Insights into the Complexation Mechanism of a Promising Lipophilic PyTri Ligand for Actinide Partitioning from Spent Nuclear Fuel.

The challenging issue of spent nuclear fuel (SNF) management is being tackled by developing advanced technologies that point to reduce environmental footprint, long-term radiotoxicity, volumes and residual heat of the final waste, and to increase the proliferation resistance. The advanced recycling strategy provides several promising processes for a safer reprocessing of SNF. Advanced hydrometallurgical processes can extract minor actinides directly from Plutonium and Uranium Reduction Extraction raffinate by using selective hydrophilic and lipophilic ligands. This research is focused on a recently developed N-heterocyclic selective lipophilic ligand for actinides separation to be exploited in advanced Selective ActiNide EXtraction (SANEX)-like processes: 2,6-bis(1-(2-ethylhexyl)-1H-1,2,3-triazol-4-yl)pyridine (PyTri-Ethyl-Hexyl-PTEH). The formation and stability of metal-ligand complexes have been investigated by different techniques. Preliminary studies carried out by electrospray ionization mass spectrometry (ESI-MS) analysis enabled to qualitatively explore the PTEH complexes with La(III) and Eu(III) ions as representatives of lanthanides. Time-resolved laser fluorescence spectroscopy (TRLFS) experiments have been carried out to determine the ligand stability constants with Cm(III) and Eu(III) and to better investigate the ligand complexes involved in the extraction process. The contribution of a 1:3 M/L complex, barely identified by ESI-MS analyses, was confirmed as the dominant species by TRLFS experiments. To shed light on ligand selectivity toward actinides over lanthanides, NMR investigations have been performed on PTEH complexes with Lu(III) and Am(III) ions, thereby showing significant differences in chemical shifts of the coordinating nitrogen atoms providing proof of a different bond nature between actinides and lanthanides. These scientific achievements encourage consideration of this PyTri ligand for a potential large-scale implementation.

Inclusion complexes of ß-cyclodextrin with tricyclic drugs: an X-ray diffraction, NMR and molecular dynamics study.

Tricyclic fused-ring cyclobenzaprine (1) and amitriptyline (2) form 1:1 inclusion complexes with ß-cyclodextrin (ß-CD) in the solid state and in water solution. Rotating frame NOE experiments (ROESY) showed the same geometry of inclusion for both 1/ß-CD and 2/ß-CD complexes, with the aromatic ring system entering the cavity from the large rim of the cyclodextrin and the alkylammonium chain protruding out of the cavity and facing the secondary OH rim. These features matched those found in the molecular dynamics (MD) simulations in solution and in the solid state from single-crystal X-ray diffraction of 1/ß-CD and 2/ß-CD complexes. The latter complex was found in a single conformation in the solid state, whilst the MD simulations in explicit water reproduced the conformational transitions observed experimentally for the free molecule.

Dynamics and interactions of ibuprofen in cyclodextrin nanosponges by solid-state NMR spectroscopy.

Two different formulations of cyclodextrin nanosponges (CDNS), obtained by polycondensation of ß-cyclodextrin with ethylenediaminetetraacetic acid dianhydride (EDTAn), were treated with aqueous solutions of ibuprofen sodium salt (IbuNa) affording hydrogels that, after lyophilisation, gave two solid CDNS-drug formulations. 1H fast MAS NMR and 13C CP-MAS NMR spectra showed that IbuNa was converted in situ into its acidic and dimeric form (IbuH) after freeze-drying. 13C CP-MAS NMR spectra also indicated that the structure of the nanosponge did not undergo changes upon drug loading compared to the unloaded system. However, the 13C NMR spectra collected under variable contact time cross-polarization (VCT-CP) conditions showed that the polymeric scaffold CDNS changed significantly its dynamic regime on passing from the empty CDNS to the drug-loaded CDNS, thus showing that the drug encapsulation can be seen as the formation of a real supramolecular aggregate rather than a conglomerate of two solid components. Finally, the structural features obtained from the different solid-state NMR approaches reported matched the information from powder X-ray diffraction profiles.

Hydrophilic Clicked 2,6-Bis-triazolyl-pyridines Endowed with High Actinide Selectivity and Radiochemical Stability: Toward a Closed Nuclear Fuel Cycle.

There is still an evident need for selective and stable ligands able to separate actinide(III) from lanthanide(III) metal ions in view of the treatment of the accumulated radioactive waste and of the recycling of minor actinides. We have herein demonstrated that hydrophilic 2,6-bis-triazolyl-pyridines are able to strip all actinides in all the different oxidation states from a diglycolamide-containing kerosene solution into an acidic aqueous phase. The ascertained high actinide selectivity, efficiency, extraction kinetics, and chemical/radiolytic stability spotlight this hydrophilic class of ligands as exceptional candidates for advanced separation processes fundamental for closing the nuclear fuel cycle and solving the environmental issues related to the management of existing nuclear waste.

Aminoacetone oxidase from Streptococcus oligofermentans belongs to a new three-domain family of bacterial flavoproteins.

The aaoSo gene from Streptococcus oligofermentans encodes a 43 kDa flavoprotein, aminoacetone oxidase (SoAAO), which was reported to possess a low catalytic activity against several different L-amino acids; accordingly, it was classified as an L-amino acid oxidase. Subsequently, SoAAO was demonstrated to oxidize aminoacetone (a pro-oxidant metabolite), with an activity ~25-fold higher than the activity displayed on L-lysine, thus lending support to the assumption of aminoacetone as the preferred substrate. In the present study, we have characterized the SoAAO structure-function relationship. SoAAO is an FAD-containing enzyme that does not possess the classical properties of the oxidase/dehydrogenase class of flavoproteins (i.e. no flavin semiquinone formation is observed during anaerobic photoreduction as well as no reaction with sulfite) and does not show a true L-amino acid oxidase activity. From a structural point of view, SoAAO belongs to a novel protein family composed of three domains: an α/ß domain corresponding to the FAD-binding domain, a ß-domain partially modulating accessibility to the coenzyme, and an additional α-domain. Analysis of the reaction products of SoAAO on aminoacetone showed 2,5-dimethylpyrazine as the main product; we propose that condensation of two aminoacetone molecules yields 3,6-dimethyl-2,5-dihydropyrazine that is subsequently oxidized to 2,5-dimethylpyrazine. The ability of SoAAO to bind two molecules of the substrate analogue O-methylglycine ligand is thought to facilitate the condensation reaction. A specialized role for SoAAO in the microbial defence mechanism related to aminoacetone catabolism through a pathway yielding dimethylpyrazine derivatives instead of methylglyoxal can be proposed.

Polydisperse methyl ß-cyclodextrin-epichlorohydrin polymers: variable contact time (13)C CP-MAS solid-state NMR characterization.

The polymerization of partially methylated ß-cyclodextrin (CRYSMEB) with epichlorohydrin was carried out in the presence of a known amount of toluene as imprinting agent. Three different preparations (D1, D2 and D3) of imprinted polymers were obtained and characterized by solid-state (13)C NMR spectroscopy under cross-polarization magic angle spinning (CP-MAS) conditions. The polymers were prepared by using the same synthetic conditions but with different molar ratios of imprinting agent/monomer, leading to morphologically equivalent materials but with different absorption properties. The main purpose of the work was to find a suitable spectroscopic descriptor accounting for the different imprinting process in three homogeneous polymeric networks. The polymers were characterized by studying the kinetics of the cross-polarization process. This approach is based on variable contact time CP-MAS spectra, referred to as VCP-MAS. The analysis of the VCP-MAS spectra provided two relaxation parameters: T CH (the CP time constant) and T 1ρ (the proton spin-lattice relaxation time in the rotating frame). The results and the analysis presented in the paper pointed out that T CH is sensitive to the imprinting process, showing variations related to the toluene/cyclodextrin molar ratio used for the preparation of the materials. Conversely, the observed values of T 1ρ did not show dramatic variations with the imprinting protocol, but rather confirmed that the three polymers are morphologically similar. Thus the combined use of T CH and T 1ρ can be helpful for the characterization and fine tuning of imprinted polymeric matrices.

Self-assembly and intra-cluster reactions of erbium and ytterbium bis(2-ethylhexyl)sulfosuccinates in the gas phase.

RATIONALE: The study of surfactant organization in vacuum allows surfactant-surfactant interaction to be unveiled in the absence of surrounding solvent molecules. Knowledge on their chemical-physical properties may also lead to the definition of more efficient gas-phase carriers, air-cleaning agents and nanoreactors. In addition, the presence of lanthanide-group ions adds unique photochemical properties to surfactants. METHODS: The structural features, stability and fragmentation patterns of charged aggregates formed by lanthanide-functionalized surfactants, ytterbium and erbium bis(2-ethylhexyl)sulfosuccinate ((AOT)3Yb and (AOT)3Er), have been investigated by electrospray ionization mass spectrometry (ESI-MS), tandem mass spectrometry (ESI-MS/MS) and energy-resolved mass spectrometry (ER-MS). RESULTS: The experimental data indicate that the self-assembling of (AOT)3Yb and (AOT)3Er in the gas phase leads to the formation of a wide range of singly charged aggregates differing in their aggregation number, relative abundance and stability. In addition to specific effects on aggregate organization due to the presence of lanthanide ions, ER-MS experiments show rearrangements and in-cage reactions activated by collision, eventually including alkyl chain intra-cluster migration. CONCLUSIONS: Analysis of the experimental findings suggests that the observed chemical transformations occur within an organized supramolecular assembly rather than in a random association of components. The fragmentation pathways leading to the neutral loss of a fragment of nominal mass 534 Da, assigned as C28 H54 O7 S, from some positively charged aggregates has been rationalized.

Anomalous diffusion of Ibuprofen in cyclodextrin nanosponge hydrogels: an HRMAS NMR study.

Ibuprofen sodium salt (IP) was encapsulated in cyclodextrin nanosponges (CDNS) obtained by cross-linking of ß-cyclodextrin with ethylenediaminetetraacetic acid dianhydride (EDTAn) in two different preparations: CDNSEDTA 1:4 and 1:8, where the 1:n notation indicates the CD to EDTAn molar ratio. The entrapment of IP was achieved by swelling the two polymers with a 0.27 M solution of IP in D2O, leading to colourless, homogeneous hydrogels loaded with IP. The molecular environment and the transport properties of IP in the hydrogels were studied by high resolution magic angle spinning (HRMAS) NMR spectroscopy. The mean square displacement (MSD) of IP in the gels was obtained by a pulsed field gradient spin echo (PGSE) NMR pulse sequence at different observation times t d. The MSD is proportional to the observation time elevated to a scaling factor α. The α values define the normal Gaussian random motion (α = 1), or the anomalous diffusion (α < 1, subdiffusion, α > 1 superdiffusion). The experimental data here reported point out that IP undergoes subdiffusive regime in CDNSEDTA 1:4, while a slightly superdiffusive behaviour is observed in CDNSEDTA 1:8. The transition between the two dynamic regimes is triggered by the polymer structure. CDNSEDTA 1:4 is characterized by a nanoporous structure able to induce confinement effects on IP, thus causing subdiffusive random motion. CDNSEDTA 1:8 is characterized not only by nanopores, but also by dangling EDTA groups ending with ionized COO(-) groups. The negative potential provided by such groups to the polymer backbone is responsible for the acceleration effects on the IP anion thus leading to the superdiffusive behaviour observed. These results point out that HRMAS NMR spectroscopy is a powerful direct method for the assessment of the transport properties of a drug encapsulated in polymeric scaffolds. The diffusion properties of IP in CDNS can be modulated by suitable polymer synthesis; this finding opens the possibility to design suitable systems for drug delivery with predictable and desired drug release properties.

Promising Lipophilic PyTri Extractant for Selective Trivalent Actinide Separation from High Active Raffinate.

Within a spent nuclear fuel recycling strategy, in the past few years, the pyridine-bis-triazole unit was found to be rather effective and selective in minor actinide (MA) separation from synthetic high active raffinate (HAR). In this research work, the main features of the recently studied PTEH ligand were investigated in order to evaluate its potentialities in SANEX-like processes. Its applicability in advanced separation processes was demonstrated, even at process temperatures. It manifested satisfactory extraction properties for a successful selective An separation from Ln, easy cation release, and adequate extraction kinetics as well as outstanding hydrolytical and radiolytical stability. All the results collected in this work allowed the scientists on the committee of the H2020 GENIORS project to promote PTEH as a concrete alternative to the reference CyMe4-BTBP ligand.

Calcium acamprosate: a triclinic polymorph.

The title compound, poly[bis-(µ(3)-4-acetamido-propane-sulfon-ato)-calcium], [Ca(C(5)H(10)NO(4)S)(2)](n), is a triclinic polymorph of the previously reported monoclinic structure [Toffoli et al. (1988 ▶). Acta Cryst. C44, 1493-1494]. The triclinic modification was found to have an all-trans configuration of the acetamido-propane chain, in contrast with the monoclinic polymorph which shows an angle of 74.66 (8)° between the S-C-C-C chain plane and that of the amide group. The Ca(2+) cation is situated on an inversion centre and is hexa-coordinated by six O atoms belonging to different anions in a distorted octa-hedral geometry. This arrangement leads to a layered structure parallel to (011). The layers are held together by N-H⋯O hydrogen bonds and by short C-H⋯O inter-actions, both involving the sulfonate O atoms not coordinated to the Ca(2+) cations. The structure was determined from a crystal twinned by non-merohedry [twin law ([Formula: see text]00, 0[Formula: see text]0, -0.335 -0.85 1), with a fractional contribution of the minor twin domain of 46.7 (1)%].

Exploiting enzymatic regioselectivity: a facile methodology for the synthesis of polyhydroxylated hybrid compounds.

Polyhydroxylated hybrid molecules have been synthesized using a protocol based on the regioselective acylation of the target compounds with activated dicarboxylic acids catalyzed by Novozym-435. The procedure implies that the mixed ester derivatives prepared and isolated from the first esterification step act as acylating agents in the second esterification step.

An Integrated Approach to Optimizing Cellulose Mercerization.

An integrated approach, based on quantitative transmission mode powder X-ray diffraction (PXRD) combined with multivariate statistical analysis, has been applied to cellulose obtained from three different sources to correlate the mercerization degree and crystallinity with the cellulose type, temperature, and reaction time. The effects of the experimental conditions on the two outcomes were studied by design of experiments (DoE) and surface responding analysis (SRA) combined with principal component analysis (PCA). SRA showed a marked influence of the type of cellulose (wood cellulose from the kraft vs. sulfite process, WCK vs. WCS) on the conversion of cellulose I to cellulose II (CII%) during mercerization. A counterintuitive simultaneous effect of temperature and cellulose type was also highlighted. The data elaboration in the form of response surface plots provided an easy predictive tool for the optimum conditions to maximize the conversion. The simulation reported for WCK showed maximum conversion (96%) at 70 °C in 24 h with 18%wt NaOH.

Validating a strategy for molecular dynamics simulations of cyclodextrin inclusion complexes through single-crystal X-ray and NMR experimental data: a case study.

A theoretical and experimental study about the formation and structure of the inclusion complex (-)-menthyl-O-beta-D-glucopyranoside 1 with beta-cyclodextrin (beta-CD) 2 is presented as paradigmatic case study to test the results of molecular dynamics (MD) simulations. The customary methodological approach-the use of experimental geometrical parameters as restraints for MD runs-is logically reversed and the calculated structures are a posteriori compared with those obtained from NMR spectroscopy in D(2)O solution and single crystal X-ray diffraction so as to validate the simulation procedure. The guest molecule 1 allows for a broad repertoire of intermolecular interactions (dipolar, hydrophobic, hydrogen bonds) concurring to stabilize the host-guest complex, thus providing the general applicability of the simulation procedure to cyclodextrin physical chemistry. Many starting geometries of the host-guest association were chosen, not assuming any a priori inclusion. The simulation protocol, involving energy minimization and MD runs in explicit water, yielded four possible inclusion geometries, ruling out higher-energy outer adducts. By analysis of the average energy at room temperature, the most stable geometry in solution was eventually obtained, while the kinetics of formation showed that it is also kinetically favored. The reliability of such geometry was thoroughly checked against the NOE distances via the pair distribution functions, that is, the statistical distribution of intermolecular distances among selected diagnostic atoms calculated from the MD trajectories at room temperature. An analogous procedure was adopted both with implicit solvent and in vacuo. The most stable geometry matched that found with explicit solvent but major differences were observed in the relative stability of the metastable complexes as a consequence of the lack of hydration on the polar moiety of the guest. Finally, a control set of geometrical parameters of the thermodynamically favored complex matched the corresponding one obtained from the X-ray structure, while local conformational differences were indicative of packing effects.

Spectroscopic and structural investigation of the confinement of D and L dimethyl tartrate in lecithin reverse micelles.

The confinement of D and L dimethyl tartrate in lecithin reverse micelles dispersed in cyclohexane has been investigated by FT-IR, polarimetry, electronic and vibrational circular dichroism (ECD and VCD), 1H NMR, and small-angle X-ray scattering (SAXS). Measurements have been performed at room temperature as a function of the solubilizate-to-surfactant molar ratio (R) at fixed lecithin concentration. The analysis of experimental data indicates that the dimethyl tartrate molecules are solubilized within reverse micelles in proximity to the surfactant head groups in the same way for the D and L forms. The encapsulation of dimethyl tatrate within lecithin reverse micelles involves changes in its H-bonds, from what is observed in the pure solid or in CCl4 solutions; this is a consequence of the establishment of specific solute-surfactant headgroup interactions and of confinement effects. In the 0 < or = R < or = 1.7 range, SAXS profiles of dimethyl tartrate/lecithin/ cyclohexane micellar solutions are well-described by a model of interacting polydisperse spherical micellar cores whose mean radius does not change appreciably with R (i.e., it changes from about 18 to 20 angstroms). 1H NMR diffusion measurements of both dimethyl tartrates and lecithin were rationalized in terms of collective translational motions of the entire micellar aggregate and of their molecular diffusion among clusters of reverse micelles. The association of optically active lecithin with D and L dimethyl tartrate leads to the formation of self-organized supramolecular aggregates whose interesting chiroptical features are evidenced by polarimetry and CD.

Improving the recycling technology of waste cooking oils: Chemical fingerprint as tool for non-biodiesel application.

Samples of sunflower Waste Cooking Oils (WCOs) subjected to several cycles of frying were treated with water under four different combinations of temperature and pH. Several aspects of the chemical composition of edible, non-treated and processed samples was determined by three different analytic techniques: headspace Solid-Phase Microextraction (HS-SPME) coupled with gas-chromatography (GC), 1H NMR spectroscopy and ESI-MS spectrometry. Thus, a characteristic chemical fingerprint of each sample was derived and proposed as useful set of tools for the optimization of recycling of WCOs. On the basis of the presented results, a mini-plant for the production of bio-lubricants and bio-solvents with a circular economy approach was designed and herein described.

A Sustainable One-Pot, Two-Enzyme Synthesis of Naturally Occurring Arylalkyl Glucosides.

A sustainable, convenient, scalable, one-pot, two-enzyme method for the glucosylation of arylalkyl alcohols was developed. The reaction scheme is based on a transrutinosylation catalyzed by a rutinosidase from A. niger using the cheap commercially available natural flavonoid rutin as glycosyl donor, followed by selective "trimming" of the rutinoside unit catalyzed by a rhamnosidase from A. terreus. The process was validated with the syntheses of several natural bioactive glucosides, which could be isolated in up to 75 % yield without silica-gel chromatography.

Transport Properties of Ibuprofen Encapsulated in Cyclodextrin Nanosponge Hydrogels: A Proton HR-MAS NMR Spectroscopy Study.

The chemical cross-linking of ß-cyclodextrin (ß-CD) with ethylenediaminetetraacetic dianhydride (EDTA) led to branched polymers referred to as cyclodextrin nanosponges (CDNSEDTA). Two different preparations are described with 1:4 and 1:8 CD-EDTA molar ratios. The corresponding cross-linked polymers were contacted with 0.27 M aqueous solution of ibuprofen sodium salt (IP) leading to homogeneous, colorless, drug loaded hydrogels. The systems were characterized by high resolution magic angle spinning (HR-MAS) NMR spectroscopy. Pulsed field gradient spin echo (PGSE) NMR spectroscopy was used to determine the mean square displacement (MSD) of IP inside the polymeric gel at different observation times td. The data were further processed in order to study the time dependence of MSD: MSD = f(td). The proposed methodology is useful to characterize the different diffusion regimes that, in principle, the solute may experience inside the hydrogel, namely normal or anomalous diffusion. The full protocols including the polymer preparation and purification, the obtainment of drug-loaded hydrogels, the NMR sample preparation, the measurement of MSD by HR-MAS NMR spectroscopy and the final data processing to achieve the time dependence of MSD are here reported and discussed. The presented experiments represent a paradigmatic case and the data are discussed in terms of innovative approach to the characterization of the transport properties of an encapsulated guest within a polymeric host of potential application for drug delivery.

TEMPO-Oxidized Cellulose Cross-Linked with Branched Polyethyleneimine: Nanostructured Adsorbent Sponges for Water Remediation.

Adsorbent sponges for water remediation were prepared using TEMPO-oxidized cellulose nanofibers (TOCNFs) as three-dimensional scaffolds, and branched polyethyleneimine (bPEI, 25 KDa) as the cross-linking agent. TOCNFs were suspended in aqueous solution in the presence of variable amounts of bPEI. The mixtures were first freeze-dried and then thermally treated (from 60 to 102 °C over 10 h) promoting the formation of amide bonds between the carboxylic groups of TOCNF and the primary amines of bPEI. The resulting materials, which were characterized by FTIR and 13 C CP-MAS NMR spectroscopy, scanning electron microscopy, and elemental analysis, showed higher chemical and mechanical stability in water than non-reticulated cellulose composites. The high adsorption capability of the new sponges was verified for different organic pollutants (p-nitrophenol, 2,4,5-trichlorophenol, and amoxicillin), and heavy metal ion pollutants (Cu, Co, Ni, Cd), indicating their potential for water decontamination.

Structural and physicochemical characterization of the inclusion complexes of cyclomaltooligosaccharides (cyclodextrins) with melatonin.

The stoichiometry, geometry, stability, and solubility of the inclusion complexes of melatonin (MLT) with native cyclomaltooligosaccharides (alpha-, beta- or gamma-cyclodextrins, CDs) are determined experimentally by high-resolution NMR spectroscopy, calorimetric and solubility measurements, and mass spectrometry. The observed differences are discussed in terms of molecular recognition expression of the host-guest (h-g) interactions within the hydrophobic CDs cavities of different size. The 1:1 h-g stoichiometry in water solution prevails at low CD concentrations; the trend to form higher order associations is observed at increasing CD concentrations. The stability order beta-CD>gamma-CD>alpha-CD for the complexes in water solution and beta-CD>alpha-CD>gamma-CD for the protonated or alkali-cationated complexes in the gas phase are rationalized on the grounds of the structural data from NMR spectroscopy and of the thermodynamic parameters from calorimetric measurements.

2,9-Dicarbonyl-1,10-phenanthroline derivatives with an unprecedented Am(III)/Eu(III) selectivity under highly acidic conditions.

Four lipophilic 1,10-phenanthroline di(thio)amide, diester or diketone derivatives were studied as ligands for Am(III)/Eu(III) separation from acidic media. The synthesis of these compounds is reported together with the extraction tests in different solvents (kerosene, octanol and o-nitrophenyl hexyl ether), HNO3 concentrations and ratios between the ligand and the synergistic agent (Br-Cosan). The promising results obtained from the large number of solvent extraction tests carried out show that it might be possible to apply this class of ligands to advanced reprocessing of spent nuclear fuel. The experimental data indicate that, under the conditions that simulate the real radioactive waste, the extraction efficiency and Am/Eu separation factors are particularly high, thus suggesting that the combination of soft heterocyclic N-donor atoms and hard carbonyl groups of ester and amides affords a tetradentate donor set of atoms (ONNO) that gives rise to remarkable selectivities. ESI-MS studies and DFT calculations shed light on the possible structure of the Eu(3+) complexes indicating that the 1 : 1 : 2 (cation : ligand : anion) complex is slightly more stable than the 1 : 2 : 1 species.