Delivery of Doxorubicin by Ferric Ion-Modified Mesoporous Polydopamine Nanoparticles and Anticancer Activity against HCT-116 Cells In Vitro.

In clinical cancer research, photothermal therapy is one of the most effective ways to increase sensitivity to chemotherapy. Here, we present a simple and effective method for developing a nanotherapeutic agent for chemotherapy combined with photothermal therapy. The nanotherapeutic agent mesoporous polydopamine-Fe(III)-doxorubicin-hyaluronic acid (MPDA-Fe(III)-DOX-HA) was composed of mesoporous polydopamine modified by ferric ions and loaded with the anticancer drug doxorubicin (DOX), as well as an outer layer coating of hyaluronic acid. The pore size of the mesoporous polydopamine was larger than that of the common polydopamine nanoparticles, and the particle size of MPDA-Fe(III)-DOX-HA nanoparticles was 179 ± 19 nm. With the presence of ferric ions, the heat generation effect of the MPDA-Fe(III)-DOX-HA nanoparticles in the near-infrared light at 808 nm was enhanced. In addition, the experimental findings revealed that the active targeting of hyaluronic acid to tumor cells mitigated the toxicity of DOX on normal cells. Furthermore, under 808 nm illumination, the MPDA-Fe(III)-DOX-HA nanoparticles demonstrated potent cytotoxicity to HCT-116 cells, indicating a good anti-tumor effect in vitro. Therefore, the system developed in this work merits further investigation as a potential nanotherapeutic platform for photothermal treatment of cancer.

Identification of Novel Sphydrofuran-Derived Derivatives with Lipid-Lowering Activity from the Active Crude Extracts of Nocardiopsis sp. ZHD001.

Lipid-lowering is one of the most effective methods of prevention and treatment for cardiovascular diseases. However, most clinical lipid-lowering drugs have adverse effects and cannot achieve the desired efficacy in some complex hyperlipidemia patients, so it is of great significance to develop safe and effective novel lipid-lowering drugs. In the course of our project aimed at discovering the chemical novelty and bioactive natural products of marine-derived actinomycetes, we found that the organic crude extracts (OCEs) of Nocardiopsis sp. ZHD001 exhibited strong in vivo efficacies in reducing weight gain, lowering LDL-C, TC, and TG levels, and improving HDL-C levels in high-fat-diet-fed mice models. Chemical investigations of the active OCEs led to identifying two new sphydrofuran-derived compounds (1-2) and one known 2-methyl-4-(1-glycerol)-furan (3). Their structures were elucidated by the analysis of HRESIMS, 1D and 2D NMR spectroscopic data, and ECD calculations. Among these compounds, compound 1 represents a novel rearranged sphydrofuran-derived derivative. Bioactivity evaluations of these pure compounds showed that all the compounds exhibited significant lipid-lowering activity with lower cytotoxicity in vitro compared to simvastatin. Our results demonstrate that sphydrofuran-derived derivatives might be promising candidates for lipid-lowering drugs.

The Simultaneous Production of Two Distinct Types of Cellulose Nanocrystals.

We develop a route to prepare two types of cellulose nanocrystals (CNCs, CNC1 and CNC2) from a unique biomass resource, the fruit shell of Camellia oleifera Abel (SCOA), by integrating sulfuric acid hydrolysis and high-pressure homogenization and examine the effects of hydrolysis time on characteristics of the CNCs during the process. The CNCs exhibit different evolutions in size, morphology, surface charge, and crystallinity with increasing hydrolysis time. While both the CNCs have high crystallinity, CNC1 is of rod-like character with a relatively low aspect ratio, and CNC2 exhibits a hairy appearance with a high aspect ratio. We highlight that controlled acid hydrolysis contributes to the formation of weak spots with an increased susceptibility for homogenizing cellulosic solid residues into hairy CNCs. This is a good step toward tailoring CNC properties in a conventional and scalable approach to maximize their potential applications.

In vitro Antitumor Properties of Fucoidan-Coated, Doxorubicin-Loaded, Mesoporous Polydopamine Nanoparticles.

Chemotherapy is a common method for tumor treatment. However, the non-specific distribution of chemotherapeutic drugs causes the death of normal cells. Nanocarriers, particularly mesoporous carriers, can be modified to achieve targeted and controlled drug release. In this study, mesoporous polydopamine (MPDA) was used as a carrier for the antitumor drug doxorubicin (DOX). To enhance the release efficiency of DOX in the tumor microenvironment, which contains high concentrations of glutathione (GSH), we used N,N-bis(acryloyl)cysteamine as a cross-linking agent to encapsulate the surface of MPDA with fucoidan (FU), producing MPDA-DOX@FU-SS. MPDA-DOX@FU-SS was characterized via transmission electron microscopy, thermogravimetric analysis, and X-ray photoelectron spectroscopy (XPS), and its antitumor efficacy in vitro was investigated. The optimal conditions for the preparation of MPDA were identified as pH 12 and 20 °C, and the optimal MPDA-to-FU ratio was 2:1. The DOX release rate reached 47.77% in an in vitro solution containing 10 mM GSH at pH 5.2. When combined with photothermal therapy, MPDA-DOX@FU-SS significantly inhibited the growth of HCT-116 cells. In conclusion, MPDA-DOX@FU-SS may serve as a novel, highly effective tumor suppressor that can achieve targeted drug release in the tumor microenvironment.

Facile Preparation of Metal-Organic Framework (MIL-125)/Chitosan Beads for Adsorption of Pb(II) from Aqueous Solutions.

In this study, novel composite titanium-based metal-organic framework (MOF) beads were synthesized from titanium based metal organic framework MIL-125 and chitosan (CS) and used to remove Pb(II) from wastewater. The MIL-125-CS beads were prepared by combining the titanium-based MIL-125 MOF and chitosan using a template-free solvothermal approach under ambient conditions. The surface and elemental properties of these beads were analyzed using scanning electron microscopy, Fourier transform infrared and X-ray photoelectron spectroscopies, as well as thermal gravimetric analysis. Moreover, a series of experiments designed to determine the influences of factors such as initial Pb(II) concentration, pH, reaction time and adsorption temperature was conducted. Notably, it was found that the adsorption of Pb(II) onto the MIL-125-CS beads reached equilibrium in 180 min to a level of 407.50 mg/g at ambient temperature. In addition, kinetic and equilibrium experiments provided data that were fit to the Langmuir isotherm model and pseudo-second-order kinetics. Furthermore, reusability tests showed that MIL-125-CS retained 85% of its Pb(II)-removal capacity after five reuse cycles. All in all, we believe that the developed MIL-125-CS beads are a promising adsorbent material for the remediation of environmental water polluted by heavy metal ions.

Shear-Induced Breakup of Cellulose Nanocrystal Aggregates.

The flow properties of two kinds of cellulose nanocrystal (CNC) rods with different aspect ratios and similar zeta potentials in aqueous suspensions have been investigated. The aqueous CNC suspensions undergo a direct transition from dilute solution to colloidal glass instead of phase separation with the increasing CNC concentration. The viscosity profile shows a single shear-thinning behavior over the whole range of shear rates investigated. The shear-thinning behavior becomes stronger with the increasing CNC concentration. The viscosity is much higher for the unsonicated suspension when compared with the sonicated suspensions. The CNC rods appear arrested without alignment with an increasing shear rate from the small-angle light scattering patterns. The arrested glass state results from electric double layers surrounding the CNC rods, which give rise to long-ranged repulsive interactions. For the first time, we demonstrate that, within a narrow range of CNC concentrations, a shear-induced breakup process of the CNC aggregates exists when the shear rate is over a critical value and that the process is reversible in the sense that the aggregates can be reformed. We discuss the competition between the shear-induced breakup and the concentration-driven aggregation based on the experimental observations. The generated aggregate structure during the breakup process is characterized by a fractal dimension of 2.41. Furthermore, we determine two important variables-the breakup rate and the characteristic aggregate size-and derive analytical expressions for their evolution during the breakup process. The model predictions are in quantitative agreement with the experimental results.

Fabrication of novel surface-imprinted magnetic graphene oxide-grafted cellulose nanocrystals for selective extraction and fast adsorption of fluoroquinolones from water.

A novel adsorbent based on the surface of magnetic graphene oxide-grafted cellulose nanocrystal molecularly imprinted polymers (Mag@GO-g-CNCs@MIPs) was developed for the selective extraction and fast adsorption of fluoroquinolones (FQs) from river water samples. Cellulose nanocrystals (CNCs) were grafted onto activated graphene oxide (GO), and the surfaces of the obtained magnetic GO-g-CNC particles were molecularly imprinted with polymers using ofloxacin (OFX) as a template molecule and methacrylic acid (MAA) as a functional monomer. The resulting Mag@GO-g-CNCs@MIP material was characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, scanning electron microscopy, vibrating sample magnetometry, and X-ray photoelectron spectroscopy. Under optimum adsorption conditions, the Mag@GO-g-CNCs@MIPs with large specific surface area were easily collected and separated using an external magnetic field. Mag@GO-g-CNCs@MIPs exhibited an ultra-fast adsorption profile for FQs (5 min to achieve the maximum adsorption capacity of 74 mg/g), with imprinting factor values ranging from 1.5 to 3.1. High recognition selectivity towards nine FQs from real river water samples was established through coupling with high-performance liquid chromatography (HPLC), and the recovery of samples spiked with nine FQs was found to be in the range of 79.2-96.1%, with a detection limit ranging from 6.5 to 51 ng/g. Moreover, the data obtained adhered to the Freundlich isotherm model, and the adsorption kinetics followed a pseudo-second-order model. Finally, the Mag@GO-g-CNCs@MIPs could be regenerated and reused for seven consecutive cycles with only a 13% drop in adsorption capacity, indicating its effective application as a new, reusable, and selective adsorbent for the enrichment and separation of FQs from aqueous solutions.

Enhancement of epoxide hydrolase production by 60 Co gamma and UV irradiation mutagenesis of Aspergillus niger ZJB-09103.

An effective epoxide hydrolase (EH) production strain was mutagenized using 60 Co gamma and UV irradiation. Among positive mutant strains, the EH activity of C2-44 reached 33.7 U/g, which was 267% as much as that of the original Aspergillus niger ZJB-09103. Compared with the wild type, there were significant changes in morphology for C2-44, including the color of mycelia on the slants and the shape of conidial head. In addition, glucose and soybean cake were the optimal carbon and nitrogen source in terms of EH activity for the mutant C2-44 instead of soluble starch and peptone for the wild-type strain. The reaction time required to reach 99% enantiomeric excesses of (S)-epichlorohydrin from racemic substrate was shortened significantly by the mutant C2-44. This phenomenon was probably explained by the higher Vmax for hydrolysis of racemic epichlorohydrin by C2-44 compared with Aspergillus niger ZJB-09103.

Enantioseparation and enantioselective behavior of trichlorfon enantiomers in sediments.

Trichlorfon (TF), an organophosphorus insecticide, has been widely used in seawater aquaculture; it is easily degraded to the highly toxic insecticide, dichlorvos (DDVP). In this study, the enantioseparation of TF enantiomers, as well as their degradation behavior and product (DDVP) formation in mariculture pond sediments, was investigated. The results show that both TF enantiomers degrade into DDVP, which is the main degradation product. Furthermore, S-(+)-TF is preferentially degraded under natural conditions, suggesting that TF enantiomers degrade enantioselectively. Nevertheless, the degradation behavior of TF enantiomers is not enantiospecific under sterile conditions. The formation of DDVP and the enantiospecific degradation of TF enantiomers are attributed to the activities of microbes present in the sediments.

Analysis of flumequine enantiomers in rat plasma by UFLC-ESI-MS/MS.

In this study the analysis and confirmation of flumequine enantiomers in rat plasma by ultra-fast liquid chromatography coupled with electron spray ionization mass spectrometry (using propranolol as an internal standard [IS]) was developed and validated. Plasma samples were prepared by liquid-liquid extraction using methyl tert-butyl ether as the extraction solvent. Direct resolution of the R- and S-isomers was performed on a CHIRALCEL OJ-RH column (4.6 × 150 mm, 5 µm) using acetonitrile / 0.1% formic acid / 1 mM ammonium acetate as the mobile phase. Detection was operated by electron spray ionization in the selected ion monitoring and positive ion mode. The target ions at m/z 262.1 and m/z 260.1 were selected for the quantification of the enantiomers and IS, respectively. The linear range was 0.5-500 ng/mL. The precisions (coefficient of variation, CV%) and recoveries were 1.43-8.68 and 94.24-106.76%, respectively. The lowest quantitation limit for both enantiomers is 0.5 ng/mL, which is sensitive enough to be applied to sample analysis in other related studies.

Validation of a Chiral Liquid Chromatographic Method for the Degradation Behavior of Flumequine Enantiomers in Mariculture Pond Water.

In this work, flumequine (FLU) enantiomers were separated using a Chiralpak OD-H column, with n-hexane-ethanol (20:80, v/v) as the mobile phase at a flow rate of 0.6 mL/min. Solid phase extraction (SPE) was used for cleanup and enrichment. The limit of detection, limit of quantitation, linearity, precision, and intra/interday variation of the chiral high-performance liquid chromatography (HPLC) method were determined. The developed method was then applied to investigate the degradation behavior of FLU enantiomers in mariculture pond water samples. The results showed that the degradation of FLU enantiomers under natural, sterile, or dark conditions was not enantioselective. Chirality 28:649-655, 2016. © 2016 Wiley Periodicals, Inc.

Pharmacokinetic study of ofloxacin enantiomers in Pagrosomus major by chiral HPLC.

(S)-(-)-Ofloxacin and (R)-(+)-ofloxacin concentrations in the plasma of Pagrosomus major after drug treatment were detected by chiral high-performance liquid chromatography, and various pharmacokinetic parameters were calculated from these data. The elimination half-life of (S)-(-)-ofloxacin was significantly shorter than that of the (R)-(+) enantiomer. (S)-(-)-Ofloxacin also had a significantly lower maximum plasma concentration, area under the concentration-time curve from zero to infinity, and mean residence time than (R)-(+)-ofloxacin. However, the apparent volume of distribution and total body clearance of (S)-(-)-ofloxacin were greater than those of (R)-(+)-ofloxacin. The ratio of the (S)-(-)- to (R)-(+)-ofloxacin plasma concentration was always <1.0. Together, these data suggest that (S)-(-)-ofloxacin was preferentially excreted and (R)-(+)-ofloxacin was preferentially absorbed. Although the difference in pharmacokinetic parameters was small, the metabolic behavior of the ofloxacin enantiomers in P. major was enantioselective.

Synthesis and Characterization of Magnetic Molecularly Imprinted Polymer for the Enrichment of Ofloxacin Enantiomers in Fish Samples.

A new method for the isolation and enrichment of ofloxacin enantiomers from fish samples was developed using magnetic molecularly imprinted polymers (MMIPs). These polymers can be easily collected and rapidly separated using an external magnetic field, and also exhibit a high specific recognition for ofloxacin enantiomers. The preparation of amino-functionalized MMIPs was carried out via suspension polymerization and a ring-opening reaction using rac-ofloxacin as a template, ethylenediamine as an active group, glycidyl methacrylate and methyl methacrylate as functional monomers, divinylbenzene as a cross-linker, and Fe3O4 nanoparticles as magnetic cores. The characteristics of the MMIPs were assessed using transmission electron microscopy (TEM), X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and vibrating sample magnetometer (VSM) measurements. Furthermore, the adsorption properties were determined using Langmuir and Freundlich isotherm models. The conditions for use of these MMIPs as magnetic solid-phase extraction (MSPE) sorbents, including pH, adsorption time, desorption time, and eluent, were investigated in detail. An extraction method using MMIPs coupled with high performance liquid chromatography (HPLC) was developed for the determination of ofloxacin enantiomers in fish samples. The limits of quantitation (LOQ) for the developed method were 0.059 and 0.067 µg∙mL(-1) for levofloxacin and dextrofloxacin, respectively. The recovery of ofloxacin enantiomers ranged from 79.2% ± 5.6% to 84.4% ± 4.6% and ofloxacin enantiomers had good linear relationships within the concentration range of 0.25-5.0 µg∙mL(-1) (R² > 0.999). The obtained results demonstrate that MSPE-HPLC is a promising approach for preconcentration, purification, and simultaneous separation of ofloxacin enantiomers in biomatrix samples.

Polydopamine-Modified Copper Coordination Mesoporous Silica Nanoparticles Loaded with Disulfiram for Synergistic Chemo-Photothermal Therapy.

Disulfiram (DSF) degrades to diethyldithiocarbamate (DTC) in vivo and coordinates with copper ions to form CuET, which has higher antitumor activity. In this study, DSF@CuMSN-PDA nanoparticles were prepared using mesoporous silica with copper ions, DSF as a carrier, and polydopamine (PDA) as a gate system. The nanoparticles selectively released CuET into tumor tissue by taking advantage of the tumor microenvironment, where PDA could be degraded. The release ratio reached 79.17% at pH 5.0, indicating pH-responsive drug release from the nanoparticles. The PDA-gated system provided the nanoparticles with unique photothermal conversion performance and significantly improved antitumor efficiency. In vivo, antitumor experiments showed that the designed DSF@CuMSN-PDA nanoparticles combined with near-infrared light (808 nm, 1 W/cm2) irradiation effectively inhibited tumor growth in HCT116 cells by harnessing the combined potential of chemotherapy and photothermal therapy; a synergistic effect was achieved. Taken together, these results suggest that the designed DSF@CuMSN-PDA construct can be employed as a promising candidate for combined chemo-photothermal therapy.

pH/glutathione dual-responsive copper sulfide-coated organic mesoporous silica for synergistic chemo-photothermal therapy.

Nanodrug delivery systems (NDSs), such as mesoporous silica, have been widely studied because of their high specific surface area, high loading rate, and easy modification; however, they are not easily metabolized and excreted by the human body and may be potentially harmful. Hence, we aimed to examine the synergistic anti-tumor effects of ex vivo chemo-photothermal therapy to develop a rational and highly biocompatible treatment protocol for tumors. We constructed a biodegradable NDS using organic mesoporous silica with a tetrasulfide bond structure, copper sulfide core, and folic acid-modified surface (CuS@DMONs-FA-DOX-PEG) to target a tumor site, dissociate, and release the drug. The degradation ability, photothermal conversion ability, hemocompatibility, and in vitro and in vivo anti-tumor effects of the CuS@DMONs-FA-DOX-PEG nanoparticles were evaluated. Our findings revealed that the nanoparticles encapsulated in copper sulfide exhibited significant photothermal activity and optimal photothermal conversion rate. Further, the drug was accurately delivered and released into the target tumor cells, annihilating them. This study demonstrated the successful preparation, safety, and synergistic anti-tumor effects of chemo-photothermal therapeutic nanomaterials.

Disulfiram-loaded CuO2 nanocarriers for enhanced synergistic chemodynamic chemotherapy.

Disulfiram (DSF) metabolites exhibit antitumor properties when bound to Cu2+. This combination also promotes the generation of reactive oxygen species (ROS), ultimately leading to tumor cell death. In this study, CuO2 served as a carrier for DSF, forming a dual-drug delivery system with Cu2+ and DSF encapsulated in polydopamine (PDA). In the final delivery system, CuO2 (DSF-CuO2@PDA) was hydrolyzed at the tumor site, releasing both Cu2+ and H2O2. Cu2+ reacts with DSF metabolites to form Bis(diethyldithiocarbamate)-Cu (CuET), which triggers a Fenton-like reaction that generates ROS. Chemotherapy and chemodynamic therapy exhibited significant tumor-suppressive capabilities, with an inhibition rate of 61 %. In addition, the DSF-CuO2@PDA complex demonstrated superlative tumor-targeting ability and biocompatibility.

In situ generation of copper(â ¡)/diethyldithiocarbamate complex through tannic acid/copper(â ¡) network coated hollow mesoporous silica for enhanced cancer chemodynamic therapy.

The Cu2+ complex formed by the coordination of disulfiram (DSF) metabolite diethyldithiocarbamate (DTC), Cu(DTC)2, can effectively inhibit tumor growth. However, insufficient Cu2+ levels in the tumor microenvironment can impact tumor-suppressive effects of DTC. In this study, we proposed a Cu2+ and DSF tumor microenvironment-targeted delivery system. This system utilizes hollow mesoporous silica (HMSN) as a carrier, after loading with DSF, encases it using a complex of tannic acid (TA) and Cu2+ on the outer layer. In the slightly acidic tumor microenvironment, TA/Cu undergoes hydrolysis, releasing Cu2+ and DSF, which further form Cu(DTC)2 to inhibit tumor growth. Additionally, Cu2+ can engage in a Fenton-like reaction with H2O2 in the tumor microenvironment to form OH, therefore, chemodynamic therapy (CDT) and Cu(DTC)2 are used in combination for tumor therapy. In vivo tumor treatment results demonstrated that AHD@TA/Cu could accumulate at the tumor site, achieving a tumor inhibition rate of up to 77.6 %. This study offers a novel approach, circumventing the use of traditional chemotherapy drugs, and provides valuable insights into the development of in situ tumor drug therapies.

Dextran-Based Antibacterial Hydrogel Dressings for Accelerating Infected Wound Healing by Reducing Inflammation Levels.

Infected wounds pose challenges such as exudate management, bacterial infections, and persistent inflammation, making them a significant challenge for modern dressings. To address these issues in infected wounds more effectively, aerogel-hydrogel biphase gels based on dextran are developed. The gel introduced in this study exhibits antibacterial and anti-inflammatory properties in the process of wound therapy, contributing to accelerated wound healing. The aerogel phase exhibits exceptional water-absorption capabilities, rapidly soaking up exudate from infected wound, thereby fostering a clean and hygienic wound healing microenvironment. Concurrently, the aerogel phase is enriched with hydrogen sulfide donors. Following water absorption and the formation of the hydrogel phase, it enables the sustained release of hydrogen sulfide around the wound sites. The experiments confirm that hydrogen sulfide, by promoting M2 macrophage differentiation and reducing the levels of inflammatory factors, effectively diminishes local inflammation levels at the wound site. Furthermore, the sodium copper chlorophyllin component within the hydrogel phase demonstrates effective antibacterial properties through photodynamic antimicrobial therapy, providing a viable solution to wound infection challenges.

Chitosan nanoparticles attenuate hydrogen peroxide-induced stress injury in mouse macrophage RAW264.7 cells.

This study was carried out to investigate the protective effects of chitosan nanoparticles (CNP) against hydrogen peroxide (H2O2)-induced oxidative damage in murine macrophages RAW264.7 cells. After 24 h pre-incubation with CNP (25-200 µg/mL) and chitosan (CS) (50-200 µg/mL, as controls), the viability loss in RAW264.7 cells induced by H2O2 (500 µM) for 12 h was markedly restored in a concentration-dependent manner as measured by MTT assay (P < 0.05) and decreased in cellular LDH release (P < 0.05). Moreover, CNP also exerted preventive effects on suppressing the production of lipid peroxidation such as malondialdehyde (MDA) (P < 0.05), restoring activities of endogenous antioxidant including superoxide dismutase (SOD), and glutathione peroxidase (GSH-Px) (P < 0.05), along with increasing total antioxidant capacity (T-AOC) (P < 0.05). In addition, pre-incubation of CNP with RAW264.7 cells for 24 h resulted in the increase of the gene expression level of endogenous antioxidant enzymes, such as MnSOD and GSH-Px (P < 0.05). At the same concentration, CNP significantly decreased LDH release and MDA (P < 0.05) as well as increased MnSOD, GSH-Px, and T-AOC activities (P < 0.05) as compared to CS. Taken together, our findings suggest that CNP can more effectively protect RAW264.7 cells against oxidative stress by H2O2 as compared to CS, which might be used as a potential natural compound-based antioxidant in the functional food and pharmaceutical industries.

A quaternized chitosan and carboxylated cellulose nanofiber-based sponge with a microchannel structure for rapid hemostasis and wound healing.

A hemostatic sponge should perform rapid hemostasis and exhibit antibacterial properties, whilst being non-toxic, breathable, and degradable. This study prepared a hemostatic sponge (CQTC) with microchannels, specifically a microchannel structure based on quaternized chitosan (QCS) and carboxylated cellulose nanofibers (CCNF) obtained by using tannic acid and Cu2+ complex (crosslinking agent). The sponge had low density and high porosity, while being degradable. The combination of microchannels and three-dimensional porous structure of CQTC leads to excellent liquid absorption and hemostasis ability, based on a liquid absorption rate test and in vitro hemostasis experiment. In addition, CQTC exhibited excellent antibacterial activity against both gram-negative and gram-positive bacteria, and it promoted wound healing. In conclusion, this porous and microchannel hemostatic sponge has broad application prospects as a clinical wound hemostatic material.