Chemical and Acoustical Mixed-Mapping of Geological Materials from Laser-Induced Plasmas: A Comprehensive Approach to Differentiate Mineral Phases.

The acoustic wave produced alongside laser-induced plasmas can be used in conjunction with the recorded atomic spectra of plasma emission to expand the physicochemical information acquired from a single inspection event. Among the most interesting uses of acoustic information is the differentiation of mineral phases with similar optical responses coexisting in geological targets. In addition, laser-induced plasma acoustics (LIPAc) can provide data related to the inspected material's hardness, density, and compactness. In this paper, we present a dual acoustic-optic laser-based strategy for the generation of high-resolution surface images of mineral samples. By combining simultaneous multimodal LIBS (laser-induced breakdown spectroscopy) and LIPAc spectral data from laser-induced plasmas, we explore the mineralogical composition of rocks embedded in resin matrixes to distinguish their chemical composition as well as their crystal phases based on physical changes caused by the different spatial arrangements of the constituent atoms. The multispectral polyhedron created by merging singular optical maps, one per detected elements, and the coincidental acoustic map enhance the distinction between regions present within the matrix of a host rock as compared to the differentiation yielded by each technique when used separately. The chemical information guides the composition of the mineral phases in the host rock. Then, the physical information obtained from acoustics may reinforce the identification of the detected mineral phase, draw the geological history of the inspected section, and showcase possible transformations, mainly of polymorphic nature. To test the combination proposed herein, we also inspected a septarian nodule featuring an ensemble of mineral phases with different origins. Mixed optical and acoustic responses from laser-produced plasmas of this complex sample allowed us to obtain more specific information. This approach constitutes a reliable and high-throughput tool for studying the surface of geological samples, which can substantially supplement well-established techniques for mineralogical analysis such as Raman spectroscopy and X-ray diffraction.

Study of plasma activated water effect on heavy metal bioaccumulation by Cannabis sativa Using Laser-Induced Breakdown Spectroscopy.

Contamination of the environment with toxic metals such as cadmium or lead is a worldwide issue. The accumulator of metals Cannabis sativa L. has potential to be utilized in phytoremediation, which is an environmentally friendly way of soil decontamination. Novel non-thermal plasma-based technologies may be a helpful tool in this process. Plasma activated water (PAW), prepared by contact of gaseous plasma with water, contains reactive oxygen and nitrogen species, which enhance the growth of plants. In this study, C. sativa was grown in a short-term toxicity test in a medium which consisted of plasma activated water prepared by dielectric barrier discharge with liquid electrode and different concentrations of cadmium or lead. Application of PAW on heavy metal contaminated C. sativa resulted in increased growth under Pb contamination as was determined by ecotoxicology tests. Furthermore, the PAW influence on the bioaccumulation of these metals as well as the influence on the nutrient composition of plants was studied primarily by applying Laser-induced breakdown spectroscopy (LIBS). The LIBS elemental maps show that C. sativa accumulates heavy metals mainly in the roots. The results present a new proof-of-concept in which PAW could be used to improve the growth of plants in heavy metal contaminated environment, while LIBS can be implemented to study the phytoremediation efficiency.

Magnetic microbead-based upconversion immunoassay with laser-induced breakdown spectroscopy readout for the detection of prostate-specific antigen.

Laser-induced breakdown spectroscopy (LIBS) is a promising technique for the readout of immunochemical assays utilizing indirect detection of labels (Tag-LIBS), typically based on nanoparticles. We have previously demonstrated that Tag-LIBS immunoassay employing yttrium-based photon-upconversion nanoparticles (UCNPs) can reach sensitivity similar to commonly used enzyme and fluorescence immunoassays. In this study, we report on further increasing the sensitivity of UCNP-based Tag-LIBS immunoassay by employing magnetic microbeads (MBs) as the solid phase in the determination of cancer biomarker prostate-specific antigen. Due to the possibility of analyte preconcentration, MBs enabled achieving a limit of detection (LOD) of 4.0 pg·mL-1, representing two orders of magnitude improvement compared with equivalent microtiter plate-based assay (LOD of 460 pg·mL-1). In addition, utilizing MBs opens up the possibility of an internal standardization of the LIBS readout by employing iron spectral lines, which improves the assay robustness by compensating for LIBS signal fluctuations and bead-bound immunocomplexes lost throughout the washing steps. Finally, the practical applicability of the technique was confirmed by the successful analysis of clinical samples, showing a strong correlation with the standard electrochemiluminescence immunoassay. Overall, MB-based Tag-LIBS was confirmed as a promising immunoassay approach, combining fast readout, multiplexing possibilities, and high sensitivity approaching upconversion luminescence scanning while avoiding the requirement of luminescence properties of labels.

Laser ablation synthesis of tellurium carbides using tellurium with nanodiamond nanocomposite.

RATIONALE: Carbides, including tellurium carbides (TeC), play crucial roles in diverse applications, but TeC synthesis has not been described in the literature. Laser ablation synthesis (LAS) coupled with mass spectrometry was used here for in situ TeC clusters synthesis and identification of the reaction products to better understand TeC formation. METHODS: Laser desorption ionization time-of-flight mass spectrometry (LDI-TOFMS) was used to generate the TeC clusters and determine their stoichiometry via computer modeling of isotopic patterns. RESULTS: A simple one-pot procedure was developed for Te-nanodiamond nanocomposite preparation. A suspension of fine-powdered Te was mixed with a suspension of nanodiamonds (both in acetonitrile), and the resulting precipitated nanocomposite was suitable for the synthesis of TemCn clusters using LDI. Various unary and binary clusters were formed. The stoichiometry of the novel TemCn clusters, determined via computer modeling of isotopic patterns, is reported here for the first time. CONCLUSIONS: The Te-nanodiamond composite was found to be the most suitable precursor for the generation of TemCn clusters. In total, 35 binary TemCn clusters were identified, when several of them were not obtained using commercial TeC material.

Fresh Cold-Stored Vascular Allografts in Subgenicular Location: Our Experience with Rescue Endovascular Techniques.

BACKGROUND: Critical limb ischemia (CLI) is considered the most severe pattern of peripheral artery disease. CLI is associated with high rates of morbidity and mortality with high risk of limb amputation. In the absence of appropriate autologous grafts, unsuitability of prosthetic bypasses, and endovascular methods, fresh cold-stored venous allografts is an option. Endovascular interventional methods are essential methods for maintaining primary and secondary patency. METHODS: A single-centre retrospective analysis of 82 surgical revascularizations using allogeneic vascular grafts and rescue endovascular techniques restoring and maintaining the patency of these allogeneic revascularizations in the period between July 2005 and July 2021. RESULTS: We have performed 82 allogeneic revascularizations in 75 patients (52 reconstructions in men/63.4%/, 30 reconstructions in women/36.6%/). The median age of patients was 68 years (49 min, 87 max). We subsequently had to intervene a total of 26 bypasses. We intervened in 30 acute occluded allogeneic bypass grafts and 9 failing stenotic bypass grafts. We performed 52 angiographies. The success rate of rescue endovascular procedures in primary allogeneic reconstruction with distal anastomosis to the popliteal artery is statistically significant (P < 0.02) compared to procedures with distal anastomosis to the tibial and pedal bed. The cumulative patency (primary at time) of allogeneic reconstructions in our group was 89% after 1 month, 51.9% after 12 months, 24.2% after 3 years, 9.8% after 5 years. Limb salvage was 72.6% in 1 year, 53% in 3 years, 36.5% in 5 years, respectively. CONCLUSIONS: Cold-stored venous allografts may be used for performing below-the-knee revascularization for CLI with acceptable results, despite the poor long-term patency. Rescue endovascular techniques are an essential method for restoring or maintaining the patency of these reconstructions. These techniques have a high success rate and no other alternative.

Laser-induced breakdown spectroscopy as a readout method for immunocytochemistry with upconversion nanoparticles.

Immunohistochemistry (IHC) and immunocytochemistry (ICC) are widely used to identify cancerous cells within tissues and cell cultures. Even though the optical microscopy evaluation is considered the gold standard, the limited range of useful labels and narrow multiplexing capabilities create an imminent need for alternative readout techniques. Laser-induced breakdown spectroscopy (LIBS) enables large-scale multi-elemental analysis of the surface of biological samples, e.g., thin section or cell pellet. It is, therefore, a potential alternative for IHC and ICC readout of various labels or tags (Tag-LIBS approach). Here, we introduce Tag-LIBS as a method for the specific determination of HER2 biomarker. The cell pellets were labeled with streptavidin-conjugated upconversion nanoparticles (UCNP) through a primary anti-HER2 antibody and a biotinylated secondary antibody. The LIBS scanning enabled detecting the characteristic elemental signature of yttrium as a principal constituent of UCNP, thus indirectly providing a reliable way to differentiate between HER2-positive BT-474 cells and HER2-negative MDA-MB-231 cells. The comparison of results with upconversion optical microscopy and luminescence intensity scanning confirmed that LIBS is a promising alternative for the IHC and ICC readout.

Endovascular Treatment of a Life-threatening Blunt Thoracic Aortic Injury in Polytraumatized Patients - A Single Center Experience.

A retrospective analysis of our group of patients, efficacy, safety and the results of endovascular treatment of descending thoracic aorta by using stentgraft implantation in polytraumatized patients. In the period between 6/2006 and 2/2020, in the processing of data, we analysed retrospectively patients with polytrauma diagnosed with thoracic aortic rupture or transection (TAT) and treated with multiple injuries. Clinical characteristics, complications, pathological features, and hospital follow-up data were retrieved from our group. In our group of 28 polytraumatized patients referred to our Trauma Centre with current TAT, all 28 patients with such a thoracic aortic injury were treated by using thoracic stentgraft implantation. In our group of patients, the average Injury Severity Score (ISS) was 22 for women (min 19, max 27) and 26 for men (min 17, max 41), respectively. We reached 100% technical implantation success rate with our patients. In our group, we had 30-day mortality of 10.7% (3 patients) and the in-hospital mortality was 17.8% (5 patients). Surviving patients had calculated ISS score of 25 (min 17, max 41); dead patients had an ISS score of 28 (min 19, max 34) - p≤0.05. Endovascular treatment of TAT, as a minimally invasive and effective procedure with rapid bleeding control, may increase survival chances for severely compromised polytraumatized patients in the context of multiple-organ damage and the need for a major cardio-vascular surgery.

Laser-induced breakdown spectroscopy as a novel readout method for nanoparticle-based immunoassays.

Laser-induced breakdown spectroscopy (LIBS) was examined as a novel method for readout of microtiter plate immunoassays involving nanoparticles (NP). The so-called Tag-LIBS technique is a sensitive method for the detection of specific biomarkers. It was applied to the determination of NP labels using nanosecond ablation sampling. The NP labels were examined from the bottom of a standard 96-well microtiter plate. Thanks to the flexibility of LIBS instrumentation, both the plasma emission collection and the focusing optics arrangements can be collinearly arranged. The experiments showed that silver NPs and gold NPs can be readily quantified on the bottom of the microtiter plate. Utilizing this technique, a sandwich immunoassay for human serum albumin using streptavidin-coated AgNP labels was developed. The assay has a 10 ng·mL-1 detection limit which is comparable to the sensitivity of fluorometric readout. The main advantage of this LIBS technique is its wide scope in which it enables a detection of almost any type of NP labels, irrespective to any fluorescence or catalytic properties. Owing to the immediate signal response, the relatively simple instrumentation also enables assay automation. The LIBS capability of multi-elemental analyses makes it a promising and fast alternative to other readout techniques, in particular with respect to multiplexed detection of biomarkers. Graphical abstract Laser-induced breakdown spectroscopy (LIBS) is used as a novel readout method of nanoparticle-based immunoassays in microtiter plates. After formation of sandwich immunocomplex, the analyte concentration is quantified as the signal of Ag nanoparticle labels determined by LIBS.

Histopathological changes to the vascular wall after treatment of great saphenous veins using n-butyl-2-cyanoacrylate.

Background: A histopathological examination was conducted on vein samples from six patients who had undergone great saphenous vein sealing with Histoacryl and Lipiodol to treat chronic venous insufficiency of the superficial venous system. Patients and methods: In each patient a sample of the complete vein including the surrounding tissue was obtained through a minor incision under perioperative sonographic monitoring. Each patient had signed an informed consent form. Samples were taken at the following intervals: six days, six weeks, six months, one year, two years, and three years after treatment. Results: N-butyl-2-cyanoacrylate with Lipiodol induces a thrombotic reaction in the acute phase and endothelium is destroyed but no significant inflammation or substantial vascular wall damage is present. In the subsequent period, a foreign body giant cell reaction emerges accompanied by only moderate chronic inflammation that does not extend to the vascular wall or the surrounding tissue. The thrombus is organized with minimal recanalization. The foreign material is gradually degraded, and it is no longer detectable after three years. The vessel wall showed slight sclerotization. Conclusions: N-butyl-2-cyanoacrylate that has been applied gradually degrades over the course of three years accompanied by a giant cell reaction, mild chronic inflammation and cicatrices, but there is minimal recanalization of the obturated section.

Feasibility of Nanoparticle-Enhanced Laser Ablation Inductively Coupled Plasma Mass Spectrometry.

Nanoparticles (NPs) applied to the surface of some solids can increase signals in inductively coupled plasma mass spectrometry (ICPMS). Drops containing 20 and/or 40 nm nanoparticles of Ag and/or Au were deposited on metallic and ceramic/glass samples, and after being dried, both the samples treated with NPs and plain targets were ablated by one pulse per spot. The laser ablation ICPMS (LA-ICPMS) signals were enhanced for metallic samples modified with NPs in comparison to signals produced at the plain, untreated surface. Maps of LA-ICPMS signals recorded for several laser fluences show that the NP-induced signal enhancement exceeds even 2 orders of magnitude for metallic samples. No enhancement was achieved for nonconductive samples. This enhancement is limited to the peripheral annular region of the dried droplet area where NPs are concentrated due to the "coffee stain" effect. Ablation crater profilometric inspection revealed a more uniform material rearrangement over the NP-treated surface compared with the ablated plain target. However, besides a smoother crater bottom, no other evidence of an NP-enhancing effect was noticed, although an increased ablation rate was anticipated. Limits of detection dropped by 1 order of magnitude for the minor elements in the presence of NPs. Observed phenomena depend only on the NP surface concentration but not on the material or size of the NPs. An electron microprobe study of the collected ablation aerosol has shown that aerosol particles consisting of target material are aggregated around the NPs. The hypothesis is that such aggregates exhibit better transport/vaporization efficiency, thus enhancing signals for metallic samples. A detailed study of the suggested mechanism will be continued in ongoing work.

Comparative investigation of toxicity and bioaccumulation of Cd-based quantum dots and Cd salt in freshwater plant Lemna minor L.

The purpose of this study was to determine the toxicity of two different sources of cadmium, i.e. CdCl2 and Cd-based Quantum Dots (QDs), for freshwater model plant Lemna minor L. Cadmium telluride QDs were capped with two coating ligands: glutathione (GSH) or 3-mercaptopropionic acid (MPA). Growth rate inhibition and final biomass inhibition of L. minor after 168-h exposure were monitored as toxicity endpoints. Dose-response curves for Cd toxicity and EC50168h values were statistically evaluated for all sources of Cd to uncover possible differences among the toxicities of tested compounds. Total Cd content and its bioaccumulation factors (BAFs) in L. minor after the exposure period were also determined to distinguish Cd bioaccumulation patterns with respect to different test compounds. Laser-Induced Breakdown Spectroscopy (LIBS) with lateral resolution of 200µm was employed in order to obtain two-dimensional maps of Cd spatial distribution in L. minor fronds. Our results show that GSH- and MPA-capped Cd-based QDs have similar toxicity for L. minor, but are significantly less toxic than CdCl2. However, both sources of Cd lead to similar patterns of Cd bioaccumulation and distribution in L. minor fronds. Our results are in line with previous reports that the main mediators of Cd toxicity and bioaccumulation in aquatic plants are Cd2+ ions dissolved from Cd-based QDs.

Short-term assessment of cadmium toxicity and uptake from different types of Cd-based Quantum Dots in the model plant Allium cepa L.

We report on the toxicity and bioaccumulation of three different types of Cd-based quantum dots (QDs), dispersed in aqueous medium, for a model plant Allium cepa L. It is believed that encapsulation of nanoparticles should reduce their toxicity and increase their stability in different environments; in this work we studied how QD encapsulation affects their phytotoxicity. Core, core/shell, and core/shell/shell QDs (CdTe, CdTe/ZnS, and CdTe/CdS/ZnS QDs capped by 2-mercaptopropionic acid) were tested and CdCl2 was used as a positive control. After 24-h and 72-h exposure, total Cd content (MCd) and bioaccumulation factors (BAFs) were determined in all parts of A. cepa plants (roots, bulb, shoot), and the total length of the root system was monitored as a toxicity end-point. Measurements of total Cd content versus free Cd2+ content (with Differential Pulse Voltammetry, DPV) in exposure media showed differences in chemical stability of the three QD types. Correspondingly, selected QDs showed different toxicity for A. cepa and different Cd bioaccumulation patterns. CdTe QDs were the most toxic; their effect was similar to CdCl2 due to the release of free Cd2+, which was confirmed by the DPV measurements. Plants exposed to CdTe QDs also bioaccumulated the most Cd among all QD exposure groups. CdTe/ZnS QDs showed no toxicity and very low bioaccumulation of Cd in A. cepa; the main source of measured Cd in the plants were QDs adsorbed on their roots, which was confirmed by fluorescence microscopy. On the contrary, CdTe/CdS/ZnS QD toxicity and bioaccumulation patterns were similar to those of CdTe QDs and pointed to unstable CdS/ZnS shells.

Treating great and small saphenous vein insufficiency with histoacryl in patients with symptomatic varicose veins and increased risk of surgery.

BACKGROUND: Treating great and small saphenous vein trunk insufficiency with cyanoacrylate glue is the least taxing treatment method of all available techniques. Due to long-term unavailability of commercial kits with n-butyl-2-cyanoacrylate (histoacryl) in the Czech Republic, we used a modified technique. PATIENTS AND METHODS: Fifty-six limbs in 49 patients suffering from great saphenous vein or small saphenous vein insufficiency in combination with symptomatic chronic venous insufficiency and complicating comorbidities were treated with a modified endovascular cyanoacrylate glue application technique. RESULTS: The immediate success rate of the treatment was 98 %. In follow-up intervals of six weeks, six months, one year, and two years, the anatomical success rates of embolization (recanalization of no more than 5 cm of the junction) were 98, 96, 94, and 94 %, respectively. At identical intervals the venous insufficiency was scored according to the Aberdeen Varicose Vein Questionnaire and the American Venous Clinical Severity Score. In both cases, improvement was demonstrated over the two-year follow-up, with a 0.5 % significance level. Specific clinical signs of venous insufficiency were also evaluated, such as pain, oedema, clearance of varicose veins, and healing of venous ulceration. One severe complication - a pulmonary embolism - was reported, without consequences. CONCLUSIONS: We demonstrated that treating insufficient saphenous veins with modified histoacryl application brought a relief from symptoms of venous insufficiency and that the efficiency of this technique is comparable to commonly used methods.

Age-related changes in the tooth-bone interface area of acrodont dentition in the chameleon.

Chameleon teeth develop as individual structures at a distance from the developing jaw bone during the pre-hatching period and also partially during the post-hatching period. However, in the adult, all teeth are fused together and tightly attached to the jaw bone by mineralized attachment tissue to form one functional unit. Tooth to bone as well as tooth to tooth attachments are so firm that if injury to the oral cavity occurs, several neighbouring teeth and pieces of jaw can be broken off. We analysed age-related changes in chameleon acrodont dentition, where ankylosis represents a physiological condition, whereas in mammals, ankylosis only occurs in a pathological context. The changes in hard-tissue morphology and mineral composition leading to this fusion were analysed. For this purpose, the lower jaws of chameleons were investigated using X-ray micro-computed tomography, laser-induced breakdown spectroscopy and microprobe analysis. For a long time, the dental pulp cavity remained connected with neighbouring teeth and also to the underlying bone marrow cavity. Then, a progressive filling of the dental pulp cavity by a mineralized matrix occurred, and a complex network of non-mineralized channels remained. The size of these unmineralized channels progressively decreased until they completely disappeared, and the dental pulp cavity was filled by a mineralized matrix over time. Moreover, the distribution of calcium, phosphorus and magnesium showed distinct patterns in the different regions of the tooth-bone interface, with a significant progression of mineralization in dentin as well as in the supporting bone. In conclusion, tooth-bone fusion in chameleons results from an enhanced production of mineralized tissue during post-hatching development. Uncovering the developmental processes underlying these outcomes and performing comparative studies is necessary to better understand physiological ankylosis; for that purpose, the chameleon can serve as a useful model species.

Thoracic Outlet Syndrome: A Significant Family Genetic Phenotypic Presentation.

We report on a very rare case of diagnosis and successful surgical treatment of three young family members with a four-fold presentation of thoracic outlet syndrome. In the relevant family case, we are considering and discussing the population incidence, a possible HOX genes disorder, and a significant phenotypic presentation.

Comparison of the level of boron concentrations in black teas with fruit teas available on the Polish market.

The determination of boron by inductively coupled plasma-atomic emission spectrometry has been carried in water-soluble and acid soluble (total content) fractions of 36 samples of traditional black tea and fruit brew. The estimation of the impact of the type of tea on the concentration of boron in water-soluble and acid extracts and potential human health risk from the daily intake of boron was carried out in this study. The levels of boron differed significantly in black and fruit tea types. The mean total content of boron ranged from 8.31 to 18.40 mg/kg in black teas, from 12.85 to 15.13 mg/kg in black tea with fruit flavor, and from 12.09 to 22.77 mg/kg in fruit brews. The degree of extraction of boron in black tea ranged from 8% to 27% and for fruit tea from 17% to 69%. In addition, the values below 25% were of black teas with fruit flavors. The daily intake of B from tea infusions (three cups/day) is still within the average daily intake except for some of the fruit brews which exceed acceptable regulations of the daily intake of total boron by humans. Hence, it may not produce any health risks for human consumption, if other sources of metal contaminated food are not taken at the same time.

Algal biomass analysis by laser-based analytical techniques--a review.

Algal biomass that is represented mainly by commercially grown algal strains has recently found many potential applications in various fields of interest. Its utilization has been found advantageous in the fields of bioremediation, biofuel production and the food industry. This paper reviews recent developments in the analysis of algal biomass with the main focus on the Laser-Induced Breakdown Spectroscopy, Raman spectroscopy, and partly Laser-Ablation Inductively Coupled Plasma techniques. The advantages of the selected laser-based analytical techniques are revealed and their fields of use are discussed in detail.

Pulsed laser ablation synthesis of fresh Te nanoparticles for matrix assisted laser desorption/ionization mass spectrometry (MALDI-MS) applications.

This work aims to demonstrate the potential of pulsed laser ablation synthesis (PLA) of tellurium nanoparticles (Te NPs) for use in matrix assisted laser desorption/ionization mass spectrometry (MALDI-MS) applications. An experimental laboratory setup for PLA synthesis of fresh Te NPs was designed to prevent unwanted aggregation of uncoated Te NPs and avoid the need to use additional modifiers. Performing pulsed laser ablation synthesis in liquid (PLAL) using acetone was found to be the optimal way of preparing Te NPs. Another possibility is to use commercially available laser ablation devices for laser ablation - inductively coupled plasma mass spectrometry (LA-ICP-MS) to perform PLA in a helium atmosphere, but this approach is less efficient and results in the formation of unwanted larger particles. The prepared Te NPs were studied using the transmission electron microscopy (TEM) and dynamic light scattering (DLS) methods. TEM images showed the formation of Te NP nanochains composed of many crystallized Te NPs with sizes ranging from 8 to 15 nm. The various size distributions of the synthesized Te NPs identified using the DLS method correspond to the size distributions of aggregations rather than individual Te NPs. The synthesized Te NPs were used for a pilot study of their possible use with the MALDI-MS technique. An important effect was observed when Te NPs were used to perform a MALDI-MS analysis of the α-cyclodextrin (α-CD) and cucurbit[7]uril (CB7) macrocycles, which consisted in a decline in the formation of matrix adducts. Furthermore, several changes in MALDI-MS mass spectra of intact cells and a positive effect of Te NPs on the crystallization of the MALDI-MS matrix were observed.

A Long-Term Study on the Bactericidal Effect of ZrN-Cu Nanostructured Coatings Deposited by an Industrial Physical Vapor Deposition System.

ZrN-Cu coatings containing two different amounts of Cu (~11 at.% and ~25 at.%) were deposited using an industrial physical vapor deposition (PVD) system. The as-deposited coatings exhibited 100% bactericidal efficiency against Escherichia coli CCM 3988 for an exposure time of 40 min. Subsequently, the samples were attached onto our faculty's door handles for six months to study the coatings' long-term effectiveness and durability under actual operational conditions. The samples were periodically evaluated and it was observed that the coatings with 25 at.% Cu performed better than the ones with 11 at.% Cu. For example, following 15 days of being touched, the bactericidal effectiveness of the sample containing 25 at.% Cu dropped to 65% while it fell to 42% for the sample containing 11 at.%. After 6 months, however, both samples showed bactericidal efficiency of ~16-20%. The bactericidal efficiency of the samples touched for 6 months was successfully restored by polishing them. Furthermore, a group of samples was kept untouched and was also evaluated. The untouched samples with Cu content of ~25 at.% did not show any drop in their bactericidal properties after 6 months. ZrN-Cu coatings were concluded to be promising materials for self-sanitizing application on high-touch surfaces.

Comparison of single and double pulse laser-induced breakdown spectroscopy for the detection of biomolecules tagged with photon-upconversion nanoparticles.

BACKGROUND: Laser-induced breakdown spectroscopy (LIBS) is a well-recognized analytical technique used for elemental analysis. This method is gaining considerable attention also in biological applications thanks to its ability for spatial mapping and elemental imaging. The implementation of LIBS in the biomedical field is based on the detection of metals or other elements that either naturally occur in the samples or are present artificially. The artificial implementation of nanoparticle labels (Tag-LIBS) enables the use of LIBS as a readout technique for immunochemical assays. However, one of the biggest challenges for LIBS to meet immunoassay readout standards is its sensitivity. RESULTS: This paper focuses on the improvement of LIBS sensitivity for the readout of nanoparticle-based immunoassays. First, the LIBS setup was optimized on photon-upconversion nanoparticle (UCNP) droplets deposited on the microtiter plate wells. Two collection optics systems were compared, with single pulse (SP) and collinear double pulse (DP) LIBS arrangements. By deploying the second laser pulse, the sensitivity was improved up to 30 times. The optimized SP and DP setups were then employed for the indirect detection of human serum albumin based on immunoassay with UCNP-based labels. Compared to our previous LIBS study, the detection limit was enhanced by two orders of magnitude, from 10 ng mL-1 to 0.29 ng mL-1. In addition, two other immunochemical methods were used for reference, based on the readout of upconversion luminescence of UCNPs and absorbance measurement with enzyme labels. Finally, the selectivity of the assay was tested and the practical potential of Tag-LIBS was demonstrated by the successful analysis of urine samples. SIGNIFICANCE AND NOVELTY: In this work, we improved the sensitivity of the Tag-LIBS method by combining new labels based on UCNPs with the improved collection optics and collinear DP configuration. In the instrumental setup optimization, the DP LIBS showed better sensitivity and signal-to-noise ratio than SP. The optimizations allowed the LIBS readout to surpass the sensitivity of enzyme immunoassay, approaching the qualities of upconversion luminescence readout, which is nowadays a state-of-the-art readout technique.