Inhibition of tooth demineralization caused by Streptococcus mutans biofilm via antimicrobial treatment using hydrogen peroxide photolysis.

OBJECTIVES: An antimicrobial technique utilizing hydroxyl radicals generated by the photolysis of 3% H2O2 has been developed recently. The present study aimed to evaluate the effect of H2O2 photolysis treatment on tooth demineralization caused by Streptococcus mutans biofilm. MATERIALS AND METHODS: To induce tooth demineralization, S. mutans biofilm was allowed to form on the maxillary first molars collected from Wistar rats via 24-h culturing. The samples were immersed in 3% H2O2 and irradiated with 365-nm LED (H2O2 photolysis treatment). Viable bacterial counts in the biofilm were evaluated immediately after treatment and after an additional 30-h culturing by colony counting. The acidogenicity of the biofilm, re-established 30 h after treatment, was assessed by measuring the pH. The effect of H2O2 photolysis treatment on tooth demineralization was assessed by measuring the depth of the radiolucent layer in micro-CT images. RESULTS: H2O2 photolysis significantly reduced viable bacterial counts in the biofilm to 3.7 log colony forming units (CFU)/sample, while the untreated group had 7.9 log CFU/sample. The pH of the biofilm re-established after treatment (6.6) was higher than that of the untreated group (5.3). In line with the pH measurement, the treatment group had a significantly lower depth of radiolucent layer in dentin than the untreated group. CONCLUSIONS: H2O2 photolysis treatment was effective not only in killing the biofilm-forming S. mutans but also in lowering the acidogenicity of the biofilm. Thus, this technique could inhibit tooth demineralization. CLINICAL RELEVANCE: H2O2 photolysis can be applicable as a new dental caries treatment.

Putative Mechanisms Underlying the Beneficial Effects of Polyphenols in Murine Models of Metabolic Disorders in Relation to Gut Microbiota.

The beneficial effects of polyphenols on metabolic disorders have been extensively reported. The interaction of these compounds with the gut microbiota has been the focus of recent studies. In this review, we explored the fundamental mechanisms underlying the beneficial effects of polyphenols in relation to the gut microbiota in murine models of metabolic disorders. We analyzed the effects of polyphenols on three murine models of metabolic disorders, namely, models of a high-fat diet (HFD)-induced metabolic disorder, dextran sulfate sodium (DSS)-induced colitis, and a metabolic disorder not associated with HFD or DSS. Regardless of the model, polyphenols ameliorated the effects of metabolic disorders by alleviating intestinal oxidative stress, improving inflammatory status, and improving intestinal barrier function, as well as by modulating gut microbiota, for example, by increasing the abundance of short-chain fatty acid-producing bacteria. Consequently, polyphenols reduce circulating lipopolysaccharide levels, thereby improving inflammatory status and alleviating oxidative imbalance at the lesion sites. In conclusion, polyphenols likely act by regulating intestinal functions, including the gut microbiota, and may be a safe and suitable therapeutic agent for various metabolic disorders.

New nitrogen-compounds, penicidones E and F, produced by the fungal strain Oidiodendron sp. FKI-7498.

The nitrogen rule in mass spectrometry was used to search for new nitrogen-compounds from microbial metabolites. During this program, two new nitrogen-containing compounds, penicidones E and F, were discovered from the filamentous fungal strain FKI-7498, which was isolated from soil collected in Tokushima, Japan, and identified as Oidiodendron sp. by sequence analysis of the internal transcribed spacer region, including 5.8S ribosomal RNA. The structures of penicidones E and F were determined by mass spectrometry, nuclear magnetic resonance spectroscopy, and chemical modification analyses. These analyses revealed that penicidones E and F have a core structure of 3,5-dihydroxy-2-(4-pyridone-3-carbonyl)benzoic acid. Penicidone E exhibited hydroxyl radical scavenging activity.

Effects of polyphenols on doxorubicin-induced oral keratinocyte cytotoxicity and anticancer potency against oral cancer cells.

BACKGROUND: Normal human oral keratinocytes are highly sensitive to anticancer drugs including doxorubicin. Resveratrol, epigallocatechin gallate, and tannic acid are polyphenolic compounds that were reported to have cardioprotective effect when combined with doxorubicin. However, it is unknown whether these polyphenols could protect normal human oral keratinocytes against doxorubicin-induced cytotoxicity without weakening its cytotoxic potential against oral cancer cells. Here, we examined the effects of the 3 polyphenolic compounds on doxorubicin-induced cytotoxicity in normal human oral keratinocytes and also investigated their effects on doxorubicin potency in HSC-2 human oral squamous cell carcinoma cells. METHODS: Cell viability was evaluated, followed by the analysis of apoptosis and necrosis. The changes in intracellular reactive oxygen species at the early stage after treatment were also examined. RESULTS: The results revealed that resveratrol in combination with doxorubicin additively augmented doxorubicin cytotoxicity in both types of cells. However, epigallocatechin gallate and tannic acid at a certain concentration mitigated the doxorubicin-induced keratinocyte toxicity mainly due to reduced doxorubicin-induced necrosis in normal human oral keratinocytes without weaken doxorubicin anticancer efficacy. The exact mechanism is still unknown but intracellular reactive oxygen species might be not the sole factor. CONCLUSIONS: This study for the first time reported the effects of resveratrol, epigallocatechin gallate, and tannic acid on doxorubicin-induced cytotoxicity in normal oral keratinocytes and oral cancer cells. The combined use of epigallocatechin gallate or tannic acid with doxorubicin at a certain concentration could mitigate doxorubicin-induced keratinocyte cytotoxicity without weakening doxorubicin anticancer efficacy.

Oral mucosal irritation study in hamster to evaluate a therapeutic apparatus using hydrogen peroxide photolysis for periodontitis treatment.

We conducted an oral mucosal irritation study in hamsters to evaluate a therapeutic apparatus using hydrogen peroxide (H2O2) photolysis for periodontitis treatment (ISO 10993-Part 10, Annex B.3). The cheek pouches in 15 male hamsters were allocated to one of six groups. Group 1 received pure water treatment (control group). Group 2 received laser irradiation at 80 mW. Group 3 received 3% H2O2. Groups 4-6 received laser irradiation of 3% H2O2 at 80, 40, and 20 mW, respectively. The total treatment time was set at 7 min and treatment was repeated three times at approximately 1-h intervals. Macroscopic and microscopic histologic observations of the treated sites were performed immediately after each treatment and/or 24 h after the last treatment. The mean scores in macroscopic and histologic examinations in all six groups were 0. Accordingly, irritation indices calculated by subtracting the mean score in each experimental group from that in the control group (Group 1) were 0. Our results suggest that treatment with the apparatus has no mucosal irritation potential in hamster cheek pouches under test conditions simulating clinical conditions.

Fatigue analysis of computer-aided design/computer-aided manufacturing resin-based composite vs. lithium disilicate glass-ceramic.

Resin-based composite molar crowns made by computer-aided design/computer-aided manufacturing (CAD/CAM) systems have been proposed as an inexpensive alternative to metal-ceramic or all-ceramic crowns. However, there is a lack of scientific information regarding fatigue resistance. This study aimed to analyze the fatigue behavior of CAD/CAM resin-based composite compared with lithium disilicate glass-ceramic. One-hundred and sixty bar-shaped specimens were fabricated using resin-based composite blocks [Lava Ultimate (LU); 3M/ESPE] and lithium disilicate glass-ceramic [IPS e.max press (EMP); Ivoclar/Vivadent]. The specimens were divided into four groups: no treatment (NT); thermal cycling (TC); mechanical cycling (MC); and thermal cycling followed by mechanical cycling (TCMC). Thermal cycling was performed by alternate immersion in water baths of 5°C and 55°C for 5 × 10(4) cycles. Mechanical cycling was performed in a three-point bending test, with a maximum load of 40 N, for 1.2 × 10(6) cycles. In addition, LU and EMP molar crowns were fabricated and subjected to fatigue treatments followed by load-to-failure testing. The flexural strength of LU was not severely reduced by the fatigue treatments. The fatigue treatments did not significantly affect the fracture resistance of LU molar crowns. The results demonstrate the potential of clinical application of CAD/CAM-generated resin-based composite molar crowns in terms of fatigue resistance.

Microbicidal action of photoirradiated aqueous extracts from wine lees.

Wine lees, a major waste product of winemaking, is a rich source of polyphenolic compounds. LED-light irradiation at 400-nm elicited microbicidal activity of aqueous extract from wine lees (WLE) against Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans, in addition to reactive oxygen species (ROS) formation, including hydroxyl radical (·OH) and hydrogen peroxide (H2O2). Although treatment for 20 min of photoirradiation alone exerted bactericidal activity with a 2- to 3-log reduction, photoirradiated WLE for 20 min achieved a 5-log or greater reduction in viable S. aureus and P. aeruginosa cells. Regarding C. albicans, a 1-log reduction (90 % reduction) of viable cells was achieved by photoirradiated WLE for 40 min, whereas photoirradiation alone did not show any fungicidal effect. ROS analyses revealed that approximately 170 µM ·OH and 600 µM H2O2 were generated in photoirradiated WLE for 20 min. Because the bactericidal activity of photoirradiated WLE was abolished by ·OH scavengers, ROS, especially highly oxidative ·OH, may be responsible for the microbicidal activity of photoirradiated WLE. In addition to its microbicidal activity, WLE may act as an antioxidant as it exerted radical scavenging activity against 2,2-diphenyl-1-picrylhydrazyl, a stable free radical.

Fracture resistance of computer-aided design/computer-aided manufacturing-generated composite resin-based molar crowns.

The aim of this study was to investigate whether different fabrication processes, such as the computer-aided design/computer-aided manufacturing (CAD/CAM) system or the manual build-up technique, affect the fracture resistance of composite resin-based crowns. Lava Ultimate (LU), Estenia C&B (EC&B), and lithium disilicate glass-ceramic IPS e.max press (EMP) were used. Four types of molar crowns were fabricated: CAD/CAM-generated composite resin-based crowns (LU crowns); manually built-up monolayer composite resin-based crowns (EC&B-monolayer crowns); manually built-up layered composite resin-based crowns (EC&B-layered crowns); and EMP crowns. Each type of crown was cemented to dies and the fracture resistance was tested. EC&B-layered crowns showed significantly lower fracture resistance compared with LU and EMP crowns, although there was no significant difference in flexural strength or fracture toughness between LU and EC&B materials. Micro-computed tomography and fractographic analysis showed that decreased strength probably resulted from internal voids in the EC&B-layered crowns introduced by the layering process. There was no significant difference in fracture resistance among LU, EC&B-monolayer, and EMP crowns. Both types of composite resin-based crowns showed fracture loads of >2000 N, which is higher than the molar bite force. Therefore, CAD/CAM-generated crowns, without internal defects, may be applied to molar regions with sufficient fracture resistance.

Cutting efficiency of diamond burs operated with electric high-speed dental handpiece on zirconia.

Zirconia-based dental restorations are becoming used more commonly. However, limited attention has been given to the difficulties experienced, concerning cutting, in removing the restorations when needed. The aim of the present study was to compare the cutting efficiency of diamond burs, operated using an electric high-speed dental handpiece, on zirconia (Zir) with those on lithium disilicate glass-ceramic (LD) and leucite glass-ceramic (L). In addition, evaluation of the cutting efficiency of diamond burs on Zir of different thicknesses was performed. Specimens of Zir were prepared with thicknesses of 0.5, 1.0, 2.0, and 4.0 mm, and specimens of LD and L were prepared with a thickness of 1.0 mm. Cutting tests were performed using diamond burs with super coarse (SC) and coarse (C) grains. The handpiece was operated at 150,000 rpm with a cutting force of 0.9 N. The results demonstrated that cutting of Zir took about 1.5- and 7-fold longer than cutting of LD and L, respectively. The SC grains showed significantly higher cutting efficiency on Zir than the C grains. However, when the thickness of Zir increased, the cutting depth was significantly decreased. As it is suggested that cutting of zirconia is time consuming, this should be taken into consideration in advance when working with zirconia restorations.

Fracture resistance of monolithic zirconia molar crowns with reduced thickness.

OBJECTIVES: The purpose of the present study was to analyze the relationship between fracture load of monolithic zirconia crowns and axial/occlusal thickness and to evaluate the fracture resistance of monolithic zirconia crowns with reduced thickness in comparison with that of monolithic lithium disilicate crowns with regular thickness. MATERIALS AND METHODS: Monolithic zirconia crowns (Lava Plus Zirconia, 3M/ESPE) with specified axial/occlusal thicknesses and lithium disilicate crowns (IPS e.max press, Ivoclar/Vivadent) with regular thickness were fabricated using a dental CAD/CAM system and a press technique, respectively. The crowns cemented onto dies were loaded until fracture. Based on measurements of the crown thickness made by micro-CT and the fracture load, multiple regression analysis was performed. RESULTS: It was revealed that the occlusal thickness significantly affected the fracture load (p < 0.01), but the axial thickness did not (p = 0.2828). Although the reduction of the occlusal thickness decreased the fracture resistance of the monolithic zirconia crowns, the fracture load of the zirconia crowns with the occlusal thickness of 0.5 mm (5558 ± 522 N) was significantly higher than that of lithium disilicate crowns with an occlusal thickness of 1.5 mm (3147 ± 409 N). CONCLUSION: Within the limitations of the present study, it is suggested that monolithic zirconia crown with chamfer width of 0.5 mm and occlusal thickness of 0.5 mm can be used in the molar region in terms of fracture resistance.

Alleviation effect of arbutin on oxidative stress generated through tyrosinase reaction with L-tyrosine and L-DOPA.

BACKGROUND: Hydroxyl radical that has the highest reactivity among reactive oxygen species (ROS) is generated through L-tyrosine-tyrosinase reaction. Thus, the melanogenesis might induce oxidative stress in the skin. Arbutin (p-hydroxyphenyl-ß-D-glucopyranoside), a well-known tyrosinase inhibitor has been widely used for the purpose of skin whitening. The aim of the present study was to examine if arbutin could suppress the hydroxyl radical generation via tyrosinase reaction with its substrates, L-tyrosine and L-DOPA. RESULTS: The hydroxyl radical, which was determined by an electron spin resonance-spin trapping technique, was generated by the addition of not only L-tyrosine but L-DOPA to tyrosinase in a concentration dependent manner. Arbutin could inhibit the hydroxyl radical generation in the both reactions. CONCLUSION: It is presumed that arbutin could alleviate oxidative stress derived from the melanogenic pathway in the skin in addition to its function as a whitening agent in cosmetics.

Mutagenicity assessment of high-power 1.6-THz pulse laser radiation.

The effect of terahertz (THz) radiation has been studied in medicine. However, there is a lack of scientific information regarding its possible mutagenicity. Therefore, the present study aimed to assess the mutagenicity of 1.6 THz laser irradiation. The Ames test was conducted using five bacterial tester strains. The bacteria were subjected to (i) 1.6 THz laser irradiation at 3.8 mW/cm2 for 60 min using a tabletop THz pulse laser system, (ii) ultraviolet irradiation, (iii) treatment with positive control chemicals (positive control) or (iv) treatment with the solvent used in the positive control (negative control). After treatment, the bacterial suspensions were cultured on minimal glucose agar to determine the number of revertant colonies. In addition, the comet assay was performed using fibroblasts (V79) to assess possible DNA damage caused by the THz laser irradiation. The Ames test demonstrated that the THz laser irradiation did not increase the number of revertant colonies compared to that in the negative control group, whereas the ultraviolet irradiation and positive control treatment increased the number of revertant colonies. Thus, 1.6 THz laser irradiation is unlikely to be mutagenic. The comet assay additionally suggests that the THz laser irradiation unlikely induce cellular DNA damage.

Cell viability score (CVS) as a good indicator of critical concentration of benzalkonium chloride for toxicity in cultured ocular surface cell lines.

Cytotoxicity of benzalkonium chloride (BAK) is a major factor affecting drug cytotoxicity. This study aimed to determine the critical concentration of BAK for cultured ocular cells, using SIRC (rabbit corneal epithelium), BCE C/D-1b (bovine corneal epithelial cells), RC-1 (rabbit corneal epithelium), and Chang (human conjunctival cells). Cell viability was determined following the exposure of cells to 11 concentrations of BAK for 10, 30, or 60 min using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) and neutral red assays, and the cell viability score (CVS) was used to evaluate comprehensively the toxicity of BAK. The CVS system consists of two values. The CVS50 was determined by the number of measurements for viability ≥50% of control. The CVS40/80 was calculated as follows: CVS40/80=(number of measurements for viability values >80%)-(number of measurements for viability values <40%). Both %CVS50 and %CVS40/80 decreased with concentrations of BAK. When BAK concentrations were 0.01% or higher, %CVS50 and %CVS40/80 became 0 and less than -90, respectively. Meanwhile, when BAK concentrations were 0.001% or lower, %CVS50 became 100. In the case of %CVS40/80, when the BAK concentrations were 0.002% or lower, the values reached 75 or more, and when 0.0005% or lower, the %CVS40/80 value reached 100. Accordingly, BAK induced very low cytotoxicity in the cultured ocular cell lines at concentrations of 0.002% or lower. The concentration-dependency confirmed that the CVS score is useful for expressing drug cytotoxicity in a simple and comprehensive manner.

Synergistic effect of thermal energy on bactericidal action of photolysis of H2O2 in relation to acceleration of hydroxyl radical generation.

The purpose of the present study is to evaluate the effect of thermal energy on the yield of and the bactericidal action of hydroxyl radical generated by photolysis of H(2)O(2). Different concentrations of H(2)O(2) (250, 500, 750, and 1,000 mM) were irradiated with light-emitting diodes (LEDs) at a wavelength of 400 ± 20 nm at 25°C to generate hydroxyl radical. The 500 mM H(2)O(2) was irradiated with the LEDs at different temperatures (25, 35, 45, and 55°C). Electron spin resonance spin trapping analysis showed that the yield of hydroxyl radicals increased with the temperature, as well as the concentration of H(2)O(2). Streptococcus mutans and Enterococcus faecalis were used in the bactericidal assay. The LED-light irradiation of the bacterial suspensions in 500 mM H(2)O(2) at 25°C could hardly kill the bacteria within 3 min, while the bactericidal effect was markedly enhanced with the temperature rise. For instance, a temperature increase to 55°C resulted in >99.999% reduction of viable counts of both bacterial species only within 1 min. The photolysis of 500 mM H(2)O(2) at 55°C could reduce the viable counts of bacteria more efficiently than did the photolysis of 1,000 mM H(2)O(2) at 25°C, although the yields of hydroxyl radical were almost the same under the both conditions. These findings suggest that the thermal energy accelerates the generation of hydroxyl radical by photolysis of H(2)O(2), which in turn results in a synergistic bactericidal effect of hydroxyl radical and thermal energy.

Microbial resistance in relation to catalase activity to oxidative stress induced by photolysis of hydrogen peroxide.

The purpose of the present study was to evaluate the mechanism of microbial resistance to oxidative stress induced by photolysis of hydrogen peroxide (H(2)O(2)) in relation to microbial catalase activity. In microbicidal tests, Staphylococcus aureus and Candida albicans were killed and this was accompanied by production of hydroxyl radicals. C. albicans was more resistant to hydroxyl radicals generated by photolysis of H(2)O(2) than was S. aureus. A catalase activity assay demonstrated that C. albicans had stronger catalase activity; accordingly, catalase activity could be one of the reasons for the resistance of the fungus to photolysis of H(2)O(2). Indeed, it was demonstrated that C. albicans with strong catalase activity was more resistant to photolysis of H(2)O(2) than that with weak catalase activity. Kinetic analysis using a modified Lineweaver-Burk plot also demonstrated that the microorganisms reacted directly with hydroxyl radicals and that this was accompanied by decomposition of H(2)O(2). The results of the present study suggest that the microbicidal effects of hydroxyl radicals generated by photolysis of H(2)O(2) can be alleviated by decomposition of H(2)O(2) by catalase in microorganisms.

Effects of dietary fucoxanthin on cholesterol metabolism in diabetic/obese KK-A(y) mice.

BACKGROUND: Fucoxanthin is a xanthophyll present in brown seaweeds and has several beneficial effects, including anti-obesity and anti-diabetic effects. However, we and another group previously observed that fucoxanthin increases serum cholesterol levels in rodents. Cholesterol is an important component of cell membranes and biosynthesis of bile acids. Serum cholesterol levels are also closely associated with atherosclerosis. Therefore, we sought to identify the mechanism underlying the increase in serum cholesterol levels by fucoxanthin. METHODS: Diabetic/obese KK-A(y) mice were fed a diet containing 0.2% fucoxanthin for 4 weeks. The mice were sacrificed, and total blood samples were collected for the measurement of serum total cholesterol, HDL-cholesterol and non-HDL-cholesterol levels. Cholesterol content in tissues was also analyzed. Real-time PCR and Western blotting were performed to determine hepatic mRNA and protein expression of genes involved in cholesterol metabolism, respectively. RESULTS: Dietary fucoxanthin significantly increased serum HDL and non-HDL cholesterol levels, and reduced hepatic cholesterol content. In liver, the expression of SREBP1, SREBP2 and their target genes involved in cholesterol biosynthesis significantly increased and tended to increase in the fucoxanthin-fed mice, respectively. In contrast, hepatic levels of LDLR and SR-B1 proteins which is important factors for LDL-cholesterol and HDL-cholesterol uptake in the liver from serum, decreased to 60% and 80% in the fucoxanthin-fed mice, respectively, compared with the control mice. Further, we found that dietary fucoxanthin significantly increased the mRNA expression of proprotein convertase subtilisin/kexin type 9 (PCSK9), which enhances intracellular degradation of LDLR in lysosomes. CONCLUSIONS: Fucoxanthin increased HDL-cholesterol and non-HDL-cholesterol levels in KK-A(y) mice by inducing SREBP expression and reduced cholesterol uptake in the liver via down-regulation of LDLR and SR-B1, resulted in increased serum cholesterol in the mice.

Virucidal activity of alcohol-based hand rub disinfectants.

We investigated the virucidal activity of commercially available alcohol-based hand rub products against coxsackievirus A7, B5, feline calicivirus F9, and human adenovirus type 3, type 7, type 8 using susceptible cell lines, Vero cells, CRFK cells, and A549 cells. Fifteen tested hand rub products were ethanol (EtOH) for disinfection (Japanese Pharmacopoeia Grade), two EtOH-based products, one povidone iode-containing product, one alkyldiaminoethylglycine hydrochloride-containing product, six benzalkonium chloride (BAK)-containing products, and four chlorohexidine gluconate (CHG)-containing products. Some active ingredients (BAK, benzetonium chloride, and CHG) were diluted with EtOH to make 0.5% and 0.2% solutions. Virus inactivation rates were calculated after contact with each hand rub product for 10 or 60 seconds. Of the hand rub products tested, only the povidone iode-based product showed antiviral activity superior to that of EtOH against all the strains. EtOH solutions of active ingredients (0.2% and 0.5%) also showed decreased antiviral activity. In conclusion, antiviral activity of all the commercially available alcohol-based hand rub products except that containing povidone idode was dependent on their active ingredients. The povidone idode-containing hand rub product kept its effectiveness even after the dilution with EtOH. Although alcohol-based hand rub products are convenient and suitable for the control of some microbes, they are not generally recommended for the control of viral infections.

In vitro assessment of the cytotoxicity of six topical antibiotics to four cultured ocular surface cell lines.

To determine the cytotoxicity of antibiotic eyedrops to ocular surface cells using a semi-quantitative method, a range of commercially available antibiotic eyedrops were assessed by using three corneal cell lines and one conjunctival cell line. All antibiotic solutions were free of benzalkonium chloride. Cell viability was determined by the MTT assay and neutral red assay following the exposure of cells to the undiluted, 2- and 10-fold diluted drugs for 10, 30, and 60 min. Toxicity was compared using % cell viability score (%CVS) . The tested eyedrops and values of %CVS50 and %CVS40/80 were Bestron(®) (cefmenoxime, 100, 94) , Panimycin(®) (dibekacin, 86, 58) , Noflo(®) (norfloxacin, 90, 50) , Cravit(®) (levofloxacin, 86, 46) , Tosfulo(®) (tosufloxacin, 57, -3) , and Vigamox(®) (moxifloxacin, 57, -6) . Cell viability markedly increased after dilution. For instance, cell viability assayed by MTT was > 80% for all the measurements in antibiotics diluted 10-fold, and the rate of the measurements showing > 80% cell viability decreased to 43% (31 out of 72 measurements) in the solutions diluted 2-fold. Of the drugs tested, Bestron(®) containing cefmenoxime showed the weakest toxicity. Vigamox(®) containing moxifloxacin and Tosuflo(®) containing tosufloxacin were more toxic when compared with the other antibiotics. CVS was useful for the comparison of the cytotoxicity of the drugs.

Anti-Osteoporotic Mechanisms of Polyphenols Elucidated Based on In Vivo Studies Using Ovariectomized Animals.

Polyphenols are widely known for their antioxidant activity, i.e., they have the ability to suppress oxidative stress, and this behavior is mediated by the autoxidation of their phenolic hydroxyl groups. Postmenopausal osteoporosis is a common health problem that is associated with estrogen deficiency. Since oxidative stress is thought to play a key role in the onset and progression of osteoporosis, it is expected that polyphenols can serve as a safe and suitable treatment in this regard. Therefore, in this review, we aimed to elucidate the anti-osteoporotic mechanisms of polyphenols reported by in vivo studies involving the use of ovariectomized animals. We categorized the polyphenols as resveratrol, purified polyphenols other than resveratrol, or polyphenol-rich substances or extracts. Literature data indicated that resveratrol activates sirtuin 1, and thereafter, suppresses osteoclastogenic pathways, such as the receptor activator of the nuclear factor kappa B (RANK) ligand (RANKL) pathway, and promotes osteoblastogenic pathways, such as the wingless-related MMTV integration site pathway. Further, we noted that purified polyphenols and polyphenol-rich substances or extracts exert anti-inflammatory and/or antioxidative effects, which inhibit RANKL/RANK binding via the NF-κB pathway, resulting in the suppression of osteoclastogenesis. In conclusion, antioxidative and anti-inflammatory polyphenols, including resveratrol, can be safe and effective for the treatment of postmenopausal osteoporosis based on their ability to regulate the imbalance between bone formation and resorption.

Metabolic Fate of Orally Ingested Proanthocyanidins through the Digestive Tract.

Proanthocyanidins (PACs), which are oligomers or polymers of flavan-3ols with potent antioxidative activity, are well known to exert a variety of beneficial health effects. Nonetheless, their bioaccessibility and bioavailability have been poorly assessed. In this review, we focused on the metabolic fate of PACs through the digestive tract. When oligomeric and polymeric PACs are orally ingested, a large portion of the PACs reach the colon, where a small portion is subjected to microbial degradation to phenolic acids and valerolactones, despite the possibility that slight depolymerization of PACs occurs in the stomach and small intestine. Valerolactones, as microbiota-generated catabolites of PACs, may contribute to some of the health benefits of orally ingested PACs. The remaining portion interacts with gut microbiota, resulting in improved microbial diversity and, thereby, contributing to improved health. For instance, an increased amount of beneficial gut bacteria (e.g., Akkermansia muciniphila and butyrate-producing bacteria) could ameliorate host metabolic functions, and a lowered ratio of Firmicutes/Bacteroidetes at the phylum level could mitigate obesity-related metabolic disorders.