Antimicrobial Activity of Drimanic Sesquiterpene Compounds from Drimys winteri against Multiresistant Microorganisms.

In this work, a group of ten sesquiterpene drimanes, including polygodial (1), isopolygodial (2), and drimenol (3) obtained from the bark of Drimys winteri F. and seven synthetic derivatives, were tested in vitro against a unique panel of bacteria, fungi, and oomycetes with standardized procedures against bacterial strains K. pneumoniae, S. tiphy, E. avium, and E. coli. The minimum inhibitory concentrations and bactericidal activities were evaluated using standardized protocols. Polygodial (1) was the most active compound, with MBC 8 µg/mL and MIC 16 µg/mL in E. avium; MBC 16 µg/mL and MIC 32 µg/mL in K. pneumoniae; MBC 64 µg/mL and MIC 64 µg/mL in S. typhi; and MBC 8 µg/mL and MIC 16 µg/mL and MBC 32 µg/mL and MIC 64 µg/mL in E. coli, respectively. The observed high potency could be attributed to the presence of an aldehyde group at the C8-C9 position. The antifungal activity of 1 from different microbial isolates has been evaluated. The results show that polygodial affects the growth of normal isolates and against filamentous fungi and oomycetes with MFC values ranging from 8 to 64 µg/mL. Sesquiterpene drimanes isolated from this plant have shown interesting antimicrobial properties.

Synthesis and Antiproliferative Activity of New Cyclodiprenyl Phenols against Select Cancer Cell Lines.

Six new cyclodiprenyl phenols were synthesized by direct coupling of perillyl alcohol and the appropriate phenol. Their structures were established by IR, HRMS and mainly NMR. Three human cancer cell lines-breast (MCF-7), prostate (PC-3) and colon (HT-29)-were used in antiproliferative assays, with daunorubicin and dunnione as positive controls. Results described in the article suggest that dihydroxylated compounds 2⁻4 and monohydroxylated compound 5 display selectivity against cancer cell lines, cytotoxicity, apoptosis induction, and mitochondrial membrane impairment capacity. Compound 2 was identified as the most effective of the series by displaying against all cancer cell lines a cytotoxicity close to dunnione antineoplastic agent, suggesting that the cyclodiprenyl phenols from perillyl alcohol deserve more extensive investigation of their potential medicinal applications.

Biopesticide Activity from Drimanic Compounds to Control Tomato Pathogens.

Tomato crops can be affected by several infectious diseases produced by bacteria, fungi, and oomycetes. Four phytopathogens are of special concern because of the major economic losses they generate worldwide in tomato production; Clavibacter michiganensis subsp. michiganensis and Pseudomonas syringae pv. tomato, causative agents behind two highly destructive diseases, bacterial canker and bacterial speck, respectively; fungus Fusarium oxysporum f. sp. lycopersici that causes Fusarium Wilt, which strongly affects tomato crops; and finally, Phytophthora spp., which affect both potato and tomato crops. Polygodial (1), drimenol (2), isonordrimenone (3), and nordrimenone (4) were studied against these four phytopathogenic microorganisms. Among them, compound 1, obtained from Drimys winteri Forst, and synthetic compound 4 are shown here to have potent activity. Most promisingly, the results showed that compounds 1 and 4 affect Clavibacter michiganensis growth at minimal inhibitory concentrations (MIC) values of 16 and 32 µg/mL, respectively, and high antimycotic activity against Fusarium oxysporum and Phytophthora spp. with MIC of 64 µg/mL. The results of the present study suggest novel treatment alternatives with drimane compounds against bacterial and fungal plant pathogens.

Hemi-Synthesis and Anti-Oomycete Activity of Analogues of Isocordoin.

An efficient synthesis of a series of 4'-oxyalkyl-isocordoin analogues (2-8) is reported for the first time. Their structures were confirmed by ¹H-NMR, 13C-NMR, and HRMS. Their anti-oomycete activity was evaluated by mycelium and spores inhibition assay against two selected pathogenic oomycetes strains: Saprolegnia parasitica and Saprolegnia australis. The entire series of isocordoin derivatives (except compound 7) showed high inhibitory activity against these oomycete strains. Among them, compound 2 exhibited strong activity, with minimum inhibitory concentration (MIC) and minimum oomyceticidal concentration (MOC) values of 50 µg/mL and 75 µg/mL, respectively. The results showed that 4'-oxyalkylated analogues of isocordoin could be potential anti-oomycete agents.

In Vitro Antimicrobial Activity of Embothrium coccineum Used as Traditional Medicine in Patagonia against Multiresistant Bacteria.

Embothrium coccineum J.R. Forst. & G. Forst is an evergreen tree that has been used as a folk remedy for the treatment of neuralgia, tooth pains, wound healing, and glandular conditions, as well as an antiseptic agent against bacterial infection. The antibacterial activities of sequential extracts (hexane, dichloromethane, ethyl acetate, and ethanol) from the leaves of E. coccineum were evaluated by means of the micro-dilution assay against six (Escherichia coli; Klebsiella pneumoniae; Proteus mirabilis; Pseudomonas aeruginosa; Staphylococcus aureus and Streptococcus pyogenes) multiresistant bacteria strains. Ethyl acetate extract showed the best spectra of antibacterial activity against all tested bacteria, and was analyzed by gas chromatography-mass spectrometry (GC-MS) for its composition. The results of the present work provide useful baseline information for the potential development and use of nanoparticles and/or nanofibers doped with extracts of E. coccineum in the fight against multiresistant bacteria, which would allow the validation of the traditional use of E. coccineum by native peoples of Patagonia as an antimicrobial agent in the biomedical Field.

Effect of Electrical Stimulation on PC12 Cells Cultured in Different Hydrogels: Basis for the Development of Biomaterials in Peripheral Nerve Tissue Engineering.

Extensive damage to peripheral nerves is a health problem with few therapeutic alternatives. In this context, the development of tissue engineering seeks to obtain materials that can help recreate environments conducive to cellular development and functional repair of peripheral nerves. Different hydrogels have been studied and presented as alternatives for future treatments to emulate the morphological characteristics of nerves. Along with this, other research proposes the need to incorporate electrical stimuli into treatments as agents that promote cell growth and differentiation; however, no precedent correlates the simultaneous effects of the types of hydrogel and electrical stimuli. This research evaluates the neural differentiation of PC12 cells, relating the effect of collagen, alginate, GelMA, and PEGDA hydrogels with electrical stimulation modulated in four different ways. Our results show significant correlations for different cultivation conditions. Electrical stimuli significantly increase neural differentiation for specific experimental conditions dependent on electrical frequency, not voltage. These backgrounds allow new material treatment schemes to be formulated through electrical stimulation in peripheral nerve tissue engineering.

Osteoconductive Effect of a Nanocomposite Membrane Treated with UV Radiation.

Modulation of the bio-regenerative characteristics of materials is an indispensable requirement in tissue engineering. Particularly, in bone tissue engineering, the promotion of the osteoconductive phenomenon determines the elemental property of a material be used therapeutically. In addition to the chemical qualities of the constituent materials, the three-dimensional surface structure plays a fundamental role that various methods are expected to modulate in a number of ways, one most promising of which is the use of different types of radiation. In the present manuscript, we demonstrate in a calvarial defect model, that treatment with ultraviolet irradiation allows modification of the osteoconductive characteristics in a biomaterial formed by gelatin and chitosan, together with the inclusion of hydroxyapatite and titanium oxide nanoparticles.

Antifungal Nanoformulation for Biocontrol of Tomato Root and Crown Rot Caused by Fusarium oxysporum f. sp. radicis-lycopersici.

Tomatoes (Solanum lycopersicum L.) are the most cultivated and important vegetable crop in the world. These plants can wilt during crop growth due to fusarium wilt (fusariosis), a disease that damages tomato vascular systems. The Fusarium isolated and analyzed in this work correspond to Fusarium oxysporum f. sp. radicis-lycopersici. The isolates were molecularly identified, and analysis was done on the in vitro effects of the nanoemulsions (previously obtained from extracts of Chilean medicinal plants of the genera Psoralea and Escallonia) to inhibit mycelial and conidial germination of the isolates. Subsequently, the nanoemulsions were evaluated under greenhouse conditions for preventive control of fusariosis in the root and crown, with high levels of disease control observed using the highest concentrations of these nanoemulsions, at 250 and 500 ppm.

Anatase Incorporation to Bioactive Scaffolds Based on Salmon Gelatin and Its Effects on Muscle Cell Growth.

The development of new polymer scaffolds is essential for tissue engineering and for culturing cells. The use of non-mammalian bioactive components to formulate these materials is an emerging field. In our previous work, a scaffold based on salmon gelatin was developed and tested in animal models to regenerate tissues effectively and safely. Here, the incorporation of anatase nanoparticles into this scaffold was formulated, studying the new composite structure by scanning electron microscopy, differential scanning calorimetry and dynamic mechanical analysis. The incorporation of anatase nanoparticles modified the scaffold microstructure by increasing the pore size from 208 to 239 µm and significantly changing the pore shape. The glass transition temperature changed from 46.9 to 55.8 °C, and an increase in the elastic modulus from 79.5 to 537.8 kPa was observed. The biocompatibility of the scaffolds was tested using C2C12 myoblasts, modulating their attachment and growth. The anatase nanoparticles modified the stiffness of the material, making it possible to increase the growth of myoblasts cultured onto scaffolds, which envisions their use in muscle tissue engineering.

Rheological and Structural Study of Salmon Gelatin with Controlled Molecular Weight.

This study explores the molecular structuring of salmon gelatin (SG) with controlled molecular weight produced from salmon skin, and its relationship with its thermal and rheological properties. SG was produced under different pH conditions to produce samples with well-defined high (SGH), medium (SGM), and low (SGL) molecular weight. These samples were characterized in terms of their molecular weight (MW, capillary viscometry), molecular weight distribution (electrophoresis), amino acid profile, and Raman spectroscopy. These results were correlated with thermal (gelation energy) and rheological properties. SGH presented the higher MW (173 kDa) whereas SGL showed shorter gelatin polymer chains (MW < 65 kDa). Raman spectra and gelation energy suggest that amount of helical structures in gelatin is dependent on the molecular weight, which was well reflected by the higher viscosity and G' values for SGH. Interestingly, for all the molecular weight and molecular configuration tested, SG behaved as a strong gel (tan δ < 1), despite its low viscosity and low gelation temperature (3-10 °C). Hence, the molecular structuring of SG reflected directly on the thermal and viscosity properties, but not in terms of the viscoelastic strength of gelatin produced. These results give new insights about the relationship among structural features and macromolecular properties (thermal and rheological), which is relevant to design a low viscosity biomaterial with tailored properties for specific applications.

Design of a biodegradable UV-irradiated gelatin-chitosan/nanocomposed membrane with osteogenic ability for application in bone regeneration.

Guided bone regeneration membranes are used in oral surgery to protect the site of a lesion exposed to connective tissue invasion which, in turn, prevents new bone formation. Although non-degradable and degradable materials have been applied in clinical treatments, biodegradable membranes have the advantage that they do not require a secondary surgical procedure to be removed. However, they have a very low mechanical strength. As biodegradable membranes, biomaterials based on gelatin-chitosan have gained importance in clinical applications due to their unique properties. Gelatin contains RGD-like sequences, promoting cell adhesion/migration, and it can be blended with chitosan, which allows the immobilization of nanoparticles. In this work, we designed a new gelatin-chitosan polymeric membrane which contains hydroxyapatite and titania nanoparticles as two very well-documented osteoconductive materials. UV radiation was used as a non-toxic cross-linking agent to improve the thermophysical/mechanical characteristics and to control the biodegradability of the nanocomposed membrane. The microstructure, thermophysical and mechanical properties of the UV-irradiated material were studied by scanning electron microscopy, differential scanning calorimetry and Young's modulus, respectively. The in vitro biocompatibility of the new nanocomposite was evaluated by cell adhesion and proliferation assays. The osteoconductive ability was determined by an alkaline phosphatase production assay using mouse embryonic fibroblast (MEF) cells. The results show a homogeneous material with an appropriate distribution of nanoparticles. Cross-linking by UV radiation improved the mechanical and biological performance of the membrane. The presence of two osteoconductive nanoparticles, such as titania and hydroxyapatite, increased the osteogenic potential of the gelatin-based material in vitro, which confers a biological function, in addition to functioning as a physical barrier. The material obtained herein represents a good alternative to current guided bone regeneration membranes, with high potential for use in oral/orthopaedic applications in patients.

Re-Epithelialization Appraisal of Skin Wound in a Porcine Model Using a Salmon-Gelatin Based Biomaterial as Wound Dressing.

The design of new functional materials for skin tissue engineering is an area of constant research. In this work, a novel wound-dressing biomaterial with a porous structure, previously formulated using salmon-gelatin as main component (called salmon-gelatin biomaterial (SGB)), was tested in vivo using pigs as skin wound models. Four weeks after cutaneous excision and implantation in the animals, the healing process did not show apparent symptoms of inflammation or infection. Interestingly, the temporal evolution of wound size from 100% to around 10% would indicate a faster recovery when SGB was compared against a commercial control. Histological analysis established that wounds treated with SGB presented similar healing and epithelialization profiles with respect to the commercial control. Moreover, vascularized granulation tissue and epithelialization stages were clearly identified, indicating a proliferation phase. These results showed that SGB formulation allows cell viability to be maintained. The latter foresees the development of therapeutic alternatives for skin repair based on SGB fabricated using low cost production protocols.

Isolation and identification of compounds from the resinous exudate of Escallonia illinita Presl. and their anti-oomycete activity.

The resinous exudates from Escallonia illinita by products was characterized by FT-IR, NMR and HRMS. Six compounds were isolated and identified as follows: 1,5-diphenylpent-1-en-3-one (1), 4-(5-hydroxy-3,7-dimethoxy-4-oxo-4H-chromen-2-yl)phenyl acetate (2), pinocembrin (3), kaempferol 3-O-methylether (4), (3S,5S)-(E)-1,7-diphenylhept-1-ene-3,5-diol (5) and the new diarylheptanoid (3S,5S)-(E)-5-hydroxy-1,7-diphenylhept-1-en-3-yl acetate (6). The anti-oomycete potential of the resinous exudate, as well as the main compounds, was tested in vitro against Saprolegnia parasitica and Saprolegnia australis. The resinous exudate showed a strong anti-oomycete activity. In addition, the compounds 6, 1 and 3 demonstrated significant inhibition of Saprolegnia strains development. These findings strongly suggest that E. illinita is a potential biomass that could be used as a natural anti-oomycete product.

Cold-adaptation of a methacrylamide gelatin towards the expansion of the biomaterial toolbox for specialized functionalities in tissue engineering.

Tissue regeneration is witnessing a significant surge in advanced medicine. It requires the interaction of scaffolds with different cell types for efficient tissue formation post-implantation. The presence of tissue subtypes in more complex organs demands the co-existence of different biomaterials showing different hydrolysis rate for specialized cell-dependent remodeling. To expand the available toolbox of biomaterials with sufficient mechanical strength and variable rate of enzymatic degradation, a cold-adapted methacrylamide gelatin was developed from salmon skin. Compared with mammalian methacrylamide gelatin (GelMA), hydrogels derived from salmon GelMA displayed similar mechanical properties than the former. Nevertheless, salmon gelatin and salmon GelMA-derived hydrogels presented characteristics common of cold-adaptation, such as reduced activation energy for collagenase, increased enzymatic hydrolysis turnover of hydrogels, increased interconnected polypeptides molecular mobility and lower physical gelation capability. These properties resulted in increased cell-remodeling rate in vitro and in vivo, proving the potential and biological tolerance of this mechanically adequate cold-adapted biomaterial as alternative scaffold subtypes with improved cell invasion and tissue fusion capacity.

Effects of Liposomes Contained in Thermosensitive Hydrogels as Biomaterials Useful in Neural Tissue Engineering.

Advances in the generation of suitable thermosensitive hydrogels for the delivery of cells in neural tissue engineering demonstrate a delicate relationship between physical properties and capabilities to promote cell proliferation and differentiation. To improve the properties of these materials, it is possible to add liposomes for the controlled release of bioactive elements, which in turn can affect the physical and biological properties of the hydrogels. In the present investigation, different hydrogels based on Pluronic F127 have been formulated with the incorporation of chitosan and two types of liposomes of two different sizes. The rheological and thermal properties and their relation with the neurite proliferation and growth of the PC12 cell line were evaluated. Our results show that the incorporation of liposomes modifies the properties of the hydrogels dependent on the concentration of chitosan and the lipid type in the liposomes, which directly affect the capabilities of the hydrogels to promote the viability and differentiation of PC12 cells.

Edible Scaffolds Based on Non-Mammalian Biopolymers for Myoblast Growth.

In vitro meat has recently emerged as a new concept in food biotechnology. Methods to produce in vitro meat generally involve the growth of muscle cells that are cultured on scaffolds using bioreactors. Suitable scaffold design and manufacture are critical to downstream culture and meat production. Most current scaffolds are based on mammalian-derived biomaterials, the use of which is counter to the desire to obviate mammal slaughter in artificial meat production. Consequently, most of the knowledge is related to the design and control of scaffold properties based on these mammalian-sourced materials. To address this, four different scaffold materials were formulated using non-mammalian sources, namely, salmon gelatin, alginate, and additives including gelling agents and plasticizers. The scaffolds were produced using a freeze-drying process, and the physical, mechanical, and biological properties of the scaffolds were evaluated. The most promising scaffolds were produced from salmon gelatin, alginate, agarose, and glycerol, which exhibited relatively large pore sizes (~200 µm diameter) and biocompatibility, permitting myoblast cell adhesion (~40%) and growth (~24 h duplication time). The biodegradation profiles of the scaffolds were followed, and were observed to be less than 25% after 4 weeks. The scaffolds enabled suitable myogenic response, with high cell proliferation, viability, and adequate cell distribution throughout. This system composed of non-mammalian edible scaffold material and muscle-cells is promising for the production of in vitro meat.

The application of polymerized lipid vesicles as colorimetric biosensors for real-time detection of pathogens in drinking water

The inadequate treatments given to the served waste water which are disposal to the rivers and sea coast are the major sources of faecal Microorganisms and enteric bacterial pathogens. They are among the most serious effects of water pollution bringing risks on public health. None of the current methods for detection of pathogens offer real-time on site solutions, are capable of delivering a simple visual detection signal, or can be easily instrumented as an indicator of the presence of a pathogen in water. The use of lipid vesicles incorporating Polydiacetylenes (PDAs) for the development of biosensors for “real-time” detection of pathogens has become an alternative, due to its potential for simple colorimetric response against harmful environmental effectors. However, its actual application in the field has been complicated because lipid vesicles are unable to respond specifically to environmental changes. In this paper, we report several experimental trials leading to improved response in the detection of flagellated pathogens in drinking water. Chromatic biomimetic membranes of TRCDA/DMPC and TRCDA/DMPC/Tryptophan were used in agar and liquid media, which were challenged with different amounts of Escherichia coli and Salmonella typhimurium. In addition, the effect of some divalent cations on the interaction with vesicles TRCDA/DMPC was investigated. The results indicated an improvement in the response times, both visually and quantitatively, through the use of TRIS-EDTA and proper growing conditions for E. coli and Salmonella. With the application of both conditions, it was possible by incubation at 35ºC to promote bacterial growth, therefore avoiding a dramatic effect on the colour change over control samples which may invalidate the test. Our experiments indicated that the minimum bacterial concentration necessary to produce the transition from blue to red on the vesicles as biosensor approaches 10(8) CFU/ml within 4 hrs...