Oxidative Cyclodehydrogenation of Trinaphthylamine: Selective Formation of a Nitrogen-Centered Polycyclic π-System Comprising 5- and 7-Membered Rings.

We describe a new type of nitrogen-centered polycyclic scaffold comprising a unique combination of 5-, 6-, and 7-membered rings. The compound is accessible through an intramolecular oxidative cyclodehydrogenation of tri(1-naphthyl)amine. To the best of our knowledge this is the very first example of a direct 3-fold cyclization of a triarylamine under oxidative conditions. The unusual ring fusion motif is confirmed by X-ray crystallography and the impact of cyclization on the electronic and photophysical properties is investigated both experimentally and theoretically based on density-functional theory (DFT) calculations. The formation of the unexpected product is rationalized by detailed mechanistic studies on the DFT level. The results suggest the cyclization to occur under kinetic control via a dicationic mechanism.

Thiolate-Protected Metal Nanoclusters: Recent Development in Synthesis, Understanding of Reaction, and Application in Energy and Environmental Field.

Metal nanoclusters (NCs), which are composed of about 250 or fewer metal atoms, possess great potential as novel functional materials. Fundamental research on metal NCs gradually started in the 1960s, and since 2000, thiolate (SR)-protected metal NCs have been the main metal NCs actively studied. The precise and systematic isolation of SR-protected metal NCs has been achieved in 2005. Since then, research on SR-protected metal NCs for both basic science and practical application has rapidly expanded. This review describes this recent progress in the field of SR-protected metal NCs in three areas: synthesis, understanding, and application. Specifically, the recent study of alloy NCs and connected structures composed of NCs is highlighted in the "synthesis" section, recent knowledge on the reactivity of NCs in solution is highlighted in the "understanding" section, and the applications of NCs in the energy and environmental field are highlighted in the "application" section. This review provides insight on the current state of research on SR-protected metal NCs and discusses the challenges to be overcome for further development in this field as well as the possibilities that these materials can contribute to solving the problems facing modern society.

Activation of Water-Splitting Photocatalysts by Loading with Ultrafine Rh-Cr Mixed-Oxide Cocatalyst Nanoparticles.

The activity of many water-splitting photocatalysts could be improved by the use of RhIII -CrIII mixed oxide (Rh2-x Crx O3 ) particles as cocatalysts. Although further improvement of water-splitting activity could be achieved if the size of the Rh2-x Crx O3 particles was decreased further, it is difficult to load ultrafine (<2 nm) Rh2-x Crx O3 particles onto a photocatalyst by using conventional loading methods. In this study, a new loading method was successfully established and was used to load Rh2-x Crx O3 particles with a size of approximately 1.3 nm and a narrow size distribution onto a BaLa4 Ti4 O15 photocatalyst. The obtained photocatalyst exhibited an apparent quantum yield of 16 %, which is the highest achieved for BaLa4 Ti4 O15 to date. Thus, the developed loading technique of Rh2-x Crx O3 particles is extremely effective at improving the activity of the water-splitting photocatalyst BaLa4 Ti4 O15 . This method is expected to be extended to other advanced water-splitting photocatalysts to achieve higher quantum yields.

Inhibitory effects of lysophosphatidic acid receptor-5 on cellular functions of sarcoma cells.

Lysophosphatidic acid (LPA) is a bioactive lipid that interacts with G protein-coupled LPA receptors (LPA receptor-1 (LPA1) to LPA6). Here, we investigated the effects of LPA signaling via LPA5 on cellular functions of sarcoma cells by generating Lpar5 overexpressing and Lpar5 knockdown cells from rat osteosarcoma and malignant fibrous histiocytoma cells, respectively. The cell motility activity of Lpar5 overexpressing cells was significantly lower, while Lpar5 knockdown cells showed high cell motility, compared with respective controls. Gelatin zymography showed that LPA5 suppressed the activation of matrix metalloproteinase-2. LPA5 also inhibited the cell motility activity of endothelial cells, correlating with the expression levels of vascular endothelial growth factor genes. These results suggest that LPA signaling via LPA5 negatively regulates the cellular functions of rat sarcoma cells.

Reduction and Diffusion of Cr-Oxide Layers into P25, BaLa4Ti4O15, and Al:SrTiO3 Particles upon High-Temperature Annealing.

Chromium oxide (Cr2O3) is a beneficial metal oxide used to prevent the backward reaction in photocatalytic water splitting. The present work investigates the stability, oxidation state, and the bulk and surface electronic structure of Cr-oxide photodeposited onto P25, BaLa4Ti4O15, and Al:SrTiO3 particles as a function of the annealing process. The oxidation state of the Cr-oxide layer as deposited is found to be Cr2O3 on the surface of P25 and Al:SrTiO3 particles and Cr(OH)3 on BaLa4Ti4O15. After annealing at 600 °C, for P25 (a mixture of rutile and anatase TiO2), the Cr2O3 layer diffuses into the anatase phase but remains at the surface of the rutile phase. For BaLa4Ti4O15, Cr(OH)3 converts to Cr2O3 upon annealing and diffuses slightly into the particles. However, for Al:SrTiO3, the Cr2O3 remains stable at the surface of the particles. The diffusion here is due to the strong metal-support interaction effect. In addition, some of the Cr2O3 on the P25, BaLa4Ti4O15, and Al:SrTiO3 particles is reduced to metallic Cr after annealing. The effect of Cr2O3 formation and diffusion into the bulk on the surface and bulk band gaps is investigated with electronic spectroscopy, electron diffraction, DRS, and high-resolution imaging. The implications of the stability and diffusion of Cr2O3 for photocatalytic water splitting are discussed.

From 2,5-Diformyl-1,4-dihydropyrrolo[3,2-b]pyrroles to Quadrupolar, Centrosymmetric Two-Photon-Absorbing A-D-A Dyes.

An original approach has been developed for the insertion of formyl substituents at positions 2 and 5 of 1,4-dihydropyrrolo[3,2-b]pyrroles by conversion of thiazol-2-yl substituents. The synthetic utility of these formyl groups was investigated, and a series of centrosymmetric A-π-D-π-A frameworks were constructed. The two-photon absorption of the quadrupolar pyrrolo[3,2-b]pyrrole possessing two dicyanovinylidene flanking groups is attributed to an S0 → (S1) → S4 transition which has a large TPA cross-section (1300 GM) for a molecule of this size.

Creation of active water-splitting photocatalysts by controlling cocatalysts using atomically precise metal nanoclusters.

With global warming and the depletion of fossil resources, our fossil-fuel-dependent society is expected to shift to one that instead uses hydrogen (H2) as clean and renewable energy. Water-splitting photocatalysts can produce H2 from water using sunlight, which are almost infinite on the earth. However, further improvements are indispensable to enable their practical application. To improve the efficiency of the photocatalytic water-splitting reaction, in addition to improving the semiconductor photocatalyst, it is extremely effective to improve the cocatalysts (loaded metal nanoclusters, NCs) that enable the reaction to proceed on the photocatalysts. We have thus attempted to strictly control metal NCs on photocatalysts by introducing the precise-control techniques of metal NCs established in the metal NC field into research on water-splitting photocatalysts. Specifically, the cocatalysts on the photocatalysts were controlled by adsorbing atomically precise metal NCs on the photocatalysts and then removing the protective ligands by calcination. This work has led to several findings on the electronic/geometrical structures of the loaded metal NCs, the correlation between the types of loaded metal NCs and the water-splitting activity, and the methods for producing high water-splitting activity. We expect that the obtained knowledge will lead to clear design guidelines for the creation of practical water-splitting photocatalysts and thereby contribute to the construction of a hydrogen-energy society.

Quadrupolar Dyes Based on Highly Polarized Coumarins.

The fluorescence and other photophysical parameters of highly polarized, quadrupolar bis-coumarins possessing an electron-rich pyrrolo[3,2-b]pyrrole bridging unit are highly dependent on the linking position between both chromophores. Delocalization of the LUMO on the entire π-system results in intense emission and strong two-photon absorption.

One-, Two-, and Three-Dimensional Self-Assembly of Atomically Precise Metal Nanoclusters.

Metal nanoclusters (NCs), which consist of several, to about one hundred, metal atoms, have attracted much attention as functional nanomaterials for use in nanotechnology. Because of their fine particle size, metal NCs exhibit physical/chemical properties and functions different from those of the corresponding bulk metal. In recent years, many techniques to precisely synthesize metal NCs have been developed. However, to apply these metal NCs in devices and as next-generation materials, it is necessary to assemble metal NCs to a size that is easy to handle. Recently, multiple techniques have been developed to form one-, two-, and three-dimensional connected structures (CSs) of metal NCs through self-assembly. Further progress of these techniques will promote the development of nanomaterials that take advantage of the characteristics of metal NCs. This review summarizes previous research on the CSs of metal NCs. We hope that this review will allow readers to obtain a general understanding of the formation and functions of CSs and that the obtained knowledge will help to establish clear design guidelines for fabricating new CSs with desired functions in the future.

Preparation of a copper ion complex of sterically congested diphenyldiazomethanes having a pyridine ligand and characterization of their photoproducts.

To show that persistent high-spin polycarbenes can be realized by utilizing hetero spin systems, two diphenyldiazomethanes having pyridyl groups, i.e., bis{4-(4-pyridyl)-2,6-dimethylphenyl}diazomethane (4,4'-DPy-1-N(2)) and {2,4-di(4-pyridyl)-6-bromophenyl}(2,6-dimethyl-4-tert-butylphenyl)diazomethane (2,4-DPy-1-N(2)), were prepared. Triplet carbenes, 4,4'-DPy-1 and 2,4-DPy-1, generated by photolysis of the corresponding diazomethanes were characterized by spectroscopic means (ESR and UV/vis in matrix at low temperatures and laser flash photolysis in solution at room temperature). The results showed that they were fairly persistent. Magnetic properties of the photoproducts from a 1:1 complex between DPy-1-N(2) and Cu(hfac)(2) (hfac = hexafluoroacetylacetonate) were characterized by ESR and a superconducting quantum interference device (SQUID) magneto/susceptometer. The field dependences of magnetization for the complexes, expressed by using M versus H/T plots, were analyzed in terms of the Brillouin function to be S = 6.80 (F = 0.60) for the 1:1 complex of 4,4'-DPy-1 and Cu(hfac)(2) and S = 3.71 (F = 0.73) for the 1:1 complex of 2,4-DPy-1 and Cu(hfac)(2) at 2.0 K. Thus, it has been demonstrated that a high-spin species is actually generated in the photoproducts and that the complexed carbenes showed significant stability.