RESUMEN
As part of a long-term research project aiming at generating a biomechanical model of a fossil human tongue from a carefully designed 3D Finite Element mesh of a living human tongue, we present a computer-based method that optimally registers 3D CT images of the head and neck of the living human into similar images of another primate. We quantitatively evaluate the method on a baboon. The method generates a geometric deformation field which is used to build up a 3D Finite Element mesh of the baboon tongue. In order to assess the method's ability to generate a realistic tongue from bony structure information alone, as would be the case for fossil humans, its performance is evaluated and compared under two conditions in which different anatomical information is available: (1) combined information from soft-tissue and bony structures; (2) information from bony structures alone. An Uncertainty Quantification method is used to evaluate the sensitivity of the transformation to two crucial parameters, namely the resolution of the transformation grid and the weight of a smoothness constraint applied to the transformation, and to determine the best possible meshes. In both conditions the baboon tongue morphology is realistically predicted, evidencing that bony structures alone provide enough relevant information to generate soft tissue.
Asunto(s)
Hominidae , Animales , Humanos , Fósiles , Cráneo/diagnóstico por imagen , Lengua/diagnóstico por imagen , Papio , Análisis de Elementos Finitos , Simulación por ComputadorRESUMEN
A personalized 3D breast model could present a real benefit for preoperative discussion with patients, surgical planning, and guidance. Breast tissue biomechanical properties have been poorly studied in vivo, although they are important for breast deformation simulation. The main objective of our study was to determine breast skin thickness and breast skin and adipose/fibroglandular tissue stiffness. The secondary objective was to assess clinical predictors of elasticity and thickness: age, smoking status, body mass index, contraception, pregnancies, breastfeeding, menopausal status, history of radiotherapy or breast surgery. Participants were included at the Montpellier University Breast Surgery Department from March to May 2022. Breast skin thickness was measured by ultrasonography, breast skin and adipose/fibroglandular tissue stiffnesses were determined with a VLASTIC non-invasive aspiration device at three different sites (breast segments I-III). Multivariable linear models were used to assess clinical predictors of elasticity and thickness. In this cohort of 196 women, the mean breast skin and adipose/fibroglandular tissue stiffness values were 39 and 3 kPa, respectively. The mean breast skin thickness was 1.83 mm. Only menopausal status was significantly correlated with breast skin thickness and adipose/fibroglandular tissue stiffness. The next step will be to implement these stiffness and thickness values in a biomechanical breast model and to evaluate its capacity to predict breast tissue deformations.
Asunto(s)
Neoplasias de la Mama , Mama , Humanos , Femenino , Mama/diagnóstico por imagen , Elasticidad , Simulación por Computador , Ultrasonografía , Neoplasias de la Mama/diagnóstico por imagenRESUMEN
In order to study the local interactions between facial soft-tissues and a Silhouette Soft® suspension suture, a CE marked medical device designed for the repositioning of soft tissues in the face and the neck, Finite element simulations were run, in which a model of the suture was embedded in a three-layer Finite Element structure that accounts for the local mechanical organization of human facial soft tissues. A 2D axisymmetric model of the local interactions was designed in ANSYS, in which the geometry of the tissue, the boundary conditions and the applied loadings were considered to locally mimic those of human face soft tissue constrained by the suture in facial tissue repositioning. The Silhouette Soft suture is composed of a knotted thread and sliding cones that are anchored in the tissue. Hence, simulating these interactions requires special attention for an accurate modelling of contact mechanics. As tissue is modelled as a hyper-elastic material, the displacement of the facial soft tissue changes in a nonlinear way with the intensity of stress induced by the suture and the number of the cones. Our simulations show that for a 4-cone suture a displacement of 4.35 mm for a 2.0 N external loading and of 7.6 mm for 4.0 N. Increasing the number of cones led to the decrease in the equivalent local strain (around 20%) and stress (around 60%) applied to the tissue. The simulated displacements are in general agreement with experimental observations.
Asunto(s)
Suturas , Humanos , Análisis de Elementos Finitos , Cadáver , Fenómenos Biomecánicos , Estrés MecánicoRESUMEN
OBJECTIVE: Pressure injuries (PIs) result in an extended duration of care and increased risks of complications for patients. When treating a PI, the aim is to hinder further PI development and speed up the healing time. Urgo RID recently developed a new bilayer dressing to improve the healing of stages 2 and 3 heel PIs. This study aims to numerically investigate the efficiency of this new bilayer dressing to reduce strains around the PI site. METHODS: The researchers designed three finite element models based on the same heel data set to compare the Green-Lagrange compressive and maximal shear strains in models without a PI, with a stage 2 PI, and with a stage 3 PI. Simulations with and without the dressing were computed. Analysis of the results was performed in terms of strain clusters, defined as volumes of tissues with high shear and compressive strains. RESULTS: Decreases in the peak and mean values of strains were low in all three models, between 0% and 20%. However, reduction of the strain cluster volumes was high and ranged from 55% to 68%. CONCLUSIONS: The cluster analysis enables the robust quantitative comparison of finite element analysis. Results suggest that use of the new bilayer dressing may reduce strain around the PI site and that this dressing could also be used in a prophylactic manner. Results should be extended to a larger cohort of participants.
Asunto(s)
Sordera , Úlcera por Presión , Humanos , Análisis de Elementos Finitos , Talón , Úlcera por Presión/prevención & control , Vendajes , Análisis por ConglomeradosRESUMEN
OBJECTIVE: 2D Ultrasound (US) imaging has been recently investigated as a more accessible alternative to 3D Magnetic Resonance Imaging (MRI) for the estimation of soft issue motion under external mechanical loading. In the context of pressure ulcer prevention, the aim of this pilot MRI study was to design an experiment to characterize the sacral soft tissue motion under a controlled mechanical loading. Such an experiment targeted the estimation of the discrepancy between tissue motion assessed using a 2D imaging modality (echography) versus tissue motion assessed using a (reference) 3D imaging modality (MRI). METHODS: One healthy male volunteer participated in the study. An MRI-compatible custom-made setup was designed and used to load the top region of the sacrum with a 3D-printed copy of the US transducer. Five MR images were collected, one in the unloaded and four in the different loaded configurations (400-1200 [g]). Then, a 3D displacement field for each loading configuration was extracted based on the results of digital volume correlation. Tissue motion was separated into the X, Y, Z directions of the MRI coordinate system and the ratios between the out-of-plane and in-plane components were assessed for each voxel of the selected region of interest. RESULTS: Ratios between the out-of-plane and in-plane displacement components were higher than 0.6 for more than half of the voxels in the region of interest for all load cases and higher than 1 for at least quarter of the voxels when loads of 400-800 [g] were used. CONCLUSION: The out-of-ultrasound-plane tissue displacement was not negligible, therefore 2D US imaging should be used with caution for the evaluation of the tissue motion in the sacrum region. The 3D US modality should be further investigated for this application.
Asunto(s)
Úlcera por Presión , Sacro , Humanos , Masculino , Sacro/diagnóstico por imagen , Úlcera por Presión/diagnóstico por imagen , Ultrasonografía/métodos , Imagenología Tridimensional/métodos , Imagen por Resonancia Magnética/métodos , Medición de RiesgoRESUMEN
Pressure Ulcers (PU) are real burdens for patients in healthcare systems, affecting their quality of life. External devices such as prophylactic dressings may be used to prevent the onset of PU. A new type of dressing was designed to alleviate soft tissue under pressure, with the objective to prevent PU and to improve the healing conditions of category-1 and category-2 wounds. The mechanical interactions of this dressing with a generic model of human skin/hypodermal soft tissue was simulated using the Finite Element (FE) method. Different cases with intact skin tissues and injured tissues with a category-2 PU, with and without dressings in place, were modeled. The tissues were deformed under compressive load; internal strains were computed. The results showed a clear benefit from the use of the dressing to reduce the peak internal strains both in the intact and injured tissues models by 17-25%, respectively. The intact soft tissues model was evaluated via sacral pressure measurements performed on one healthy volunteer. Results showed a good agreement between pressure measurements and estimations both with and without the dressing in place; particularly under the bony prominence and in surrounding tissues. As a conclusion, the importance of dressings to maintain a proper biochemical environment for the healing of PU is incontestable. Yet, new concepts of dressings may be developed to prevent the onset of PU, but also to provide local stress and strain reliefs and create mechanical conditions as less damaging as possible for the tissues.
Asunto(s)
Úlcera por Presión , Vendajes , Análisis de Elementos Finitos , Humanos , Úlcera por Presión/prevención & control , Calidad de Vida , Región SacrococcígeaRESUMEN
BACKGROUND: Physiologic aging is associated with loss of mobility, sarcopenia, skin atrophy and loss of elasticity. These factors contribute, in the elderly, to the occurrence of a pressure ulcer (PU). Brightness mode ultrasound (US) and shear wave elastography (SWE) have been proposed as a patient-specific, bedside, and predictive tool for PU. However, reliability and clinical feasibility in application to the sacral region have not been clearly established. METHOD: The current study aimed to propose a simple bedside protocol combining US and SWE. The protocol was first tested on a group of 19 healthy young subjects by two operators. The measurements were repeated three times. Eight parameters were evaluated at the medial sacral crest. Intraclass Correlation Coefficient (ICC) was used for reliability assessment and the modified Bland Altman plot analysis for agreement assessment. The protocol was then evaluated for clinical feasibility on a healthy older group of 11 subjects with a mean age of 65 ± 2.4 yrs. FINDINGS: ICC showed poor to good reliability except for skin SWE and hypodermis thickness with an ICC (reported as: mean (95%CI)) of 0.78 (0.50-0.91) and 0.98 (0.95-0.99) respectively. No significant differences were observed between the young and older group except for the muscle Shear Wave Speed (SWS) (respectively 2.11 ± 0.27 m/s vs 1.70 ± 0.17 m/s). INTERPRETATION: This is the first protocol combining US and SWE that can be proposed on a large scale in nursing homes. Reliability, however, was unsatisfactory for most parameters despite efforts to standardize the protocol and measurement definitions. Further studies are needed to improve reliability.
Asunto(s)
Diagnóstico por Imagen de Elasticidad , Anciano , Elasticidad , Diagnóstico por Imagen de Elasticidad/métodos , Estudios de Factibilidad , Humanos , Persona de Mediana Edad , Reproducibilidad de los Resultados , Ultrasonografía/métodos , Adulto JovenRESUMEN
Catherine Milne and colleagues present the findings of their review, ccna2@juno.com.
Asunto(s)
Equipos y Suministros/efectos adversos , Úlcera por Presión/prevención & control , Consenso , Humanos , Factores de RiesgoRESUMEN
3T3-L1 cells serve as model systems for studying adipogenesis and research of adipose tissue-related diseases, e.g. obesity and diabetes. Here, we present two novel and complementary nondestructive methods for adipogenesis analysis of living cells which facilitate continuous monitoring of the same culture over extended periods of time, and are applied in parallel at the macro- and micro-scales. At the macro-scale, we developed visual differences mapping (VDM), a novel method which allows to determine level of adipogenesis (LOA)-a numerical index which quantitatively describes the extent of differentiation in the whole culture, and percentage area populated by adipocytes (PAPBA) across a whole culture, based on the apparent morphological differences between preadipocytes and adipocytes. At the micro-scale, we developed an improved version of our previously published image-processing algorithm, which now provides data regarding single-cell morphology and lipid contents. Both methods were applied here synergistically for measuring differentiation levels in cultures over multiple weeks. VDM revealed that the mean LOA value reached 1.11 ± 0.06 and the mean PAPBA value reached >60%. Micro-scale analysis revealed that during differentiation, the cells transformed from a fibroblast-like shape to a circular shape with a build-up of lipid droplets. We predict a vast potential for implementation of these methods in adipose-related pharmacological research, such as in metabolic-syndrome studies.
Asunto(s)
Adipocitos/citología , Adipogénesis , Técnicas de Cultivo de Célula/métodos , Diferenciación Celular , Células 3T3-L1 , Algoritmos , Animales , Forma de la Célula , Fibroblastos , Gotas Lipídicas , Lípidos/análisis , Ratones , Modelos Biológicos , ObesidadRESUMEN
Ischial pressure ulcer is an important risk for every paraplegic person and a major public health issue. Pressure ulcers appear following excessive compression of buttock's soft tissues by bony structures, and particularly in ischial and sacral bones. Current prevention techniques are mainly based on daily skin inspection to spot red patches or injuries. Nevertheless, most pressure ulcers occur internally and are difficult to detect early. Estimating internal strains within soft tissues could help to evaluate the risk of pressure ulcer. A subject-specific biomechanical model could be used to assess internal strains from measured skin surface pressures. However, a realistic 3D non-linear Finite Element buttock model, with different layers of tissue materials for skin, fat and muscles, requires somewhere between minutes and hours to compute, therefore forbidding its use in a real-time daily prevention context. In this article, we propose to optimize these computations by using a reduced order modeling technique (ROM) based on proper orthogonal decompositions of the pressure and strain fields coupled with a machine learning method. ROM allows strains to be evaluated inside the model interactively (i.e. in less than a second) for any pressure field measured below the buttocks. In our case, with only 19 modes of variation of pressure patterns, an error divergence of one percent is observed compared to the full scale simulation for evaluating the strain field. This reduced model could therefore be the first step towards interactive pressure ulcer prevention in a daily set-up.
Asunto(s)
Postura/fisiología , Úlcera por Presión/prevención & control , Presión/efectos adversos , Fenómenos Biomecánicos/fisiología , Análisis de Elementos Finitos , Humanos , Isquion/fisiología , Ciencia de los Materiales/métodos , Monitoreo Fisiológico/métodos , Rango del Movimiento Articular/fisiologíaRESUMEN
This paper introduces the recently developed TexiCare device that aims at preventing pressure ulcers for people with spinal cord injury. This embedded device is aimed to be mounted on the user wheelchair. Its sensor is 100% textile and allows the measurement of pressures at the interface between the cushion and the buttocks. It is comfortable, washable and low cost. It is connected to a cigarette-box sized unit that (i) measures the pressures in real time, (ii) estimates the risk for internal over-strains, and (iii) alerts the wheelchair user whenever necessary. The alert method has been defined as a result of a utility/usability/acceptability study conducted with representative end users. It is based on a tactile-visual feedback (via a watch or a smartphone for example): the tactile modality is used to discreetly alarm the person while the visual modality conveys an informative message. In order to evaluate the usability of the TexiCare device, a paraplegic volunteer equipped his wheelchair at home during a six months period. Interestingly, the first results revealed bad habits such as an inadequate posture when watching TV, rare relief maneuvers, and the occurrence of abnormal high pressures.
Asunto(s)
Paraplejía/complicaciones , Úlcera por Presión/etiología , Úlcera por Presión/prevención & control , Textiles , Silla de Ruedas , Anciano , Diseño de Equipo , Humanos , Masculino , Proyectos Piloto , Presión , VoluntariosRESUMEN
Diabetic foot ulcers are triggered by mechanical loadings applied to the surface of the plantar skin. Strain is considered to play a crucial role in relation to ulcer etiology and can be assessed by Finite Element (FE) modeling. A difficulty in the generation of these models is the choice of the soft tissue material properties. In the literature, many studies attempt to model the behavior of the heel soft tissues by implementing constitutive laws that can differ significantly in terms of mechanical response. Moreover, current FE models lack of proper evaluation techniques that could estimate their ability to simulate realistic strains. In this article, we propose and evaluate a FE model of the human heel for diabetic foot ulcer prevention. Soft tissue constitutive laws are defined through the fitting of experimental stretch-stress curves published in the literature. The model is then evaluated through Digital Volume Correlation (DVC) based on non-rigid 3D Magnetic Resonance Image Registration. The results from FE analysis and DVC show similar strain locations in the fat pad and strain intensities according to the type of applied loads. For additional comparisons, different sets of constitutive models published in the literature are applied into the proposed FE mesh and simulated with the same boundary conditions. In this case, the results in terms of strains show great diversity in locations and intensities, suggesting that more research should be developed to gain insight into the mechanical properties of these tissues.
Asunto(s)
Diabetes Mellitus , Pie Diabético , Humanos , Talón/fisiología , Pie Diabético/prevención & control , Análisis de Elementos Finitos , Fenómenos Biomecánicos , Piel , Estrés MecánicoRESUMEN
Tissues' nearly incompressibility was well reported in the literature but little effort has been made to compare volume variations computed by simulations with in vivo measurements. In this study, volume changes of the fat pad during controlled indentations of the human heel region were estimated from segmented medical images using digital volume correlation. The experiment was reproduced using finite element modelling with several values of Poisson's ratio for the fat pad, from 0.4500 to 0.4999. A single value of Poisson's ratio could not fit all the indentation cases. Estimated volume changes were between 0.9% - 11.7%.
RESUMEN
Skeletal muscle modeling has a vital role in movement studies and the development of therapeutic approaches. In the current study, a Huxley-based model for skeletal muscle is proposed, which demonstrates the impact of impairments in muscle characteristics. This model focuses on three identified ions: H+, inorganic phosphate Pi, and Ca2+. Modifications are made to actin-myosin attachment and detachment rates to study the effects of H+ and Pi. Additionally, an activation coefficient is included to represent the role of calcium ions interacting with troponin, highlighting the importance of Ca2+. It is found that maximum isometric muscle force decreases by 9.5% due to a reduction in pH from 7.4 to 6.5 and by 47.5% in case of the combination of a reduction in pH and an increase of Pi concentration up to 30 mM, respectively. Then the force decline caused by a fall in the active calcium ions is studied. When only 15% of the total calcium in the myofibrillar space is able to interact with troponin, up to 80% force drop is anticipated by the model. The proposed fatigued-injured muscle model is useful to study the effect of various shortening velocities and initial muscle-tendon lengths on muscle force; in addition, the benefits of the model go beyond predicting the force in different conditions as it can also predict muscle stiffness and power. The power and stiffness decrease by 40% and 6.5%, respectively, due to the pH reduction, and the simultaneous accumulation of H+ and Pi leads to a 50% and 18% drop in power and stiffness.
Asunto(s)
Calcio , Músculo Esquelético , Movimiento , TroponinaRESUMEN
Video-assisted thoracoscopic surgery (VATS) is a minimally invasive surgical technique for the diagnosis and treatment of early-stage lung cancer. During VATS, large lung deformation occurs as a result of a change of patient position and a pneumothorax (lung deflation), which hinders the intraoperative localization of pulmonary nodules. Modeling lung deformation during VATS for surgical navigation is desirable, but the mechanisms causing such deformation are yet not well-understood. In this study, we estimate, quantify and analyze the lung deformation occurring after a change of patient position during VATS. We used deformable image registration to estimate the lung deformation between a preoperative CT (in supine position) and an intraoperative CBCT (in lateral decubitus position) of six VATS clinical cases. We accounted for sliding motion between lobes and against the thoracic wall and obtained consistently low average target registration errors (under 1 mm). We observed large lung displacement (up to 40 mm); considerable sliding motion between lobes and against the thoracic wall (up to 30 mm); and localized volume changes indicating deformation. These findings demonstrate the complexity of the change of patient position phenomenon, which should necessarily be taken into account to model lung deformation for intraoperative guidance during VATS.
Asunto(s)
Neoplasias Pulmonares , Pared Torácica , Humanos , Cirugía Torácica Asistida por Video/métodos , Neoplasias Pulmonares/diagnóstico por imagen , Neoplasias Pulmonares/cirugía , Tomografía Computarizada por Rayos X/métodos , Pulmón/diagnóstico por imagen , Pulmón/cirugíaRESUMEN
Numerous models have been developed to describe the mechanical behavior of soft tissue in virtual reality medical environments. Very high credibility must be established before clinicians trust these simulations for diagnostic or treatment. Validating models to obtain the right compromise between accuracy and computational efficiency for the targeted medical application is a long, costly and time-consuming task. We have developed a freely available open-source framework for helping scientists in the difficult problem of evaluating and comparing biomechanical models in a more systematic and automatic manner.
Asunto(s)
Simulación por Computador/normas , Modelos Anatómicos , Diagnóstico por Imagen de Elasticidad , Imagenología TridimensionalRESUMEN
Medial open-wedge high tibial osteotomy is a surgical treatment for patients with a varus deformity and early-stage medial knee osteoarthritis. Observations suggest that this surgery can negatively affect the patellofemoral joint and change the patellofemoral kinematics. However, what causes these effects and how the correction angle can change the surgery's impact on the patellofemoral joint has not been investigated before. The objective of this study was to develop a biomechanical model that can predict the surgery's impact on the patellar position and find the correlation between the opening angles and the patellar position after the surgery. A combined finite element and multibody model of the lower limb was developed. The model's capabilities for predicting the patellofemoral kinematics were evaluated by performing a passive deep flexion simulation of the native knee and comparing the outcomes with magnetic resonance images of the study subject at various flexion angles. The model at a fixed knee flexion angle was then used to simulate the high tibial osteotomy surgery virtually. The results showed a correlation between the wedge opening angles and the patellar position in various degrees of freedom. These results indicate that larger wedge openings result in increased values of patellar distalization, lateral patellar shift, patellar rotation, and patellar internal tilt. The developed model in this study can be used in future studies to monitor the stress distribution on the patellar cartilage and connecting tissues to investigate their relationship with observations of pain and cartilage injury due to post-operative altered patellar kinematics.
Asunto(s)
Osteoartritis de la Rodilla , Articulación Patelofemoral , Fenómenos Biomecánicos , Humanos , Articulación de la Rodilla/cirugía , Extremidad Inferior , Osteoartritis de la Rodilla/cirugía , Osteotomía/métodos , Rótula/cirugía , Articulación Patelofemoral/cirugía , Tibia/cirugíaRESUMEN
Pressure ulcers are a severe disease affecting patients that are bedridden or in a wheelchair bound for long periods of time. These wounds can develop in the deep layers of the skin of specific parts of the body, mostly on heels or sacrum, making them hard to detect in their early stages. Strain levels have been identified as a direct danger indicator for triggering pressure ulcers. Prevention could be possible with the implementation of subject-specific Finite Element (FE) models. However, generation and validation of such FE models is a complex task, and the current implemented techniques offer only a partial solution of the entire problem considering only external displacements and pressures, or cadaveric samples. In this paper, we propose an in vivo solution based on the 3D non-rigid registration between two Magnetic Resonance (MR) images, one in an unloaded configuration and the other deformed by means of a plate or an indenter. From the results of the image registration, the displacement field and subsequent strain maps for the soft tissues were computed. An extensive study, considering different cases (on heel pad and sacrum regions) was performed to evaluate the reproducibility and accuracy of the results obtained with this methodology. The implemented technique can give insight for several applications. It adds a useful tool for better understanding the propagation of deformations in the heel soft tissues that could generate pressure ulcers. This methodology can be used to obtain data on the material properties of the soft tissues to define constitutive laws for FE simulations and finally it offers a promising technique for validating FE models.
Asunto(s)
Úlcera por Presión , Análisis de Elementos Finitos , Talón , Humanos , Espectroscopía de Resonancia Magnética , Presión , Úlcera por Presión/diagnóstico por imagen , Úlcera por Presión/prevención & control , Reproducibilidad de los ResultadosRESUMEN
In the last decade, the role of shearing loads has been increasingly suspected to play a determinant impact in the formation of deep pressure ulcers. In vivo observations of such deformations are complex to obtain. Previous studies only provide global measurements of such deformations without getting the quantitative values of the loads that generate these deformations. To study the role that shearing loads have in the etiology of heel pressure ulcers, an MR-compatible device for the application of shearing and normal loads was designed. Magnetic resonance imaging is a key feature that allows to monitor deformations of soft tissues after loading in a non-invasive way. Measuring applied forces in an MR-environment is challenging due to the impossibility to use magnetic materials. In our device, forces are applied through the compression of springs made of polylactide. Shearing and normal loads were applied on the plantar skin of the human heel through a flat plate while acquiring MR images. The device materials did not introduce any imaging artifact and allowed for high quality MR deformation measurements of the internal components of the heel. The obtained subject-specific results are an original data set that can be used in validations for Finite Element analysis and therefore contribute to a better understanding of the factors involved in pressure ulcer development.