Dissipative coupling in a Bragg-grating-coupled single resonator with Fano resonance for anti-PT-symmetric gyroscopes.

Anti-parity-time-symmetric Hamiltonians show an enhanced sensitivity to external perturbations that can be used for high-performance angular velocity sensing. Dissipative coupling is a valuable way for realizing anti-PT-symmetric Hamiltonians with optical resonators and is usually obtained by means of auxiliary waveguides. Here, we model and experimentally show the dissipative coupling between two counterpropagating modes of a single resonator, by means of a Bragg-grating placed in the feeding bus. The proposed solution enables the possibility of accurately designing the dissipative coupling strength in integrated non-Hermitian gyroscopes, thus providing high flexibility in the design of the proposed sensor. Moreover, we theoretically and experimentally demonstrate that the dissipative coupling between two counterpropagating modes of the same resonant cavity can give rise to an asymmetric Fano resonance.

Feature Papers in Optical Sensors 2022.

Today, optical sensors are the subject of a very significant number of studies and applications [...].

Potentiometric Chloride Ion Biosensor for Cystic Fibrosis Diagnosis and Management: Modeling and Design.

The ion-sensitive field-effect transistor is a well-established electronic device typically used for pH sensing. The usability of the device for detecting other biomarkers in easily accessible biologic fluids, with dynamic range and resolution compliant with high-impact medical applications, is still an open research topic. Here, we report on an ion-sensitive field-effect transistor that is able to detect the presence of chloride ions in sweat with a limit-of-detection of 0.004 mol/m3. The device is intended for supporting the diagnosis of cystic fibrosis, and it has been designed considering two adjacent domains, namely the semiconductor and the electrolyte containing the ions of interest, by using the finite element method, which models the experimental reality with great accuracy. According to the literature explaining the chemical reactions that take place between the gate oxide and the electrolytic solution, we have concluded that anions directly interact with the hydroxyl surface groups and replace protons previously adsorbed from the surface. The achieved results confirm that such a device can be used to replace the traditional sweat test in the diagnosis and management of cystic fibrosis. In fact, the reported technology is easy-to-use, cost-effective, and non-invasive, leading to earlier and more accurate diagnoses.

Non-Hermitian Sensing in Photonics and Electronics: A Review.

Recently, non-Hermitian Hamiltonians have gained a lot of interest, especially in optics and electronics. In particular, the existence of real eigenvalues of non-Hermitian systems has opened a wide set of possibilities, especially, but not only, for sensing applications, exploiting the physics of exceptional points. In particular, the square root dependence of the eigenvalue splitting on different design parameters, exhibited by 2 × 2 non-Hermitian Hamiltonian matrices at the exceptional point, paved the way to the integration of high-performance sensors. The square root dependence of the eigenfrequencies on the design parameters is the reason for a theoretically infinite sensitivity in the proximity of the exceptional point. Recently, higher-order exceptional points have demonstrated the possibility of achieving the nth root dependence of the eigenfrequency splitting on perturbations. However, the exceptional sensitivity to external parameters is, at the same time, the major drawback of non-Hermitian configurations, leading to the high influence of noise. In this review, the basic principles of PT-symmetric and anti-PT-symmetric Hamiltonians will be shown, both in photonics and in electronics. The influence of noise on non-Hermitian configurations will be investigated and the newest solutions to overcome these problems will be illustrated. Finally, an overview of the newest outstanding results in sensing applications of non-Hermitian photonics and electronics will be provided.

Compact resonant 2 × 2 crossbar switch using three coupled waveguides with a central nanobeam.

This theoretical simulation paper presents designs and projected performance of ∼1550-nm silicon-on-insulator (SOI) and ∼2000-nm Ge-on-Si-on-nitride and Ge-on-nitride 2×2 optical crossbar switches based upon a three-waveguide coupler in which the central waveguide is a nanobeam actuated by the thermo-optical (TO) effect. A TO heater stripe is located atop the central nanobeam. To implement accurate and realistic designs, the 3D finite difference time domain approach was employed. The metrics of crossbar switching, insertion loss (IL) and crosstalk (CT) were evaluated for choices of 3-waveguide structure parameters and TO-induced index changes. The predicted ILs and CTs were excellent, enabling the designed devices to be considered as fundamental building blocks in wavelength-division-multiplexed cross-connect (WXC) applications. Proposed here are compact, nonblocking space-and-wavelength routing switches to be constructed in a monolithic, industry-standard SOI chip (and in Ge-on-SON and GON chips). Specifics are given for realizing 16 × 16 × Mλ WXCs as well as reconfigurable, multi-resonant, programmable hexagonal and diamond meshes.

Partial Least-Squares Regression as a Tool to Retrieve Gas Concentrations in Mixtures Detected Using Quartz-Enhanced Photoacoustic Spectroscopy.

We report on a statistical tool based on partial least-squares regression (PLSR) able to retrieve single-component concentrations in a multiple-gas mixture characterized by spectrally overlapping absorption features. Absorption spectra of mixtures of CO-N2O and mixtures of C2H2-CH4-N2O, both diluted in N2, were detected in the mid-IR range by exploiting quartz-enhanced photoacoustic spectroscopy (QEPAS) and using two quantum cascade lasers as light sources. Single-gas reference spectra of each target molecule were acquired and used as PLSR-based algorithm training data set. The concentration range explored in the analysis varies from a few parts-per-million (ppm) to thousands of ppm. Within this concentration range, the influence of the gas matrix on nonradiative relaxation processes can be neglected. Exploiting the ability of PLSR to deal with correlated data, these spectra were used to generate new simulated spectra, i.e., linear combinations of the reference ones. A Gaussian noise distribution was added to the created data set, simulating the real QEPAS signal fluctuations around the peak value. Compared with standard multilinear regression, PLSR predicted gas concentrations with a calibration error up to 5 times better, even with absorption features with spectral overlap greater than 97%.

Ultrafast electro-optical disk modulators for logic, communications, optical repeaters, and wavelength converters.

We propose a U-shaped pn junction in a silicon-on-insulator microdisk resonator to effectively double the junction-mode overlap in the state-of-the-art, vertical pn junction microdisk electro-optical (EO) modulators. The U-shaped pn junction promotes the maximum overlap between the junction depletion zone and the whispering gallery optical mode in the microdisk. By fully depleting the p region of the npn-sequenced U-junction, the capacitance is reduced below 3 fF, which significantly improves the speed and power performance. In this work, we implement the high-efficiency, depleted U-junction design to maximize the operating bandwidth of EO modulators, EO logic elements, EO 2 × 2 switches for wavelength-division cross-connects, 2 × 2 reconfigurable optical add-drop multiplexers, optical-to-electrical-to-optical (OEO) repeaters-with-gain, OEO wavelength converters, and 2 × 2 optical-optical logic gates. These devices all operate in the 7.6-to-50 GHz bandwidth range with ultralow energy consumption between 0.4 and 9.8 fJ/bit. By using CMOS-compatible materials and fabrication-feasible design dimensions, our proposed high-performance devices offer a promising potential in next-generation, high-volume electro-optical communications and computing circuits.

Numerical Simulation of Optical Sensing by the Far Field Pattern Radiated by Periodic Grating Strips Over Silica Buffer on the Silicon Wire Waveguide.

This paper presents results of numerical modeling of a modified design of an optical sensor based on segmented periodic silicon oxynitride (SiON) grating evanescently coupled with silicon wire. This segmented grating works as a leaky waveguide, which filters input power from a broadband optical source and radiates it as an outcoming optical beam with both a small wavelength band and a small beam divergence. The radiation angle strongly depends on the refractive index of the grating environment and provides sensor interrogation by measuring the far field pattern in the focal plane of the lens, which is placed near the sensor element. The device concept was verified by direct numerical modeling through the finite difference time domain (FDTD) method and provided moderate intrinsic limit of detection (iLOD) ~ 0.004 RIU with a possible iLOD ~ 0.001 RIU for 10 mm-long structures.

On-Chip Group-IV Heisenberg-Limited Sagnac Interferometric Gyroscope at Room Temperature.

A room-temperature strip-guided "manufacturable" Silicon-on-Insulator (SOI)/GeSn integrated-photonics quantum-gyroscope chip operating at 1550 nm is proposed and analysed. We demonstrate how the entangled photons generated in Si Spontaneous Four Wave Mixing (SFWM) can be used to improve the resolution of a Sagnac interferometric gyroscope. We propose different integrated architectures based on degenerate and non-degenerate SFWM. The chip comprises several beam splitters, two SFWM entangled photon sources, a pump filter, integrated Mach-Zehnder interferometric gyro, and an array of waveguide coupled GeSn/Ge/Si single-photon avalanche detectors. The laser pumped SWFM sources generate the signal-idler pairs, which, in turn, are used to measure the two-photon, four-photon, and higher order coincidences, resulting in an increasing of the gyro resolution by a factor of two and four, with respect to the classical approach.

Environmental Monitoring of Methane with Quartz-Enhanced Photoacoustic Spectroscopy Exploiting an Electronic Hygrometer to Compensate the H2O Influence on the Sensor Signal.

A dual-gas sensor based on the combination of a quartz-enhanced photoacoustic spectroscopy (QEPAS) sensor and an electronic hygrometer was realized for the simultaneous detection of methane (CH4) and water vapor (H2O) in air. The QEPAS sensor employed an interband cascade laser operating at 3.34 µm capable of targeting a CH4 absorption line at 2988.8 cm-1 and a water line at 2988.6 cm-1. Water vapor was measured with both the electronic hygrometer and the QEPAS sensor for comparison. The measurement accuracy provided by the hygrometer enabled the adjustment of methane QEPAS signal with respect to the water vapor concentration to retrieve the actual CH4 concentration. The sensor was tested by performing prolonged measurements of CH4 and H2O over 60 h to demonstrate the effectiveness of this approach for environmental monitoring applications.

Fiber-Coupled Quartz-Enhanced Photoacoustic Spectroscopy System for Methane and Ethane Monitoring in the Near-Infrared Spectral Range.

We report on a fiber-coupled, quartz-enhanced photoacoustic spectroscopy (QEPAS) near-IR sensor for sequential detection of methane (CH4 or C1) and ethane (C2H6 or C2) in air. With the aim of developing a lightweight, compact, low-power-consumption sensor suitable for unmanned aerial vehicles (UAVs)-empowered environmental monitoring, an all-fiber configuration was designed and realized. Two laser diodes emitting at 1653.7 nm and 1684 nm for CH4 and C2H6 detection, respectively, were fiber-combined and fiber-coupled to the collimator port of the acoustic detection module. No cross talk between methane and ethane QEPAS signal was observed, and the related peak signals were well resolved. The QEPAS sensor was calibrated using gas samples generated from certified concentrations of 1% CH4 in N2 and 1% C2H6 in N2. At a lock-in integration time of 100 ms, minimum detection limits of 0.76 ppm and 34 ppm for methane and ethane were achieved, respectively. The relaxation rate of CH4 in standard air has been investigated considering the effects of H2O, N2 and O2 molecules. No influence on the CH4 QEPAS signal is expected when the water vapor concentration level present in air varies in the range 0.6-3%.

Dual-Gas Quartz-Enhanced Photoacoustic Sensor for Simultaneous Detection of Methane/Nitrous Oxide and Water Vapor.

The development of a dual-gas quartz-enhanced photoacoustic (QEPAS) sensor capable of simultaneous detection of water vapor and alternatively methane or nitrous oxide is reported. A diode laser and a quantum cascade laser (QCL) excited independently and simultaneously both the fundamental and the first overtone flexural mode of the quartz tuning fork (QTF), respectively. The diode laser targeted a water absorption line located at 7181.16 cm-1 (1.392 µm), while the QCL emission wavelength is centered at 7.71 µm and was tuned to target two strong absorption lines of methane and nitrous oxide, located at 1297.47 and 1297.05 cm-1, respectively. Two sets of microresonator tubes were positioned, respectively, at the antinode points of the fundamental and the first overtone flexural modes of the QTF to enhance the QEPAS signal-to-noise ratio. Detection limits of 18 ppb for methane, 5 ppb for nitrous oxide and 20 ppm for water vapor have been achieved at a lock-in integration time of 100 ms.

High-sensitivity real-splitting anti-PT-symmetric microscale optical gyroscope.

Optical gyroscopes measure the angular velocity using the Sagnac effect. However, the resonance splitting due to the Sagnac effect is directly proportional to the linear dimensions of the device. Consequently, integrated optical gyroscopes are still the subject of research. We propose the idea and the design of an anti-parity-time (APT)-symmetric optical gyroscope exhibiting a resonance splitting independent from the dimensions of the device. With a 80 µm×40 µm footprint integrated device, we demonstrated that it is possible to achieve a resonance splitting 106 times higher than the one obtained through the classical Sagnac effect. With respect to the previously proposed parity-time (PT)-symmetric gyroscope, our solution exhibits a real frequency splitting, directly measurable at the output power spectrum. Moreover, it can be kept at its exceptional point more accurately than the PT-symmetric counterpart. Finally, the anti-PT-symmetric gyroscope presented here can detect the sign of the angular velocity differently from the PT-symmetric one.

Methane Gas Photonic Sensor Based on Resonant Coupled Cavities.

In this paper we report methane gas photonic sensors exploiting the principle of absorption-induced redirection of light propagation in coupled resonant cavities. In particular, an example of implemented architecture consists of a Fabry-Pérot (FP) resonator coupled to a fibre ring resonator, operating in the near IR. By changing the concentration of the methane gas in the FP region, the absorption coefficient of the FP changes. In turn, the variation of the methane gas concentration allows the redirection of the light propagation in the fibre ring resonator. Then, the methane gas concentration can be evaluated by analysing the ratio between the powers of two resonant modes, counter-propagating in the fibre ring resonator. In this way, a self-referenced read-out scheme, immune to the power fluctuations of the source, has been conceived. Moreover, a sensitivity of 0.37 ± 0.04 [dB/%], defined as the ratio between resonant modes at different outputs, in a range of methane concentration included between the 0% and 5%, has been achieved. These results allow a detection limit below the lower explosive limit (LEL) to be reached with a cost-effective sensor system.

Acoustic Coupling between Resonator Tubes in Quartz-Enhanced Photoacoustic Spectrophones Employing a Large Prong Spacing Tuning Fork.

A theoretical model describing the acoustic coupling between two resonator tubes in spectrophones exploiting custom-made quartz tuning forks (QTFs) is proposed. The model is based on an open-end correction to predict the optimal tube length. A calculation of the sound field distribution from one tube exit allowed for the estimation of the optimal radius as a function of the QTF prong spacing and the sound wavelength. The theoretical predictions have been confirmed using experimental studies employing a custom QTF with a fundamental flexural mode resonance frequency of 15.8 kHz and a quality factor of 15,000 at atmospheric pressure. The spacing between the two prongs was 1.5 mm. Spectrophones mounting this QTF were implemented for the quartz-enhanced photoacoustic detection of water vapor in air in the mid-infrared spectral range.

Tunable optical-microwave filters optimized for 100 MHz resolution.

New continuously tunable RF-spectrum analyzers, RF receivers, and RF signal generators are proposed and analyzed for the silicon-on-insulator integrated-photonic platform at the ~1550 nm wavelength. These RF system-on-a-chip applications are enabled by a new narrowband 2x2 Mach-Zehnder interferometer (MZI) tuned filters for reconfigurable multiplexing, demultiplexing and RF channel selection. The filter can be optimized for ~100 MHz 3-dB bandwidth (BW) by utilizing N closely coupled Bragg-grating resonators to form one effective waveguide resonator in the single-mode silicon nanowire used for each MZI arm. The number of periods M within each individual resonator is selected to engineer BW in the 0.1 to 1 GHz range. Butterworth design is employed. Continuous tuning of the 100 MHz-BW devices over 18.6 GHz has been simulated by using local micron-scale thermo-optical heater stripes on the MZI arms with a temperature rise from 0 to 48K. For the case of N = 3 and 100-nm silicon side teeth, some representative performance predictions are: insertion loss (IL) = -10.7 dB, BW = 80.5 MHz and L = 113 µm for M = 58; while IL = -0.74 dB, BW = 1210 MHz and L = 86 µm for M = 44.

Reconfigurable optical-microwave filter banks using thermo-optically tuned Bragg Mach-Zehnder devices.

A new reconfigurable, tunable on-chip optical filter bank is proposed and analyzed for the silicon-on-insulator platform at the ~1550 nm wavelength. The waveguided bank is a cascade connection of 2 x 2 Mach-Zehnder interferometer (MZI) filters. An identical standing-wave resonator is situated in each MZI "arm." Using the thermo-optic (TO) effect to perturb this waveguide's index, the TO heater stripes provide continuous tuning of the filter by shifting the resonance smoothly along the wavelength axis. To reconfigure and program the cascade array, a broadband 2 x 2 MZI-related switch is inserted between adjacent filters. The novel TO switch, described here, can provide either single or double interconnection of 2 x 2 filters. The filter resonator is a new in-guide array of N closely coupled phase-shifted Bragg-grating resonators that provide one resonant spectral profile with 5 to 100 GHz bandwidth. The length of each grating cavity in the N group is chosen according to the Butterworth filter technique, and this gives high peak transmission for the composite. The predicted spectral profiles of a three-stage cascade show two-or-three peaks, or two-or-three notches with movable wavelength-locations as well as tunable wavelength-separations between those features. A tunable notch within a wider movable passband is also feasible. Potential applications include microwave photonics, wavelength-selective systems, optical spectroscopy and optical sensing.

Mach-Zehnder crossbar switching and tunable filtering using N-coupled waveguide Bragg resonators.

This theoretical modeling-and-simulation paper presents designs and projected performance of ~1500-nm silicon-on-insulator 2 x 2 Mach-Zehnder interferometer (MZI) optical crossbar switches and tunable filters that are actuated by thermo-optical (TO) means. A TO heater stripe is assumed to be on the top of each waveguided arm in the interferometer. Each strip-waveguide arm contains an inline set of N-fold coupled, phase-shifted Bragg-grating resonators. To implement accurate and realistic designs, a mixed full-vectorial mathematical model based upon the finite-element, coupled-mode, and transfer-matrix approaches was employed. The Butterworth-filter technique for grating length and weighting was used. The resulting narrowband waveguide-transmission spectral shape was better-than-Lorentzian because of its steeper sidewalls (faster rolloff). The metrics of crossbar switching, insertion loss (IL) and crosstalk (CT), were evaluated for choices of grating strength and TO-induced change in the grating-waveguide refractive index. The predicted ILs and CTs were quite superior to those cited in the literature for experimental and theoretical MZI devices based upon silicon nanobeam resonators. This was true for the Type-I and Type-II resonator addressing discussed here. Finally, we examined the TO-tunable composite filter profiles that are feasible by connecting two or more Type-I MZIs in an optical series arrangement. A variety of narrow filter shapes, tunable over ~2 nm, was found.

Numerical Simulation of a Novel Sensing Approach Based on Abnormal Blocking by Periodic Grating Strips near the Silicon Wire Waveguide.

This paper discusses the physical nature and the numerical modeling of a novel approach of periodic structures for applications as photonic sensors. The sensing is based on the high sensitivity to the cover index change of the notch wavelength. This sensitivity is due to the effect of abnormal blocking of the guided wave propagating along the silicon wire with periodic strips overhead it through the silica buffer. The structure sensing is numerically modeled by 2D and 3D finite difference time domain (FDTD) method, taking into account the waveguide dispersion. The modeling of the long structures (more than 1000 strips) is accomplished by the 2D method of lines (MoL) with a maximal implementation of the analytical feature of the method. It is proved that the effect of abnormal blocking could be used for the construction of novel types of optical sensors.

Fibre Bragg Grating Based Strain Sensors: Review of Technology and Applications.

Fibre Bragg grating (FBG) strain sensors are not only a very well-established research field, but they are also acquiring a bigger market share due to their sensitivity and low costs. In this paper we review FBG strain sensors with high focus on the underlying physical principles, the interrogation, and the read-out techniques. Particular emphasis is given to recent advances in highly-performing, single head FBG, a category FBG strain sensors belong to. Different sensing schemes are described, including FBG strain sensors based on mode splitting. Their operation principle and performance are reported and compared with the conventional architectures. In conclusion, some advanced applications and key sectors the global fibre-optic strain sensors market are envisaged, as well as the main market players acting in this field.