Construction and Evaluation of a Bio-Engineered Pump to Enable Subpulmonary Support of the Fontan Circulation: A Proof-of-Concept Study.

Our objective was to create a bio-engineered pump (BEP) for subpulmonary Fontan circulation support capable of luminal endothelialization and producing a 2-6 mmHg pressure gradient across the device without flow obstruction. To accomplish this, porcine urinary bladder submucosa was decellularized to produce a urinary bladder matrix (UBM) which produced acellular sheets of UBM. The UBM was cultured with human umbilical vein endothelial cells producing a nearly confluent monolayer of cells with the maintenance of typical histologic features demonstrating UBM to be a suitable substrate for endothelial cells. A lamination process created bilayer UBM sheets which were formed into biologic reservoirs. BEPs were constructed by securing the biologic reservoir between inlet and outlet valves and compressed with a polyurethane balloon. BEP function was evaluated in a simple flow loop representative of a modified subpulmonary Fontan circulation. A BEP with a 92-mL biologic reservoir operating at 60 cycles per minute produced pulsatile downstream flows without flow obstruction and generated a favorable pressure gradient across the device, maintaining upstream pressure of 6 mm Hg and producing downstream pressure of 13 mm Hg. The BEP represents potential long-term assistance for the Fontan circulation to relieve venous hypertension, provide pulsatile pulmonary blood flow and maintain cardiac preload.

Hybrid MoS2/h-BN Nanofillers As Synergic Heat Dissipation and Reinforcement Additives in Epoxy Nanocomposites.

Two-dimensional (2D) nanomaterials as molybdenum disulfide (MoS2), hexagonal boron nitride (h-BN), and their hybrid (MoS2/h-BN) were employed as fillers to improve the physical properties of epoxy composites. Nanocomposites were produced in different concentrations and studied in their microstructure, mechanical and thermal properties. The hybrid 2D mixture imparted efficient reinforcement to the epoxy leading to increases of up to 95% in tensile strength, 60% in ultimate strain, and 58% in Young's modulus. Moreover, an enhancement of 203% in thermal conductivity was achieved for the hybrid composite as compared to the pure polymer. The incorporation of MoS2/h-BN mixture nanofillers in epoxy resulted in nanocomposites with multifunctional characteristics for applications that require high mechanical and thermal performance.

Bacteria as Bio-Template for 3D Carbon Nanotube Architectures.

It is one of the most important needs to develop renewable, scalable and multifunctional methods for the fabrication of 3D carbon architectures. Even though a lot of methods have been developed to create porous and mechanically stable 3D scaffolds, the fabrication and control over the synthesis of such architectures still remain a challenge. Here, we used Magnetospirillum magneticum (AMB-1) bacteria as a bio-template to fabricate light-weight 3D solid structure of carbon nanotubes (CNTs) with interconnected porosity. The resulting porous scaffold showed good mechanical stability and large surface area because of the excellent pore interconnection and high porosity. Steered molecular dynamics simulations were used to quantify the interactions between nanotubes and AMB-1 via the cell surface protein MSP-1 and flagellin. The 3D CNTs-AMB1 nanocomposite scaffold is further demonstrated as a potential substrate for electrodes in supercapacitor applications.

Influence of Nanoclay Dispersion Methods on the Mechanical Behavior of E-Glass/Epoxy Nanocomposites.

Common dispersion methods such as ultrasonic sonication, planetary centrifugal mixing and magnetic dispersion have been used extensively to achieve moderate exfoliation of nanoparticles in polymer matrix. In this study, the effect of adding three roll milling to these three dispersion methods for nanoclay dispersion into epoxy matrix was investigated. A combination of each of these mixing methods with three roll milling showed varying results relative to the unmodified polymer laminate. A significant exfoliation of the nanoparticles in the polymer structure was obtained by dispersing the nanoclay combining three roll milling to magnetic and planetary centrifugal mixing methods. This exfoliation promoted a stronger interfacial bond between the matrix and the fiber, which increased the final properties of the E-glass/epoxy nanocomposite. However, a combination of ultrasound sonication and three roll milling on the other hand, resulted in poor clay exfoliation; the sonication process degraded the polymer network, which adversely affected the nanocomposite final properties relative to the unmodified E-glass/epoxy polymer.