Digitally designed and additively manufactured tooth reduction guides for porcelain laminate veneer preparations: A clinical report.

Porcelain laminate veneers are a conservative treatment to enhance esthetics, tooth shape, color, and contours. Enamel preservation during tooth preparation is essential for the long-term success of these micromechanically retained partial coverage restorations. Different methods have been described to clinically assess tooth preparation relative to definitive restorative contours. This clinical report describes a digital workflow to fabricate 3-dimensionally (3D) printed tooth reduction guides based on digital esthetic planning. These 3D-printed reduction guides help clinicians visualize and gauge tooth preparations relative to the desired restorative contours, aid in enamel preservation, and overcome some of the limitations associated with conventionally fabricated tooth reduction guides.

Polyetheretherketone (PEEK) Post and Core Restorations: A 3D Accuracy Analysis between Heat-Pressed and CAD-CAM Fabrication Methods.

PURPOSE: The purpose of this study was to evaluate the accuracy of polyetheretherketone (PEEK) based post and core restorations using heat-pressed and computer-aided design and computer-aided manufacturing (CAD-CAM) methods. MATERIALS AND METHODS: Post and core patterns (n = 10) were fabricated using an acrylic pattern resin and each pattern was scanned to generate a resin pattern standard tessellation file (STL-R) to be used as the standard control group for the 3D profilometric analysis. The STL-R files were loaded into a computer-aided manufacturing (CAM) machine and a milling disk made of a modified PEEK-based polymer with 20% ceramic fillers was milled into post and core restorations. Each original post and core resin pattern was sprued, invested and pressed using pellets made of the same PEEK material and a PEEK pressing unit. The resulting post and core restorations from the CAD-CAM and heat-pressed methods were scanned to generate STL-M (milled) and STL-P (heat-pressed) files, respectively. STL-M and STL-P files were digitally aligned and compared to STL-R files using a 3D analysis software. The 3D spatial distribution deviation was exported, and the statistical analysis was performed using the 95% CI deviation distribution from the Gaussian function subtraction. The statistical outcome for each group was merged and a 3D color-coded map was created showing the average deviation (α = 0.05). RESULTS: The heat-pressed post and core restoration showed 79 ±6% of the areas within ±50 µm while the CAD-CAM post-and-core restoration showed 66 ±9%. The CAD-CAM post and core restorations show 6 ±5% of the areas above the ideal for marginal adaptation limit threshold of 200 µm, while only 0.7 ±0.7% was found for the heat-pressed. CONCLUSIONS: The heat-pressed method to manufacture PEEK-based post and core restorations showed higher accuracy than the CAD-CAM method.

Retrospective analysis of survival rates of post-and-cores in a dental school setting.

STATEMENT OF PROBLEM: The clinical survival of different types of post-and-core systems requires assessment. PURPOSE: The purpose of this retrospective clinical study was to evaluate the clinical survival rate (CSR) of custom-fabricated cast metal and prefabricated (both metal- and fiber-reinforced composite resin post) post-and-cores as a function of patient- and restoration-related variables. MATERIAL AND METHODS: A retrospective analysis was conducted on electronic charts indicating that these patients had received some type of post-and-core between January 2003 and January 2018. A total of 754 records were included in the analysis based on the inclusion criteria. Data were analyzed by using the Kaplan-Meier and Cox proportional hazards analysis. RESULTS: Kaplan-Meier analysis demonstrated the mean survival time for each group to be 12.0 years for fiber-reinforced composite resin posts, 11.8 years for cast metal post-and-cores, and 10.2 years for prefabricated metal posts. Although the mean survival time differed by 1.8 years among groups, with prefabricated metal posts having a slightly higher risk of failure, this effect was not statistically significant (P=.067). The effect of post type also failed to reach significance when controlling for patient demographics and post position in a Cox proportional hazards analysis (P=.106). However, the Cox model did show that survival was associated with tooth position (P=.003), cement (P=.021), and type of restoration (P<.001). CONCLUSIONS: Analysis showed no evidence that post-and-core survival was significantly associated with 3 types of post-and-cores (custom-fabricated metal, prefabricated metal, and prefabricated fiber-reinforced composite resin). The percentage of root in the bone, tooth position, cement, and type of restoration, however, were significantly associated with survival.

Effect of carbamide peroxide bleaching on enamel characteristics and susceptibility to further discoloration.

STATEMENT OF PROBLEM: Whether tooth whitening alters the surface topography of enamel causing an increase in surface roughness that could increase susceptibility to restaining is unclear. PURPOSE: The purpose of this in vitro study was to evaluate whether immersing enamel in common solutions produces a color change of ΔE greater than 2; whether the highest concentration carbamide peroxide bleaching agent produces the greatest ΔE; whether bleaching increases the susceptibility to further staining by common solutions; and whether morphologic changes to the enamel surface are observed after staining and bleaching as evidenced by scanning electron microscopy (SEM) analysis and energy-dispersive X-ray spectroscopy (EDS). MATERIAL AND METHODS: Forty-five extracted human teeth were immersed in 5 solutions (wine, coffee, tea, soda, and water) for 15 days at 80°C, and the change in ΔE was assessed with a colorimeter. The teeth were bleached using different concentrations of carbamide peroxide (20%, 35%, and 44%) and ΔE was measured at different time intervals. The teeth were then restained with the same solutions. The ΔE after initial staining was compared with the ΔE after bleaching and restaining of the same teeth. SEM was performed at baseline, after staining, bleaching, and restaining to evaluate the changes in the enamel surface topography. EDS was used to determine the elemental composition of tooth surfaces after restaining. RESULTS: All liquids caused a ΔE greater than 2 after 15 days. The concentration of bleaching agent was not significantly associated with ΔE for any stain types. No significant difference was found in the rate of staining between initial staining and restaining after bleaching. However, a significant effect of time was found for the staining, where the overall ΔE increased by 0.34 for each day in the solution (P<.001). SEM images showed no major changes to enamel topography after bleaching. However, a coating was noted on teeth stained with wine and tea, which had different elemental compositions when compared with the tooth surface. CONCLUSIONS: Based on SEM observation, bleaching teeth with carbamide peroxide does not increase the susceptibility of enamel to staining and does not alter the topography of the enamel. Using higher bleaching concentrations did not increase tooth whitening as a function of time.

Qualitative Analysis of Remineralization Capabilities of Bioactive Glass (NovaMin) and Fluoride on Hydroxyapatite (HA) Discs: An In Vitro Study.

Tooth decay is a prevalent disease that initiates when the oral pH becomes acidic. Fluoride and/or bioactive glass (NovaMin) were used to regenerate/repair teeth that had been decalcified. In this present study, we investigated the effect of fluoride and/or bioactive glass (NovaMin) on remineralization of hydroxyapatite (HA) discs, which mimic the enamel surface of natural teeth. HA discs were etched with phosphoric acid and treated with one of the following toothpastes: (1) Sensodyne toothpaste with fluoride; (2) Sensodyne toothpaste with fluoride and bioactive glass (NovaMin); (3) Tom's toothpaste without fluoride or bioactive glass (NovaMin); and (4) Tom's toothpaste with bioactive glass (NovaMin). The toothpastes were applied on the etched discs for two minutes, once a day for 15 days. Scanning electron microscopy (SEM) was used to analyze surface morphologies and X-ray photoelectron spectroscopy (XPS) was used to analyze surface compositions. Tom's toothpaste with only NovaMin demonstrated the most remineralization potential compared with the other groups. In conclusion, incorporating bioactive glass (NovaMin) into toothpastes could benefit the repair and remineralization of teeth.

Titanium Corrosion in Peri-Implantitis.

Titanium (Ti) corrodes clinically in the presence of bacteria. We investigated this phenomenon as a function of Ti particles found in biopsied tissues around peri-implantitis sites and surface roughness of failed Ti implants. Tissue biopsies were surgically collected from peri-implantitis sites, processed, and embedded in resin. The resin-embedded samples were hand trimmed to the region of interest and semi-thick (500 nm) sections were collected onto coverslips. One section was toluidine blue post-stained as a reference. The remainder sections were left unstained for energy-dispersive X-ray spectroscopy (EDX) analysis. Processed samples were examined under scanning electron microscopy (SEM) and EDX. Corresponding failed implants were also removed and examined under SEM and EDX. Five out of eight biopsied samples demonstrated the presence of Ti particles in the soft tissue, suggesting the true rate among all failures was between 24.5% and 91.5% (the lower bound of a 95% confidence interval for the true rate of Ti presence). SEM analysis of failed implant bodies also indicated changes in surface morphology and appeared less detailed with decreased weight percent of Ti on the surface of the failed implants. In conclusion, Ti particles were noted in 5/8 biopsied samples. Surface morphologies were smoother in failed implants compared with the reference implant.