Rhesus and cynomolgus macaque immunoglobulin heavy-chain genotyping yields comprehensive databases of germline VDJ alleles.

Definition of the specific germline immunoglobulin (Ig) alleles present in an individual is a critical first step to delineate the ontogeny and evolution of antigen-specific antibody responses. Rhesus and cynomolgus macaques are important animal models for pre-clinical studies, with four main sub-groups being used: Indian- and Chinese-origin rhesus macaques and Mauritian and Indonesian cynomolgus macaques. We applied the (Ig) gene inference tool IgDiscover and performed extensive Sanger sequencing-based genomic validation to define germline VDJ alleles in these 4 sub-groups, comprising 45 macaques in total. There was allelic overlap between Chinese- and Indian-origin rhesus macaques and also between the two macaque species, which is consistent with substantial admixture. The island-restricted Mauritian cynomolgus population displayed the lowest number of alleles of the sub-groups, yet maintained high individual allelic diversity. These comprehensive databases of germline IGH alleles for rhesus and cynomolgus macaques provide a resource toward the study of B cell responses in these important pre-clinical models.

Removal of the Basic and Diazo Dyes from Aqueous Solution by the Frustules of Halamphora cf. salinicola (Bacillariophyta).

Industrial wastes with hazardous dyes serve as a major source of water pollution, which is considered to have an enormous impact on public health. In this study, an eco-friendly adsorbent, the porous siliceous frustules extracted from the diatom species Halamphora cf. salinicola, grown under laboratory conditions, has been identified. The porous architecture and negative surface charge under a pH of 7, provided by the various functional groups via Si-O, N-H, and O-H on these surfaces, revealed by SEM, the N2 adsorption/desorption isotherm, Zeta-potential measurement, and ATR-FTIR, respectively, made the frustules an efficient mean of removal of the diazo and basic dyes from the aqueous solutions, 74.9%, 94.02%, and 99.81% against Congo Red (CR), Crystal Violet (CV), and Malachite Green (MG), respectively. The maximum adsorption capacities were calculated from isotherms, as follows: 13.04 mg g-1, 41.97 mg g-1, and 33.19 mg g-1 against CR, CV, and MG, respectively. Kinetic and isotherm models showed a higher correlation to Pore diffusion and Sips models for CR, and Pseudo-Second Order and Freundlich models for CV and MG. Therefore, the cleaned frustules of the thermal spring-originated diatom strain Halamphora cf. salinicola could be used as a novel adsorbent of a biological origin against anionic and basic dyes.

KIT-5 Structural and Textural Changes in Response to Different Methods of Functionalization with Sulfonic Groups.

In this project, KIT-5 materials were effectively functionalized with sulfonic groups introduced by grafting or the co-condensation method and tested as heterogeneous solid acid catalyst. A co-condensation procedure leading to the stable, -SO3H functionalized KIT-5 materials was successfully established. Moreover, the influence of both synthesis methods on the structural and textural parameters, as well as surface chemistry, morphology, and catalytic activity of -SO3H/KIT-5 materials was thoroughly investigated. The syntheses with 3-mepkaptopropyltrimethoxysilane (MPTMS) acting as a modifying agent resulted in samples in which functional groups were introduced into the structure and/or onto the mesoporous silica surface. The oxidation stage of -SH to -SO3H groups was carried out under mild conditions, using a "green" oxidant (H2O2). The application of different functionalization techniques and the introduction of different amounts of modifying agent allowed for an evaluation of the influence of these parameters on the ordering of the mesoporous structure of KIT-5 materials. The applied methods of assessment of the physicochemical parameters (XRD, low-temperature N2 sorption, TEM) showed that, especially when the co-condensation method was applied, as the number of functional groups increased, the ordering of structure characteristic of KIT-5 decreased. On the other hand, the samples modified by grafting had a stable structure, regardless of the amount of introduced MPTMS. Test reactions carried out on the basis of Friedel-Crafts alkylation process showed that the synthesized materials can be considered promising acid catalysts in heterogeneous catalysis reactions.

Mesoporous Materials: Materials, Technological, and Environmental Applications.

Research on the synthesis and characterization of ordered mesoporous materials with uniquely functionalized external and internal surfaces has intensified in the last decade [...].

SBA-15- and SBA-16-Functionalized Silicas as New Carriers of Niacinamide.

Amorphous silica as a food additive (E 551) is used in food materials (e.g., sweeteners, dairy products) for its anti-caking properties. The physicochemical properties of SiO2 also make it suitable to serve as a carrier of active substances in functional foods, dietary supplements, and drugs. Deficiency of niacinamide (vitamin B3, niacin) leads to several pathologies in the nervous system and causes one of the nutritional diseases called pellagra. The present study focuses on the use of hybrid ordered mesoporous silicas (SBA-15/SBA-16) functionalized with amino groups introduced through grafting or co-condensation with (N-vinylbenzyl)aminoethylaminopropyltrimethoxysilane (Z-6032) as novel carriers of niacinamide. They combine the characteristics of a relatively stable and chemically inert amorphous silica matrix with well-defined structural/textural parameters and organic functional groups that give specific chemical properties. The highest degree of carrier loading with niacinamide (16 wt.%) was recorded for the unmodified SBA-15. On the other hand, the highest degree of niacinamide release characterizes the functionalized SBA-15 sample (60% after 24 h), indicating that the presence of amino groups affects the release profile of niacinamide from the structure of the mesoporous silica.

Photoremoval of Bisphenol A Using Hierarchical Zeolites and Diatom Biosilica.

Bisphenol A (4,4-isopropylidenediphenol, BPA) is an organic compound widely used, e.g., in the production of epoxy resins, plastics, and thermal receipt papers. Unfortunately, bisphenol A has negative effects on human health, which has prompted the search for an effective method of its removal. One of the most promising methods of its elimination is photocatalytic removal. The aim of this study was to design an effective method for the photocatalytic removal of bisphenol A using, for the first time, hierarchical zeolites and ruthenium ion-modified diatom biosilica, and silver as photocatalysts and optimization of the reaction conditions: temperature, pH, and composition of the reaction mixture as well as the electromagnetic wavelength. Additionally, for the first time, the electromagnetic wavelength that would be most suitable for the study was selected. All materials used were initially characterized by XRD and low-temperature nitrogen adsorption/desorption isotherms. Ruthenium ion-modified biosilica proved to be the most effective catalyst for bisphenol A removal, which occurred at a rate higher than 99%.

Nanotechnology-General Aspects: A Chemical Reduction Approach to the Synthesis of Nanoparticles.

The role of nanotechnology is increasingly important in our society. Through it, scientists are acquiring the ability to understand the structure and properties of materials and manipulate them at the scale of atoms and molecules. Nanomaterials are at the forefront of the rapidly growing field of nanotechnology. The synthesis of nanostructured materials, especially metallic nanoparticles, has attracted tremendous interest over the past decade due to their unique properties, making these materials excellent and indispensable in many areas of human activity. These special properties can be attributed to the small size and large specific surface area of nanoparticles, which are very different from those of bulk materials. Nanoparticles of different sizes and shapes are needed for many applications, so a variety of protocols are required to produce monodisperse nanoparticles with controlled morphology. The purpose of this review is firstly to introduce the reader to the basic aspects related to the field of nanotechnology and, secondly, to discuss metallic nanoparticles in greater detail. This article explains the basic concepts of nanotechnology, introduces methods for synthesizing nanoparticles, and describes their types, properties, and possible applications. Of many methods proposed for the synthesis of metal nanoparticles, a chemical reduction is usually preferred because it is easy to perform, cost-effective, efficient, and also allows control of the structural parameters through optimization of the synthesis conditions. Therefore, a chemical reduction method is discussed in more detail-each factor needed for the synthesis of nanoparticles by chemical reduction is described in detail, i.e., metal precursors, solvents, reducing agents, and stabilizers. The methods that are used to characterize nanomaterials are described. Finally, based on the available literature collection, it is shown how changing the synthesis parameters/methods affects the final characteristics of nanoparticles.

ERAP/HLA-C and KIR Genetic Profile in Couples with Recurrent Implantation Failure.

Proper embryo implantation depends on the tolerance of the maternal immune system to the fetus and its foreign paternal antigens. During implantation and early pregnancy, the dominant leukocytes in the uterus are uterine NK cells, expressing killer immunoglobulin-like receptors (KIR). KIRs recognize human leukocyte antigens (HLA-C) on the human trophoblast inherited from the father and mother. The antigenic peptides presented by the HLA are formed via their cleavage by endoplasmic reticulum aminopeptidases ERAP1 and ERAP2. The aim of this study was to assess the association of combined KIR genes and their HLA-C ligands, as well as ERAP1 and ERAP2 polymorphisms with recurrent implantation failure after in vitro fertilization (RIF). We tested 491 couples who underwent in vitro fertilization (IVF) and 322 fertile couples. Genotype CC rs27044 ERAP1 in female with a male's HLA-C1C1 or HLA-C1C2 protected from RIF (p/pcorr. = 0.005/0.044, OR = 0.343; p/pcorr. = 0.003/0.027, OR = 0.442, respectively). Genotype TT rs30187 ERAP1 in female with a male's HLA-C1C2 genotype increased the risk of RIF. Summarizing, in the combination of female ERAP1 and an HLA-C partner, the rs30187 C>T and rs27044 C>G polymorphisms play an important role in implantation failure.

Optimization of the Conditions of Solid Lipid Nanoparticles (SLN) Synthesis.

Solid lipid nanoparticles (SLNs) have been synthesized as potential drug delivery systems. They are classified as solid lipid nanocarriers that can successfully carry both hydrophilic and hydrophobic drugs. SLNs are based on a biocompatible lipid matrix that is enzymatically degraded into natural components found in the human body. Solid lipid nanoparticles are suitable for the incorporation of hydrophobic active ingredients such as curcumin. The study included the optimization of lipid nanoparticle composition, incorporation of the active compound (curcumin), a stability evaluation of the obtained nanocarriers and characterization of their lipid matrix. Through process optimization, a dispersion of solid lipid nanoparticles (solid lipid:surfactant­2:1.25 weight ratio) predisposed to the incorporation of curcumin was developed. The encapsulation efficiency of the active ingredient was determined to be 99.80%. In stability studies, it was found that the most suitable conditions for conducting high-pressure homogenization are 300 bar pressure, three cycles and a closed-loop system. This yields the required values of the physicochemical parameters (a particle size within a 200−450 nm range; a polydispersity index of <30%; and a zeta potential of about |±30 mV|). In this work, closed-loop high-pressure homogenization was used for the first time and compared to the currently preferred open-loop method.

Possibilities of Using Medicinal Plant Extracts and Salt-Containing Raw Materials from the Aral Region for Cosmetic Purposes.

The aim of this work was to study the possibility of using medicinal plants in combination with salt-containing raw materials from the Aral Sea region for cosmetic purposes. The chemical and mineralogical compositions of salts occurring in this region were studied for pharmacological and cosmetic purposes. The salt-containing raw materials were studied by X-ray diffraction (XRD), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The microflora of saline-containing raw materials and flora of the Zhaksy-Klych lake were studied. Fifty-six plant species were identified, of which 25% belong to the Asteraceae family, 32% were Poaceae, 22% were Amaranthaceae, and 21% were Tamaricaceae. Using the solid-phase microextraction (SPME) method and comprehensive two-dimensional gas chromatography−mass spectrometry, the composition of volatile compounds in such plant species as Artemisia alba L., Achilleamillifolium L., Eleagus commutate Bernh. Ex Rydb., Psoraleadrupacea Bunge, Artemisia cipa O. Vegd., Thymus vulgaris L., Morus alba L., Salvia pratensis L., Glycyrhizaglabra L., Tanacetum vulgare L., Polygonumaviculare L., Alhagipseudoalhagi Gagnebin and Peganumharmala L., chosen on the basis of their herbal components for future cosmetic products, was determined. In total, 187 different volatile compounds were found in the endemic plant species Glycyrrhizaglabra L., of which the following were dominant: 1,7-octadiene-3-, 2,6-dimethyl- with a peak area of 4.71%; caryophyllenes; bicyclo[7.2.0]4,11,11-trimethyl-8-methylene-, [1R-(1R*,4E,9S*)]­3.70%; bicyclo[2.2.1] heptane-2-1,7,7-trimethyl-,(1S)­3.46%; cyclohexanone, 5-methyl-2-(1-methylethyledene)-; 2-isopropyledene-5­2.97%; menthol; cyclohexanol, 5-methyl-2-(1-methylethyl)-; p-menthane-3-ol; menthol alcohol; and 2-isopropyl-5­2.08%. The remaining compounds were detected in amounts of less than 2.0%. Tests of seven cosmetic compositions developed on the basis of plant extracts and salt-containing raw materials revealed that three samples had a moisturizing effect. Launching the production of cosmetic products in the Aral region will not only reduce social tensions but also significantly improve the environmental situation in the region.

Cold-Pressed Pomegranate Seed Oil: Study of Punicic Acid Properties by Coupling of GC/FID and FTIR.

Over the last decades, we have witnessed an increasing interest in food-related products containing vegetable oils. These oils can be obtained either by extraction or by mechanical pressing of different parts of plants (e.g., seeds, fruit, and drupels). Producers of nutraceuticals have ceaselessly searched for unique and effective natural ingredients. The enormous success of argan oil has been followed by discoveries of other interesting vegetable oils (e.g., pomegranate oil) containing several bioactives. This work describes the pomegranate fruit extract and seed oil as a rich source of conjugated linolenic acid as a metabolite of punicic acid (PA), deriving from the omega-5 family (ω-5). Through the chemical characterization of PA, its nutritional and therapeutic properties are highlighted together with the physiological properties that encourage its use in human nutrition. We analyzed the composition of all fatty acids with beneficial properties occurring in pomegranate seed oil using gas chromatography (GC) with flame-ionization detection (FID) analysis combined with Fourier transform infrared spectroscopy (FTIR). Pomegranate seed oil mainly consists of 9,11,13-octadic-trienoic acid (18:3), corresponding to 73 wt % of the total fatty acids. Nine components were identified by GC in PSO, varying between 0.58 and 73.19 wt %. Using midinfrared (MIR) spectroscopy, we compared the composition of pomegranate seed oil with that of meadowfoam seed oil (MSO), which is also becoming increasingly popular in the food industry due to its high content of long chain fatty acids (C20-22), providing increased oil stability. From the results of FTIR and MIR spectroscopy, we found that punicic acid is unique in PSO (73.19 wt %) but not in MSO.

Diatom Biosilica Doped with Palladium(II) Chloride Nanoparticles as New Efficient Photocatalysts for Methyl Orange Degradation.

A new catalyst based on biosilica doped with palladium(II) chloride nanoparticles was prepared and tested for efficient degradation of methyl orange (MO) in water solution under UV light excitation. The obtained photocatalyst was characterized by X-ray diffraction, TEM and N2 adsorption/desorption isotherms. The photocatalytic degradation process was studied as a function of pH of the solution, temperature, UV irradiation time, and MO initial concentration. The possibilities of recycling and durability of the prepared photocatalysts were also tested. Products of photocatalytic degradation were identified by liquid chromatography-mass spectrometry analyses. The photocatalyst exhibited excellent photodegradation activity toward MO degradation under UV light irradiation. Rapid photocatalytic degradation was found to take place within one minute with an efficiency of 85% reaching over 98% after 75 min. The proposed mechanism of photodegradation is based on the assumption that both HO• and O2•- radicals, as strongly oxidizing species that can participate in the dye degradation reaction, are generated by the attacks of photons emitted from diatom biosilica (photonic scattering effect) under the influence of UV light excitation. The degradation efficiency significantly increases as the intensity of photons emitted from biosilica is enhanced by palladium(II) chloride nanoparticles immobilized on biosilica (synergetic photonic scattering effect).

Lipid Nanoparticles Loaded with Iridoid Glycosides: Development and Optimization Using Experimental Factorial Design.

Lipid nanoparticles based on multiple emulsion (W/O/W) systems are suitable for incorporating hydrophilic active substances, including iridoid glycosides. This study involved optimization of composition of lipid nanoparticles, incorporation of active compounds (aucubin and catalpol), evaluation of stability of the resulting nanocarriers, and characterization of their lipid matrix. Based on 32 factorial design, an optimized dispersion of lipid nanoparticles (solid lipid:surfactant-4.5:1.0 wt.%) was developed, predisposed for the incorporation of iridoid glycosides by emulsification-sonication method. The encapsulation efficiency of the active substances was determined at nearly 90% (aucubin) and 77% (catalpol). Regarding the stability study, room temperature was found to be the most suitable for maintaining the expected physicochemical parameter values (particle size < 100 nm; polydispersity index < 0.3; zeta potential > |± 30 mV|). Characterization of the lipid matrix confirmed the nanometer size range of the resulting carriers (below 100 nm), as well as the presence of the lipid in the stable ß' form.

Surface Studies on Glass Powders Used in Commercial Glass-Ionomer Dental Cements.

The surface properties of three commercial ionomer glass powders, i.e., Fuji IX, Kavitan Plus and Chemadent G-J-W were studied. Samples were analyzed by X-ray fluorescence spectroscopy (XRF), and the density was determined by gas pycnometry. Morphology was studied using scanning electron microscopy (SEM) and laser diffraction (LD) technique, whereas low-temperature nitrogen sorption measurements determined textural parameters like specific surface area and pore volume. Thermal transformations in the materials studied were evaluated by thermogravimetric analysis (TGA), which was carried out in an inert atmosphere between 30 °C and 900 °C. XRF showed that Fuji IX and Kavitan Plus powders were strontium-based, whereas Chemadent G-J-W powder was calcium-based. Powders all had a wide range of particle sizes under SEM and LD measurements. Specific surface areas and pore volumes were in the range 1.42-2.73 m2/g and 0.0029 to 0.0083 cm3/g, respectively, whereas densities were in the range 2.6428-2.8362 g/cm3. Thermogravimetric analysis showed that the glass powders lost mass in a series of steps, with Fuji IX powder showing the highest number, some of which are attributed to the dehydration and decomposition of the polyacrylic acid present in this powder. Mass losses were more straightforward for the other two glasses. All three powders showed distinct losses at around 780 °C and 835 °C, suggesting that similar dehydration steps occur in all these glasses. Other steps, which differed between glass powders, are attributed to variations in states of water-binding on their surfaces.

KIR and HLA-C genes in male infertility.

PURPOSE: Approximately 50% of men reporting to clinics for assisted reproduction have abnormal sperm parameters; we therefore considered whether they differ from fertile males in terms of the frequency of KIR and HLA-C genes, suggesting the involvement of NK cells and some T cells in the inflammatory reaction that can occur in the testes, vas deferens, or epididymis. METHOD: We tested a total of 1064 men: 445 of them were patients who, together with their female partners, participated in in vitro fertilization (IVF), 298 men whose female partners suffered from recurrent spontaneous abortion. Three hundred twenty-one fertile men constituted the control group. KIRs were genotyped using KIR Ready Gene kits and HLA-C by PCR-SSP methods. RESULTS: We found differences in KIR gene frequencies between men who became fathers via natural conception and men who participated in in vitro fertilization for KIR2DL2 (p/pcorr. = 0.0015/0.035, OR = 1.61), KIR2DL5 gr.2 (p/pcorr. = 0.0023/0.05, OR = 1.64), KIR2DS2 (p/pcorr. = 0.0019/0.044, OR = 1.59), and KIR2DS3 (p/pcorr. = 0.0016/0.037, OR = 1.67). KIRs in Cen AA region were significantly overrepresented in fertile males than in IVF males (p/pcorr. = 0.0076/0.03, OR = 0.67), whereas Cen AB + Cen BB frequency was higher in IVF males than in fertile males (p/pcorr. = 0.0076/0.03, OR = 1.50). We also observed a limited association in KIR-HLA-C combinations. CONCLUSION: Fertile men differ in profile of KIR genes and KIR-HLA-C combinations from men participating in IVF.

Factors Predicting Response to the Recovery-Oriented Cognitive Behavioural Workshop for Persons Diagnosed with Schizophrenia.

A recovery-oriented, cognitive behavioural workshop for service users diagnosed with schizophrenia was developed, implemented and evaluated in a pilot study. Further analysis is required regarding factors which contribute to better treatment response, as this will provide useful information for workshop adaptation. Secondary multilevel model analyses were performed to determine whether workshop and booster session attendance, as well as sociodemographic variables such as gender, age, education, and duration of illness, predicted workshop responsiveness. Results showed that completers had lower responsiveness to the workshop in terms of confidence and hope, whereas those who attended an online booster session demonstrated better responsiveness as to psychosocial functioning. Longer duration of illness and older age generally predicted lower intervention responsiveness. In conclusion, adaptations utilising more booster sessions and accommodating older participants with longer duration of illness are required, as is further workshop evaluation in a randomised controlled study.

Loading, release profile and accelerated stability assessment of monoterpenes-loaded solid lipid nanoparticles (SLN).

Glycerol monostearate solid lipid nanoparticles (SLN) were produced by hot high-pressure homogenization technique to load alpha-pinene, citral, geraniol or limonene. SLN were composed of 1 wt.% monoterpene, 4 wt.% of Imwitor® 900K as a solid lipid and 2.5 wt.% of Poloxamer188 as a surfactant. Empty SLN consisted of 5 wt.% of Imwitor® 900K and 2.5 wt.% of Poloxamer188. The mean particles size (Z-Ave) and polydispersity index (PDI) of SLN were analyzed by dynamic light scattering (DLS), while the zeta potential (ZP) of each formulation were measured by electrophoretic light scattering. LUMiSizer® was applied to calculate the velocity distribution in the centrifugal field and instability index. Drug release profile from SLN was analyzed using Franz cell diffusion cells assayed by UV-Vis spectrophotometry, whereas the gas chromatography technique was applied to determine the encapsulation parameters of volatile monoterpenes. The matrix state, polymorphism and phase behavior of SLN were studied by X-ray diffraction (XRD, low and wide angles) and differential scanning calorimetry (DSC). Selected monoterpenes were successfully loaded in glycerol monostearate SLN. A burst release profile within the first 15 min was observed for all formulations, being the modified release profile dependent on the type of monoterpene and on the encapsulation efficiency.

Duffy blood group system - the frequency of Duffy antigen polymorphisms and novel mutations in the Polish population.

Duffy blood group genes are highly polymorphic with the distribution of alleles varying between different populations and ethnic groups. The aim of this study was to genotype Duffy blood group antigens and to establish FY alleles frequency in the Polish population and screen for novel FY gene mutations. Duffy phenotype and genotype frequencies analysis was based on studies of 596 persons. All these subjects were genotyped by high-resolution melting (HRM) method. It was shown that phenotype Fy(a+b+), defined by genotypes FY*A/FY*B (33%), FY*A/FY*B298A (13%), and FY*A/FY*02W.01 (2.8%) was the most common in Polish population (˜49%), followed by Fy(a-b+), ˜29%, determined by genotypes arising from FY*B allele and all its variants. Fy(a+b-) phenotype occurred with a frequency of 21.3% and was defined by the following genotypes: FY*A/A (21%), and FY*A/02N.01 (0.3%). Among the Polish population the frequencies of FY*A, FY*B, and FY*B298A alleles were 45.7%, 36% and 15.5%, respectively. The alleles FY*B298A and FY*B combined together, represented higher frequency (51%) than FY*A. Alleles FY*02W.01 and FY*02N.01 had frequencies 2.51% and 0.25%, respectively. The distribution of Duffy genotypes in the Polish population was in accordance with Hardy-Weinberg equilibrium (p = 0.9682). Alleles in the genotypes are independent from each other (r = 0.0278, R2 = 0.00077). New mutations identified in the promoter region (c.-79T > C) and the coding region of the FY gene (c.147C > A and c.175 G > A) did not affect the Duffy antigen expression on erythrocyte. Although FY alleles frequency is known in different populations, no data for Polish population is available.

Development and Optimization of Alpha-Pinene-Loaded Solid Lipid Nanoparticles (SLN) Using Experimental Factorial Design and Dispersion Analysis.

The encapsulation of bicyclic monoterpene α-pinene into solid lipid nanoparticles (SLN) is reported using experimental factorial design, followed by high-end dispersion analyzer LUMiSizer®. This equipment allows the characterization of the α-pinene-loaded SLN instability phenomena (e.g., sedimentation, flotation or coagulation), as well as the determination of the velocity distribution in the centrifugal field and the particle size distribution. In this work, SLN were produced by hot high-pressure homogenization technique. The influence of the independent variables, surfactant and lipid ratio on the physicochemical properties of SLN, such as mean particle size (Z-Ave), polydispersity index (PDI) and zeta potential (ZP), was estimated using a 22-factorial design. The Z-Ave and PDI were analyzed by dynamic light scattering, while ZP measurements were recorded by electrophoretic light scattering. Based on the obtained results, the optimal SLN dispersion was composed of 1 wt.% of α-pinene, 4 wt.% of solid lipid (Imwitor® 900 K) and 2.5 wt.% of surfactant (Poloxamer 188), depicting 136.7 nm of Z-Ave, 0.170 of PDI and 0 mV of ZP. Furthermore, LUMISizer® has been successfully used in the stability analysis of α-pinene-loaded SLN.

Development and Evaluation of a Recovery-Oriented Cognitive Behavioural Workshop for People Diagnosed with Schizophrenia.

BACKGROUND: There is a need to develop culturally adapted interventions that support the personal recovery and real-world functioning of people diagnosed with schizophrenia. AIMS: This study reports on the development and evaluation of a culturally adapted, recovery-oriented, cognitive behavioural workshop for service users with schizophrenia. METHOD: The feasibility and acceptability were assessed, as were changes over time in personal recovery and psychosocial functioning (primary outcomes) along with psychopathology and health-related behaviours (secondary outcomes), using multi-level modelling. It was also assessed whether personal recovery predicts psychosocial functioning. RESULTS: The workshop was feasible and was received favourably. Participants improved over time regarding confidence and hope, feeling less dominated by symptoms, psychosocial functioning, and psychopathology. Personal recovery predicted decreased psychosocial difficulties. CONCLUSIONS: The workshop is a promising intervention. It shows potential in terms of both improving personal recovery as well as real-life functioning of people diagnosed with schizophrenia. Further workshop evaluation in a randomized controlled study is required.