR-ERK pathway.

Excitonic Dynamics in Janus MoSSe and WSSe Monolayers.

We report here details of steady-state and time-resolved spectroscopy of excitonic dynamics for Janus transition metal dichalcogenide monolayers, including MoSSe and WSSe, which were synthesized by low-energy implantation of Se into transition metal disulfides. Absorbance and photoluminescence spectroscopic measurements determined the room-temperature exciton resonances for MoSSe and WSSe monolayers. Transient absorption measurements revealed that the excitons in Janus structures form faster than those in pristine transition metal dichalcogenides by about 30% due to their enhanced electron-phonon interaction by the built-in dipole moment. By combining steady-state photoluminescence quantum yield and time-resolved transient absorption measurements, we find that the exciton radiative recombination lifetime in Janus structures is significantly longer than in their pristine samples, supporting the predicted spatial separation of the electron and hole wave functions due to the built-in dipole moment. These results provide fundamental insight in the optical properties of Janus transition metal dichalcogenides.

Photoluminescence enhancement at a high generation rate induced by exciton localization.

The photoluminescence (PL) efficiency of two-dimensional (2D) transition metal dichalcogenides (TMDs) is extremely low under high power excitation, limiting its potential in display and light-emission application. This arises from the much shorter lifetime of non-radiative recombination than radiative recombination, wherein photo-carriers tend to decay through non-radiative processes. Herein, a "molecular state" near the valence band is successfully introduced into the ${{\rm MoS}_2}$ monolayer to increase the density of radiative states and speed up the exciton relaxation. This reduces the recombination lifetime of excitons by two orders of magnitude and forms vigorous competition with non-radiative decays. As a consequence, dozens of times enhancement of PL in ${{\rm MoS}_2}$ monolayers under high excitation power (${\rm G}\sim{{10}^{19}}\;{{\rm cm}^{- 2}}\cdot{{\rm S}^{- 1}}$) is realized. These results provide an effective method to improve PL efficiency under high injection levels for applications of 2D materials in light-emission industry.

Defect-related dynamics of photoexcited carriers in 2D transition metal dichalcogenides.

Two-dimensional (2D) transition metal dichalcogenides (TMDs) exhibit enormous potential in the field of optoelectronics. The high performance of TMD materials and optoelectronic devices significantly depends on processes involved in photoelectric conversion, including photo-excitation, relaxation, transportation, and recombination. Remarkably, inevitable defects in materials prolong or shorten the characteristic time of these processes and even bring about new photoelectric conversion channels, namely, the defect-related relaxation pathways of photoexcited carriers tailor the performance of photoelectric applications. In recent years, there have been numerous investigations in exploring the variant transient signals caused by defects in TMDs utilizing ultrafast spectroscopies. They have the capability in providing an accurate and overall representation of ultrafast processes owing to the subtle temporal resolution. The defect-related mechanisms occurring in different time scales (from femtosecond (fs) to microsecond (µs)) play influential roles throughout the relaxation process of photoexcited species. Herein, we review the defect-related relaxation mechanisms of photoexcited species in TMDs according to the time scale utilizing ultrafast spectroscopy techniques. By interpreting and summarizing the defect-related transient signals, we furnish the direction in material design and performance optimization.

Effect of urban air pollution on CRP and coagulation: a study on inpatients with acute exacerbation of chronic obstructive pulmonary disease.

PURPOSE: Acute exacerbation of chronic obstructive pulmonary disease (AECOPD) is an important event in the course of chronic obstructive pulmonary disease that negatively affects patients' quality of life and leads to higher socioeconomic costs. While previous studies have demonstrated a significant association between urban air pollution and hospitalization for AECOPD, there is a lack of research on the impact of particulate matter (PM) on inflammation and coagulation in AECOPD inpatients. Therefore, this study investigated the association of changes in coagulation function and C-reactive protein (CRP) with PM levels in the days preceding hospitalization. PATIENTS AND METHODS: We reviewed the medical records of AECOPD patients admitted to Putuo Hospital, Shanghai University of Traditional Chinese Medicine, between March 2017 and September 2019. We analyzed the association of coagulation function and CRP level in AECOPD patients with PM levels in the days before hospitalization. Multivariate unconditional logistic regression analyses were used to evaluate the adjusted odds ratio (OR) and 95% confidence interval (CI) for the association of CRP data with hospitalization day. Kruskal-Wallis tests were used to evaluate mean aerodynamic diameter of ≥ 2.5 µm (PM2.5) exposure on the day before hospitalization; we assessed its association with changes in prothrombin time (PT) in AECOPD inpatients with different Global Initiative for Chronic Obstructive Lung Disease (GOLD) classes. RESULTS: The peripheral blood PT of AECOPD patients with PM2.5 ≥ 25 mg/L on the day before hospitalization were lower than those of patients with PM2.5 < 25 mg/L (t = 2.052, p = 0.041). Patients with severe GOLD class exposed to greater than 25 mg/L of PM2.5on the day before hospitalization showed significant differences in PT (F = 9.683, p = 0.008). Peripheral blood CRP levels of AECOPD patients exposed to PM2.5 ≥ 25 mg/L and PM10 ≥ 50 mg/L on the day before hospitalization were higher than those of patients exposed to PM2.5 < 25 mg/L and PM10 < 50 mg/L (t = 2.008, p = 0.046; t = 2.637, p = 0.009). Exposure to < 25 mg/L of PM2.5 on the day before hospitalization was significantly associated with CRP levels (adjusted OR 1.91; 95% CI 1.101, 3.315; p = 0.024). CONCLUSION: Exposure of patients with AECOPD to high PM levels on the day before hospitalization was associated with an increased CRP level and shortened PT. Moreover, PM2.5 had a greater effect on CRP level and PT than mean aerodynamic diameter of ≥ 10 µm (PM10). AECOPD patients with severe GOLD class were more sensitive to PM2.5-induced shortening of PT than those with other GOLD classes.

Benzo(a)pyrene induces MUC5AC expression through the AhR/mitochondrial ROS/ERK pathway in airway epithelial cells.

OBJECTIVES: Benzo(a)pyrene (BaP) is a ubiquitous air pollutants, and BaP exposure leads to a risk of respiratory diseases. The oversecretion of airway mucus and high expression of mucin 5AC (MUC5AC) are associated with common respiratory disorders caused by air pollution. We aimed to investigate the effect of BaP on MUC5AC expression, especially the mechanisms by which BaP induces MUC5AC gene expression. METHODS: The human airway epithelial cell NCI-H292 was used to test the effects of BaP on the expression of MUC5AC in vitro. MUC5AC mRNA and protein expression were assessed with real-time quantitative PCR, immunochemistry, and western blotting. A luciferase assay was conducted to detect the activity of the promoter. The total cellular ROS and mitochondrial ROS were measured by corresponding probes. Small-interfering RNAs were used for gene silencing. AhR-overexpressing cell lines were constructed by transfection with AhR overexpression lentivirus. RESULTS: We found that BaP stimulation upregulated the MUC5AC mRNA and protein levels and activated the ERK pathway. Suppressing ERK with U0126 (an ERK inhibitor) or knocking down ERK with siRNA decreased BaP-induced MUC5AC expression. The luciferase activity transfected with the MUC5AC promoter and cAMP-response element (CRE) was increased after BaP treatment, whereas CREB siRNA suppressed the BaP-induced overexpression of MUC5AC. In addition, BaP increased mitochondrial ROS production, and Mito-TEMP, a mitochondrial ROS inhibitor, inhibited BaP-induced MUC5AC expression and ERK activation. BaP increased the mRNA levels of CYP1A1 and CYP1B1, while Alizarin, a CYP1s inhibitor, suppressed the effects of BaP, including the MUC5AC overexpression, ERK activation and mitochondrial ROS generation. BaP induced the translocation of aryl hydrocarbon receptor (AhR) from the cytoplasm to the nucleus. SiRNA-mediated knockdown or chemical inhibition of AhR decreased the BaP-induced expression of MUC5AC, while the overexpression of AhR significantly enhanced the BaP-induced expression of MUC5AC. ITE, an endogenous AhR ligand, also upregulated the mRNA and protein expression of MUC5AC. Furthermore, resveratrol treatment inhibited the BaP-induced MUC5AC overexpression, AhR translocation, mitochondrial ROS production and ERK pathway activation. CONCLUSION: Here, we highlighted the crucial role of AhR/mitochondrial ROS/ERK pathway activation in BaP-induced MUC5AC overexpression and identified resveratrol as a promising drug to reduce BaP-induced MUC5AC overexpression.

Qi-Xian Decoction Upregulated E-cadherin Expression in Human Lung Epithelial Cells and Ovalbumin-Challenged Mice by Inhibiting Reactive Oxygen Species-Mediated Extracellular-Signal-Regulated Kinase (ERK) Activation.

BACKGROUND Loss of the epithelial barrier is characterized by a reduction in E-cadherin expression and is a hallmark of asthma. Qi-xian decoction (QXT) is a Chinese medicinal formula that has been used to effectively treat asthma. This study aimed to investigate the effect of QXT on E-cadherin expression in human lung epithelial 16HBE cells and ovalbumin-challenged mice and to explore the underlying molecular mechanism. MATERIAL AND METHODS Ovalbumin (OVA)-induced mice were used as a model of asthma. Real-time PCR and Western blotting were utilized to examine mRNA and protein levels. Lung tissue reactive oxygen species (ROS) levels were evaluated using dichloro-dihydro-fluorescein diacetate (DCFH-DA). Serum superoxide dismutase (SOD) and the total antioxidant capacity (TAOC) were measured via enzyme-linked immunosorbent assay (ELISA)-based analyses. 16HBE cells were utilized to explore the effect of QXT or hydrogen peroxide (H2O2) on the expression of E-cadherin in vitro. RESULTS We found that QXT treatment increased E-cadherin expression and decreased extracellular-signal-regulated kinase (ERK) phosphorylation levels in the lung tissues of OVA-challenged mice. QXT also downregulated ROS levels and increased serum SOD and TAOC levels in OVA-challenged mice. In vitro studies demonstrated that increased ROS generation induced by H2O2 resulted in decreased E-cadherin expression levels in 16HBE cells, which was attenuated by inhibition of ERK signaling. Moreover, the H2O2-induced downregulation of E-cadherin expression, increased ROS generation, and ERK activation in 16HBE cells were restored by treatment with QXT water or ethanol extract. CONCLUSIONS These data demonstrate that one mechanism by which QXT protects against asthma is to restore E-cadherin expression in vivo and in vitro by inhibiting ROS-mediated ERK activation.

Graphene-Based Infrared Position-Sensitive Detector for Precise Measurements and High-Speed Trajectory Tracking.

Noncontact optical sensing plays an important role in various applications, for example, motion tracking, pilotless automobile, precision machining, and laser radars. A device with features of high resolution, fast response, and safe detection (operation wavelength at infrared (IR)) is highly desired in such applications. Here, a near IR position-sensitive detector constructed by graphene-Ge Schottky heterojunction has been demonstrated. The device shows high responsivity (minimum detectable power of ∼10 nW), excellent spatial resolution (<1 µm), fast response time (∼µs), and could operate in a wide spectral range (from visible to ∼1600 nm). Applications of precise angle (∼5 × 10-6 degree) and vibration frequency (up to 10 kHz) measurements, as well as the trajectory tracking of a high-speed infrared target (∼100 km/h), have been realized based on this device. This work therefore provides a promising route for a high-performance noncontact IR optical sensing system.

Thermally enhanced optical contrast of graphene oxide for thickness identification.

We present a simple, but rapid and accurate approach to identify the layer number of graphene oxide (GO) by using its thermally enhanced optical contrast via vacuum heating. As expected, changes have been observed both in the thicknesses and chemical structures of the material upon the thermal treatment, which can be attributed to the reduction of the amount of intercalated water and oxygen content. This results in the increase of refractive index and absorption coefficient approaching the values for intrinsic graphene. Finally, we achieve an almost complete recovery of optical contrast of GO compared with the one of graphene. The method would be made suitable for the thickness identification of mass-produced GO since it can greatly facilitate sample evaluation and manipulation, and provide immediate feedback to improve synthesis and processing strategies.

Ultrasonic exfoliated ReS2 nanosheets: fabrication and use as co-catalyst for enhancing photocatalytic efficiency of TiO2 nanoparticles under sunlight.

Rhenium disulfide (ReS2) is an interesting kind of transition metal dichalcogenide (TMD) because of its thickness-independent and suitable direct-bandgap structure, which could enable highly efficient solar-energy conversion efficiency. Here, we demonstrate an ultrasonic liquid exfoliation technique in combination with grinding to produce high quality ReS2 nanosheets (NSs) on a large scale. After combination with TiO2 nanoparticles, the co-catalytic performance of TiO2@ReS2 nanocomposites is investigated, which presents dramatically enhanced degradation activity of organic pigments under sunlight illumination in comparison with pure TiO2 nanoparticles. The underlying mechanism of enhanced photocatalytic activity can be attributed to improved separation efficiency of photogenerated electron-hole pairs in TiO2@ReS2 nanocomposites, which is confirmed by photoluminescence analysis and photoelectrochemical measurements. Our results demonstrate that the layered ReS2 NS is a promising two-dimensional supporting platform for photocatalysis and moreover it could also provide a new perspective on TMDs co-catalyst.

Soft hydrogen plasma induced phase transition in monolayer and few-layer MoTe2.

Phase transition from the semiconducting hexagonal (2H) phase to the metallic monoclinic (1T') phase in two-dimensional (2D) transition metal dichalcogenides like MoTe2 is not only of great importance in fundamental study but also of technological significance for broad device applications. Here we report a universal, facile, scalable and reversible phase engineering technique (between 2H and 1T' phases) for both monolayer and few-layer MoTe2 based on a soft hydrogen plasma treatment. The 2H â†’ 1T' transition was confirmed by a series of characterizations including Raman spectra and mapping studies, XPS analysis and FET device measurements at varying temperatures. We attribute the phase transition to the warping of Te-Mo bonds and the lateral sliding of the top Te-layer induced by the soft hydrogen ion bombardment according to both the structural and electronic characterizations as well as the horizontal comparison with the cases of Ar or O2 plasma treatment. We have also prepared a 2D heterostructure containing periodical 2H and 1T' MoTe2 and showed that such phase transition can be readily reversed by post annealing. These results thus provide a robust and efficient approach for the phase engineering of monolayer and few-layer MoTe2 and could aid the development of 2D optoelectronic, memory and reconfigurable devices.

Two-dimensional transition metal dichalcogenides: interface and defect engineering.

Two-dimensional (2D) transition metal dichalcogenides (TMDCs) have been considered as promising candidates for next generation nanoelectronics. Because of their atomically-thin structure and high surface to volume ratio, the interfaces involved in TMDC-based devices play a predominant role in determining the device performance, such as charge injection/collection at the metal/TMDC interface, and charge carrier trapping at the dielectric/TMDC interface. On the other hand, the crystalline structures of TMDCs are enriched by a variety of intrinsic defects, including vacancies, adatoms, grain boundaries, and substitutional impurities. Customized design and engineering of the interfaces and defects provides an effective way to modulate the properties of TMDCs and finally enhance the device performance. Herein, we summarize and highlight recent advances and state-of-the-art investigations on the interface and defect engineering of TMDCs and their corresponding applications in electronic and optoelectronic devices. Various interface engineering approaches for TMDCs are overviewed, including surface charge transfer doping, TMDC/metal contact engineering, and TMDC/dielectric interface engineering. Subsequently, different types of structural defects in TMDCs are introduced. Defect engineering strategies utilized to modulate the optical and electronic properties of TMDCs, as well as the developed high-performance and functional devices are summarized. Finally, we highlight the challenges and opportunities for interface and defect engineering in TMDC materials for electronics and optoelectronics.