Towards Antibiotic Synthesis in Continuous-Flow Processes.

Continuous-flow chemistry has become a mainstream process and a notable trend among emerging technologies for drug synthesis. It is routinely used in academic and industrial laboratories to generate a wide variety of molecules and building blocks. The advantages it provides, in terms of safety, speed, cost efficiency and small-equipment footprint compared to analog batch processes, have been known for some time. What has become even more important in recent years is its compliance with the quality objectives that are required by drug-development protocols that integrate inline analysis and purification tools. There can be no doubt that worldwide government agencies have strongly encouraged the study and implementation of this innovative, sustainable and environmentally friendly technology. In this brief review, we list and evaluate the development and applications of continuous-flow processes for antibiotic synthesis. This work spans the period of 2012-2022 and highlights the main cases in which either active ingredients or their intermediates were produced under continuous flow. We hope that this manuscript will provide an overview of the field and a starting point for a deeper understanding of the impact of flow chemistry on the broad panorama of antibiotic synthesis.

Highlights on Recent Developments of Heterogeneous and Homogeneous Photocatalysis.

Photocatalysis emerged in the last decades as a versatile technology, whose applications range from environmental remediation to hydrogen production, energy harvesting, and organic synthesis, with exciting examples also in medicine, electronics, and advanced functional materials [...].

The influence of nitrogen doping on the electronic structure of the valence and conduction band in TiO2.

X-ray emission spectroscopy (XES) and X-ray absorption spectroscopy (XAS) provide a unique opportunity to probe both the highest occupied and the lowest unoccupied states in matter with bulk sensitivity. In this work, a combination of valence-to-core XES and pre-edge XAS techniques are used to determine changes induced in the electronic structure of titanium dioxide doped with nitrogen atoms. Based on the experimental data it is shown that N-doping leads to incorporation of the p-states on the occupied electronic site. For the conduction band, a decrease in population of the lowest unoccupied d-localized orbitals with respect to the d-delocalized orbitals is observed. As confirmed by theoretical calculations, the N p-states in TiO2 structure are characterized by higher binding energy than the O p-states which gives a smaller value of the band-gap energy for the doped material.

Identification of Sulfonated and Hydroxy-Sulfonated Polychlorinated Biphenyl (PCB) Metabolites in Soil: New Classes of Intermediate Products of PCB Degradation?

In this paper we describe the identification of two classes of contaminants: sulfonated-PCBs and hydroxy-sulfonated-PCBs. This is the first published report of the detection of these chemicals in soil. They were found, along with hydroxy-PCBs, in soil samples coming from a site historically contaminated by the industrial production of PCBs and in background soils. Sulfonated-PCB levels were approximately 0.4-0.8% of the native PCB levels in soils and about twice the levels of hydroxy-sulfonated-PCBs and hydroxy-PCBs. The identification of sulfonated-PCBs was confirmed by the chemical synthesis of reference standards, obtained through the sulfonation of an industrial mixture of PCBs. We then reviewed the literature to investigate for the potential agents responsible for the sulfonation. Furthermore, we predicted their physicochemical properties and indicate that, given the low pKa of sulfonated- and hydroxy-sulfonated-PCBs, they possess negligible volatility, supporting the case for in situ formation from PCBs. This study shows the need of understanding their origin, their role in the degradation path of PCBs, and their fate, as well as their (still unknown) toxicological and ecotoxicological properties.

Synthesis and Spectroscopic Characterization of 2-(het)Aryl Perimidine Derivatives with Enhanced Fluorescence Quantum Yields.

Perimidines are a particularly versatile family of heterocyclic compounds, whose properties are exploited in several applications ranging from industrial to medicinal chemistry. The molecular structure of perimidine incorporates a well-known efficient fluorophore, i.e.: 1,8-diaminonaphthalene. The high fluorescence quantum yield shared by most naphthalene derivatives, has enabled their use as stains for bio-imaging and biophysical characterizations. However, fluorescence is dramatically depressed in perimidine as well as in the few of its derivatives analysed so far to this respect. The use of perimidine-like molecules in life sciences might be notably fostered by enhancement of their fluorescence emission. Even more excitingly, the concomitance of both biologically active moieties and a fluorophore in the same molecular structure virtually discloses application of perimidines as drug compounds in state-of-art theranostics protocols. However, somewhat surprisingly, relatively few attempts were made until now in the direction of increasing the performances of perimidines as fluorescent dyes. In this work we present the synthesis and spectroscopic characterization of four perimidine derivatives designed to this aim, two of which result to be endowed with fluorescence quantum yields comparable to 1,8-diaminonaphthalene. A rationalization for such improved behaviour has been attempted employing TD-DFT calculations, which have unravelled the interrelations among bond structure, lone pair conjugation, local electron density changes and fluorescence quantum yield.

A novel synthesis of N-hydroxy-3-aroylindoles and 3-aroylindoles.

A straightforward indole synthesis via annulation of C-nitrosoaromatics with conjugated terminal alkynones was realised achieving a simple, highly regioselective, atom- and step economical access to 3-aroylindoles in moderate to good yields. Further functionalizations of indole scaffolds were investigated and an easy way to JWH-018, a synthetic cannabinoid, was achieved.

Childhood Traumatic Experiences and Dissociative Phenomena in Eating Disorders: Level and Association with the Severity of Binge Eating Symptoms.

The aim of the current study is to evaluate the presence of childhood trauma, psychoform, and somatoform dissociation in eating disorders (ED). Eighty-six ED outpatients participated in this study, 20 of them were diagnosed with restrictive anorexia (AN-R), 10 of them with anorexia nervosa binge-purging subtypes (AN-B), 25 with bulimia nervosa (BN), and 31 with binge eating disorder (BED). They were matched by sex and age with a control group consisting of 86 healthy subjects (HC). Traumatic experiences were assessed by means of the Childhood Trauma Questionnaire (CTQ), psychological, and somatoform dissociation, respectively, by means of the Dissociative Experience Scale (DES-II) and Somatoform Dissociation Questionnaire (SDQ-20), and binge eating symptoms by means of Binge Eating Scale (BES). ED subjects showed higher levels of childhood trauma, and both psychoform and somatoform dissociation compared to HC subjects. ED patients showed higher levels of childhood trauma compared to the HC group. No significant differences were shown between ED subgroups with respect to all forms of childhood trauma. BN and AN-B subgroups showed higher levels of both psychological and somatoform dissociation. Dissociation and childhood trauma predicted the severity of binge eating symptoms. Our results confirm previous studies in the same field.

Nanoflower-Like Bi2 WO6 Encapsulated in ORMOSIL as a Novel Photocatalytic Antifouling and Foul-Release Coating.

Herein, the first multi-purpose antifouling and foul-release photocatalytic coating based on ORMOSIL thin films doped with nanoflower-like Bi2 WO6 is described. Irradiation with visible light of the new films immersed in water produces significant amounts of H2 O2 by photocatalytic oxidation of water, and allows the degradation of (bio)organic pollutants at the outer surface of the xerogel film.

Integrated Nano- and Macroscale Investigation of Photoinduced Hydrophilicity in TiO2 Thin Films.

The hydrophilicity of titanium dioxide has been investigated for films, deposited on glass by e-beam evaporation, being exposed to UV radiation and subjected to thermal annealing. The wettability alteration has been showed to depend upon both treatments, and insights into how to introduce more stable hydrophilicity into these films have been presented for the sake of boosting their commercial value. Observations from multiple length scales to assess the wetting behavior of as-deposited and high-temperature annealed samples were assessed through macroscopic measurements, i.e., water contact angle measurements, showing that the annealed crystalline samples, treated at 500 °C, are much more hydrophilic (SCA ≈ 20°) than as-deposited TiO2 films (SCA ≈ 90°), and the nanoscopic experiments performed by amplitude modulation (AM) atomic force microscopy (AFM) indicated that this increased hydrophilicity is related to an enhanced adhesion force and surface energy, resulting in the partial crystallization of TiO2 and the consequent formation of crystals on its surface rather than being related to morphologic differences. XRD and Raman measurements have highlighted that the crystallinity of the TiO2 film is crucial in determining its hydrophilicity, in good agreement with the AFM study. The results also indicated that, after irradiation, the samples treated at 500 °C preserve their hydrophilicity for a significant time compared to previous studies.

Nanostructured anatase TiO2 densified at high pressure as advanced visible light photocatalysts.

This study reports on characterization and photoactivity of nanostructured TiO2 samples, which have been permanently densified under high pressures, up to 2.1 GPa. Commercial Mirkat 211 anatase has been used as a benchmark sample, in order to investigate the effect of unidirectional high pressure on structural, optical and photocatalytic properties of TiO2. Vibrational Raman spectroscopy shows that the treatment does not cause transitions among the different crystalline phases of titanium dioxide. UV-vis diffuse reflectance spectra reveal that increasing pressure gives rise to a shift of the absorption onset towards higher wavelength enhancing the photoactivity under visible radiation. Samples are also photo-electrochemically characterized and tested in the gas phase with partial oxidation of ethanol to acetaldehyde under visible irradiation. Compaction up to 0.8 GPa depresses both the alcohol conversion and the aldehyde yield, while samples treated under higher pressures show enhanced characteristics of conversion compared to the pristine material. Moreover, promising results in the reduction of CO2 are also obtained under UV-visible radiation.

Immobilized enzymatic membrane surfaces for biocatalytic organics removal and fouling resistance.

This research reported on the immobilization of environmentally friendly enzymes, such as horseradish peroxidase (HRP) and laccase (L), along with the hydrophilic zwitterionic compound l-DOPA on nano-filtration (NF) membranes. This approach introduced biocatalytic membranes, leveraging combined effects between membranes and enzymes. The aim was to systematically assess the efficacy of the enzymatic modified membrane (HRP-NF) in degrading colors in the wastewater, as well as enhancing the membrane resistance toward organic fouling. The enzymatic immobilized membrane demonstrated 96.3 ± 1.8% to 96.6 ± 1.9% removal of colors, and 65.2 ± 1.3% to 67.2 ± 1.3% removal of TOC. This result was underpinned by the insights obtained from the radical scavenger coumarin, which was employed to trap and confirm the formation of PRs through the reaction of enzymes and H2O2. Furthermore, membranes modified with enzymes exhibited significantly improved antifouling properties. The HRP-NF membrane experienced an 8% decline in flux, while the co-immobilized HRP-L-NF membrane demonstrated as low as 6% flux decline, contributed by the synergistic effect of increased hydrophilicity and biocatalytic effects. These findings confirmed that the immobilized enzymatic surface has added function of degrading contaminants in addition to separation function of nanofiltration membrane. These l-DOPA-immobilized enzymatic membranes offered a promising hybrid biocatalytic membrane to eliminate dyes and mitigate membrane fouling, which can be applied in many industrial and domestic water and wastewater treatment.

A structurally diverse heterocyclic library by decoration of oxcarbazepine scaffold.

A library of new heterocyclic systems was synthesized starting from oxcarbazepine (OXC, Trileptal, 10-oxo-10,11-dihydro-5H-dibenzo[b,f]azepine-5-carboxamide). The key for these transformations is the α-enolizable ketone present on the [d]-side of our starting material OXC, thus, an in depth investigation of the literature to find heteroannulation reactions for substrates carrying an α-enolizable ketone gave us a boost to discover an excellent derivatization strategy and [3+2], [4+2] and [4+1] approaches were successfully developed. Almost always a pre-functionalization was needed, but also the direct one-pot heterocycle construction was also explored.

One-pot sequential synthesis of isocyanates and urea derivatives via a microwave-assisted Staudinger-aza-Wittig reaction.

A fast and efficient protocol for the synthesis of N,N'-disubstituted urea derivatives from alkyl halides and primary or secondary amines has been developed. The synthetic pathway combines nucleophilic substitutions and a Staudinger-aza-Wittig reaction in the presence of polymer-bound diphenylphosphine under 14 bar of CO2 pressure and has been performed in a one-pot two-step process. The protocol has been optimized under microwave irradiation and the scale-up experiment has been conducted under conventional conditions in a Parr reactor. The final compounds were isolated after simple filtration in almost quantitative overall yields which makes this procedure facile and rapid to execute.

From Batch to the Semi-Continuous Flow Hydrogenation of pNB, pNZ-Protected Meropenem.

Meropenem is currently the most common carbapenem in clinical applications. Industrially, the final synthetic step is characterized by a heterogeneous catalytic hydrogenation in batch mode with hydrogen and Pd/C. The required high-quality standard is very difficult to meet and specific conditions are required to remove both protecting groups [i.e., p-nitrobenzyl (pNB) and p-nitrobenzyloxycarbonyl (pNZ)] simultaneously. The three-phase gas-liquid-solid system makes this step difficult and unsafe. The introduction of new technologies for small-molecule synthesis in recent years has opened up new landscapes in process chemistry. In this context, we have investigated meropenem hydrogenolysis using microwave (MW)-assisted flow chemistry for use as a new technology with industrial prospects. The reaction parameters (catalyst amount, T, P, residence time, flow rate) in the move from the batch process to semi-continuous flow were investigated under mild conditions to determine their influence on the reaction rate. The optimization of the residence time (840 s) and the number of cycles (4) allowed us to develop a novel protocol that halves the reaction time compared to batch production (14 min vs. 30 min) while maintaining the same product quality. The increase in productivity using this semi-continuous flow technique compensates for the slightly lower yield (70% vs. 74%) obtained in batch mode.

Phosphorus-modified copper ferrite (P-CuFe2O4) nanoparticles for photocatalytic ozonation of lomefloxacin.

Phosphorus-modified copper ferrite (P-CuFe2O4) nanoparticles were prepared by a simple sol-gel auto-combustion process and used for the photocatalytic ozonation of lomefloxacin (LOM). The morphology, crystallinity, and structure of the synthesized CuFe2O4 and P-CuFe2O4 nanoparticles were investigated using various techniques. The high-performance liquid chromatography (HPLC) analysis revealed that the degradation of LOM achieved a 99% reduction after a duration of 90 min in the photocatalytic ozonation system. In accordance with the charge-to-mass ratio, four intermediates were proposed with the help of their fragments obtained in LC-MS/MS. The degradation kinetics of lomefloxacin followed a pseudo-first order reaction, and the degradation mechanism was proposed based on the results. P0.035Cu0.965Fe2O4 showed the highest total organic carbon (TOC) removal with 20.15% in 90 min, highest specific surface area and the highest fluoride and ammonium production using the ion chromatography (IC). The experimental results obtained from the electron paramagnetic resonance (EPR) analysis indicated that the modified P-CuFe2O4 samples exhibited significantly elevated levels of superoxide (.O2-) production compared to the CuFe2O4 samples. The findings of this study demonstrate that the introduction of phosphorus modification into the copper ferrite photocatalyst led to an augmentation of both the specific surface area and the total pore volume. Furthermore, the incorporation of phosphorus served to promote the efficient separation of electron-hole pairs by effectively trapping electrons in the conduction band, hence enhancing the degradation efficiency.

Functional Foods Acceptability: A Consumers' Survey on Bread Enriched with Oenological By-Products.

In recent years, consumers have shown considerable attention to functional foods that can provide various benefits. At the same time, the awareness of the problem of waste generation from the agri-food supply chains has increased; thus, scholars and practitioners are devoting great attention to sustainable food waste management. Within the wine processing, the production phase generates by-products such as marc, grape seeds, stems, and wine lees. In most cases, these by-products are treated as waste rather than as a resource, creating environmental, economic, and social impacts related to their disposal. By contrast, the reuse of oenological by-products in food production can have several health benefits, since they are rich in functional molecules such as fibres, polyphenols, and vitamin E, and can also trigger a circular economy model. The aim of this research is to investigate the acceptance of consumers towards bread enriched with oenological by-products through the application of k-means clustering, providing insights on the characterisation of groups of consumers based on their specific features and declared attitudes. The results showed three different consumers' clusters, highlighting that the acceptance of this enriched bread is not influenced by the consumers' socio-economic features, but it is related to consumers' sensitivity. Therefore, target strategies should be put in place to inform consumers about the benefits associated with the consumption of bread enriched with oenological by-products.

Environmental fate of sulfonated-PCBs: Soil partitioning properties, bioaccumulation, persistence, and mobility.

Two new classes of PCB metabolites were recently discovered: sulfonated-polychlorinated biphenyls (sulfonated-PCBs) and hydroxy-sulfonated-polychlorinated biphenyls (OH-sulfonated-PCBs). These metabolites, originating from PCB degradation, seem to possess more polar characteristics than their parent compounds. However, no other information, such as their chemical identity (CAS number) or their ecotoxicity or toxicity, is available so far, although more than about one hundred different chemicals were observed in soil samples. In addition, their physico-chemical properties are still uncertain since only estimations are available. Here we show the first evidence on the fate of these new classes of contaminants in the environment, producing results from several experiments, to evaluate sulfonated-PCBs and OH-sulfonated-PCBs soil partition coefficients, degradation in soil after 18 months of rhizoremediation, uptake into plant roots and earthworms, as well as a preliminary analytical method to extract and concentrate these chemicals from water. The results give an overview of the expected environmental fate of these chemicals and open questions for further studies.

Synthesis of a new sulfonated-hexachlorobiphenyl standard for environmental analysis, ecotoxicological, and toxicological studies.

Sulfonated-polychlorinated biphenyls (sulfonated-PCBs) are a newly discovered class of PCB metabolites. They were observed for the first time in polar bear serum and lately, in soil, together with hydroxy-sulfonated-PCBs. Their presence is ubiquitous in soils, and their estimated physical chemical properties show high mobility in water, compared to the parent compounds. However, no single pure standards exist so far and therefore their quantification in the environmental matrices is not accurate. Additionally, pure standards are needed to experimentally determine their physical chemical properties, as well as the ecotoxicological and toxicological characteristics. In the present work, the challenging goal of preparing a polychlorinated biphenyl monosulfonic acid was achieved exploring different synthetic approaches, along which the selection of the starting material resulted in a crucial point. Using PCB-153 (2,2'-4,4'-5,5'-hexachloro-1,1'-biphenyl) the synthesis afforded, as the major species, a side compound. On the contrary, the use of PCB-155 (2,2'-4,4'-6,6'-hexachloro-1,1'-biphenyl), a symmetric hexachlorobiphenyl derivative showing chlorine atoms at all the ortho positions, gave the target sulfonated-PCB compound. In this case, sulfonation was successfully carried out through a two-step procedure, involving chlorosulfonylation and the subsequent hydrolysis of the chlorosulfonyl intermediate.

Tuning the adsorption properties of isoreticular pyrazolate-based metal-organic frameworks through ligand modification.

Two isoreticular series of pyrazolate-based 3D open metal-organic frameworks, MBDP_X, adopting the NiBDP and ZnBDP structure types [H(2)BDP = 1,4-bis(1H-pyrazol-4-yl)benzene], were synthesized with the new tagged organic linkers H(2)BDP_X (X = -NO(2), -NH(2), -OH). All of the MBDP_X materials have been characterized through a combination of techniques. IR spectroscopy proved the effective presence of tags, while X-ray powder diffraction (XRPD) witnessed their isoreticular nature. Simultaneous TG/DSC analyses (STA) demonstrated their remarkable thermal stability, while variable-temperature XRPD experiments highlighted their high degree of flexibility related to guest-induced fit processes of the solvent molecules included in the channels. A structural isomer of the parent NiBDP was obtained with a sulfonate tagged ligand, H(2)BDP_SO(3)H. Structure solution from powder diffraction data collected at three different temperatures (room temperature, 90, and 250 °C) allowed the determination of its structure and the comprehension of its solvent-related flexible behavior. Finally, the potential application of the tagged MOFs in selective adsorption processes for gas separation and purification purposes was investigated by conventional single component adsorption isotherms, as well as by advanced experiments of pulse gas chromatography and breakthrough curve measurements. Noteworthy, the results show that functionalization does not improve the adsorption selectivity (partition coefficients) for the resolution of gas mixtures characterized by similar high quadrupole moments (e.g., CO(2)/C(2)H(2)); however, the resolution of gas mixtures containing molecules with highly differentiated polarities (i.e., N(2)/CO(2) or CH(4)/CO(2)) is highly improved.

Excited-state dynamics of bis-dehydroxycurcumin carboxylic acid, a water-soluble derivative of the photosensitizer curcumin.

Bis-dehydroxycurcumin carboxylic acid (K2A23) is a synthetic curcuminoid designed to exhibit enhanced water solubility and photosensitizing potential with respect to natural curcumin. In this work, the tendency of the compound to form intra- and intermolecular hydrogen bonds in the ground state is studied by UV-visible absorption and by nuclear magnetic resonance (NMR). The excited-state dynamics of the drug are probed in different environments by means of time-correlated single-photon counting measurements and related to its hydrogen bonding affinity in the excited state.