Multimode Hydrodynamic Instability Growth of Preimposed Isolated Defects in Ablatively Driven Foils.

The Nike KrF laser facility was used to study the evolution of isolated defects with characteristic sizes of <1 to 10s of µm in laser-accelerated plastic foils. The experimental platform permitted, for the first time, the systematic study of localized perturbation growth, which is inherently multimode, through ablative Richtmyer-Meshkov and Rayleigh-Taylor stages and into the strongly nonlinear regime. Initial target defects were relatively large amplitude, but spatially localized, and emulated tent, fill-tube, and other nonuniformities that are present in inertial confinement fusion capsules. Face-on x-ray radiography indicated initial growth of the perturbation in both depth and width, followed by its apparent closure due to oblique spike growth. Hollow jetlike profiles of laterally expanding, rising, Rayleigh-Taylor bubbles were observed on the rear surface of the target from each isolated defect. Radiation hydrodynamic simulations provided insight into the mechanism of the closure and other features of the bubble and spike evolution specific to isolated defects.

Direct drive with the argon fluoride laser as a path to high fusion gain with sub-megajoule laser energy.

Argon fluoride (ArF) is currently the shortest wavelength laser that can credibly scale to the energy and power required for high gain inertial fusion. ArF's deep ultraviolet light and capability to provide much wider bandwidth than other contemporary inertial confinement fusion (ICF) laser drivers would drastically improve the laser target coupling efficiency and enable substantially higher pressures to drive an implosion. Our radiation hydrodynamics simulations indicate gains greater than 100 are feasible with a sub-megajoule ArF driver. Our laser kinetics simulations indicate that the electron beam-pumped ArF laser can have intrinsic efficiencies of more than 16%, versus about 12% for the next most efficient krypton fluoride excimer laser. We expect at least 10% 'wall plug' efficiency for delivering ArF light to target should be achievable using solid-state pulsed power and efficient electron beam transport to the laser gas that was demonstrated with the U.S. Naval Research Laboratory's Electra facility. These advantages could enable the development of modest size and lower cost fusion power plant modules. This would drastically change the present view on inertial fusion energy as being too expensive and the power plant size too large. This article is part of a discussion meeting issue 'Prospects for high gain inertial fusion energy (part 1)'.

Demonstration of Fuel Hot-Spot Pressure in Excess of 50 Gbar for Direct-Drive, Layered Deuterium-Tritium Implosions on OMEGA.

A record fuel hot-spot pressure P_{hs}=56±7 Gbar was inferred from x-ray and nuclear diagnostics for direct-drive inertial confinement fusion cryogenic, layered deuterium-tritium implosions on the 60-beam, 30-kJ, 351-nm OMEGA Laser System. When hydrodynamically scaled to the energy of the National Ignition Facility, these implosions achieved a Lawson parameter ∼60% of the value required for ignition [A. Bose et al., Phys. Rev. E 93, 011201(R) (2016)], similar to indirect-drive implosions [R. Betti et al., Phys. Rev. Lett. 114, 255003 (2015)], and nearly half of the direct-drive ignition-threshold pressure. Relative to symmetric, one-dimensional simulations, the inferred hot-spot pressure is approximately 40% lower. Three-dimensional simulations suggest that low-mode distortion of the hot spot seeded by laser-drive nonuniformity and target-positioning error reduces target performance.

Suppression of laser nonuniformity imprinting using a thin high-z coating.

Imprinting of laser nonuniformity is a limiting factor in direct-drive inertial confinement fusion experiments, particularly when available laser smoothing is limited. A thin (∼400 Å) high-Z metal coating is found to substantially suppress laser imprint for planar targets driven by pulse shapes and intensities relevant to implosions on the National Ignition Facility while retaining low adiabat target acceleration. A hybrid of indirect and direct drive, this configuration results in initial ablation by x rays from the heated high-Z layer, creating a large standoff for perturbation smoothing.

Observation of strong oscillations of areal mass in an unsupported shock wave.

An experimental study of hydrodynamic perturbation evolution in a strong unsupported shock wave, which is immediately followed by an expansion wave, is reported. A planar solid plastic target rippled on the front side is irradiated with a 350-450 ps long laser pulse. The perturbation evolution in the target is observed using face-on monochromatic x-ray radiography during and for up to 4 ns after the laser pulse. The theoretically predicted large oscillations of the areal mass in the target are observed for the first time. Multiple phase reversals of the areal mass modulation are detected.

Mitigation of cross-beam energy transfer in inertial-confinement-fusion plasmas with enhanced laser bandwidth.

Cross-beam energy transfer (CBET) is a significant energy-loss mechanism in directly driven inertial-confinement-fusion (ICF) targets. One strategy for mitigating CBET is to increase the bandwidth of the laser light, thereby disrupting the resonant three-wave interactions that underlie this nonlinear scattering process. Here, we report on numerical simulations performed with the wave-based code lpse that show a significant reduction in CBET for bandwidths of 2-5 THz (corresponding to a normalized bandwidth of 0.2%-0.6% at a laser wavelength of 351nm) under realistic plasma conditions. Such bandwidths are beyond those available with current high-energy lasers used for ICF, but could be achieved using stimulated rotation Raman scattering in diatomic gases like nitrogen.

Implementation of focal zooming on the Nike KrF laser.

In direct drive inertial confinement laser fusion, a pellet containing D-T fuel is imploded by ablation arising from absorption of laser energy at its outer surface. For optimal coupling, the focal spot of the laser would continuously decrease to match the reduction in the pellet's diameter, thereby minimizing wasted energy. A krypton-fluoride laser (λ = 248 nm) that incorporates beam smoothing by induced spatial incoherence has the ability to produce a high quality focal profile whose diameter varies with time, a property known as focal zooming. A two-stage focal zoom has been demonstrated on the Nike laser at the Naval Research Laboratory. In the experiment, a 4.4 ns laser pulse was created in which the on-target focal spot diameter was 1.3 mm (full width at half maximum) for the first 2.4 ns and 0.28 mm for the final 2 ns. These two diameters appear in time-integrated focal plane equivalent images taken at several locations in the amplification chain. Eight of the zoomed output beams were overlapped on a 60 µm thick planar polystyrene target. Time resolved images of self-emission from the rear of the target show the separate shocks launched by the two corresponding laser focal diameters.

Basic hydrodynamics of Richtmyer-Meshkov-type growth and oscillations in the inertial confinement fusion-relevant conditions.

In inertial confinement fusion (ICF), the possibility of ignition or high energy gain is largely determined by our ability to control the Rayleigh-Taylor (RT) instability growth in the target. The exponentially amplified RT perturbation eigenmodes are formed from all sources of the target and radiation non-uniformity in a process called seeding. This process involves a variety of physical mechanisms that are somewhat similar to the classical Richtmyer-Meshkov (RM) instability (in particular, most of them are active in the absence of acceleration), but differ from it in many ways. In the last decade, radiographic diagnostic techniques have been developed that made direct observations of the RM-type effects in the ICF-relevant conditions possible. New experiments stimulated the advancement of the theory of the RM-type processes. The progress in the experimental and theoretical studies of such phenomena as ablative RM instability, re-shock of the RM-unstable interface, feedout and perturbation development associated with impulsive loading is reviewed.

Stability of a shock-decelerated ablation front.

Experimental study of a shock-decelerated ablation front is reported. A planar solid plastic target is accelerated by a laser across a vacuum gap and collides with a lower-density plastic foam layer. While the target is accelerated, a fast Rayleigh-Taylor (RT) growth of the seeded single-mode perturbation at the ablation front is observed. After the collision, the velocity of the ablation front is seen to remain constant. The reshock quenches the RT growth but does not trigger any Richtmyer-Meshkov growth at the ablation front, which is shown to be consistent with both theory and simulations.

Direct observation of mass oscillations due to ablative Richtmyer-Meshkov instability in plastic targets.

We report the first direct experimental observation of the ablative Richtmyer-Meshkov instability. It manifests itself in oscillations of areal mass that occur during the shock transit time, which are caused by the "rocket effect" or dynamic overpressure characteristic of interaction between the laser absorption zone and the ablation front. With the 4-ns-long Nike KrF laser pulse and our novel diagnostic technique (monochromatic x-ray imaging coupled to a streak camera) we were able to register a peak and a valley of the areal-mass variation before the observed onset of the Rayleigh-Taylor growth.

Direct observation of feedout-related mass oscillations in plastic targets.

"Feedout" means the transfer of mass perturbations from the rear to the front surface of a driven target. When a planar shock wave breaks out at a rippled rear surface of the target, a lateral pressure gradient drives sonic waves in a rippled rarefaction wave propagating back to the front surface. This process redistributes mass in the volume of the target, forming the feedout-generated seed for ablative Rayleigh-Taylor (RT) instability. We report the first direct experimental observation of areal-mass oscillation associated with feedout, followed by the onset of exponential RT growth.