Controlled Synthesis of Dendrite-like Polyglycerols Using Aluminum Complex for Biomedical Applications.

This work describes a one-pot synthesis of dendrite-like hyperbranched polyglycerols (HPGs) via a ring-opening multibranching polymerization (ROMBP) process using a bis(5,7-dichloro-2-methyl-8-quinolinolato)methyl aluminum complex (1) as a catalyst and 1,1,1-tris(hydroxymethyl)propane/trimethylol propane (TMP) as an initiator. Single-crystal X-ray diffraction (XRD) analysis was used to elucidate the molecular structure of complex 1. Inverse-gated (IG)13C NMR analysis of HPGs showed degree of branching between 0.50 and 0.57. Gel permeation chromatography (GPC) analysis of the HPG polymers provided low, medium, and high-molecular weight (M n) polymers ranging from 14 to 73 kDa and molecular weight distributions (M w/M n) between 1.16 and 1.35. The obtained HPGs exhibited high wettability with water contact angle between 18 and 21° and T g ranging between -39 and -55 °C. Notably, ancillary ligand-supported aluminum complexes as catalysts for HPG polymerization reactions have not been reported to date. The obtained HPG polymers in the presence of the aluminum complex (1) can be used for various biomedical applications. Here, nanocomposite electrospun fibers were fabricated with synthesized HPG polymer. The nanofibers were subjected to cell culture experiments to evaluate cytocompatibility behavior with L929 and MG63 cells. The cytocompatibility studies of HPG polymer and nanocomposite scaffold showed high cell viability and spreading. The study results concluded, synthesized HPG polymers and composite nanofibers can be used for various biomedical applications.

Atmospheric-Pressure Conversion of CO2 to Cyclic Carbonates over Constrained Dinuclear Iron Catalysts.

The conversion of CO2 and epoxides to cyclic carbonates over a silica-supported di-iron(III) complex having a reduced Robson macrocycle ligand system is shown to proceed at 1 atm and 80 °C, exclusively producing the cis-cyclohexene carbonate from cyclohexene oxide. We examine the effect of immobilization configuration to show that the complex grafted in a semirigid configuration catalytically outperforms the rigid, flexible configurations and even the homogeneous counterparts. Using the semirigid catalyst, we are able to obtain a TON of up to 800 and a TOF of up to 37 h-1 under 1 atm CO2. The catalyst is shown to be recyclable with only minor leaching and no change to product selectivity. We further examine a range of epoxides with varying electron-withdrawing/donating properties. This work highlights the benefit arising from the constraining effect of a solid surface, akin to the role of hydrogen bonds in enzyme catalysts, and the importance of correctly balancing it.

A rare 4-fold interpenetrated metal-organic framework constructed from an anionic indium-based node and a cationic dicopper linker.

A unique 4-fold interpenetrated metal-organic framework, TIF-1, was synthesized by combining an anionic indium node with a cationic linker. This framework shows a rare type of 4-fold interpenetrated dia network, constructed from tessellation of biangular and tetragonal type metal-organic micropores. The porosity of TIF-1 is moderate due to four-fold interpenetration and charge-balancing anions. The cationic feature of this MOF may give good efficiency for selective small anion exchange or separation. In addition, the thermal stability and moderate CO2 adsorption property of the complex were studied.

Recent trends in biodegradable polyester nanomaterials for cancer therapy.

Biodegradable polyester nanomaterials-based drug delivery vehicles (DDVs) have been largely used in most of the cancer treatments due to its high biological performance and wider applications. In several previous studies, various biodegradable and biocompatible polyester backbones were used which are poly(lactic acid) (PLA), poly(ε-caprolactone) (PCL), poly(propylene fumarate) (PPF), poly(lactic-co-glycolic acid) (PLGA), poly(propylene carbonate) (PPC), polyhydroxyalkanoates (PHA), and poly(butylene succinate) (PBS). These polyesters were fabricated into therapeutic nanoparticles that carry drug molecules to the target site during the cancer disease treatment. In this review, we elaborately discussed the chemical synthesis of different synthetic polyesters and their use as nanodrug carriers (NCs) in cancer treatment. Further, we highlighted in brief the recent developments of metal-free semi-aromatic polyester nanomaterials along with its role as cancer drug delivery vehicles.

Metal-free semi-aromatic polyester as nanodrug carrier: A novel tumor targeting drug delivery vehicle for potential clinical application.

Polyester nanomaterials have been widely used in drug delivey application from a longer period of time. This study reports the synthesis of metal-free semi-aromatic polyester (SAP) nanomaterial for drug delivery and evaluate its in vivo acute and systemic toxicity for potential clinical application. The ring opening coplymerization of commercially available cyclohexene oxide (CHO) and phthalic anhydride (PA) monomers was carried out to synthesize fully alternating poly(CHO-co-PA) copolymer using metal-free activators. The obtained low Mn SAP was found to be biocompatible, hemocompataible and biodegradable nature. This copolymer was first-time used to fabricate curcumin (CUR) loaded nanoparticles (NPs). These NPs were physicochemically characterized by thermogravimetric analyzer (TGA), X-ray diffraction (XRD), and UV/visible spectrophotometer analysis. Further, these negatively charged core-shell spherical NPs exhibited slow sustained release behavior of CUR with anomalous transport and further displayed its higher intracellular uptake in SiHa cells at different time-periods compared to free CUR. In vitro anti-cancer therapeutic effects of free CUR and poly(CHO-alt-PA)-CUR NPs were evaluated on different cancer cells. We observed the increased cytotoxicity of CUR NPs with low IC50 values compared to free CUR. These results were further substantiated with ex vivo data where, a significant reduction was observed in CUR NPs treated tumor spheroid's size as compared to free CUR. Furthermore, the different doses of metal-free poly(CHO-alt-PA) nanomaterial were tested for its acute and systemic toxicity in BALB/c mice. We did not observe any significant toxicity of tested nanomaterial on vital organs, blood cells and the body weight of mice. Our study suggest that this metal-free SAP nanomaterial can be used for potential clinical application.

Self-assembled dual-drug loaded core-shell nanoparticles based on metal-free fully alternating polyester for cancer theranostics.

Recent research has been directed to the use of biocompatible and biodegradable metal-free fully alternating polyester nanomaterial in drug delivery application. The practice of triethyl borane (Et3B)/Bis(triphenylphosphoranylidene)ammonium chloride (PPNCl) Lewis pair as non-metallic catalyst was carried out to synthesize alternating copolymer of commercially available tert-butyl glycidyl ether (tBGE) and phthalic anhydride (PA) (poly(tBGE-alt-PA) copolymer) of low Mnvia nearly controlled ring-opening copolymerization (ROCOP) reaction. This biocompatible, hemocompatible, and biodegradable copolymer was used in the fabrication of different nanodrug formulations (NDFs) loaded with doxorubicin (DOX), curcumin (CUR) and their combination. Transmission electron microscope (TEM) imaging showed the spherical shape and core-shell internal structure for all NDFs with an average particle diameter ranging between 200 and 250 nm. X-ray diffraction (XRD) analysis displayed the amorphous nature of both DOX and CUR after their entrapment into the copolymer matrix. Differential scanning colorimetry (DSC) analysis presented no potential chemical interactions between the drug and copolymer. The cellular drug uptake study showed the increased uptake for all NDFs compared to free drug and exhibited higher DOX and CUR accumulation in dual-drug loaded nanoparticles treated pancreatic cancer (MIA PaCa-2) cells. The in vitro drug release kinetic study displayed the slow sustained drug release behavior with anomalous transport for both DOX and CUR in a defined physiological environment. Further, the anti-tumor efficacy of all NDFs was examined on several different cancer cell lines and maximum cytotoxicity was observed in MIA PaCa-2 cells with low inhibitory concentration (IC50) values. These NDFs inhibited the proliferation of MIA PaCa-2 cells due to cell cycle arrest in G2/M phase. In result, MIA PaCa-2 cells underwent apoptosis with significant changes in mitochondrial membrane potential and increased reactive oxygen species (ROS) level. In future, this study will open several novel insights related to the use of such biocompatible and biodegradable metal-free polyesters in targeted drug delivery, tissue engineering and other biomedical applications.

Nb and Ta benzotriazole or benzoxazole phenoxide complexes as catalysts for the ring-opening polymerization of glycidol to synthesize hyperbranched polyglycerols.

A series of novel mononuclear (1a-7a and 1b-6b) as well as tetranuclear (8a and 9a) niobium (Nb) and tantalum (Ta) complexes of benzotriazole or benzoxazole phenoxide pro-ligands bearing different substituents at the ortho and para positions of the phenol rings were synthesized and characterized. The reaction of NbCl5 or TaCl5 with one equivalent of benzotriazole or benzoxazole phenoxide pro-ligands (L1H-L6H) in dry toluene or chloroform produced the corresponding chloride (1a-6a and 1b-6b) and ethoxy (7a) mononuclear Nb and Ta complexes in high yields. Furthermore, from the mononuclear Nb complexes (1a or 4a), a new structural form of tetrameric niobium complexes (8a and 9a) was synthesized through a controlled hydrolysis reaction. The molecular structures of complexes 1b, 4b, 7a, 8a and 9a were unambiguously confirmed by single crystal X-ray diffraction analyses. Furthermore, all these complexes (1a-9a and 1b-6b) were tested as catalysts for the ring-opening polymerisation (ROP) of glycidol to synthesize hyperbranched polyglycerols (HPG) by using 1,1,1-tris(hydroxymethyl)propane (TMP) as an initiator. The degree of branching (DB) observed was 0.30-0.54, which is an indication of hyperbranched structures. In particular, for the niobium complex with electron-withdrawing substituents on the benzoxazole phenoxide pro-ligand (5a), we achieved superior behavior for the ROP of glycidol in terms of activity, control of molecular weight (Mn) and molecular weight distributions (MWDs) (92% of glycidol to HPG, Mn = 10.52 kg mol-1, MWDs <1.33, DB = 0.53 and Tg = -57 °C). A highly hydrophilic nature was observed for the synthesized HPG polymer by water contact angle measurement (20° to 35°).

Synthesis and characterization of curcumin loaded PLA-Hyperbranched polyglycerol electrospun blend for wound dressing applications.

This study is aimed to develop curcumin (Cur) incorporated electrospun nanofibers of a blend of poly (lactic acid) (PLA) and hyperbranched polyglycerol (HPG) for wound healing applications. Both the polymers are synthesized and fabricated by electrospinning technique. The produced nanofibers were characterized by Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Differential Scanning Colorimetry (DSC) and Thermogravimetric Analysis (TGA). Electrospun scaffolds (PLA/HPG/Cur) exhibits very high hydrophilicity, high swelling and drug uptake and promotes better cell viability, adhesion and proliferation when compared to PLA/Cur electrospun nanofibers. Biodegradation study revealed that the morphology of the nanofibers were unaffected even after 14days immersion in Phosphate Buffered Saline. In vitro scratch assay indicates that migration of the cells in the scratch treated with PLA/HPG/Cur is complete within 36h. These results suggest that PLA/HPG/Cur nanofibers can be a potential wound patch dressing for acute and chronic wound applications.

Group IV complexes containing the benzotriazole phenoxide ligand as catalysts for the ring-opening polymerization of lactides, epoxides and as precatalysts for the polymerization of ethylene.

A series of Ti(IV), Zr(IV) and Hf(IV) benzotriazole phenoxide (BTP) complexes were synthesized and characterized by various spectroscopic techniques, elemental analysis and X-ray crystallography. The monosubstituted Zr(IV) BTP complexes [(µ-L)Zr(O(i)Pr)3]2 1-3 [L = (C1)BTP-H (1), (TCl)BTP-H (2), (pent)BTP-H (3)] and tetrasubstituted Zr(IV), Hf(IV) complexes ZrL4 4-6 [L = (C1)BTP-H (4), (TCl)BTP-H (5), (pent)BTP-H (6)] and HfL4 7-9 [L = (C1)BTP-H (7), (TCl)BTP-H (8), (pent)BTP-H (9)] were prepared by the reaction of Zr(O(i)Pr)4·((i)PrOH) and Hf(O(t)Bu)4 in toluene with the respective ligands in different stoichiometric proportions. The reaction between BTP and TiCl4 and ZrCl4 and HfCl4 in a 2 : 1 stoichiometric reaction resulted in the formation of disubstituted group IV chloride complexes L2MCl2 10-12 [L = (C1)BTP-H, M = Ti, Zr and Hf]. The molecular structures of complexes 1, 4, 7, 10, 11, and 12 were determined by single-crystal X-ray studies. The X-ray structure of 1 reveals a dimeric Zr(IV) complex containing a Zr2O2 core bridged through the oxygen atoms of the phenoxide groups. Each Zr atom is distorted from an octahedral symmetry. These complexes were found to be active towards the ring-opening polymerization (ROP) of L-lactide (L-LA) and rac-lactide (rac-LA). Complex 1 produced highly heterotactic poly(lactic acid) (PLA) from rac-LA under melt conditions with narrow molecular weight distributions (MWDs) and well controlled number average molecular weights (M(n)). Additionally, epoxide polymerizations using rac-cyclohexene oxide (CHO), rac-propylene oxide (PO), and rac-styrene oxide (SO) were also carried out with these complexes. The yield and molecular weight of the polymer was found to increase with the extension of reaction time. Compounds 1-12 were activated by methylaluminoxane (MAO) and show good activity for ethylene polymerization and produced high molecular weight polyethylene.