Bicuspid aortic valve repair with external or subcommissural annuloplasty-echocardiographic prospective trial.

BACKGROUND: The incompetent bicuspid aortic valve (BAV) can be repaired using various techniques. This study presents a prospective comparison of external and subcommissural aortic annuloplasty. METHODS: Fifty consecutive patients (38 males, age: 43.9 ± 15.8 years) with BAV insufficiency with or without aortic dilatation underwent valve repair in a single institution. They were prospectively allocated to one of two groups based on the aortic annulus stabilization technique: 25 patients were operated on using the subcommissural annuloplasty (SCA) and 25 using the external complete annuloplasty (EA). Transthoracic echocardiography was performed in all patients before the operation and 1 and 3 years after the operation. Moreover, mortality and morbidity at 7 years were evaluated. RESULTS: In prospective echocardiographic comparison, EA was associated with smaller diameter of the aortic annulus (24.1 ± 2.6 mm vs. 25.8±2.1 mm, p < .05) and lower mean and peak transvalvular gradients (7 ± 4 mmHg vs. 13 ± 4 mmHg, p = .02 and 15.3 ± 9.7 mmHg vs. 20.7 ± 5.6 mmHg, p = .03, respectively). No patients died or required reoperation due to recurrent insufficiency at 6,81 (interquartile range-0,17) years after the operation. The Kaplan-Meier actuarial freedom from aortic regurgitation (AR) grade =2 or gradient > 20 mmHg at 35.1 ± 3.6 months years was 96% (24 out of 25) for patients who had external annuloplasty and amounted to 76% (19 out of 25) for those who had SCA, p = .05). CONCLUSIONS: External annuloplasty performed during repair of the BAV is associated with better hemodynamics at medium-term follow-up compared to SCA.

Application of strain and other echocardiographic parameters in the evaluation of early and long-term clinical outcomes after cardiac surgery revascularization.

BACKGROUND: Coronary artery bypass graft (CABG) surgery is an effective therapeutic strategy for coronary heart disease (CHD). Myocardial longitudinal strain echocardiography with 2D speckle tracking could obtain ventricular function with better accuracy and reliability than the left ventricular ejection fraction. The aim of the study was to assess changes in left ventricular function in patients before and after surgical revascularization for a 24-month period of observation, using echocardiography with speckle tracking strain imaging. We searched for echocardiographic predictors of poor early and long-term outcome after CABG. METHODS: We enrolled 69 patients scheduled for elective coronary bypass grafting. Patients were divided into groups based on pre-operative systolic and diastolic parameters, depending on the GLS value and the E' Lat and E/E' value. The correlation between these parameters and early and long-term outcomes was analyzed. RESULTS: Preoperative EF was preserved in 86, 95% (60) patients. Pre-operative reduced GLS was observed in 73.91% (51) of patients and severely reduced in 31.88% (22). In the first post-operative 6-month period, we observed a significant decrease in the GLS. The GLS was a predictor of early postoperative outcome for intubation time, the inotropes use and length of ICU stay. Diastolic dysfunction was a predictor of the greater inotrope requirements. CONCLUSIONS: Global longitudinal strain and diastolic dysfunction parameters are a good predictors of worse early outcome after CABG.

In Vitro Evaluation of Aortic Stent Graft Deployment Accuracy in the Distal Landing Zone.

OBJECTIVES: Thoracic endovascular aortic repair technology focuses on accurately deploying the stent graft in the proximal landing zone in the proximal to distal direction. The aim of this in vitro study was to evaluate the accuracy of stent graft deployment in the distal landing zone. METHODS: It was hypothesised that a reverse implantation mechanism (in a distal to proximal deployment direction, when the operator starts to open the endoprosthesis from distal to proximal), might enhance landing accuracy in the distal LZ. The aim was to investigate this hypothesis by implanting stent grafts into the 3D printed aortas with the currently available deployment mechanism. Based on two human patients' computed tomography angiography scans, two aortas were 3D printed at 1:1 scale: "straight" and "crooked" aortas with distal aortic tortuosity of 1.006 and 1.078, respectively. They were used in order to test three endoprostheses (E-vita THORACIC 3G, Relay Plus, Valiant Captivia) 10 times by implanting them in three ways: proximal landing in the aneurysm, proximal landing in another stent graft, reverse implantation (via simulated antegrade access). The aim was to land just above the target vessel's upper edge. The distance to the target vessel and wedge apposition were assessed under a direct view using caliper. RESULTS: The distance to the target vessel was 3 mm (IQR 0; 8) if the stent graft landed proximally in aneurysm, 2 mm (IQR 0; 5) if it landed proximally in another stent graft, and 0 mm (IQR 0; 0) when reverse implantation was applied. The distance to the target vessel measuring 5 mm or occurred in 45%, 30%, and 0%, respectively. Overall the median wedge apposition after stent graft implantation was 0 mm (IQR 0; 0) in the "straight" versus 18 mm (IQR 15; 20) in the "crooked" aorta (p < .001). CONCLUSIONS: Reverse stent graft deployment is associated with more accurate landing in the distal landing zone. Distal aortic tortuosity constitutes an important impediment to covering the distal LZ's entire circumference with a stent graft.

The evaluation of the aortic annulus displacement during cardiac cycle using magnetic resonance imaging.

BACKGROUND: The stress in the ascending aorta results from many biomechanical factors including the geometry of the vessel and its maximum dimensions, arterial blood pressure and longitudinal systolic stretching due to heart motion. The stretching of the ascending aorta resulting from the longitudinal displacement of the aortic annulus during the heart cycle has not been examined in the general population so far. The aim of the study is to evaluate this parameter using cardiovascular magnetic resonance (CMR) imaging in the general population in all age groups. METHODS: The cardiac magnetic resonance images of 73 patients were evaluated. The maximum distance to which the ventriculo-aortic junction was pulled by the contracting heart (LDAA - longitudinal displacement of the aortic annulus) was measured in the cine coronal sequences. Moreover, the maximum dimensions of the aortic root and the ascending aorta were assessed. RESULTS: The LDAA value was on average 11.6 ± 2.9 mm (range: 3-19 mm; 95% CI: 10.9-12.3 mm) and did not differ between males and females (11.8 ± 2.9 mm vs. 11.2 ± 2.9 mm, p = .408). The diameter of the ascending aorta was 32 ± 6.3 mm (range: 20-57 mm). The maximal dimension of the aortic root was 35 ± 5.1 mm (range: 18-42 mm). There was a statistically significant negative correlation between the LDAA and the age of patients (r = -.38, p = .001). There was no significant correlation between the LDAA and aortic root dimension (r = .1, p = .409) and between the LDAA and diameter of the ascending aorta (r = .16, p = .170). CONCLUSIONS: Human aortic root and ascending aorta are significantly stretched during systole and the distance to which the aorta is stretched decreases with age. The measurement of the longitudinal displacement of the aortic annulus using the CMR is feasible and reproducible.

The combined impact of mechanical factors on the wall stress of the human ascending aorta - a finite elements study.

BACKGROUND: Biomechanical factors influence stress in the aortic wall. The aim of this study was to assess how the diameter and shape of the vessel, blood pressure and longitudinal systolic aortic stretching (SAS) caused by the contraction of the myocardium influence stress in the aortic wall. METHODS: Three computational models of the non-dilated aorta and aneurysms of the ascending aorta and aortic root were created. Then, finite elements analyses were carried out. The models were subjected to blood pressure (120 mmHg and 160 mmHg) and longitudinal systolic aortic stretching (0 mm, 5 mm, 10 mm and 15 mm). The influence of wall elasticity was examined too. RESULTS: Blood pressure had a smaller impact on the stress than the SAS. An increase in blood pressure from120 mmHg to 160 mmHg increased the peak wall stress (PWS) on average by 0.1 MPa in all models. A 5 mm SAS caused a 0.1­0. 2 MPa increase in PWS in all the models. The increase in PWS caused by a 10mm and 15mmSAS was 0.2 MPa and 0. 4 MPa in the non-dilated aorta, 0.2­0.3 MPa and 0.3­0.5 MPa in the aneurysm of the ascending aorta, and 0.1­0.2 MPa and 0.2­0.3 MPa in the aortic root aneurysm model, respectively. The loss of elasticity of the aneurysmal wall resulted in an increase of PWS by 0.1­0.2 MPa. CONCLUSIONS: Aortic geometry, wall stiffness, blood pressure and SAS have an impact on PWS. However, SAS had the biggest impact on wall stress. The results of this study may be useful in future patient-specific computational models used to assess the risk of aortic complications.

Role of vascular endothelial growth factor in inducing production of angiopoetin-1 - in vivo study in Fisher rats.

The aim of the study was to investigate how an intramuscular injection of plasmids with genes coding various pro-angiogenic factors: angiopoetin-1 (ANGPT1), vascular endothelial growth factor (VEGF165) and hepatic growth factor (HGF), influences the production of ANGPT1. 40 Healthy Fisher rats received i.m. injections containing plasmids encoding pro-angiogenic genes in thigh muscles. They were divided into four equal groups. The first group received the plANGPT1 plasmid and the second group- the pIRES/ANGPT1/VEGF165 bicistronic plasmid. The pIRES/VEGF165/HGF bicistronic plasmid was administered to the third group and an empty plasmid (control group) to the fourth group. The animals were euthanized after 12 weeks. In each group, the number of vessels stained with the anti-ANGPT1 antibody was assessed under an optical microscope. The anti-ANGPT1 antibodies stained the vessels in all the groups. There were on average 14.1 ±2.3 vessels in the the plANGPT1 group, 32.5 ±10.5 in the pl/RESANGPT1/VEGF group and 30.8 ±13.3 in the plRES/HGV/VEGF group. There were on average 7.3 ±2.3 stained vessels (p < 0.0001) in the control group . The VEGF plays a role in the induction of the production of ANGPT1. The administration of plasmids only encoding ANGPT1 does not induce its production.

Lack of adenovirus DNA in mediastinal adipose tissue of obese/overweight adults with cardiovascular disorders?

Mediastinal adipose tissue can be found on the anterior surface of pericardial sac below the remnants of the thymus. On the basis of previous studies describing adenoviruses (AdVs) as a causative factor of obesity, the causative relation between the presence of AdVs and an increased accumulation of mediastinal adipose tissue was studied. The study included 25 obese/overweight subjects with cardiac disorders. Specimens from fat deposits from the anterior mediastinum were collected during cardiac surgery procedures. Afterwards, PCR was used to detect AdV-DNA. No AdV-DNA could be detected in adipose tissue. An association between an excessive accumulation of mediastinal adipose tissue and an AdV-infection in the development of accompanying cardiac disorders was excluded.

A meta analysis and systematic review of wrapping of the ascending aorta.

BACKGROUND: One of the methods of dealing with a dilated ascending aorta is to decrease its diameter using external wrapping. This exovascular procedure is regarded by many surgeons as controversial. The aim of the study was to evaluate the safety and efficacy of external wrapping of the ascending aorta. METHODS: A metaanalysis and systematic review of studies reporting mid-term and long-term results of wrapping of the ascending aorta were performed. The postoperative hospital mortality, aortic-related mortality, significant redilatation rate, and need for aortic reoperation were analyzed. RESULTS: 17 manuscripts were included in the final analysis and postoperative data of 722 patients were studied. The mean age of patients was 58 years and mean follow-up was 62 months. Hospital mortality was 1.5% (11 deaths). During the follow-up late aortic related mortality was noted in two patients (0.3%), there were 12 (1.7%) cases of significant redilatation of the ascending aorta, and 13 (1.8%) patients had to have their ascending aorta reoperated. All of the aortic complications were noted in patients who either did not have their external wrapping sutured to the aorta or who underwent concomitant aortoplasty. CONCLUSIONS: The results of the metaanalysis suggest that external aortic wrapping may be considered as a safe operative technique. In patients with a moderately dilated aorta it offers good mid-term and long-term outcome compared to replacement of the ascending aorta.

Intra- and interobserver reliability in measuring aortic root rotation with cardiac magnetic resonance imaging.

Background: The rotational position of the aortic root (AoR) is of substantial clinical interest as it has been associated with severe aortic complications, such as aortic dissections. We described a cardiac magnetic resonance (CMR)-based method for measuring AoR rotation and evaluated the reliability of measurements. Methods: CMR was used for measuring AoR rotation in 50 consecutive healthy subjects. Intra- and interobserver reliability were assessed by comparing repeated measurements by the same analyst and by three independent analysts. The angles of the non-coronary sinus (NCS), right coronary sinus (RCS), and left coronary sinus (LCS) were measured relative to the interatrial septum (IAS). The angle between IAS and posterior atrial wall was measured to examine the reliability of the IAS as a key anatomical landmark. Intra- and interobserver agreement were determined using intraclass correlation coefficients (ICCs). Results: Images of 47/50 (94%) subjects were analyzed; three were excluded due to insufficient image quality. The mean ± standard deviation (SD) AoR rotation angles of NCS, RCS, and LCS were 25.9°±12.9°, 37.5°±15.2°, and 97.0°±13.1°, respectively. For measurements of AoR rotation, both intraobserver [NCS: ICC =0.94, 95% confidence interval (CI): 0.88-0.96; RCS: ICC =0.93, 95% CI: 0.87-0.96; LCS: ICC =0.91, 95% CI: 0.84-0.95] and interobserver agreement (NCS: ICC =0.90, 95% CI: 0.84-0.94; RCS: ICC =0.86, 95% CI: 0.77-0.92; LCS: ICC =0.87, 95% CI: 0.80-0.92) were excellent. The IAS angle was 79.2°±8.9°; its intraobserver agreement was somewhat higher (ICC =0.94, 95% CI: 0.88-0.96) than the interobserver agreement (ICC =0.76, 95% CI: 0.63-0.85). Conclusions: The present study in healthy subjects reports a CMR-based approach for measuring AoR rotation. CMR allows to quantify AoR rotation with excellent intra- and interobserver agreement.

Early aortic growth in acute descending aortic dissection.

OBJECTIVES: Acute aortic dissection leads to the destabilization of the aortic wall, followed by an immediate increase in aortic diameter. It remains unclear how the aortic diameter changes during the dissection's acute and subacute phases. The aim of this study was to evaluate the change in aortic geometry within 30 days after the onset of a descending aortic dissection. METHODS: Patients with acute type B and non-A non-B dissection who had at least 2 computed tomography angiography scans obtained within 30 days after the onset of dissection were evaluated. Exclusion criteria were a thrombosed false lumen, connective tissue disorders and endovascular or open aortic repair performed prior to the second computed tomography angiography. RESULTS: Among 190 patients with acute aortic dissection, 42 patients met our inclusion criteria. Their aortic geometry was analysed according to the computed tomography angiography scans obtained between 0-3 (N = 35), 4-7 (N = 9) and 8-30 (N = 12) days after the dissection onset. The highest aortic diameter growth rate was observed in the first quartile of the thoracic aorta and measured 0.66 (0.06; 1.03), 0.29 (-0.01; 0.41) and 0.06 (-0.13; 0.26) mm/day at 0-3, 4-7 and 8-30 days after the dissection, respectively. Proximal entry location (P = 0.037) and entry located at the arch concavity (P = 0.008) were associated with a higher aortic diameter increase. CONCLUSIONS: Early rapid growth occurs during the first week after the descending aortic dissection-most intensely over the first 3 days, and this is associated with the location of the dissection's entry.

Intraoperative postinfarct ventricular septal rupture during coronary bypass grafting.

We report a case of a ventricular septal rupture (VSR) which occurred during coronary artery bypass grafting (CABG) operation. The procedure took place 5 days after ST-elevation myocardial infarction of the inferior wall. The VSR repair was not performed at the time of the CABG operation. The intention was to wait until scar formation occurs to facilitate the repair. The patient was supported with venoarterial extracorporeal membranous oxygenation (VA-ECMO) and additional intra-aortic balloon pump (IABP) on intensive care unit. Ten days after CABG the patient underwent a successful VSR repair and 5 days later was weaned from VA-ECMO. He was discharged from hospital 6 weeks after the initial CABG. This case report underlines the importance of VA-ECMO and a multidisciplinary approach with frequent examination of haemodynamic state in the treatment of patients with mechanical complications of myocardial infarction who are not suitable for immediate repair.

Systolic stretching of the ascending aorta.

INTRODUCTION: Longitudinal stretching of the aorta due to systolic heart motion contributes to the stress in the wall of the ascending aorta. The objective of this study was to assess longitudinal systolic stretching of the aorta and its correlation with the diameters of the ascending aorta and the aortic root. MATERIAL AND METHODS: Aortographies of 122 patients were analyzed. The longitudinal systolic stretching of the aorta caused by the contraction of the heart during systole and the maximum dimensions of the aortic root and ascending aorta were measured in all patients. RESULTS: The maximum dimension of the aortic root was on average 34.9 ±4.5 mm and the mean diameter of the ascending aorta was 33.9 ±5.4 mm. The systolic aortic stretching negatively correlated with age (r = -0.49, p < 0.001) and the diameter of the tubular ascending aorta (r = -0.44, p < 0.001). There was no significant correlation between the stretching and the dimension of the aortic root (r = -0.11, p = 0.239). There was a statistically significant (p < 0.001) difference in the longitudinal aortic stretching values between patients with a normal aortic valve (10.6 ±3.1 mm) and an aortic valve pathology (8.0 ±3.2 mm in all patients with an aortic valve pathology; 7.5 ±4.3 mm in isolated aortic stenosis, 8.5 ±2.9 mm in the case of isolated insufficiency, 8.2 ±2.8 mm for valves that were both stenotic and insufficient). CONCLUSIONS: Systolic aortic stretching negatively correlates with the diameter of the tubular ascending aorta and the age of the patients, and does not correlate with the diameter of the aortic root. It is lower in patients with an aortic valve pathology.

[The usage of silicone breast implants in the women bodybuilder]. / Stosowanie protez silikonowych piersi u kulturystek.

The immediate improvement of appearance is the reason for the usage of silicone breast implants also by women bodybuilders who take part in competitions. The breast implants are frequently built of an outer silicon cover filled up with half-liquid content. In Europe the implants filled up with silicone gel and saline solution are allowed. The most popular are silicone implants. They contain internal covers and silicone gel of a different consistency--from half-fluid to gelatinous. The surface of the implant may be smooth or with rough surface. The shape may be round or anatomical. Recently has appeared the new sort of anatomical prosthesis from series 510 Dual Gel. The prostheses contain of two kinds of silicone gel of a different level of cohesion. There are four points where the implant can be inserted: an umbilicus, armpits, a surface below a breast and around teat. There is no proof that prostheses increase a risk of cancer. They do not cause an impairment of immune system either. It is cosidered that even after two weeks light weights can be carried. The training of chest is not recommended in six weeks after a surgery.

[The use of a synthetic vascular artificial prosthesis or arterial homograft in cases of patients with the arteriosclerosis and terminal insufficiency of kidney cured by the kidney transplantation]. / Stosowanie syntetycznej protezy naczyniowej lub homograftu tetniczego u chorych z miazdzyca i terminalna niewydolnoscia nerek leczonych przeszczepem nerki.

Arterial transplantations were practiced in the vascular surgery since the beginning of her formation but without successes in the distant observation. Transplantation of a kidney is a routine conduct in the treatment of the decadent incapacity of a kidney. The dissertation concerns a use of arterial allografts kept using a method of a cold ischaemia in the protective liquid or synthetic vascular dacron artificial limbs or PTFE used as arterial foot-bridges at patients with the atherosclerotic obstruction aortal-pelvic, treated with the kidney transplantation. The arterial transplant is created from the aorta, arteria iliacas common and externa, femoral arteries common and superficial. A tissue material is kept using the method of the cold ischaemia and practical as the aortal foot-bridge-femoral or aortal-two-femoral at classified earlier patients being subjecteds to transfusion. The other way of a transplantation of a kidney at patients with the arteriosclerosis is the realization earlier or one-temporarily the vascular foot-bridge with use of the synthetic artificial limb. It seems that vascular artificial limbs about enlarged resistance on the contagion should be used in such a case. Sonographic examinations with duplex doppler and angiography are performed in all cases. The analysis of such cures can make a creation of the most profitable algorithm of the conduct possible in cases of patients suffering from ischaemia of lower limbs and requiring a transplantation of a kidney because of its incapacity.

[The usage of synthol in the body building]. / Stosowanie syntholu w kulturystyce.

Synthol consists usually of oil, benzyl alcohol and lidocain. It consists of 85% of oil (normally it is oil built by medium-length MTC chains because it gives the best effects), 7,5% of lidocain (painkiller), 7,5% of alcohol (to sterilize the mixture). Synthol is a substance used by body builders as a temporary implant which is injected deeply into the muscle. The enlargement effects are immediate. Synthol is used in small groups of muscles to enlarge their volume (for example triceps, biceps, deltoids, muscles of the calf). Some serious drawbacks can be visible while using synthol. The muscles deform and become unnaturally shaped. The side effects of synthol are manifold and they can also cause a damage of nerves, oil embolic of the pulmonary, occlusion of the pulmonary artery, myocardial infarction, cerebral stroke and infectious complications.

Effect of dissection on the mechanical properties of human ascending aorta and human ascending aorta aneurysm.

PURPOSE: The aim of the presented work is to determine (i) mechanical properties of the ascending aorta wall (DAA) and the wall of the ascending aortic aneurysm (DAAA), in which spontaneous dissection resulting from the evolving disease occurred, and (ii) the strength of the interface between the layers in the above-mentioned vessels. METHODS: The mechanical tests were divided into two steps. In the first step the mechanical properties of the of DAA and DAAA walls were examined on the basis of uniaxial stretching until rapture. In the next step the mechanical parameters of the interface between layers of DAA and DAAA walls were determined by the peeling test. RESULTS: Higher values of tensile strength (  max) and Young's modulus (E) were obtained for the DAAA group, to which the dissecting wall of the ascending aortic aneurysm was classified. For circumferential samples, the difference between the DAAA and DAA groups was 39% in the case of tensile strength and 70% in the case of the Young's modulus. CONCLUSIONS: Summarizing, the studies performed showed that the dissection process is different in the case of the ascending aortic aneurysm wall and the ascending aorta wall. The wall of the ascending aortic aneurysm is more susceptible to dissection, as evidenced by lower values of the mechanical parameters of the interface between the intima and the media-adventitia complex. The obtained results of mechanical properties tests confirm that dissection and aneurysm should be treated as separate disease entities that may coexist with each other.

A comparison of aortic root measurements by echocardiography and computed tomography.

OBJECTIVES: The aim of the study is to evaluate an optimal way to assess the dimensions of the aortic root and each of the sinuses of Valsalva and examine how a single measurement in 1 plane (echocardiography or 2-dimensional computed tomography) can underestimate the maximum dimension of the aortic root. METHODS: Computed tomography and transthoracic echocardiography images of the aortic root and ascending aorta of 112 patients were analyzed. The minimum and maximum aortic root dimensions, the root perimeter, and the total area of all 3 sinuses of Valsalva were measured on a plane perpendicular to the long axis of the aorta using 3-dimensional multiplanar reconstruction. Moreover, the maximum root dimension was compared with the measurements obtained from the echocardiography and 2-dimensional computed tomography angiography measurements. RESULTS: The difference in the measurements of the minimum and maximum root dimension was 5.4 ± 3.2 mm (range, 0-21 mm, P < .0001) and was significantly larger in patients with bicuspid aortic valves compared with those with tricuspid valves (6.3 ± 4 mm, range, 0-21 mm vs 4.9 ± 2.6 mm, range, 0-15 mm, P = .036). The maximum root dimension measured in 3-dimensional multiplanar reconstruction (49.1 ± 9.0 mm) differed significantly from the root dimension measured in transthoracic echocardiography in the parasternal long-axis view (44.8 ± 8.4 mm) and 2-dimensional computed tomography (axial plane: 45.5 ± 9.0 mm, coronal plane: 46.1 ± 8.8 mm, sagittal plane: 45.1 ± 8.9 mm) (P < .001). CONCLUSIONS: The difference in the measurements of the minimum and maximum aortic root dimensions is significant and may exceed 20 mm, especially in patients with bicuspid aortic valves. Therefore, aortic root dimensions can be significantly underestimated with the measurement (echocardiography, computed tomography angiography) performed in only 1 plane.

Modelling of predissection aortic size in acute descending aortic dissection.

OBJECTIVES: Large aortic diameter is considered the most frequent cause of aortic dissection. However, this assumption relies on postdissection imaging of the aorta. We recently showed that acute dissection leads to a 23% increase in the descending aortic diameter. Our aim was to model the diameter of the aorta before the acute descending aortic dissection occurred. METHODS: Between 2003 and 2017, a total of 190 patients developed acute descending aortic dissection. In total, 165 non-Marfan patients were included, whose computed tomography angiography scans were available and taken within 6 h after the occurrence of acute descending aortic dissection [67 (first quartile 58-third quartile 75) years, 69% males]. The maximum postdissection aortic diameter was measured at the level of the mid-descending aorta. Modelling was performed by dividing the postdissection aortic diameter by the factor 1.23. RESULTS: The median modelled predissection descending diameter measured in the mid-descending aorta was 30.5 (27.3-35.4) mm. The median predissection descending diameter was higher in men (P = 0.021) and associated with age (P < 0.001) but not with body surface area. The modelled diameter of the predissected descending aorta revealed that 98.8% (163/165) of patients had an aortic diameter measuring <55 mm and 84.8% (140/165) <40 mm. In other words, 50% of these patients had a non-dilated descending aorta prior to dissection onset. CONCLUSIONS: Modelling indicated that more than 80% of patients who suffered an acute descending aortic dissection had a descending aorta <40 mm before dissection onset. Only 1% of them would have met the guideline criteria (aortic diameter ≥55 mm) for elective descending aortic repair. The role of an excessively large aortic diameter as a predictor of descending aortic dissection might be overrated.

Aortic root dilation in kidney transplant recipients.

INTRODUCTION Aortic root (AoR) dilation is associated with cardiac damage and higher cardiovascular risk. Cardiovascular disease is the most common cause of death in patients after kidney transplantation (KTx ). OBJECTIVES The aim of this study was to assess the prevalence of enlarged AoR diameter in KTx recipients. Patients with bicuspid aortic valve, significant valvular disease, or evidence of connective tissue disorder were excluded. PATIENTS AND METHODS A total of 87 KTx recipients were divided into 2 groups depending on immunosuppressive regimen: 41 patients receiving mammalian target of rapamycin inhibitors (mTORi) and 46 patients treated with calcineurin inhibitors (CNIs). In all patients, echocardiography was performed, laboratory and clinical markers of cardiovascular risk were assessed, and the AoR diameter was calculated. RESULTS There were no differences between groups in age, sex, body surface area, body mass index, frequency of diabetes, hypertension, dyslipidemia, time after replacement therapy, creatinine levels, and estimated glomerular filtration rate. In the CNI group, the observed and calculated AoR diameters were similar (P = 0.8). In the mTORi group, the observed AoR diameter was higher than the calculated one (P = 0.002). The concentric and eccentric left ventricular hypertrophy was similar in both groups (P = 0.12 and P = 0.69, respectively). In the stepwise regression analysis, the AoR diameter was associated with body surface area and mTORi treatment. CONCLUSIONS KTx recipients have a high prevalence of AoR dilation. Immunosuppressive regimen based on mTORi increases the incidence of AoR enlargement.

Inaccurate aortic stent graft deployment in the distal landing zone: incidence, reasons and consequences.

OBJECTIVES: The aim of this study was to investigate the accuracy of stent graft deployment in the distal landing zone (LZ) during thoracic endovascular aortic repair (TEVAR). Currently, TEVAR focuses on accurate stent graft deployment in the proximal LZ. Data on landing in the distal LZ are lacking. METHODS: Of 195 TEVAR patients (2005-16) with a non-dissected aortic pathology, 59 [median age 73 years (first quartile 68; third quartile 77), 20 women] patients had a distal LZ shorter than 40 mm. In all, the aim was to deploy the stent graft just above the target vessel (coeliac trunk, mesenteric superior or renal artery). Patients were divided into the accurate landing (n = 10) and inaccurate landing (IAL, n = 49) groups according to the distance to the target vessel ≤ 5 mm or > 5 mm after TEVAR, target vessel coverage and the need for a second stent graft in the distal LZ. We assessed the distal LZ, stent graft distance to the target vessel, apposition, migration and endoleak Ib on computed tomography. Median follow-up period was 23 months (5; 48). RESULTS: Distal LZ anatomy did not differ between groups. Overall stent graft distance to the target vessel was 10.0 mm (6.5 mm; 16.0 mm). Three patients required a second stent graft in the distal LZ, and in 3 others, the target vessel was accidentally covered. In patients of the accurate landing group primary endoleak Ib occurred less frequently than those in the IAL group (0% vs 33%; P = 0.049). Three (30%) accurate landing and 19 (39%) IAL patients (P = 0.73) presented with substantial stent graft wedge apposition. CONCLUSIONS: Accurate stent graft implantation in the distal LZ with the currently available deployment mechanism is often challenging. An inaccurate landing is associated with a higher incidence of endoleak Ib.