Nanostructured Vanadium Dioxide Materials for Optical Sensing Applications.

Vanadium dioxide (VO2) is one of the strongly correlated materials exhibiting a reversible insulator-metal phase transition accompanied by a structural transition from a low-temperature monoclinic phase to high-temperature rutile phase near room temperature. Due to the dramatic change in electrical resistance and optical transmittance of VO2, it has attracted considerable attention towards the electronic and optical device applications, such as switching devices, memory devices, memristors, smart windows, sensors, actuators, etc. The present review provides an overview of several methods for the synthesis of nanostructured VO2, such as solution-based chemical approaches (sol-gel process and hydrothermal synthesis) and gas or vapor phase synthesis techniques (pulsed laser deposition, sputtering method, and chemical vapor deposition). This review also presents stoichiometry, strain, and doping engineering as modulation strategies of physical properties for nanostructured VO2. In particular, this review describes ultraviolet-visible-near infrared photodetectors, optical switches, and color modulators as optical sensing applications associated with nanostructured VO2 materials. Finally, current research trends and perspectives are also discussed.

Antiferromagnetic coupling of van der Waals ferromagnetic Fe3GeTe2.

Among two-dimensional (2D) layered van der Waals materials, ferromagnetic 2D materials can be useful for compact low-power spintronic applications. One promising candidate material is Fe3GeTe2 (FGT), which has a strong perpendicular magnetic anisotropy and relatively high Curie temperature. In this study, we confirmed that an oxide layer (O-FGT) naturally forms on top of exfoliated FGT and that an antiferromagnetic coupling (AFC) exists between FGT and O-FGT layers. From a first-principles calculation, oxide formation at the interface of each layer induces an AFC between the layers. An AFC causes a tailed hysteresis loop, where two-magnetization reversal curves are included, and a negative remanence magnetization at a certain temperature range.

B. longum CKD1 enhances the efficacy of anti-diabetic medicines through upregulation of IL- 22 response in type 2 diabetic mice.

The gut microbiota plays a pivotal role in metabolic disorders, notably type 2 diabetes mellitus (T2DM). In this study, we investigated the synergistic potential of combining the effects of Bifidobacterium longum NBM7-1 (CKD1) with anti-diabetic medicines, LobeglitazoneⓇ (LO), SitagliptinⓇ (SI), and MetforminⓇ (Met), to alleviate hyperglycemia in a diabetic mouse model. CKD1 effectively mitigated insulin resistance, hepatic steatosis, and enhanced pancreatic ß-cell function, as well as fortifying gut-tight junction integrity. In the same way, SI-CKD1 and Met- CKD1 synergistically improved insulin sensitivity and prevented hepatic steatosis, as evidenced by the modulation of key genes associated with insulin signaling, ß-oxidation, gluconeogenesis, adipogenesis, and inflammation by qRT-PCR. The comprehensive impact on modulating gut microbiota composition was observed, particularly when combined with MetforminⓇ. This combination induced an increase in the abundance of Rikenellaceae and Alistipes related negatively to the T2DM incidence while reducing the causative species of Cryptosporangium, Staphylococcaceae, and Muribaculaceae. These alterations intervene in gut microbiota metabolites to modulate the level of butyrate, indole-3-acetic acid, propionate, and inflammatory cytokines and to activate the IL-22 pathway. However, it is meaningful that the combination of B. longum NBM7-1(CKD1) reduced the medicines' dose to the level of the maximal inhibitory concentrations (IC50). This study advances our understanding of the intricate relationship between gut microbiota and metabolic disorders. We expect this study to contribute to developing a prospective therapeutic strategy modulating the gut microbiota.

Direct Observation of Room-Temperature Magnetic Skyrmion Motion Driven by Ultra-Low Current Density in Van Der Waals Ferromagnets.

The recent discovery of room-temperature ferromagnetism in 2D van der Waals (vdW) materials, such as Fe3GaTe2 (FGaT), has garnered significant interest in offering a robust platform for 2D spintronic applications. Various fundamental operations essential for the realization of 2D spintronics devices are experimentally confirmed using these materials at room temperature, such as current-induced magnetization switching or tunneling magnetoresistance. Nevertheless, the potential applications of magnetic skyrmions in FGaT systems at room temperature remain unexplored. In this work, the current-induced generation of magnetic skyrmions in FGaT flakes employing high-resolution magnetic transmission soft X-ray microscopy is introduced, supported by a feasible mechanism based on thermal effects. Furthermore, direct observation of the current-induced magnetic skyrmion motion at room temperature in FGaT flakes is presented with ultra-low threshold current density. This work highlights the potential of FGaT as a foundation for room-temperature-operating 2D skyrmion device applications.

Intranasal Administration of Recombinant Newcastle Disease Virus Expressing SARS-CoV-2 Spike Protein Protects hACE2 TG Mice against Lethal SARS-CoV-2 Infection.

Coronavirus disease 2019 (COVID-19), caused by severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2), emerged as a global outbreak in 2019, profoundly affecting both human health and the global economy. Various vaccine modalities were developed and commercialized to overcome this challenge, including inactivated vaccines, mRNA vaccines, adenovirus vector-based vaccines, and subunit vaccines. While intramuscular vaccines induce high IgG levels, they often fail to stimulate significant mucosal immunity in the respiratory system. We employed the Newcastle disease virus (NDV) vector expressing the spike protein of the SARS-CoV-2 Beta variant (rK148/beta-S), and evaluated the efficacy of intranasal vaccination with rK148/beta-S in K18-hACE2 transgenic mice. Intranasal vaccination with a low dose (106.0 EID50) resulted in an 86% survival rate after challenge with the SARS-CoV-2 Beta variant. Administration at a high dose (107.0 EID50) led to a reduction in lung viral load and 100% survival against the SARS-CoV-2 Beta and Delta variants. A high level of the SARS-CoV-2 spike-specific IgA was also induced in vaccinated mice lungs following the SARS-CoV-2 challenge. Our findings suggest that rK148/beta-S holds promise as an intranasal vaccine candidate that effectively induces mucosal immunity against SARS-CoV-2.

Additive roles of antiferromagnetically coupled elements in the magnetic proximity effect in the GdFeCo/Pt system.

Interfacial magnetic interactions between different elements are the origin of various spin-transport phenomena in multi-elemental magnetic systems. We investigate the coupling between the magnetic moments of the rare-earth, transition-metal, and heavy-metal elements across the interface in a GdFeCo/Pt thin film, an archetype system to investigate ferrimagnetic spintronics. The Pt magnetic moments induced by the antiferromagnetically aligned FeCo and Gd moments are measured using element-resolved x-ray measurements. It is revealed that the proximity-induced Pt magnetic moments are always aligned parallel to the FeCo magnetic moments, even below the ferrimagnetic compensation temperature where FeCo has a smaller moment than Gd. This is understood by a theoretical model showing distinct effects of the rare-earth Gd 4f and transition-metal FeCo 3d magnetic moments on the Pt electronic states. In particular, the Gd and FeCo work in-phase to align the Pt moment in the same direction, despite their antiferromagnetic configuration. The unexpected additive roles of the two antiferromagnetically coupled elements exemplify the importance of detailed interactions among the constituent elements in understanding magnetic and spintronic properties of thin film systems.

Fabrication of nano-sized magnetic tunnel junctions using lift-off process assisted by atomic force probe tip.

We present a fabrication method for nano-scale magnetic tunnel junctions (MTJs), employing e-beam lithography and lift-off process assisted by the probe tip of atomic force microscope (AFM). It is challenging to fabricate nano-sized MTJs on small substrates because it is difficult to use chemical mechanical planarization (CMP) process. The AFM-assisted lift-off process enables us to fabricate nano-sized MTJs on small substrates (12.5 mm x 12.5 mm) without CMP process. The e-beam patterning has been done using bi-layer resist, the poly methyl methacrylate (PMMA)/ hydrogen silsesquioxane (HSQ). The PMMA/HSQ resist patterns are used for both the etch mask for ion milling and the self-aligned mask for top contact formation after passivation. The self-aligned mask buried inside a passivation oxide layer, is readily lifted-off by the force exerted by the probe tip. The nano-MTJs (160 nm x 90 nm) fabricated by this method show clear current-induced magnetization switching with a reasonable TMR and critical switching current density.

Investigation of the mechanism of the anomalous Hall effects in Cr2Te3/(BiSb)2(TeSe)3 heterostructure.

The interplay between ferromagnetism and the non-trivial topology has unveiled intriguing phases in the transport of charges and spins. For example, it is consistently observed the so-called topological Hall effect (THE) featuring a hump structure in the curve of the Hall resistance (Rxy) vs. a magnetic field (H) of a heterostructure consisting of a ferromagnet (FM) and a topological insulator (TI). The origin of the hump structure is still controversial between the topological Hall effect model and the multi-component anomalous Hall effect (AHE) model. In this work, we have investigated a heterostructure consisting of BixSb2-xTeySe3-y (BSTS) and Cr2Te3 (CT), which are well-known TI and two-dimensional FM, respectively. By using the so-called "minor-loop measurement", we have found that the hump structure observed in the CT/BSTS is more likely to originate from two AHE channels. Moreover, by analyzing the scaling behavior of each amplitude of two AHE with the longitudinal resistivities of CT and BSTS, we have found that one AHE is attributed to the extrinsic contribution of CT while the other is due to the intrinsic contribution of BSTS. It implies that the proximity-induced ferromagnetic layer inside BSTS serves as a source of the intrinsic AHE, resulting in the hump structure explained by the two AHE model.

Temperature dependence of intrinsic and extrinsic contributions to anisotropic magnetoresistance.

Electrical conduction in magnetic materials depends on their magnetization configuration, resulting in various magnetoresistances (MRs). The microscopic mechanisms of MR have so far been attributed to either an intrinsic or extrinsic origin, yet the contribution and temperature dependence of either origin has remained elusive due to experimental limitations. In this study, we independently probed the intrinsic and extrinsic contributions to the anisotropic MR (AMR) of a permalloy film at varying temperatures using temperature-variable terahertz time-domain spectroscopy. The AMR induced by the scattering-independent intrinsic origin was observed to be approximately 1.5% at T = 16 K and is virtually independent of temperature. In contrast, the AMR induced by the scattering-dependent extrinsic contribution was approximately 3% at T = 16 K but decreased to 1.5% at T = 155 K, which is the maximum temperature at which the AMR can be resolved using THz measurements. Our results experimentally quantify the temperature-dependent intrinsic and extrinsic contributions to AMR, which can stimulate further theoretical research to aid the fundamental understanding of AMR.

Effects of Interfacial Oxidization on Magnetic Damping and Spin-Orbit Torques.

We investigate the effects of interfacial oxidation on the perpendicular magnetic anisotropy, magnetic damping, and spin-orbit torques in heavy-metal (Pt)/ferromagnet (Co or NiFe)/capping (MgO/Ta, HfOx, or TaN) structures. At room temperature, the capping materials influence the effective surface magnetic anisotropy energy density, which is associated with the formation of interfacial magnetic oxides. The magnetic damping parameter of Co is considerably influenced by the capping material (especially MgO) while that of NiFe is not. This is possibly due to extra magnetic damping via spin-pumping process across the Co/CoO interface and incoherent magnon generation (spin fluctuation) developed in the antiferromagnetic CoO. It is also observed that both antidamping and field-like spin-orbit torque efficiencies vary with the capping material in the thickness ranges we examined. Our results reveal the crucial role of interfacial oxides on the perpendicular magnetic anisotropy, magnetic damping, and spin-orbit torques.

Universal field-tunable terahertz emission by ultrafast photoinduced demagnetization in Fe, Ni, and Co ferromagnetic films.

We report a universal terahertz (THz) emission behavior from simple Ni, Fe, and Co metallic ferromagnetic films, triggered by the femtosecond laser pulse and subsequent photoinduced demagnetization on an ultrafast time scale. THz emission behavior in ferromagnetic films is found to be consistent with initial magnetization states controlled by external fields, where the hysteresis of the maximal THz emission signal is observed to be well-matched with the magnetic hysteresis curve. It is experimentally demonstrated that the ultrafast THz emission by the photoinduced demagnetization is controllable in a simple way by external fields as well as pump fluences.

Role of non-thermal electrons in ultrafast spin dynamics of ferromagnetic multilayer.

Understanding of ultrafast spin dynamics is crucial for future spintronic applications. In particular, the role of non-thermal electrons needs further investigation in order to gain a fundamental understanding of photoinduced demagnetization and remagnetization on a femtosecond time scale. We experimentally demonstrate that non-thermal electrons existing in the very early phase of the photoinduced demagnetization process play a key role in governing the overall ultrafast spin dynamics behavior. We simultaneously measured the time-resolved reflectivity (TR-R) and the magneto-optical Kerr effect (TR-MOKE) for a Co/Pt multilayer film. By using an extended three-temperature model (E3TM), the quantitative analysis, including non-thermal electron energy transfer into the subsystem (thermal electron, lattice, and spin), reveals that energy flow from non-thermal electrons plays a decisive role in determining the type I and II photoinduced spin dynamics behavior. Our finding proposes a new mechanism for understanding ultrafast remagnetization dynamics.

Minor hysteresis patterns with a rounded/sharpened reversing behavior in ferromagnetic multilayer.

Hysteresis of ferromagnetic system exhibits a fundamental stimulus-response behavior, thereby casting all the important macromagnetic system parameters such as coercivity, nucleation field, saturation magnetization, and hysteresis loss. Recently, increasing attention has been paid to exploration of relatively less understood minor loop behavior, since faster operation of magnetic devices is inevitably accompanied by minor hysteresis behavior from cycling among unsaturated ferromagnetic states. Here, we report our microscopic investigation of unusual minor hysteresis loop behavior, represented by rounded or sharpened response of minor hysteresis loop of (CoFeB/Pd)4 multilayer film. It is observed that rounded and sharpened response in the minor hysteresis response could be manifested under proper conditions. The minor loop behavior has been systematically investigated by direct microscopic magnetic domain observation using magneto-optical Kerr microscopy. The rounded response of magnetization at the reversing external field along the minor hysteresis curve, so far neglected or considered as one of 'unusual' behaviors, has been found to be elaborately controllable by tuning the reversing field strength and the field sweep rate for multilayers with low repeat numbers. Variable roundedness of the minor hysteresis loop is understandable based on the analysis of magnetic domain dynamics such as domain nucleation and the domain wall velocity.

Current-driven dynamics and inhibition of the skyrmion Hall effect of ferrimagnetic skyrmions in GdFeCo films.

Magnetic skyrmions are swirling magnetic textures with novel characteristics suitable for future spintronic and topological applications. Recent studies confirmed the room-temperature stabilization of skyrmions in ultrathin ferromagnets. However, such ferromagnetic skyrmions show an undesirable topological effect, the skyrmion Hall effect, which leads to their current-driven motion towards device edges, where skyrmions could easily be annihilated by topographic defects. Recent theoretical studies have predicted enhanced current-driven behavior for antiferromagnetically exchange-coupled skyrmions. Here we present the stabilization of these skyrmions and their current-driven dynamics in ferrimagnetic GdFeCo films. By utilizing element-specific X-ray imaging, we find that the skyrmions in the Gd and FeCo sublayers are antiferromagnetically exchange-coupled. We further confirm that ferrimagnetic skyrmions can move at a velocity of ~50 m s-1 with reduced skyrmion Hall angle, |θSkHE| ~ 20°. Our findings open the door to ferrimagnetic and antiferromagnetic skyrmionics while providing key experimental evidences of recent theoretical studies.

Ultrafast giant magnetic cooling effect in ferromagnetic Co/Pt multilayers.

The magnetic cooling effect originates from a large change in entropy by the forced magnetization alignment, which has long been considered to be utilized as an alternative environment-friendly cooling technology compared to conventional refrigeration. However, an ultimate timescale of the magnetic cooling effect has never been studied yet. Here, we report that a giant magnetic cooling (up to 200 K) phenomenon exists in the Co/Pt nano-multilayers on a femtosecond timescale during the photoinduced demagnetization and remagnetization, where the disordered spins are more rapidly aligned, and thus magnetically cooled, by the external magnetic field via the lattice-spin interaction in the multilayer system. These findings were obtained by the extensive analysis of time-resolved magneto-optical responses with systematic variation of laser fluence as well as external field strength and direction. Ultrafast giant magnetic cooling observed in the present study can enable a new avenue to the realization of ultrafast magnetic devices.The forced alignment of magnetic moments leads to a large change in entropy, which can be used to reduce the temperature of a material. Here, the authors show that this magnetic cooling effect occurs on a femtosecond time scale in cobalt-platinum nano-multilayers.

Effects of selective oxidation of chitosan on physical and biological properties.

Chitosan was selectively oxidized at C-6 primary alcohol groups by TEMPO in the presence of sodium hypochlorite (NaOCl) and sodium bromide (NaBr), and also non-specifically oxidized only by NaOCl. Sequentially oxidized chitosan samples from 25 to 100% were produced by 25% increment, from both oxidation processes. By introducing carbonyl groups in chitosan structure with either oxidizing process, the water solubility was shown to be enhancing from all the oxidized sample groups. At the 25% of non-specific oxidation, 0.56% of solubility was detected but there was no proportional increase in solubility as the oxidation level increased. Moreover, the decreases in solubility were observed at 50%-oxidized (0.43%) and 100%-oxidized (0.45%) chitosan samples. During the specific oxidation process, 25%-oxidized 6-oxychitosan had the highest solubility, and the solubility decreased substantially from 0.72 to 0.15% as the degree of oxidation increased from 25 to 100%. Possibly, excessive incorporation of negative charges on chitosan resulted in the aggregation among 6-oxychitosan molecules by charge-charge interactions. The strongest cholic acid-retardation index (CRI, %) of highly soluble 25%-oxidized 6-oxychitosan was consistently observed until 24h of dialysis, which means the CRI is closely related to the water solubility of 6-oxychitosan. Therefore, the solubility improvement should be considered for enhancing the biological activity such as bile acid-binding capacity. Also, it was suggested that negative charge increase in chitosan structure above a certain level led to adverse effect on the binding capacity.

Induction of castration by immunization of male dogs with recombinant gonadotropin-releasing hormone (GnRH)-canine distemper virus (CDV) T helper cell epitope p35.

Immunocastration is a considerable alternative to a surgical castration method especially in male animal species for alleviating unwanted male behaviors and characteristics. Induction of high titer of antibody specific for gonadotropin-releasing hormone (GnRH) correlates with the regression of testes. Fusion proteins composed of canine GnRH and T helper (Th) cell epitope p35 originated from canine distemper virus (CDV) F protein and goat rotavirus VP6 protein were produced in E. coli. When these fusion proteins were injected to male dogs which were previously immunized with CDV vaccine, the fusion protein of GnRH-CDV Th cell epitope p35 induced much higher antibody than that of GnRH-rotavirus VP6 protein or GnRH alone. The degeneration of spermatogenesis was also verified in the male dogs immunized with the fusion protein of GnRH-CDV Th cell epitope p35. These results indicate that canine GnRH conjugated to CDV Th cell epitope p35 acted as a strong immunogen and the antibody to GnRH specifically neutralized GnRH in the testes. This study also implies a potential application of GnRH-based vaccines for immunocastration of male pets.

Spin nano-oscillator-based wireless communication.

Spin-torque nano-oscillators (STNOs) have outstanding advantages of a high degree of compactness, high-frequency tunability, and good compatibility with the standard complementary metal-oxide-semiconductor process, which offer prospects for future wireless communication. There have as yet been no reports on wireless communication using STNOs, since the STNOs also have notable disadvantages such as lower output power and poorer spectral purity in comparison with those of LC voltage-controlled oscillators. Here we show that wireless communication is achieved by a proper choice of modulation scheme despite these drawbacks of STNOs. By adopting direct binary amplitude shift keying modulation and non-coherent demodulation, we demonstrate STNO-based wireless communication with 200-kbps data rate at a distance of 1 m between transmitter and receiver. It is shown, from the analysis of STNO noise, that the maximum data rate can be extended up to 1.48 Gbps with 1-ns turn-on time. For the fabricated STNO, the maximum data rate is 5 Mbps which is limited by the rise time measured in the total system. The result will provide a viable route to real microwave application of STNOs.

Transformation of ZnO nanobelts into single-crystalline Mn3O4 nanowires.

Single-crystalline Mn(3)O(4) nanowires were prepared using the vapor-phase transformation of ZnO nanobelts. Mn(3)O(4)-decorated ZnO nanobelts and ZnO-ZnMn(2)O(4) core-shell nanocables (NCs) were also obtained as reaction intermediates. Heteroepitaxial growth of tetragonal spinel Mn(3)O(4) (or ZnMn(2)O(4)) on wurtzite ZnO is a possible reason for the growth of single-crystalline Mn(3)O(4) nanowires. Growth interfaces are possibly formed between the wurtzite (101[overline]0)/(21[overline]1[overline]0) and spinel (1[overline]01)/(4[overline]11) planes. Various one-dimensional homonanostructures and heteronanostructures consisting of n-ZnO, p-Mn(3)O(4), and p-ZnMn(2)O(4) can be used to design high-performance gas sensors.