Quality matters: Stoichiometry of resources modulates spatial feedbacks in aquatic-terrestrial meta-ecosystems.

Species dispersal and resource spatial flows greatly affect the dynamics of connected ecosystems. So far, research on meta-ecosystems has mainly focused on the quantitative effect of subsidy flows. Yet, resource exchanges at heterotrophic-autotrophic (e.g. aquatic-terrestrial) ecotones display a stoichiometric asymmetry that likely matters for functioning. Here, we joined ecological stoichiometry and the meta-ecosystem framework to understand how subsidy stoichiometry mediates the response of the meta-ecosystem to subsidy flows. Our model results demonstrate that resource flows between ecosystems can induce a positive spatial feedback loop, leading to higher production at the meta-ecosystem scale by relaxing local ecosystem limitations ('spatial complementarity'). Furthermore, we show that spatial flows can also have an unexpected negative impact on production when accentuating the stoichiometric mismatch between local resources and basal species needs. This study paves the way for studies on the interdependency of ecosystems at the landscape extent.

Landscape Structure Affects Metapopulation-Scale Tipping Points.

AbstractEven when environments deteriorate gradually, ecosystems may shift abruptly from one state to another. Such catastrophic shifts are difficult to predict and sometimes to reverse (so-called hysteresis). While well studied in simplified contexts, we lack a general understanding of how catastrophic shifts spread in realistically spatially structured landscapes. For different types of landscape structures, including typical terrestrial modular and riverine dendritic networks, we here investigate landscape-scale stability in metapopulations whose patches can locally exhibit catastrophic shifts. We find that such metapopulations usually exhibit large-scale catastrophic shifts and hysteresis and that the properties of these shifts depend strongly on the metapopulation spatial structure and on the population dispersal rate: an intermediate dispersal rate, a low average degree, or a riverine spatial structure can largely reduce hysteresis size. Our study suggests that large-scale restoration is easier with spatially clustered restoration efforts and in populations characterized by an intermediate dispersal rate.

Crossover From Individual to Collective Magnetism in Dense Nanoparticle Systems: Local Anisotropy Versus Dipolar Interactions.

Dense systems of magnetic nanoparticles may exhibit dipolar collective behavior. However, two fundamental questions remain unsolved: i) whether the transition temperature may be affected by the particle anisotropy or it is essentially determined by the intensity of the interparticle dipolar interactions, and ii) what is the minimum ratio of dipole-dipole interaction (Edd ) to nanoparticle anisotropy (Kef V, anisotropy⋅volume) energies necessary to crossover from individual to collective behavior. A series of particle assemblies with similarly intense dipolar interactions but widely varying anisotropy is studied. The Kef  is tuned through different degrees of cobalt-doping in maghemite nanoparticles, resulting in a variation of nearly an order of magnitude. All the bare particle compacts display collective behavior, except the one made with the highest anisotropy particles, which presents "marginal" features. Thus, a threshold of Kef V/Edd  ≈ 130 to suppress collective behavior is derived, in good agreement with Monte Carlo simulations. This translates into a crossover value of ≈1.7 for the easily accessible parameter TMAX (interacting)/TMAX (non-interacting) (ratio of the peak temperatures of the zero-field-cooled magnetization curves of interacting and dilute particle systems), which is successfully tested against the literature to predict the individual-like/collective behavior of any given interacting particle assembly comprising relatively uniform particles.

A Confinement-Driven Nucleation Mechanism of Metal Oxide Nanoparticles Obtained via Thermal Decomposition in Organic Media.

Thermal decomposition is a very efficient synthesis strategy to obtain nanosized metal oxides with controlled structures and properties. For the iron oxide nanoparticle synthesis, it allows an easy tuning of the nanoparticle's size, shape, and composition, which is often explained by the LaMer theory involving a clear separation between nucleation and growth steps. Here, the events before the nucleation of iron oxide nanocrystals are investigated by combining different complementary in situ characterization techniques. These characterizations are carried out not only on powdered iron stearate precursors but also on a preheated liquid reaction mixture. They reveal a new nucleation mechanism for the thermal decomposition method: instead of a homogeneous nucleation, the nucleation occurs within vesicle-like-nanoreactors confining the reactants. The different steps are: 1) the melting and coalescence of iron stearate particles, leading to "droplet-shaped nanostructures" acting as nanoreactors; 2) the formation of a hitherto unobserved iron stearate crystalline phase within the nucleation temperature range, simultaneously with stearate chains loss and Fe(III) to Fe(II) reduction; 3) the formation of iron oxide nuclei inside the nanoreactors, which are then ejected from them. This mechanism paves the way toward a better mastering of the metal oxide nanoparticles synthesis and the control of their properties.

Iron Stearate Structures: An Original Tool for Nanoparticles Design.

Iron carboxylates are widely used as iron precursors in the thermal decomposition process or considered as in situ formed intermediate precursors. Their molecular and three-dimensional (3D)-structural nature has been shown to affect the shape, size, and composition of the resulting iron oxide nanoparticles (NPs). Among carboxylate precursors, stearates are particularly attractive because of their higher stability to aging and hydration and they are used as additives in many applications. Despite the huge interest of iron stearates, very few studies aimed up to now at deciphering their full metal-ligand structures and the mechanisms allowing us to achieve in a controlled manner the bottom-up NP formation. In this work, we have thus investigated the molecular structure and composition of two iron stearate precursors, synthesized by introducing either two (FeSt2) or three (FeSt3) stearate (St) chains. Interestingly, both iron stearates consist of lamellar structures with planes of iron polynuclear complexes (polycations) separated with stearate chains in all-trans conformation. The iron content in polycations was found very different between both iron stearates. Their detailed characterizations indicate that FeSt2 is mainly composed of [Fe3-(µ3-O)St6·xH2O]Cl, with no (or few) free stearate, whereas FeSt3 is a mixture of mainly [Fe7(µ3-O(H))6(µ2-OH)xSt12-2x]St with some [Fe3(µ3-O)St6·xH2O]St and free stearic acid. The formation of bigger polynuclear complexes with FeSt3 was related to higher hydrolysis and condensation rates within the iron(III) chloride solution compared to the iron(II) chloride solution. These data suggested a nucleation mechanism based on the condensation of polycation radicals generated by the catalytic departure of two stearate chains from an iron polycation-based molecule.

Room Temperature Blocked Magnetic Nanoparticles Based on Ferrite Promoted by a Three-Step Thermal Decomposition Process.

Exchange coupled nanoparticles that combine hard and soft magnetic phases are very promising to enhance the effective magnetic anisotropy while preserving sizes below 20 nm. However, the core-shell structure is usually insufficient to produce rare earth-free ferro(i)magnetic blocked nanoparticles at room temperature. We report on onion-type magnetic nanoparticles prepared by a three-step seed mediated growth based on the thermal decomposition method. The core@shell@shell structure consists of a core and an external shell of Fe3-δO4 separated by an intermediate Co-doped ferrite shell. The double exchange coupling at both core@shell and shell@shell interfaces results in such an increased of the magnetic anisotropy energy, that onion-type nanoparticles of 16 nm mainly based on iron oxide are blocked at room temperature. We envision that these results are very appealing for potential applications based on permanent magnets.

Enhanced Collective Magnetic Properties in 2D Monolayers of Iron Oxide Nanoparticles Favored by Local Order and Local 1D Shape Anisotropy.

Magnetic nanoparticle arrays represent a very attractive research field because their collective properties can be efficiently modulated as a function of the structure of the assembly. Nevertheless, understanding the way dipolar interactions influence the intrinsic magnetic properties of nanoparticles still remains a great challenge. In this study, we report on the preparation of 2D assemblies of iron oxide nanoparticles as monolayers deposited onto substrates. Assemblies have been prepared by using the Langmuir-Blodgett technique and the SAM assisted assembling technique combined to CuAAC "click" reaction. These techniques afford to control the formation of well-defined monolayers of nanoparticles on large areas. The LB technique controls local ordering of nanoparticles, while adjusting the kinetics of CuAAC "click" reaction strongly affects the spatial arrangement of nanoparticles in monolayers. Fast kinetics favor disordered assemblies while slow kinetics favor the formation of chain-like structures. Such anisotropic assemblies are induced by dipolar interactions between nanoparticles as no magnetic field is applied and no solvent evaporation is performed. The collective magnetic properties of monolayers are studied as a function of average interparticle distance, local order and local shape anisotropy. We demonstrate that local control on spatial arrangement of nanoparticles in monolayers significantly strengthens dipolar interactions which enhances collective properties and results in possible super ferromagnetic order.

Photothermal and mechanical stimulation of cells via dualfunctional nanohybrids.

Stimulating cells by light is an attractive technology to investigate cellular function and deliver innovative cell-based therapy. However, current techniques generally use poorly biopermeable light, which prevents broad applicability. Here, we show that a new type of composite nanomaterial, synthesized from multi-walled carbon nanotubes, magnetic iron nanoparticles, and polyglycerol, enables photothermal and mechanical control of Ca2+ influx into cells overexpressing transient receptor potential vanilloid type-2. The nanohybrid is simply operated by application of highly biotransparent near-infrared light and a magnetic field. The technology may revolutionize remote control of cellular function.

Selective Nanotrench Filling by One-Pot Electroclick Self-Constructed Nanoparticle Films.

Integration of nanoparticles (NPs) into nanodevices is a challenge for enhanced sensor development. Using NPs as building blocks, a bottom-up approach based on one-pot morphogen-driven electroclick chemistry is reported to self-construct dense and robust conductive Fe3O4 NP films. Deposited covalent NP assemblies establish an electrical connection between two gold electrodes separated by a 100 nm-wide nanotrench.

The interplay of facilitation and competition drives the emergence of multistability in dryland plant communities.

Within communities, species are wrapped in a set of feedbacks with each other and with their environment. When such feedbacks are strong enough they can generate alternative stable states. So far, research on alternative stable states has mostly focused on systems with a small number of species and a limited diversity of interaction types. Here, we analyze a spatial model of plant community dynamics in stressed ecosystems such as drylands, where each species is characterized by a strategy, and the different species interact through facilitation and competition for space and resources, such as water. We identify three different types of multistability emerging from the interplay of competition and facilitation. Under low-stress levels, plant communities organize in small groups of coexisting species, maintained by space, competition and facilitation ("cliques"). Under higher stress levels, positive feedback from facilitation lead to the dominance of a single facilitating species ("mutual exclusion states"). At the highest stress levels, the single facilitating species left in the system coexists with the desert state. By linking community ecology and alternative stable states theory using a spatial plant community model for stressed ecosystems, our study contributes to highlight the importance of positive feedback loops for the stability of ecological communities.

Magnetic anisotropy engineering in onion-structured metal oxide nanoparticles combining dual exchange coupling and proximity effects.

A series of exchange-coupled magnetic nanoparticles combining several magnetic phases in an onion-type structure were synthesized by performing a three-step seed-mediated growth process. Iron and cobalt precursors were alternatively decomposed in high-boiling-temperature solvents (288-310 °C) to successively grow CoO and Fe3-δO4 shells (the latter in three stages) on the surface of Fe3-δO4 seeds. The structure and chemical composition of these nanoparticles were investigated in depth by combining a wide panel of advanced techniques, such as scanning transmission electron microscopy (STEM), electron energy-loss spectroscopy-spectrum imaging (EELS-SI), 57Fe Mössbauer spectrometry, and X-ray circular magnetic dichroism (XMCD) techniques. The size of the nanoparticles increased progressively after each thermal decomposition step, but the crystal structure of core-shell nanoparticles was significantly modified during the growth of the second shell. Indeed, the antiferromagnetic CoO phase was progressively replaced by the CoFe2O4 ferrimagnet due to the concomitant processes of partial solubilization/crystallization and the interfacial cationic diffusion of iron. A much more complex chemical structure than that suggested by a simple size variation of the nanoparticles is thus proposed, namely Fe3-δO4@CoO-CoFe2O4@Fe3-δO4, where an intermediate Co-based layer was shown to progressively become a single, hybrid magnetic phase (attributed to proximity effects) with a reduction in the CoO amount. In turn, the dual exchange-coupling of this hybrid Co-based intermediate layer (with high anisotropy and ordering temperature) with the surrounding ferrite (core and outer shells) stabilized the particle moment well above room temperature. These effects allow for the production of Fe oxide-based magnetic nanoparticles with high effective anisotropy, thus revealing the potential of this strategy to design rare-earth-free permanent nanomagnets at room temperature.

Self-assembly of bridged silsesquioxanes: modulating structural evolution via cooperative covalent and noncovalent interactions.

The self-assembly of a bis-urea phenylene-bridged silsesquioxane precursor during sol-gel synthesis has been investigated by in situ infrared spectroscopy, optical microscopy, and light scattering. In particular, the evolution of the system as a function of processing time was correlated with covalent interactions associated with increasing polycondensation and noncovalent interactions such as hydrogen bonding. A comprehensive mechanism based on the hydrolysis of the phenylene-bridged organosilane precursor prior to the crystallization of the corresponding bridged silsesquioxane via H-bonding and subsequent irreversible polycondensation is proposed.

Genotoxic and mutagenic effects of lipid-coated CdSe/ZnS quantum dots.

We proposed to evaluate the genotoxicity and mutagenicity of a new quantum dots (QDs) nanoplatform (QDsN), consisting of CdSe/ZnS core-shell QDs encapsulated by a natural fusogenic lipid (1,2-di-oleoyl-sn-glycero-3-phosphocholine (DOPC)) and functionalized by a nucleolipid N-[5'-(2',3'-di-oleoyl) uridine]-N',N',N'-trimethylammoniumtosylate (DOTAU). This QDs nanoplatform may represent a new therapeutic tool for the diagnosis and treatment of human cancers. The genotoxic, mutagenic and clastogenic effects of QDsN were compared to those of cadmium chloride (CdCl(2)). Three assays were used: (1) the Salmonella/microsome assay with four tester strains, (2) the comet assay and (3) the micronucleus test on CHO cells. The contribution of simulated sunlight was studied in the three assays while oxidative events were only explored in the comet assay in aliquots pretreated with the antioxidant l-ergothioneine. We found that QDsN could enter CHO-K1 cells and accumulate in cytoplasmic vesicles. It was not mutagenic in the Salmonella/mutagenicity test whereas CdCl(2) was weakly positive. In the dark, both the QDsN and CdCl(2) similarly induced dose-dependent increases in single-strand breaks and micronuclei. Exposure to simulated sunlight significantly potentiated the genotoxic activities of both QDsN and CdCl(2), but did not significantly increase micronucleus frequencies. l-Ergothioneine significantly reduced but did not completely suppress the DNA-damaging activity of QDsN and CdCl(2). The present results clearly point to the genotoxic properties and the risk of long-term adverse effects of such a nanoplatform if used for human anticancer therapy and diagnosis in the future.

Co-tunneling enhancement of the electrical response of nanoparticle networks.

A co-tunneling charge-transfer process dominates the electrical properties of a nanometer-sized "slice" in a nanoparticle network, which results in universal scaling of the conductance with temperature and bias voltage, as well as enhanced spintronics properties. By designing two large (10 µm) electrodes with short (60 nm) separation, access is obtained to transport dominated by charge transfer involving "nanoslices" made of three nanoparticles only. Magnetic iron oxide nanoparticle networks exhibit a magnetoresistance ratio that is not reachable by tunneling or hopping processes, thereby illustrating how such a size-matched planar device with dominant co-tunneling charge-transfer process is optimal for realizing multifunctional devices with enhanced change of conductance under external stimulus.

Tunable magnetic properties of nanoparticle two-dimensional assemblies addressed by mixed self-assembled monolayers.

Assemblies of magnetic nanoparticles (NPs) are intensively studied due to their high potential applications in spintronic, magnetic and magneto-electronic. The fine control over NP density, interdistance, and spatial arrangement onto substrates is of key importance to govern the magnetic properties through dipolar interactions. In this study, magnetic iron oxide NPs have been assembled on surfaces patterned with self-assembled monolayers (SAMs) of mixed organic molecules. The modification of the molar ratio between coadsorbed 11-mercaptoundecanoic acid (MUA) and mercaptododecane (MDD) on gold substrates is shown to control the size of NPs domains and thus to modulate the characteristic magnetic properties of the assemblies. Moreover, NPs can be used to indirectly probe the structure of SAMs in domains at the nanometer scale.

A Detailed Investigation of the Onion Structure of Exchanged Coupled Magnetic Fe3-δO4@CoFe2O4@Fe3-δO4 Nanoparticles.

Nanoparticles that combine several magnetic phases offer wide perspectives for cutting edge applications because of the high modularity of their magnetic properties. Besides the addition of the magnetic characteristics intrinsic to each phase, the interface that results from core-shell and, further, from onion structures leads to synergistic properties such as magnetic exchange coupling. Such a phenomenon is of high interest to overcome the superparamagnetic limit of iron oxide nanoparticles which hampers potential applications such as data storage or sensors. In this manuscript, we report on the design of nanoparticles with an onion-like structure which has been scarcely reported yet. These nanoparticles consist of a Fe3-δO4 core covered by a first shell of CoFe2O4 and a second shell of Fe3-δO4, e.g., a Fe3-δO4@CoFe2O4@Fe3-δO4 onion-like structure. They were synthesized through a multistep seed-mediated growth approach which consists consists in performing three successive thermal decomposition of metal complexes in a high-boiling-point solvent (about 300 °C). Although TEM micrographs clearly show the growth of each shell from the iron oxide core, core sizes and shell thicknesses markedly differ from what is suggested by the size increasing. We investigated very precisely the structure of nanoparticles in performing high resolution (scanning) TEM imaging and geometrical phase analysis (GPA). The chemical composition and spatial distribution of atoms were studied by electron energy loss spectroscopy (EELS) mapping and spectroscopy. The chemical environment and oxidation state of cations were investigated by 57Fe Mössbauer spectrometry, soft X-ray absorption spectroscopy (XAS) and X-ray magnetic circular dichroism (XMCD). The combination of these techniques allowed us to estimate the increase of Fe2+ content in the iron oxide core of the core@shell structure and the increase of the cobalt ferrite shell thickness in the core@shell@shell one, whereas the iron oxide shell appears to be much thinner than expected. Thus, the modification of the chemical composition as well as the size of the Fe3-δO4 core and the thickness of the cobalt ferrite shell have a high impact on the magnetic properties. Furthermore, the growth of the iron oxide shell also markedly modifies the magnetic properties of the core-shell nanoparticles, thus demonstrating the high potential of onion-like nanoparticles to accurately tune the magnetic properties of nanoparticles according to the desired applications.

Nematic-like organization of magnetic mesogen-hybridized nanoparticles.

A fluid nematic-like phase is induced in monodisperse iron oxide nanoparticles with a diameter of 3.3 nm. This supramolecular arrangement is governed by the covalent functionalization of the nanoparticle surface with cyanobiphenyl-based ligands as mesogenic promoters. The design and synthesis of these hybrid materials and the study of their mesogenic properties are reported. In addition, the modifications of the magnetic properties of the hybridized nanoparticles are investigated as a function of the different grafted ligands. Owing to the rather large interparticular distances (about 7 nm), the dipolar interaction between nanoparticles is shown to play only a minor role. Conversely, the surface magnetic anisotropy of the particles is significantly affected by the surface derivatization.

In situ X-ray measurements to probe a new solid-state polycondensation mechanism for the design of supramolecular organo-bridged silsesquioxanes.

A long-range ordered organic/inorganic material is synthesized from a bis-silane, (EtO)(3)Si-(CH(2))(3)-NHCONH-C(6)H(4)-NHCONH-(CH(2))(3)-Si(OEt)(3). This crosslinked sol-gel solid exhibits a supramolecular organization via intermolecular hydrogen bonding interactions between urea groups (-NHCONH-) and covalent siloxane bonding, triple bond Si-O-Si triple bond. Time-resolved in situ X-ray measurements (coupling small- and wide-angle X-ray scattering techniques) are performed to follow the different steps involved in the synthetic process. A new mechanism based on the crystallization of the hydrolyzed species followed by their polycondensation in solid state is proposed.

Strong interfacial coupling through exchange interactions in soft/hard core-shell nanoparticles as a function of cationic distribution.

Exchange coupled core-shell nanoparticles present high potential to tune adequately the magnetic properties for specific applications such as nanomedicine or spintronics. Here, we report on the design of core-shell nanoparticles by performing the successive thermal decomposition of Fe and Co complexes. Depending on the thermal stability and the concentration of the Co precursor, we were able to control the formation of a hard ferrimagnetic (FiM) Co-ferrite shell or an antiferromagnetic (AFM) CoO shell at the surface of a soft FiM Fe3-δO4 core. The formation of the Co-ferrite shell was also found to occur through two different mechanisms: the diffusion of Co or the growth at the iron oxide surface. The structural properties of core-shell nanoparticles were investigated by a wide panel of techniques such as HAADF, STEM and XRD. The distribution of Fe and Co elements in the crystal structure was described accurately by XAS and XMCD. The operating conditions influenced significantly the oxidation rate of Fe2+ in the core as well as the occupancy of Oh sites by Fe2+ and Co2+ cations. The structural properties of nanoparticles were correlated with their magnetic properties which were investigated by SQUID magnetometry. Each core-shell nanoparticle displayed enhanced effective magnetic anisotropy energy (Eeff) in comparison with pristine Fe3-δO4 nanoparticles because of magnetic coupling at the core-shell interface. The Co-ferrite FiM shells resulted in better enhancement of Eeff than a CoO AFM shell. In addition, the magnetic properties were also influenced by the core size. The coercive field (HC) was increased by core reduction while the blocking temperature (TB) was increased by a larger core. Element-specific XMCD measurements showed the fine coupling of Fe and Co cations which agree with Co-ferrite in each sample, e.g. the formation of a Co-doped interfacial layer in the Fe3-δO4@CoO nanoparticles.

Highly Efficient Wideband Microwave Absorbers Based on Zero-Valent Fe@γ-Fe2O3 and Fe/Co/Ni Carbon-Protected Alloy Nanoparticles Supported on Reduced Graphene Oxide.

Electronic systems and telecommunication devices based on low-power microwaves, ranging from 2 to 40 GHz, have massively developed in the last decades. Their extensive use has contributed to the emergence of diverse electromagnetic interference (EMI) phenomena. Consequently, EMI shielding has become a ubiquitous necessity and, in certain countries, a legal requirement. Broadband absorption is considered the only convincing EMI shielding solution when the complete disappearance of the unwanted microwave is required. In this study, a new type of microwave absorber materials (MAMs) based on reduced graphene oxide (rGO) decorated with zero-valent Fe@γ-Fe2O3 and Fe/Co/Ni carbon-protected alloy nanoparticles (NPs) were synthesized using the Pechini sol-gel method. Synthetic parameters were varied to determine their influence on the deposited NPs size and spatial distribution. The deposited superparamagnetic nanoparticles were found to induce a ferromagnetic resonance (FMR) absorption process in all cases. Furthermore, a direct relationship between the nanocomposites' natural FMR frequency and their composition-dependent saturation magnetization (Ms) was established. Finally, the microwave absorption efficiency (0.4 MHz to 20 GHz) of these new materials was found to range from 60% to 100%, depending on the nature of the metallic particles grafted onto rGO.