RESUMEN
One of the greatest challenges with single-walled carbon nanotube (SWNT) photovoltaics and nanostructured devices is maintaining the nanotubes in their pristine state (i.e., devoid of aggregation and inhomogeneous doping) so that their unique spectroscopic and transport characteristics are preserved. To this effect, we report on the synthesis and self-assembly of a C60-functionalized flavin (FC60), composed of PCBM and isoalloxazine moieties attached on either ends of a linear, C-12 aliphatic spacer. Small amounts of FC60 (up to 3 molar %) were shown to coassembly with an organic soluble derivative of flavin (FC12) around SWNTs and impart effective dispersion and individualization. A key annealing step was necessary to perfect the isoalloxazine helix and expel the C60 moiety away from the nanotubes. Steady-state and transient absorption spectroscopy illustrate that 1% or higher incorporation of FC60 allows for an effective photoinduced charge transfer quenching of the encased SWNTs through the seamless helical encase. This is enabled via the direct π-π overlap between the graphene sidewalls, isoalloxazine helix, and the C60 cage that facilitates SWNT exciton dissociation and electron transfer to the PCBM moiety. Atomistic molecular simulations indicate that the stability of the complex originates from enhanced van der Waals interactions of the flexible spacer wrapped around the fullerene that brings the C60 in π-π overlap with the isoalloxazine helix. The remarkable spectral purity (in terms of narrow E(S)ii line widths) for the resulting ground-state complex signals a new class of highly organized supramolecular nanotube architecture with profound importance for advanced nanostructured devices.
Asunto(s)
Flavinas/química , Fulerenos/química , Nanotubos de Carbono/química , Simulación por Computador , Grafito/química , Indicadores y Reactivos , Modelos Moleculares , Conformación Molecular , Simulación de Dinámica Molecular , Procesos FotoquímicosRESUMEN
The foreign body reaction (FBR), one of the body's defense mechanisms against foreign materials, results in loss of implant biocompatibility. A popular strategy to prevent FBR is the constant release of dexamethasone in the tissue surrounding the implant. However, FBR prevention has not been sufficiently studied in large animal models, which offer a better representation of the human subcutaneous tissue physiology. Accordingly, a long-term strategy to prevent FBR to subcutaneous implants in a large animal model is necessary to translate the existing research for clinical applications. Here, a poly(lactic-co-glycolic) (PLGA) microsphere/poly(vinyl alcohol) (PVA) hydrogel composite coating for one-month prevention of FBR in Gottingen minipigs was developed. A modified PLGA microsphere formulation process is presented, that utilizes coprecipitation of dexamethasone and PLGA. Traditional methods result in heterogeneous distribution of large drug crystals in the microsphere matrix, which in turn results in low drug loading since the drug crystal size is close to that of the microspheres. The modified microsphere preparation method showed homogeneous distribution of dexamethasone, which in turn gave rise to increased drug loading, low burst release, and minimal lag phase. Elimination of the lag phase was dictated from previous work that compared FBR between rats and minipigs. The ability of the coatings to improve implant biocompatibility was successfully tested in vivo via histological examination of explanted tissue from the area surrounding the implants. The biocompatible coatings presented here are suitable for miniaturized implantable devices, such as biosensors, that require constant communication with the local microenvironment.
Asunto(s)
Antiinflamatorios/farmacología , Dexametasona/farmacología , Reacción a Cuerpo Extraño/prevención & control , Microesferas , Ácido Poliglicólico/química , Animales , Antiinflamatorios/química , Dexametasona/química , Femenino , Humanos , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Ácido Láctico/química , Modelos Animales , Alcohol Polivinílico/química , Prótesis e Implantes , Ratas , Porcinos , Porcinos EnanosRESUMEN
Integrated microfluidic devices with nanosized array electrodes and microfiltration capabilities can greatly increase sensitivity and enhance automation in immunoassay devices. In this contribution, we utilize the edge-patterning method of thin aluminum (Al) films in order to form nano- to micron-sized gaps. Evaporation of high work-function metals (i.e., Au, Ag, etc.) on these gaps, followed by Al lift-off, enables the formation of electrical uniform nanowires from low-cost, plastic-based, photomasks. By replacing Al with chromium (Cr), the formation of high resolution, custom-made photomasks that are ideal for low-cost fabrication of a plurality of array devices were realized. To demonstrate the feasibility of such Cr photomasks, SU-8 micro-pillar masters were formed and replicated into PDMS to produce micron-sized filters with 3-4 µm gaps and an aspect ratio of 3. These microfilters were capable of retaining 6 µm beads within a localized site, while allowing solvent flow. The combination of nanowire arrays and micro-pillar filtration opens new perspectives for rapid R&D screening of various microfluidic-based immunoassay geometries, where analyte pre-concentration and highly sensitive, electrochemical detection can be readily co-localized.
Asunto(s)
Aluminio/química , Inmunoensayo/instrumentación , Técnicas Analíticas Microfluídicas/instrumentación , Cromo/química , Nanocables/químicaRESUMEN
Establishing methods to accurately assess and model the binding strength of surfactants around a given-chirality single-walled carbon nanotube (SWNT) are crucial for selective enrichment, targeted functionalization, and spectrally sharp nanodevices. Unlike surfactant exchange, which is subject to interferences from the second surfactant, we herein introduce a thermal dissociation method based on reversible H(+)/O2 doping to determine SWNT/surfactant thermodynamic stability values with greater fidelity. Thermodynamic values were reproduced using molecular mechanics augmented by ab initio calculations in order to better assess π-π interactions. This afforded detailed quantification of the flavin binding strength in terms of π-π stacking (55-58%), with the remaining portion roughly split 3:1 between electrostatic plus van der Waals flavin mononucleotide (FMN) interdigitation and H-bonding interactions, respectively. Quasi-epitaxial π-π alignment between the near-armchair FMN helix and the underlying nanotube lattice plays a crucial role in stabilizing these assemblies. The close resemblance of the thermal dissociation method to helix-coil and ligand-binding transitions of DNA opens up a unique insight into the molecular engineering of self-organizing surfactants around various-chirality nanotubes.
Asunto(s)
Dinitrocresoles/química , Nanotubos de Carbono/química , Termodinámica , Conformación Molecular , Simulación de Dinámica Molecular , Teoría Cuántica , Electricidad EstáticaRESUMEN
Implantable sensors for continuous glucose monitoring hold great potential for optimal diabetes management. This is often undermined by a variety of issues associated with: (1) negative tissue response; (2) poor sensor performance; and (3) lack of device miniaturization needed to reduce implantation trauma. Herein, we report our initial results towards constructing an implantable device that simultaneously address all three aforementioned issues. In terms of device miniaturization, a highly miniaturized CMOS (complementary metal-oxide-semiconductor) potentiostat and signal processing unit was employed (with a combined area of 0.665 mm(2)). The signal processing unit converts the current generated by a transcutaneous, Clark-type amperometric sensor to output frequency in a linear fashion. The Clark-type amperometric sensor employs stratification of five functional layers to attain a well-balanced mass transfer which in turn yields a linear sensor response from 0 to 25 mM of glucose concentration, well beyond the physiologically observed (2 to 22 mM) range. In addition, it is coated with a thick polyvinyl alcohol (PVA) hydrogel with embedded poly(lactic-co-glycolic acid) (PLGA) microspheres intended to provide continuous, localized delivery of dexamethasone to suppress inflammation and fibrosis. In vivo evaluation in rat model has shown that the transcutaneous sensor system reproducibly tracks repeated glycemic events. Clarke's error grid analysis on the as-obtained glycemic data has indicated that all of the measured glucose readings fell in the desired Zones A & B and none fell in the erroneous Zones C, D and E. Such reproducible operation of the transcutaneous sensor system, together with low power (140 µW) consumption and capability for current-to-frequency conversion renders this a versatile platform for continuous glucose monitoring and other biomedical sensing devices.
Asunto(s)
Automonitorización de la Glucosa Sanguínea/instrumentación , Glucosa/análisis , Miniaturización/instrumentación , Prótesis e Implantes , Piel , Animales , Técnicas Biosensibles , Electroquímica , Ácido Láctico/química , Masculino , Metales/química , Óxidos/química , Ácido Poliglicólico/química , Copolímero de Ácido Poliláctico-Ácido Poliglicólico , Alcohol Polivinílico/química , Ratas , Ratas Sprague-Dawley , SemiconductoresRESUMEN
BACKGROUND: The objective of this work is to develop a highly miniaturized, low-power, biosensing platform for continuous glucose monitoring (CGM). This platform is based on an application-specific integrated circuit (ASIC) chip that interfaces with an amperometric glucose-sensing element. To reduce both size and power requirements, this custom ASIC chip was implemented using 65-nm complementary metal oxide semiconductor (CMOS) technology node. Interfacing this chip to a frequency-counting microprocessor with storage capabilities, a miniaturized transcutaneous CGM system can be constructed for small laboratory animals, with long battery life. METHOD: A 0.45 mm × 1.12 mm custom ASIC chip was first designed and implemented using the Taiwan Semiconductor Manufacturing Company (TSMC) 65-nm CMOS technology node. This ASIC chip was then interfaced with a multi-layer amperometric glucose-sensing element and a frequency-counting microprocessor with storage capabilities. Variation in glucose levels generates a linear increase in frequency response of this ASIC chip. In vivo experiments were conducted in healthy Sprague Dawley rats. RESULTS: This highly miniaturized, 65-nm custom ASIC chip has an overall power consumption of circa 36 µW. In vitro testing shows that this ASIC chip produces a linear (R2 = 99.5) frequency response to varying glucose levels (from 2 to 25 mM), with a sensitivity of 1278 Hz/mM. In vivo testing in unrestrained healthy rats demonstrated long-term CGM (six days/per charge) with rapid glucose response to glycemic variations induced by isoflurane anesthesia and tail vein injection. CONCLUSIONS: The miniature footprint of the biosensor platform, together with its low-power consumption, renders this CMOS ASIC chip a versatile platform for a variety of highly miniaturized devices, intended to improve the quality of life of patients with type 1 and type 2 diabetes.
RESUMEN
In order to truly unlock advanced applications of single-walled carbon nanotubes (SWNTs), one needs to separate them according to both chirality and handedness. Here we show that the chiral D-ribityl phosphate chain of flavin mononucleotide (FMN) induces a right-handed helix that enriches the left-handed SWNTs for all suspended (n,m) species. Such enantioselectivity stems from the sp(3) hybridization of the N atom anchoring the sugar moiety to the flavin ring. This produces two FMN conformations (syn and anti) analogous to DNA. Electrostatic interactions between the neighboring uracil moiety and the 2'-OH group of the side chain provide greater stability to the anti-FMN conformation that leads to a right-handed FMN helix. The right-handed twist that the FMN helix imposes to the underlying nanotube, similar to "Indian burn", causes diameter dilation of only the left-handed SWNTs, whose improved intermolecular interactions with the overlaying FMN helix, impart enantioselection.
Asunto(s)
Mononucleótido de Flavina/química , Modelos Biológicos , Nanotubos de Carbono/química , Dicroismo Circular , Enlace de Hidrógeno , Estructura Secundaria de Proteína , EstereoisomerismoRESUMEN
The performance of implantable electrochemical glucose sensors is highly dependent on the flux-limiting (glucose, H(2)O(2), O(2)) properties of their outer membranes. A careful understanding of the diffusion profiles of the participating species throughout the sensor architecture (enzyme and membrane layer) plays a crucial role in designing a robust sensor for both in vitro and in vivo operation. This paper reports the results from the mathematical modeling of Clark's first generation amperometric glucose sensor coated with layer-by-layer assembled outer membranes in order to obtain and compare the diffusion profiles of various participating species and their effect on sensor performance. Devices coated with highly glucose permeable (HAs/Fe(3+)) membranes were compared with devices coated with PSS/PDDA membranes, which have an order of magnitude lower permeability. The simulation showed that the low glucose permeable membrane (PSS/PDDA) sensors exhibited a 27% higher amperometric response than the high glucose permeable (HAs/Fe(3+)) sensors. Upon closer inspection of H(2)O(2)diffusion profiles, this non-typical higher response from PSS/PDDA is not due to either a larger glucose flux or comparatively larger O(2) concentrations within the sensor geometry, but rather is attributed to a 48% higher H(2)O(2) concentration in the glucose oxidase enzyme layer of PSS/PDDA coated sensors as compared to HAs/Fe(3+) coated ones. These simulated results corroborate our experimental findings reported previously. The high concentration of H(2)O(2) in the PSS/PDDA coated sensors is due to the low permeability of H(2)O(2) through the PSS/PDDA membrane, which also led to an undesired increase in sensor response time. Additionally, it was found that this phenomenon occurs for all enzyme thicknesses investigated (15, 20 and 25 nm), signifying the need for a holistic approach in designing outer membranes for amperometric biosensors.
Asunto(s)
Técnicas Biosensibles/instrumentación , Materiales Biocompatibles Revestidos/química , Glucosa/análisis , Modelos Teóricos , Electrodos Implantados , Humanos , Bombas de Infusión Implantables , Sistemas de Infusión de Insulina , Membranas ArtificialesRESUMEN
Polarization of low-lying excitonic bands in finite-size semiconducting single-walled carbon nanotubes (SWNTs) is studied by using quantum-chemical methodologies. Our calculations elucidate properties of cross-polarized excitons, which lead to the transverse optical absorption of nanotubes and presumably couple to intermediate-frequency modes recently observed in resonance Raman excitation spectroscopy. We identify up to 12 distinct excitonic transitions below the second fundamental band associated with the E(22) van Hove singularity. Calculations for several chiral SWNTs distinguish the optically active "bright" excitonic band polarized parallel to the tube axis and several optically "weak" cross-polarized excitons. The rest are optically (near) forbidden "dark" transitions. An analysis of the transition density matrices related to excitonic bands provides detailed information about delocalization of excitonic wavefunction along the tube. Utilization of the natural helical coordinate system accounting for the tube chirality allows one to disentangle longitudinal and circumferential components. The distribution of the transition density matrix along a tube axis is similar for all excitons. However, four parallel-polarized excitons associated with the E(11) transition are more localized along the circumference of a tube, compared with others related to the E(12) and E(21) cross-polarized transitions. Calculated splitting between optically active parallel- and cross-polarized transitions increases with tube diameter, which compares well with experimental spectroscopic data.
RESUMEN
The role of oxygen in directing the low temperature (125 degrees C), redox-assisted, unidimensional and unidirectional growth of CdSe nanocrystals (NCs) was investigated. In the presence of oxygen, CdSe quantum dots grow selectively along their c axis with little to no change in their width. Reduction of oxygen in the growth medium results in three-dimensional growth. Moreover the one-dimensional growth was found to occur only from one of the two inequivalent polar (0001) facets, as supported by the seeded growth of Cd(x)Hg(1-x)Se onto CdSe seeds. This is in agreement with density functional theory simulations, which indicate that due to selective oxygen passivation growth can occur only along the [0001] direction. The ability to control seeded NC growth with respect to morphology and directionality opens new possibilities toward the low temperature synthesis of complex nanostructures.
Asunto(s)
Compuestos de Cadmio/química , Nanopartículas del Metal/química , Nanotecnología/métodos , Oxidación-Reducción , Oxígeno/química , Puntos Cuánticos , Compuestos de Selenio/química , Frío , Cristalización , Microscopía Electrónica de Transmisión/métodos , Modelos Químicos , TemperaturaRESUMEN
BACKGROUND: An anti-inflammatory drug-loaded composite coating (dexamethasone-loaded poly (lactic-co-glycolic acid) [PLGA] microspheres/polyvinyl alcohol [PVA] hydrogel) was previously developed to counter the foreign body reaction to a fully implantable continuous glucose monitoring biosensor. The long-term sensor functionality was ensured in the presence of the drug-loaded composite coating thus facilitating better diabetes control and management. In order to advance such a drug-device combination product toward clinical testing, addressing sterilization remains a key step due to the heterogeneity of the product components. The main objective of this research was to investigate the effect of two terminal sterilization techniques: gamma radiation and ethylene oxide (EO) on the stability of the anti-inflammatory coatings as well as retention of the glucose sensing ability of the implantable sensor. METHOD: The composite coatings, their individual components, and the glucose-sensing elements of the biosensor were subjected to low-temperature gamma radiation and EO cycles. Detailed characterization was conducted on all components before and after sterilization. RESULTS: Exposure to gamma radiation affected dexamethasone crystallinity and glucose response linearity of the sensing element, whereas physical aging of microspheres in composite coatings was observed poststerilization with EO. Despite these effects, dexamethasone drug release from coatings was not significantly affected by either technique. CONCLUSION: The research findings indicate that both sterilization techniques are feasible for the sterilization of the dexamethasone-loaded PLGA microspheres/PVA hydrogel composite coatings, while EO was preferred for the sterilization of the glucose-sensing element of the biosensor.
Asunto(s)
Técnicas Biosensibles , Preparaciones Farmacéuticas , Glucemia , Automonitorización de la Glucosa Sanguínea , Dexametasona , Glucosa , Humanos , Ácido Láctico , Microesferas , Ácido Poliglicólico , Copolímero de Ácido Poliláctico-Ácido Poliglicólico , EsterilizaciónRESUMEN
Electrochemical immunosensors using vertically aligned single wall carbon nanotube (SWNT) forests can provide ultrasensitive, accurate cancer biomarker protein assays. Herein we report a systematic investigation of the structure, thickness, and functionality of each layer of these immunosensors using atomic force microscopy (AFM), quartz crystal microbalance (QCM), and scanning white light interferometry (SWLI). This provides a detailed picture of the surface morphology of each layer along with surface concentration and thickness of each protein layer. Results reveal that the major reasons for sensitivity gain can be assigned to the dense packing of carboxylated SWNT forest tips, which translate to a large surface concentration of capture antibodies, together with the high quality of conductive SWNT forests.
Asunto(s)
Técnicas Biosensibles/métodos , Inmunoensayo/métodos , Nanotubos de Carbono/química , Proteínas/análisis , Animales , Bovinos , Humanos , Interferometría , Microscopía de Fuerza Atómica , Proteínas/inmunología , Tecnicas de Microbalanza del Cristal de Cuarzo , Espectrometría Raman , Propiedades de SuperficieRESUMEN
In this study, drug carrier properties through skin and penetration enhancement effects of carbon nanotubes (CNTs) are presented. Multi-walled and double-walled carbon nanotubes were used. Penetration enhancement into the skin following passive diffusion and iontophoresis were determined. Possible solubility enhancement effects and drug adsorption properties of CNTs were investigated. CNTs were found to be a useful drug carrier system and they can provide a high loading and enhanced transdermal penetration for especially hydrophobic drugs. The electroconductive nature of CNTs allows easy application of iontophoresis and the additional advantage of CNTs appears to be using them as electrodes.
Asunto(s)
Administración Cutánea , Nanotubos de Carbono/química , Animales , Antiinflamatorios no Esteroideos/administración & dosificación , Antibióticos Antineoplásicos/administración & dosificación , Antibióticos Antineoplásicos/farmacocinética , Cromatografía Líquida de Alta Presión , Cámaras de Difusión de Cultivos , Doxorrubicina/administración & dosificación , Doxorrubicina/farmacocinética , Portadores de Fármacos/química , Oído Externo/metabolismo , Electrodos , Concentración de Iones de Hidrógeno , Técnicas In Vitro , Indometacina/administración & dosificación , Iontoforesis/instrumentación , Microscopía de Fuerza Atómica , Microscopía Electrónica de Rastreo , Polietilenglicoles/química , Ratas , Absorción Cutánea , Solubilidad , Porcinos , TermogravimetríaRESUMEN
Utilization of single-walled carbon nanotubes (SWNTs) in high-end applications hinges on separating metallic (met-) from semiconducting (sem-) SWNTs. Surfactant amines, like octadecylamine (ODA) have proven instrumental for the selective extraction of sem-SWNTs from tetrahydrofuran (THF) nanotube suspensions. The chemical shift differences along the tail of an asymmetric, diacetylenic surfactant amine were used to probe the molecular dynamics in the presence and absence of nanotubes via NMR. The results suggest that the surfactant amine head is firmly immobilized onto the nanotube surface together with acidic water, while the aliphatic tail progressively gains larger mobility as it gets farther from the SWNT. X-ray and high-resolution TEM studies indicate that the sem-enriched sample is populated mainly by small nanotube bundles containing ca. three SWNTs. Molecular simulations in conjunction with previously determined HNO(3)/H(2)SO(4) oxidation depths for met- and sem-SWNTs indicate that the strong pinning of the amine surfactants on the sem-enriched SWNTs bundles is a result of a well-ordered arrangement of nitrate/amine salts separated with a monomolecular layer of H(2)O. Such continuous 2D arrangement of nitrate/amine salts shields the local environment adjacent to sem-enriched SWNTs bundles and maintains an acidic pH that preserves nanotube oxidation (i.e., SWNT(n+)). This, in turn, results in strong interactions with charge-balancing NO(3)(-) counterions that through their association with neutralized surfactant amines provide effective THF dispersion and consequent sem enrichment.
Asunto(s)
Aminas/química , Nanotubos de Carbono/química , Puntos Cuánticos , Tensoactivos/química , Rastreo Diferencial de Calorimetría , Espectroscopía de Resonancia Magnética , Microscopía Electrónica de Transmisión , Difracción de Rayos XRESUMEN
The efficiency of nonviral vectors for gene delivery may be enhanced by understanding the key barriers that limit the translocation of the therapeutic DNA into the nucleus. One such barrier is the instability of DNA in the cytoplasm. In this work, we have developed a method to dual-label plasmid DNA to be utilized as a tool to elucidate DNA instability during its trafficking in the intracellular microenvironment. Plasmid DNA containing rhodamine and maleimide groups linked using peptide nucleic acid (PNA) linkers was utilized for conjugation. Covalent conjugation of the maleimide group with a second fluorophore, fluorescein, did not alter the electrophoretic mobility or the structural integrity of the DNA, as confirmed by gel electrophoresis. The intact DNA was visualized as a single color (yellow) due to the close proximity of the green and red fluorophores. DNA degradation was simulated using restriction endonucleases (BamH1 and PflMI) to cut the DNA at two or more sites resulting in color separation. Confocal time-lapse imaging was utilized to follow DNA stability upon incubation of Lipofectamine2000/dual-labeled DNA complexes in CHO-K1 cells. Yellow fluorescent voxels were seen in the cell cytoplasm indicating the presence of intact DNA. Red and green fluorescent voxels were also seen in a few cells, suggesting separation of the fluorophores and probable DNA degradation. The methodology developed in this report provides a new tracking tool for investigators to explore DNA degradation at the molecular level inside single cell.
Asunto(s)
Colorantes Fluorescentes , Técnicas de Sonda Molecular , Plásmidos/metabolismo , Transfección/normas , Animales , Células CHO , Cricetinae , Cricetulus , Plásmidos/administración & dosificaciónRESUMEN
We report herein a simple device for rapid biosensing consisting of a single microfluidic channel made from poly(dimethylsiloxane) (PDMS) coupled to an injector, and incorporating a biocatalytic sensing electrode, reference and counter electrodes. The sensing electrode was a gold wire coated with 5 nm glutathione-decorated gold nanoparticles (AuNPs). Sensitive detection of H(2)O(2) based on direct bioelectrocatalysis by horseradish peroxidase (HRP) was used for evaluation. HRP was covalently linked the glutathione-AuNPs. This electrode presented quasi-reversible cyclic voltammetry peaks at -0.01 V vs Ag/AgCl at pH 6.5 for the HRP heme Fe(III)/Fe(II) couple. Direct electrochemical activity of HRP was used to detect H(2)O(2) at high sensitivity with a detection limit of 5 nM in an unmediated system.
RESUMEN
Characterization studies of a multi-enzyme-antibody-carbon nanotube bioconjugate designed for the amplification of electrochemical immunosensing are described. Secondary antibodies for prostate specific antigen (PSA) were covalently linked to highly carboxylated multi-walled carbon nanotube (CNT) along with multiple horseradish peroxidase (HRP) enzyme labels. These bioconjugates provide ultra-sensitive amperometric detection of PSA on a single-wall carbon nanotube forest sandwich immunosensor platform. A single layer of HRP on the surface of the CNT was suggested by images from atomic force microscopy (AFM) and transmission electron microscopy (TEM). HRP on the bioconjugate surface was visualized by confocal microscopy using in-situ HRP-catalyzed polymerization yielding a fluorescent product, and HRP activity was estimated in a conventional assay. Binding of quantum-dot labeled PSA to antibodies on the bioconjugate was used for visualization by TEM. Combining TEM and enzyme activity results gave estimates of approximately 82 HRPs and 30 +/- 15 secondary antibodies per 100 nm of antibody-HRP-CNT bioconjugate.
Asunto(s)
Complejo Antígeno-Anticuerpo/análisis , Técnicas Biosensibles/instrumentación , Peroxidasa de Rábano Silvestre/química , Inmunoensayo/instrumentación , Nanotecnología/instrumentación , Nanotubos de Carbono/química , Enzimas Inmovilizadas/química , Diseño de Equipo , Análisis de Falla de Equipo , Nanotecnología/métodosRESUMEN
In this contribution, we describe the synthesis and covalent attachment of an analogue of the flavin mononucleotide (FMN) cofactor onto carboxylic functionalities of single-walled carbon nanotubes (SWNTs). The synthesis of FMN derivative (12) was possible by coupling flavin H-phosphonate (9) with an aliphatic alcohol, using a previously unreported N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride coupling. We found that the flavin moiety of 12-SWNT shows a strong pi-pi interaction with the nanotube side-walls. This leads to a collapsed FMN configuration that quenches flavin photoluminescence (PL). The treatment of 12-SWNT with sodium dodecyl sulfate (SDS) overcomes this strong nanotube/isoalloxazine interaction and restores the FMN into extended conformation that recovers its luminescence. In addition, redox cycling as well as extended sonication were proven capable to temporally restore PL as well. Cyclic voltammetry of FMN onto SWNT forests indicated profound differences for the extended and collapsed FMN configurations in relation to oxygenated nanotube functionalities that act as mediators. These findings provide a fundamental understanding for flavin-related SWNT nanostructures that could ultimately find a number of usages in nanotube-mediated biosensing devices.
Asunto(s)
Mononucleótido de Flavina/química , Nanotubos de Carbono/química , Técnicas Biosensibles , Etildimetilaminopropil Carbodiimida/química , Conformación Molecular , Oxidación-ReducciónRESUMEN
The application of dexamethasone releasing poly (lactic-co-glycolic acid) (PLGA) microspheres embedded in a poly vinyl alcohol (PVA) hydrogel coatings have been successfully used in the suppression of the foreign body response (FBR) to implantable glucose sensors. In the current study, dexamethasone-loaded PLGA microspheres were prepared by blending two types of PLGA polymers (RG503H and DLG7E with MW of ca. 25â¯kDa and 113â¯kDa, respectively) to achieve long-term (6â¯months) inhibition of the FBR. The microsphere composition was optimized according to the in vitro drug release profiles. Microspheres with DLG7E/RG503H/dexamethasoneâ¯=â¯70/13.3/16.7â¯wt% composition, when embedded in a PVA hydrogel, provided a continuous drug release for 6â¯months. By combining the aforementioned microspheres with microspheres composed solely of the DLG7E polymer within a similar PVA hydrogel realized an even longer (>7â¯months) in vitro drug release. A heat map was constructed to depict the daily in vitro drug released and elucidate possible lag phases that could affect the pharmacodynamic response. These drug-loaded implant coatings were investigated in vivo (rat model) and showed inhibition of the foreign body response for 6â¯months. These results suggest that the minimum effective daily dose to counter chronic inflammation is ca. 0.1⯵g per mg of coating surrounding a 0.5â¯×â¯0.5â¯×â¯5â¯mm silicon implant (dummy sensor). Accordingly, these drug-eluting composite coatings can ensure long-term inflammation control for miniaturized implantable devices.