RESUMEN
PURPOSE: Many studies have reported declines in semen quality mainly focused on total sperm counts (TSC) and sperm concentration (SC), ignoring the importance of progressive motile sperm (PR), total motile sperm (TM), and normal morphological sperm (NM). Therefore, we performed a comprehensive meta-analysis to explore the trend in semen quality of young men. METHODS: We searched 3 English databases and 4 Chinese databases from January 1980 to August 2022. Random-effect meta-analyses and weighted linear regression models were conducted to perform the trend in semen quality. RESULTS: Finally, 162 eligible studies including 264,665 men from 28 countries were got between 1978 and 2021. Significant decreases were observed in TSC (- 3.06 million/year, 95% CI - 3.28 to - 2.84), SC (- 0.47 million/ml/year, 95% CI - 0.51 to - 0.43), and PR (- 0.15%/year, 95% CI - 0.20 to - 0.09), and there was an upward trend in TM (0.28%/year, 95% CI 0.24 to 0.32). The results of meta-regression analyses indicated that age, continent, income, WHO criteria, and abstinence time significantly impacted on TSC, SC, PR, and TM. Positive regression coefficients were observed in some categories suggesting that outcomes might not be declining and even increasing in these subgroups. CONCLUSIONS: Downward trends in semen quality among global young men were observed in our study, including TSC, SC, and PR. But TM did not appear to be trending down or even to be leveling off. More studies are needed to focus on the causes of the declines.
Asunto(s)
Análisis de Semen , Semen , Masculino , Humanos , Motilidad Espermática , Recuento de Espermatozoides , Espermatozoides , Análisis de RegresiónRESUMEN
Photoredox-mediated reversible deactivation radical polymerization (RDRP) is a promising method of precise synthesis of polymers with diverse structures and properties. However, its mechanism mainly based on the outer-sphere electron transfer (OSET) leads to stringent requirements for an efficient photocatalyst. In this paper, the zwitterionic organoboranes [L2B]+X- are prepared and applied in reversible addition-fragmentation chain transfer (RAFT) polymerization with the photoinduced ion-pair inner-sphere electron transfer (IP-ISET) mechanism. The ion-pair electron transfer mechanism and the formation of the radical [L2B]⢠are supported by electron paramagnetic resonance (EPR) radical capture experiments, 1H/11B NMR spectroscopy, spectroelectrochemical spectroscopy, transient absorption spectroscopy, theoretical calculation, and photoluminescence quenching experiments. Photoluminescence quenching experiments show that when [CTA]/[[L2B]+] ≥ 0.6, it is static quenching because of the in situ formation of [L2B]+[ZCS2]-, the real catalytic species. [L2B]+[C3H7SCS2]- is synthesized, and its photoluminescence lifetime is the same as the lifetime in the static quenching experiment, indicating the formation of [L2B]+[ZCS2]- in polymerization and the IP-ISET mechanism. The matrix-assisted laser desorption ionization time-of-flight mass (MALDI-TOF MS) spectra show that the structure of [C3H7SCS2] was incorporated into the polymer, indicating that ion-pair electron transfer occurs in catalytic species. The polymerization shows high catalytic activity at ppb catalyst loading, a wide range of monomers, excellent tolerance in the presence of 5 mol % phenolic inhibitors, and the synthesis of ultrahigh-molecular-weight polymers. This protocol with the IP-ISET mechanism exhibits a value in the development of new organic transformations and polymerization methods.
Asunto(s)
Electrones , Polímeros , Polimerizacion , Polímeros/química , Catálisis , Peso MolecularRESUMEN
Organosilicon compounds and polymers have found wide applications as synthetic building blocks and functional materials. Hydrosilylation is a common strategy toward the synthesis of organosilicon compounds and polymers. Although transition-metal-catalyzed hydrosilylation has achieved great advances, the metal-free hydrosilylation polymerization of dienes and bis(silane)s, especially the one suitable for both electron-rich and electron-deficient dienes, is largely lacking. Herein, we report a visible-light-driven metal-free hydrosilylation polymerization of both electron-rich and electron-deficient dienes with bis(silane)s by using the organic photocatalyst and hydrogen atom transfer (HAT) catalyst. We achieved the well-controlled step-growth hydrosilylation polymerizations of the electron-rich diene and bis(silane) monomer due to the selective activation of Si-H bonds by the organic photocatalyst (4CzIPN) and the thiol polarity reversal reagent (HAT 1). For the electron-deficient dienes, hydrosilylation polymerization and self-polymerization occurred simultaneously in the presence of 4CzIPN and aceclidine (HAT 2), providing the opportunity to produce linear, hyperbranched, and network polymers by rationally tuning the concentration of electron-deficient dienes and the ratio of bis(silane)s and dienes to alter the proportion of the two polymerizations. A wide scope of bis(silane)s and dienes furnished polycarbosilanes with high molecular weight, excellent thermal stability, and tunable architectures.
RESUMEN
Groundwater contamination by halogenated organic compounds, especially fluorinated ones, threatens freshwater sources globally. Sulfidized nanoscale zero-valent iron (SNZVI), which is demonstrably effective for dechlorination of groundwater contaminants, has not been well explored for defluorination. Here, we show that SNZVI nanoparticles synthesized via a modified post-sulfidation method provide rapid dechlorination (â¼1100 µmol m-2 day-1) and relatively fast defluorination (â¼6 µmol m-2 day-1) of a halogenated emerging contaminant (florfenicol) under ambient conditions, the fastest rates that have ever been reported for Fe0-based technologies. Batch reactivity experiments, material characterizations, and theoretical calculations indicate that coating S onto the metallic Fe surface provides a highly chemically reactive surface and changes the primary dechlorination pathway from atomic H for nanoscale zero-valent iron (NZVI) to electron transfer for SNZVI. S and Fe sites are responsible for the direct electron transfer and atomic H-mediated reaction, respectively, and ß-elimination is the primary defluorination pathway. Notably, the Cl atoms in florfenicol make the surface more chemically reactive for defluorination, either by increasing florfenicol adsorption or by electronic effects. The defluorination rate by SNZVI is â¼132-222 times higher with chlorine attached compared to the absence of chlorine in the molecule. These mechanistic insights could lead to new SNZVI materials for in situ groundwater remediation of fluorinated contaminants.
Asunto(s)
Agua Subterránea , Tricloroetileno , Contaminantes Químicos del Agua , Hierro , Azufre , Tianfenicol/análogos & derivados , AguaRESUMEN
Chiral induced spin selectivity (CISS) describes efficient spin filtering by chiral molecules. This phenomenon has led to nanoscale manipulation of quantum spins with promising applications to spintronics and quantum computing, since its discovery nearly two decades ago. However, its underlying mechanism still remains mysterious for the required spin-orbit interaction (SOI) strength is unexpectedly large. Here we report a multi-orbital theory for CISS, where an effective SOI emerges from spontaneous formation of electron-hole pairing caused by many-body correlation. This mechanism produces a strong SOI reaching the energy scale of room temperature, which could support the large spin polarization observed in CISS. One central ingredient of our theory is the Wannier functions of the valence and conduction bands correspond, respectively, to one- and two-dimensional representation of the spatial rotation symmetry around the molecule elongation direction. The induced SOI strength is found to decrease when the band gap increases. Our theory may provide important guidance for searching other molecules with CISS effects.
RESUMEN
Copper-catalyzed atom transfer radical polymerization (Cu-ATRP) is one of the most widely used controlled radical polymerization techniques. Notwithstanding the extensive mechanistic studies in the literature, the transition states of the activation/deactivation of the growing polymer chain, a key equilibrium in Cu-ATRP, have not been investigated computationally. Therefore, the understanding of the origin of ligand and initiator effects on the rates of activation/deactivation is still limited. Here, we present the first computational analysis of Cu-ATRP activation transition states to reveal factors that affect the rates of activation and deactivation. The Br atom transfer between the polymer chain and the Cu catalyst occurs through an unusual bent geometry that involves pronounced interactions between the polymer chain end and the ancillary ligand on the Cu catalyst. Therefore, the rates of activation/deactivation are determined by both the electronic properties of the Cu catalyst and the ligand-initiator steric repulsions. In addition, our calculations revealed the important role of ligand backbone flexibility on the activation. These theoretical analyses led to the identification of three chemically meaningful descriptors, namely HOMO energy of the catalyst ( EHOMO), percent buried volume ( Vbur%), and distortion energy of the catalyst (Δ Edist), to describe the electronic, steric, and flexibility effects on reactivity, respectively. A robust and simple predictive model for ligand effect on reactivity is thereby established by correlating these three descriptors with experimental activation rate constants using multivariate linear regression. Validation using a structurally diverse set of ligands revealed the average error is less than ±2 kcal/mol compared to the experimentally derived activation energies. The same approach was also applied to develop a predictive model for reactivity of different alkyl halide initiators using R-X bond dissociation energy (BDE) and Cu-X halogenophilicity as descriptors.
Asunto(s)
Cobre/química , Catálisis , Radicales Libres/síntesis química , Radicales Libres/química , Ligandos , Modelos Moleculares , Polimerizacion , Estrés Mecánico , TermodinámicaRESUMEN
Spatial and temporal regulations of ATRP by external stimuli are presented. Various ATRP techniques, eATRP, photoATRP, and mechanoATRP, are controlled by electrical current, light, and mechanical forces, respectively. Conversely, ARGET and SARA ATRP are controlled by chemical reducing agents. ICAR ATRP is a thermally regulated process through decomposition of a radical initiator. The aim of this review is to highlight the use of external regulations in ATRP and to summarize the state-of-the-art and future perspectives, focusing on mechanistic aspects, synthetic procedures, preparation of polymers with complex architectures and functional materials, and their applications.
RESUMEN
A rapid oxygen-initiated and -regulated controlled radical polymerization was conducted under ambient temperature and atmosphere. The reaction between triethylborane and oxygen provides ethyl radicals, which initiate and mediate the radical polymerization. The controlled radical polymerization was achieved using RAFT chain transfer agents (CTA) without any process of removing oxygen, providing well-defined polymers with almost full conversion (>95 %) in a short period (15â min). High-throughput screening was used to discover the suitable conditions for various CTA and monomers. To show the versatility of this method, a polymer library containing 25 well-defined polymers with different compositions (block and statistical copolymers) and molecular weights were synthesized in 1â h via high-throughput synthesis technique. A polymer-painting technique was developed using this method, forming films with spatial control and excellent control in molecular weight and dispersity.
RESUMEN
This paper reports use of phenyl benzo[b]phenothiazine (Ph-benzoPTZ) as a visible light-induced metal-free atom transfer radical polymerization (ATRP) photoredox catalyst. Well-controlled polymerizations of various methacrylate monomers were conducted under a 392â nm visible light LED using Ph-benzoPTZ to activate different alkyl halides. The use of the photocatalyst enabled temporal control over the growth of polymer chains during intermittent on/off periods. The polymerization was initiated and progressed only under stimulation by light and completely stopped in the absence of light. Block copolymers were synthesized to demonstrate high retention of chain end fidelity in the polymers and livingness of the process.
RESUMEN
A photoinduced atom transfer radical polymerization (photoATRP) of methacrylates is investigated using air-stable FeBr3 as catalyst in the absence of conventional ATRP initiators, additional ligands, reducing agents, and/or radical initiators. The ATRP alkyl halide initiator is formed in situ via photoreduction of FeBr3 by methacrylate monomers. The kinetics of the polymerization display a linear semilogarithmic plot after several hours of induction period. The molecular weight can be modulated by additions of different amounts of FeBr3 , and polymers have narrow molecular weight distributions. Thus, FeBr3 acts as deactivator, as well as a source of activator FeBr2 and initiator. This method features a temporal control, and can provide various polymethacrylates with high chain end functionality.
Asunto(s)
Hierro/química , Metacrilatos/síntesis química , Polimerizacion , Polímeros/síntesis química , Solventes/química , Catálisis , Polimerizacion/efectos de la radiaciónRESUMEN
A DNA synthesizer was successfully employed for preparation of well-defined polymers by atom transfer radical polymerization (ATRP), in a technique termed AutoATRP. This method provides well-defined homopolymers, diblock copolymers, and biohybrids under automated photomediated ATRP conditions. PhotoATRP was selected over other ATRP methods because of mild reaction conditions, ambient temperature, tolerance to oxygen, and no need to introduce reducing agents or radical initiators. Both acrylate and methacrylate monomers were successfully polymerized with excellent control in the DNA synthesizer. Diblock copolymers were synthesized with different targeted degrees of polymerization and with high retention of chain-end functionality. Both hydrophobic and hydrophilic monomers were grafted from DNA. The DNA-polymer hybrids were characterized by SEC and DLS. The AutoATRP method provides an efficient route to prepare a range of different polymeric materials, especially polymer-biohybrids.
Asunto(s)
Automatización/instrumentación , ADN/síntesis química , Polímeros/síntesis química , ADN/química , Radicales Libres/síntesis química , Radicales Libres/química , Interacciones Hidrofóbicas e Hidrofílicas , Estructura Molecular , Polimerizacion , Polímeros/químicaRESUMEN
Photoinduced metal-free atom transfer radical polymerization (ATRP) of methyl methacrylate was investigated using several phenothiazine derivatives and other related compounds as photoredox catalysts. The experiments show that all selected catalysts can be involved in the activation step, but not all of them participated efficiently in the deactivation step. The redox properties and the stability of radical cations derived from the catalysts were evaluated by cyclic voltammetry. Laser flash photolysis (LFP) was used to determine the lifetime and activity of photoexcited catalysts. Kinetic analysis of the activation reaction according to dissociative electron-transfer (DET) theory suggests that the activation occurs only with an excited state of catalyst. Density functional theory (DFT) calculations revealed the structures and stabilities of the radical cation intermediates as well as the reaction energy profiles of deactivation pathways with different photoredox catalysts. Both experiments and calculations suggest that the activation process undergoes a DET mechanism, while an associative electron transfer involving a termolecular encounter (the exact reverse of DET pathway) is favored in the deactivation process. This detailed study provides a deeper understanding of the chemical processes of metal-free ATRP that can aid the design of better catalytic systems. Additionally, this work elucidates several important common pathways involved in synthetically useful organic reactions catalyzed by photoredox catalysts.
RESUMEN
Photoinduced ATRP was successfully performed in aqueous media. Polymerization of oligo(ethylene oxide) methyl ether methacrylate (OEOMA) in the presence of CuBr2 catalyst and tris(2-pyridylmethyl)amine ligand when irradiated with visible light of 392 nm wavelength at 0.9 mW/cm(2) intensity was well controlled. Linear semi-logarithmic kinetic plots and molecular weights increasing with conversion were observed. Polymers of OEOMA were synthesized with low dispersity (Mw/Mn = 1.12) using only 22 ppm of copper catalyst in the presence of excess bromide anions in highly diluted (90% v/v) aqueous media. The effects of copper concentration, salt, and targeted degrees of polymerization were investigated. The polymerization could be directly regulated by external stimulation, i.e., switching the irradiation on/off, with a good retention of chain-end functionality, as proved by clean chain extension of the OEOMA polymers. This new system could enable applications for controlled aqueous radical polymerization due to its low catalyst loading in the absence of any other chemicals.
RESUMEN
Dynamic NMR spectroscopy has been used to measure rotation barriers in five B,B-disubstituted 1,3-dimethylimidazol-2-ylidene boranes. The barriers are attributed to the sp(2)-sp(3) bond between C(1) of the N-heterocyclic carbene ring and the boron atom. Bonds to boron atoms bearing a thexyl (1,1,2-trimethylpropyl) group show especially high barriers, ranging from 75-86 kJ mol(-1). 2-Isopropyl-1,3,5-trimethylbenzene is used as a comparable to help understand the nature and magnitude of the barriers.
RESUMEN
Based on the characteristics of commodity polymers in large quantities and low costs, modification of existing commodity polymers emerges as the most effective approach for exploring novel materials. Nevertheless, conventional modification methods typically involve high-energy processes (e.g., high temperature, high-energy radiation), which may lead to irreversible detrimental effects on the polymers, contradicting the desired performance enhancement through modification. In this work, we propose a carbene-mediated postpolymerization modification (PPM) strategy utilizing diazo compounds. Under photochemical or thermal activation conditions, insertion of the C-H bond can be achieved without compromising the performance of polymers. These diazo compounds can be easily synthesized in just two steps and applied to all C-H-containing polymers. This practical and effective modification strategy offers new opportunities and possibilities for enhancing the value and expanding the applications of polymers.
RESUMEN
BACKGROUND: Infertility affects 186 million people worldwide, with male factors contributing to 50% of infertility cases. Semen analysis is a key for diagnosing male factor infertility, but sperm parameters can be influenced by ejaculatory abstinence (EA) duration. Shortening or prolonging EA can impact on semen quality and assisted reproductive technology (ART) outcomes, but the optimal EA duration remains unclear, particularly for infertility patients. OBJECTIVES: This study conducts a comprehensive meta-analysis to explore the impact of varying abstinence durations on semen quality and fertility outcomes. METHODS: Three English database (PubMed, Embase, and Cochrane Central Register of Controlled Trials) as well as four Chinese database (China National Knowledge Infrastructure, Chinese Scientific Journals database, WanFang database, and Chinese Biomedical Literature database) were searched from 2000 to August 2023. The classical meta-analysis and "one-stage" dose-response meta-analysis were conducted to compare the associations of different abstinence durations (short-term abstinence vs. long-term abstinence) on semen quality in healthy adult and different type of infertile patients. RESULTS: There were 85 eligible studies were finally included. The meta-analysis of volume (mean difference [MD] = -0.95 mL, 95% confidence interval [CI]: -1.16 to -0.74 mL), total sperm count (TSC) (MD = -102.45×106, 95% CI: -117.98×106 to -86.91×106), sperm concentration (SC) (MD = -11.88×106/mL, 95% CI: -18.96×106/mL to -4.80×106/mL), DNA fragmentation index (DFI) (MD = -2.37%, 95% CI: -4.73% to -0.01%) in healthy men showed a significant decrease with different abstinence durations (short-term abstinence vs. long-term abstinence). The meta-analysis of infertile men showed significant decrease in volume in various subgroups (MD range: -0.73 to -1.17 mL) with P < 0.01; TSC (MD = -61.93×106, 95% CI: -88.84×106 to -35.01×106), SC (MD = -5.39×106/mL, 95% CI: -9.97×106 to -0.81×106/mL), DFI (MD = -5.63%, 95% CI: -10.19% to -1.06%) in unexplained infertility subgroup; significant increase in viability (MD = 6.14%, 95% CI: 3.61% to 8.68%) in the unexplained infertility subgroup. The dose-response meta-analysis showed that TSC in oligozoospermia showed a nonlinear increase (coefficient from 3.38 to -5.76, P from 0.02 to 0.22) and the truncation point was around the 4th to 5th abstinence day. The percentage of progressive motile sperm (PR) in asthenozoospermia showed a significant decrease (coefficient = -2.39, 95% CI: -4.28 to -0.50). For fertility outcomes of different ARTs, only the clinical pregnancy rate (CPR) in the intrauterine insemination (IUI) subgroup showed a significant decrease around the 3rd day (coefficient = 0.85, 95% CI: 0.75 to 0.97). CONCLUSIONS: Short-term abstinence may be associated with limited improvements in semen quality in healthy men but could be more beneficial for infertile men, especially within the first 4 days of abstinence. Caution is urged in making definitive conclusions about the causal relationship between abstinence time and semen quality changes due to potential confounding and interactions.
Asunto(s)
Infertilidad Masculina , Análisis de Semen , Abstinencia Sexual , Humanos , Masculino , Infertilidad Masculina/fisiopatología , Factores de Tiempo , Recuento de Espermatozoides , FertilidadRESUMEN
BACKGROUND: Distal gastrectomy (DG) is a commonly used surgical procedure for gastric cancer (GC), with three reconstruction methods available: Billroth I, Billroth II, and Roux-en-Y. In 2018, our team published a systematic review to provide guidance for clinical practice on the optimal reconstruction method after DG for GC. However, since then, new evidence from several randomized controlled trials (RCTs) has emerged, prompting us to conduct an updated systematic review and network meta-analysis to provide the latest comparative estimates of the efficacy and safety of the three reconstruction methods after DG for GC. METHOD: This systematic review and network meta-analysis update followed the PRISMA-P guidelines and will include a search of PubMed, Embase, and the Cochrane Library for RCTs comparing the outcomes of Billroth I, Billroth II, or Roux-en-Y reconstruction after DG for patients with GC. Two independent reviewers will screen the titles and abstracts based on predefined eligibility criteria, and two reviewers will assess the full texts of relevant studies. The Bayesian network meta-analysis will evaluate various outcomes, including quality of life after surgery, anastomotic leakage within 30 days after surgery, operation time, intraoperative blood loss, major postoperative complications within 30 days after surgery, incidence and severity of bile reflux, and loss of body weight from baseline. ETHICS AND DISSEMINATION: The review does not require ethical approval. The findings of the review will be disseminated through publication in an academic journal, presentations at conferences, and various media outlets. INPLASY REGISTRATION NUMBER: INPLASY2021100060.
Asunto(s)
Neoplasias Gástricas , Humanos , Neoplasias Gástricas/cirugía , Metaanálisis en Red , Revisiones Sistemáticas como Asunto , Metaanálisis como Asunto , Gastroenterostomía , GastrectomíaRESUMEN
Polymer materials suffer mechano-oxidative deterioration or degradation in the presence of molecular oxygen and mechanical forces. In contrast, aerobic biological activities combined with mechanical stimulus promote tissue regeneration and repair in various organs. A synthetic approach in which molecular oxygen and mechanical energy synergistically initiate polymerization will afford similar robustness in polymeric materials. Herein, aerobic mechanochemical reversible-deactivation radical polymerization was developed by the design of an organic mechano-labile initiator which converts oxygen into activators in response to ball milling, enabling the reaction to proceed in the air with low-energy input, operative simplicity, and the avoidance of potentially harmful organic solvents. In addition, this approach not only complements the existing methods to access well-defined polymers but also has been successfully employed for the controlled polymerization of (meth)acrylates, styrenic monomers and solid acrylamides as well as the synthesis of polymer/perovskite hybrids without solvent at room temperature which are inaccessible by other means.
RESUMEN
The hydroboration of alkenes of diverse structural types by assorted N-heterocyclic carbene boranes can be accomplished by addition of 5-10% diiodine. For example, reaction of 1,3-dimethylimidazol-2-ylidene borane (diMe-Imd-BH3) with 10% I2 followed by addition of 2,3-dimethyl-2-butene provided the corresponding thexyl NHC-borane (diMe-Imd-BH2thexyl) in 75% yield. This and related monohydroboration products are stable to chromatography and storage. The scope of the new reaction is described, and the mechanism is probed by (11)B NMR experiments.
RESUMEN
Reactions of 1,3-dimethylimidazol-2-ylidene-borane (diMe-Imd-BH3) and related NHC-boranes with diaryl and diheteroaryl disulfides provide diverse NHC-boryl monosulfides (diMe-Imd-BH2SAr) and NHC-boryl disulfides (diMe-Imd-BH(SAr)2). Heating in the dark with 1 equiv of disulfide favors monosulfide formation, while irradiation with 2 equiv disulfide favors disulfide formation. With heteroaryl disulfides, the NHC-borane in the primary NHC-boryl sulfide product migrates from sulfur to nitrogen to give new products with a thioamide substructure. Most substitution reactions are thought to proceed through radical chains in which homolytic substitution of a disulfide by an NHC-boryl radical is a key step. However, with electrophilic disulfides under dark conditions, a competing ionic path may also be possible.