Delivery of multiple siRNAs using lipid-coated PLGA nanoparticles for treatment of prostate cancer.

Nanotechnology can provide a critical advantage in developing strategies for cancer management and treatment by helping to improve the safety and efficacy of novel therapeutic delivery vehicles. This paper reports the fabrication of poly(lactic acid-co-glycolic acid)/siRNA nanoparticles coated with lipids for use as prostate cancer therapeutics made via a unique soft lithography particle molding process called Particle Replication In Nonwetting Templates (PRINT). The PRINT process enables high encapsulation efficiency of siRNA into neutral and monodisperse PLGA particles (32-46% encapsulation efficiency). Lipid-coated PLGA/siRNA PRINT particles were used to deliver therapeutic siRNA in vitro to knockdown genes relevant to prostate cancer.

Reductively responsive siRNA-conjugated hydrogel nanoparticles for gene silencing.

A critical need still remains for effective delivery of RNA interference (RNAi) therapeutics to target tissues and cells. Self-assembled lipid- and polymer-based systems have been most extensively explored for transfection with small interfering RNA (siRNA) in liver and cancer therapies. Safety and compatibility of materials implemented in delivery systems must be ensured to maximize therapeutic indices. Hydrogel nanoparticles of defined dimensions and compositions, prepared via a particle molding process that is a unique off-shoot of soft lithography known as particle replication in nonwetting templates (PRINT), were explored in these studies as delivery vectors. Initially, siRNA was encapsulated in particles through electrostatic association and physical entrapment. Dose-dependent gene silencing was elicited by PEGylated hydrogels at low siRNA doses without cytotoxicity. To prevent disassociation of cargo from particles after systemic administration or during postfabrication processing for surface functionalization, a polymerizable siRNA pro-drug conjugate with a degradable, disulfide linkage was prepared. Triggered release of siRNA from the pro-drug hydrogels was observed under a reducing environment while cargo retention and integrity were maintained under physiological conditions. Gene silencing efficiency and cytocompatibility were optimized by screening the amine content of the particles. When appropriate control siRNA cargos were loaded into hydrogels, gene knockdown was only encountered for hydrogels containing releasable, target-specific siRNAs, accompanied by minimal cell death. Further investigation into shape, size, and surface decoration of siRNA-conjugated hydrogels should enable efficacious targeted in vivo RNAi therapies.

The effect of particle design on cellular internalization pathways.

The interaction of particles with cells is known to be strongly influenced by particle size, but little is known about the interdependent role that size, shape, and surface chemistry have on cellular internalization and intracellular trafficking. We report on the internalization of specially designed, monodisperse hydrogel particles into HeLa cells as a function of size, shape, and surface charge. We employ a top-down particle fabrication technique called PRINT that is able to generate uniform populations of organic micro- and nanoparticles with complete control of size, shape, and surface chemistry. Evidence of particle internalization was obtained by using conventional biological techniques and transmission electron microscopy. These findings suggest that HeLa cells readily internalize nonspherical particles with dimensions as large as 3 mum by using several different mechanisms of endocytosis. Moreover, it was found that rod-like particles enjoy an appreciable advantage when it comes to internalization rates, reminiscent of the advantage that many rod-like bacteria have for internalization in nonphagocytic cells.

Complexity-building annulations of strained cycloalkanes and C═O π bonds.

This Perspective details a developing research program that emerged from simple plans for achieving the synthesis of tetrahydrofurans from cyclopropanes and C═O π bonds. Lewis acid catalyzed annulations of malonate-derived donor-acceptor cyclopropanes with aldehydes are unusually broad in scope and lead to the synthesis of structurally diverse tetrahydrofurans. The reactions are stereospecific, with inversion observed at the cyclopropane donor site. Substituent effects on the aldehyde suggest that it acts as a nucleophile in the reaction. An unusual mechanism emerges in which the aldehyde traps a configurationally stable intimate ion pair to stereospecifically construct the C-O bond. In addition to the stereospecific conversion of enantiomerically enriched cyclopropanes into nonracemic heterocycles, we have also demonstrated that racemic cyclopropane 1,1-diesters can undergo dynamic kinetic asymmetric annulations catalyzed by (pybox)MgI(2) complexes. Asymmetric syntheses of (+)-polyanthellin A and (+)-virgatusin have been achieved; both rely upon cyclopropane/aldehyde annulation for construction of the core tetrahydrofurans.

The pursuit of a scalable nanofabrication platform for use in material and life science applications.

In this Account, we describe the use of perfluoropolyether (PFPE)-based materials that are able to accurately mold and replicate micro- and nanosized features using traditional techniques such as embossing as well as new techniques that we developed to exploit the exceptional surface characteristics of fluorinated substrates. Because of the unique partial wetting and nonwetting characteristics of PFPEs, we were able to go beyond the usual molding and imprint lithography approaches and have created a technique called PRINT (Particle [or Pattern] Replication In Nonwetting Templates). PRINT is a distinctive "top-down" fabrication technique capable of generating isolated particles, arrays of particles, and arrays of patterned features for a plethora of applications in both nanomedicine and materials science. A particular strength of the PRINT technology is the high-resolution molding of well-defined particles with precise control over size, shape, deformability, and surface chemistry. The level of replication obtained showcases some of the unique characteristics of PFPE molding materials. In particular, these materials arise from very low surface energy precursors with positive spreading coefficients, can be photocured at ambient temperature, and are minimally adhesive, nonswelling, and conformable. These distinctive features enable the molding of materials with unique attributes and nanometer resolution that have unprecedented scientific and technological value. For example, in nanomedicine, the use of PFPE materials with the PRINT technique allows us to design particles in which we can tailor key therapeutic parameters such as bioavailability, biodistribution, target-specific cell penetration, and controlled cargo release. Similarly, in materials science, we can fabricate optical films and lens arrays, replicate complex, naturally occurring objects such as adenovirus particles, and create 2D patterned arrays of inorganic oxides.

An "anti-Baldwin" 3-exo-dig cyclization: preparation of vinylidene cyclopropanes from electron-poor alkenes.

Stabilized carbanions undergo an uncommon 3-exodig cyclization onto propargyl halides through an SN2' substitution. Propargyl iodides as electrophiles are necessary to achieve good yields (36-95%) for most substrates, although the usefulness of chlorides and bromides is documented. A variety of monocyclic and bicyclic vinylidene cyclopropanes can be prepared. These products are not available by standard carbene methodology.

Scope and mechanism for lewis acid-catalyzed cycloadditions of aldehydes and donor-acceptor cyclopropanes: evidence for a stereospecific intimate ion pair pathway.

In this work, the one-step diastereoselective synthesis of cis-2,5-disubstituted tetrahydrofurans via Lewis acid catalyzed [3 + 2] cycloadditions of donor-acceptor (D-A) cyclopropanes and aldehydes is described. The scope and limitations with respect to both reaction partners are provided. A detailed examination of the mechanism has been performed, including stereochemical analysis and electronic profiling of both reactants. Experimental evidence supports an unusual stereospecific intimate ion pair mechanism wherein the aldehyde functions as a nucleophile and malonate acts as the nucleofuge. The reaction proceeds with inversion at the cyclopropane donor site and allows absolute stereochemical information to be transferred to the products with high fidelity. The mechanism facilitates the stereospecific synthesis of a range of optically active tetrahydrofuran derivatives from enantioenriched D-A cyclopropanes.

Nanofabricated particles for engineered drug therapies: a preliminary biodistribution study of PRINT nanoparticles.

A novel method for the fabrication of polymeric particles on the order of tens of nanometers to several microns is described. This imprint lithographic technique called PRINT (Particle Replication In Non-wetting Templates), takes advantage of the unique properties of elastomeric molds comprised of a low surface energy perfluoropolyether network, allowing the production of monodisperse, shape-specific nanoparticles from an extensive array of organic precursors. This engineered nature of particle production has a number of advantages over the construction of traditional nanoparticles such as liposomes, dendrimers, and colloidal precipitates. The gentle "top down" approach of PRINT enables the simultaneous and independent control over particle size and shape, composition, and surface functionality, and permits the loading of delicate cargos such as small organic therapeutics and biological macromolecules. Thus, this single tool serves as a comprehensive platform for the rational design and investigation of new nanocarriers in medicine, having applications ranging from therapeutics to advanced diagnostics. Preliminary in vitro and in vivo studies were conducted, demonstrating the future utility of PRINT particles as delivery vectors in nanomedicine. Monodisperse 200 nm poly(ethylene glycol)-based (PEG) particles were fabricated using PRINT methodology and characterized via scanning electron microscopy and dynamic light scattering. Incubation with HeLa cells showed very little cytotoxicity, even at high concentrations. The biodistribution and pharmacokinetics of [(125)I]-labeled particles were studied in healthy mice following bolus tail vein administration. The particles were distributed mainly to the liver and the spleen with an apparent distribution t(1/2) of approximately 17 min followed by slow redistribution with a t(1/2) of 3.3 h. The volume of distribution for the central and peripheral compartments was found to be approximately 3 mL and 5 mL, respectively.

Enantiospecific Sn(II)- and Sn(IV)-catalyzed cycloadditions of aldehydes and donor-acceptor cyclopropanes.

A cycloaddition strategy for the synthesis of highly enantioenriched 2,5-cis-disubstituted tetrahydrofurans has been developed. In the presence of catalytic Sn(OTf)2 or SnCl4, a range of aldehydes will undergo formal [3 + 2] cycloadditions with a scalemic donor-acceptor cyclopropane to form optically active heterocycles. Mechanistic studies support an unusual SN2 attack by the aldehyde on the activated cyclopropane. Through this mechanism, stereochemical information contained in the cyclopropane is effectively transferred to the tetrahydrofuran products.

Highly diastereoselective synthesis of tetrahydrofurans via Lewis acid-catalyzed cyclopropane/aldehyde cycloadditions.

A one-step procedure for the preparation of 2,5-disubstituted tetrahydrofurans from donor-acceptor cyclopropanes and aldehydes has been developed. In the presence of a catalytic amount of Sn(OTf)(2), cyclopropanes bearing an aryl or conjugated donor substituent vicinal to a malonyl diester group undergo cycloadditions with diverse conjugated aldehydes furnishing tetrahydrofurans with high cis diastereoselectivity. This method is useful for the preparation of regiodefined tetrahydrofurans.

Lewis acid-promoted carbon-carbon bond cleavage of aziridines: divergent cycloaddition pathways of the derived ylides.

Lewis acids are shown to cleave the carbon-carbon bond of activated aziridines at ambient temperature. The derived metal-coordinated azomethine ylides undergo cycloaddition reactions with electron-rich alkenes. Cyclic alkenes afford products that are formally [4+2] adducts most likely derived from a Mannich-type addition to the ylide, followed by intramolecular Friedel-Crafts alkylation. Alternatively, acyclic alkenes undergo [3+2] cycloaddition to give new pyrrolidine products.