Feminization Surgery of the Upper Face as the Crucial Factor in Gender Confirmation-Pearls and Pitfalls.

Background: Upper-face feminization is a frequently executed procedure in sexual reassignment surgery, owing to its ability to influence gender identity through adjustments to the hairline, forehead, and peri-orbital area. The procedure includes reducing the hairline, lifting the brows, shaving the orbital region, and applying specific techniques to reduce the frontal bone. This research aims to assess the outcomes, results, and potential complications associated with this surgery among transgender patients. Material and Method: Retrospective review of medical records of 20 patients who attended for facial feminization surgery of the upper face between June 2022 and June 2023, analyzing the previously performed procedures, complications and revision surgery outcomes, and first-time procedures. A literature review was performed for similar studies. Results: 20 patients were included in the study. Among the cohort treated elsewhere (n = 11), the primary complaint was insufficient browbone reduction and anterior frontal sinus table setback. They underwent poorly performed Type 1 reduction when full forehead reconstruction (Type 3/4) was indicated (n = 3), or no reduction was performed during hairline advancement (n = 4). Type 3 forehead reduction with orbital shaving and hairline advancement with simultaneous temporal browlift was most commonly performed in both revision and first-time surgical upper face feminization (n = 15) (75%). Type 1 osteoplasty was performed in four patients (10%), one Type 3 revision surgery was performed after insufficient Type 3 reduction, and one case of shock-induced alopecia was reported, treated with PRP/peptides and a FUE hair graft. Conclusions: The author's preferred technique, 'whole-in-one' upper face feminization by modified bi-coronal incision with frontal trichophytic hyper-beveled incision, provides sufficient insight into the frontal bone and orbital region, the desired forehead osteoplasty and the most efficient insight into the temporal area, enabling safe dissection between fasciae, ligamentous adhesion removal, and periosteal attachment, providing full soft and hard tissue feminization. Nevertheless, feminization procedures should be meticulously planned, and all concerning issues should be addressed during the first surgery in order to prevent revisions, complications, and patient dissatisfaction.

Esthetic Surgery of the Chin in Cis- and Transgender Patients-Application of T-Genioplasty vs. Single-Piece Segment Lateralization.

Background and Objectives: Correction of lower face asymmetry still remains challenging in maxillofacial surgery. This report describes techniques for the lateral transposition of the symphyseal segment to restore lower face symmetry while maintaining gender-related features in cis- and transgender patients. Materials and Methods: A retrospective review of medical records of 31 patients who attended for esthetic corrective surgery after orthodontic camouflage or orthognathic treatment, or during facial feminization of the lower face between June 2021 and June 2023 was performed. Result: All patients underwent lateralization genioplasty (with or without advancement or setback), either with or without narrowing T-osteotomy supplemented with necessary procedures in order to obtain proper facial balance and desired esthetical effects, such as bichectomy, liposuction, and face and neck lift. The mean asymmetry of the chin was 5.15 mm and was surgically corrected either by single segment lateralization or T-shape narrowing genioplasty depending on the gender and esthetical requirements. No complications were reported. Conclusions: Lateral shift genioplasty serves as a powerful tool in primary and secondary corrective surgery for lower face asymmetry that maintains gender-specific facial features. It may serve either as an additive to orthodontic camouflage or a way to correct previous orthognathic surgery pitfalls. The surgeon performing esthetic genioplasty associated with gender-specific expectations must be trained in facelift and facial liposculpting techniques in order to provide the best results and properly choose the right procedures for the right patients.

Craniofacial and cutaneous findings in Noonan, Costello and LEOPARD syndromes.

Noonan, Costello and LEOPARD syndromes belong to a family of cardiofaciocutaneous disorders and share common genetic traits. As they are associated with a germline mutation in genes encoding proteins involved in RAS/MAPK, patients suffering from these syndromes are at a greater risk of cancer and abnormal myelopoiesis in infancy. Patients with cardio faciocutaneous syndromes share some clinically overlapping syndromes, therefore differential diagnosis can be problematic. In this paper we aim at demonstrating distinctive craniofacial and cutaneous manifestations of Noonan, Costello and LEOPARD syndromes which can be useful for clinicians who aim at treatment of children with rare diseases.

[Evaluation of biocidal properties of silver nanoparticles against cariogenic bacteria]. / Ocena bakteriobójczej aktywnosci koloidalnego roztworu nanoczastek srebra w stosunku do bakterii próchnicotwórczych.

INTRODUCTION: Antimicrobial properties of silver nanoparticles (SNP's) have been recentl well evaluated, and now are being considered as excellent candidates for therapeutic purposes. It is confirmed, that various solutions of colloidal SNP's possess significant antibacterial properties against such species as: Staphylococcus aureus, Staphylococcus epidermidis, Escherichia coli, Pseudomonas aeruginosa even at low concentrations, although there have been so far only a few researches evaluating antimicrobial activity of SNP's against cariogenic bacteria: Streptococcus mutans, Streptococcus salivarius and Streptococcus mitis responsible for initiation of dental carries. Tooth decay is infectious disease an worldwide, which may occur in patients of every age. Nanotechnology creates a new approach of designing of medical devices preventing or reducing bacterial colonization. METHODS: Colloidal silver solution (CSS) of concentration 350 ppm was used in this research. Nanoparticles size, shape and solution stability were evaluated. 16 strains of cariogenic bacteria, 4 isolates of each species: S. mutans, S. salivarius, S. sanguinis and S, mitis were obtained from plaque swabs of 7 patients treated for dental carries at Department of Conservative Dentistry, Medical University of Warsaw. MIC and MBC values for CSS's were evaluated. RESULTS: CSS used in this research is of good stability. No agglomeration or coalescence was observed during 24 hours of experiment. Silver nanoparticles were of round shape and had mean size of 67 nm. MIC values were: 12-25 ppm for S. salivarius, 25 ppm for S. sanguinis, 50-100 ppm for S. mitis and 50 ppm for S. mutans, while MBC values after 1 hour of bacterial contact with nanoparticles were 200-350 ppm for all cariogenic bacterial species. After 24 hours of contact MBC values were: 25-50 ppm for S. salivarius and S. sanguinis, 100-200 ppm for S. mitis and 200 ppmfor S. mutans. CONCLUSIONS: Antimicrobial properties of CSS depend on nanoparticles concentration and interaction time with bacteria. The susceptibility of cariogenic oral streptococci to silver nanoparticles is diversified. Sufficient concentration which inhibited all cariogenic bacteria in our research was 200 ppm after long (24 hours) period of silver nanoparticles interaction with bacteria.

Use of a Fibula Free Flap for Mandibular Reconstruction in Severe Craniofacial Microsomia in Children with Obstructive Sleep Apnea.

This is a retrospective study describing a multi-stage protocol for the management of severe mandibular hypoplasia in craniofacial microsomia (CFM) with accompanying obstructive sleep apnea (OSA). Patients with severe mandibular hypoplasia require reconstruction functionality and esthetical features. In the cohort, reconstructions based on free fibular flaps (FFF) may be the most effective way. Patients aged 4-17 years with severe mandibular hypoplasia were treated with FFF, which initially improved the respiratory function assessed on polysomnography (AHI). In the next stages of treatment of cases with respiratory deterioration, it was indicated to perform distraction osteogenesis (DO) of the mandible and the structures reconstructed with FFF. All surgeries were planned in accordance with virtual surgery planning VSP. The aim of the study was to prospectively assess the effectiveness of multi-stage mandibular reconstruction in craniofacial microsomia with the use of a free fibula flap in terms of improving respiratory failure due to obstructive sleep apnea (OSA). The FFF reconstruction method, performed with virtual surgical planning (VSP), is proving to be an effective alternative to traditional methods of mandibular reconstruction in patients with severe CFM with OSA.

State of the Art in Temporomandibular Joint Arthrocentesis-A Systematic Review.

Temporomandibular joint disorders are a heterogenic group of clinical conditions, which impair physiological functioning of the masticatory system. Arthrocentesis of the temporomandibular joint has become a widely approved method for non-invasive treatment, bridging the gap between conservative and surgical approaches. Regardless of technique, treatment is based upon joint lavage and lysis of the inflammatory fibrous tissue adhesions, which, in turn, improves joint mobility and reduces pain and closed lock. Recently, approaches for intra-articular injections have been proposed as adjuvant or replacement therapy. The aim of this study was to assess the most efficient technique of arthrocentesis. A systematic search based on PRISMA guidelines, including a computer search with specific keywords, a reference list search and a manual search, was performed. Relevant articles were selected after three search rounds for final review. The studies pulled for the analysis presented information about the relevant predictors, including the technique of arthrocentesis (single- or two-needle method), fluid used for lavage (Ringer lactate or saline), volume of the fluid, application of the injectable, number of interventions, pain (VAS) and mouth opening scores (MMO) and follow-up. All cohorts showed improvement in mouth opening, but significant pain reduction was observed only in cohorts treated either by arthrocentesis alone or arthrocentesis followed by intra-articular injectables. Intra-articular injectables used alone failed to reduce pain post-operatively when compared to other cohorts. We concluded that both double-needle and single-puncture arthrocentesis techniques are equally efficient. Application of the adjuvant injectable did not improve the outcomes of arthrocentesis performed alone. The volume of the fluid used for joint lavage and its chemical composition were not significant in clinical outcomes. However, due to the lack of homogeneity in the study settings, a meta-analysis could not be applied and a systematic review was conducted. We still, however, state that there is a knowledge gap in the current literature regarding the use of injectables alone, as well as a longitudinal follow-up, which provides information about treatment efficiency. More high-quality and randomized controlled trials are required to shed light on this subject.

Analysis of the effects of mandibular reconstruction based on microvascular free flaps after oncological resections in 21 patients, using 3D planning, surgical templates and individual implants.

INTRODUCTION: Post- resection defects in the area of the head and neck frequently result in functional impairment of the masticatory system and unaesthetic outcome in the facial appearance. In pediatric population they exert a devastating effect on speech development, breathing and facial growth leading to secondary deformations which are extremely challenging in reconstruction by means of conventional surgery protocols. MATERIAL AND METHODS: 21 patients (14 males/ 7 females) aged 4-17 years old, treated between 2015 and 2019 due to malignant/benign tumors or congenital deformities requiring mandible resection were enrolled in the study. All patients underwent Virtual Surgical Planning (VSP), mandible tumor resection with use surgery guides and defect reconstruction with microvascular bone graft supported with custom implants. Postoperatively, 3D models used for the planning and postoperative 3D model of the reconstructed mandible were compared using authors method based on easily measurable morphometric measurements (3 angles, 3 linear dimensions), allowing a three-dimensional quantitative assessment of postoperative outcomes of the surgery. Linear regression analysis and one-way analysis of variance were used to evaluate the clinical material. The difference was considered significant if p < 0.05. RESULTS: Free fibula flap (FFF) was most commonly used type of the reconstruction of the pediatric mandible. The average maximum deviation for the analyzed cases was 7.7 mm, and the average minimum deviation was -6.09 mm, however without significant differences and the postoperative position of the mandible condyle was comparable to the position designed in the 3DVSP preoperatively. Position of the whole reconstructed mandible by means of individually planned grafts and plates provided comparable position of the ramus and mandible body and no chin deviation as the differences between the pre-operative axial and sagittal angles and their post-operative equivalents were insignificant (p > 0,05). CONCLUSIONS: This study confirms applicability of the 3DVSP in pediatric craniomaxillofacial surgery. Preoperative planning of the osteotomies, grafting technique and production of the individualized guides and implants provides precise tumor resection and immediate reconstruction adjusted to the specific anatomy of the pediatric patients.

Dental Implant Healing Screws as Temporary Oral Drug Delivery Systems for Decrease of Infections in the Area of the Head and Neck.

Background: Periimplantitis is continuously one of major threats for the uneventful functioning of dental implants. Current approaches of drug delivery systems are being more commonly implemented into oral- and maxillofacial biomaterials in order to decrease the risk of implant failure due to bacterial infection. Silver nanoparticles and their compounds have been proven in eradicating oral bacteria responsible for peri-implant infections. Nevertheless, their evaluation as coating for implant abutments has not been extensively evaluated so far. This article describes a novel coating consisting of zinc oxide (ZnO) and silver (Ag) nanoparticles (NPs). This coating was used to modify healing abutments that could be used as drug delivery systems in oral implantology. Materials and Method: Nanoparticles with a ZnO + 0.1% Ag composition were produced by microwave solvothermal synthesis and then incorporated into the surface of titanium healing abutments by high-power ultrasonic deposition. Surface morphology, roughness, wettability were evaluated. Ability of biofilm formation inhibition was tested against S. mutans, S. oralis, S. aureus and E. coli. Results: ZnO+0.1%Ag NPs were sufficiently deposed on the surface of the abutments creating nanostructured coating which increased surface roughness and decreased wettability. Modified abutments significantly decreased bacterial biofilm formation. Bacteria present in SEM studies were unlikely to settle and replicate on the experimental abutments as their cells were rounded, insufficiently spread on the surface and covered with released NPs. Conclusion: Experimental nanostructured abutments were easily manufactured by high-power ultrasonic deposition and provided significant antibacterial properties. Such biomaterials could be used as temporary drug delivery abutments for prevention and treatment of intra- and extraoral peri-implant infections in the area of the head and neck.

Protocol for Multi-Stage Treatment of Temporomandibular Joint Ankylosis in Children and Adolescents.

Treatment of temporomandibular ankylosis is challenging and frequently leads to re-ankylosis, relapse, dangerous complications and, in turn, the need for multiple operations. In this article, we present a protocol for the treatment of ankylosis of the temporomandibular joints that assumes earlier intervention with the assistance of 3D virtual surgical planning (3DVSP) and custom biomaterials for better and safer surgical outcomes. Thirty-three patients were treated due to either uni- or bilateral temporomandibular ankylosis. Twenty individuals received temporomandibular prosthesis, whereas seventeen required simultaneous 3D virtual surgical/planned orthognathic surgery as the final correction of the malocclusion. All patients exhibited statistically significant improvements in mouth opening (from 1.21 ± 0.74 cm to 3.77 ± 0.46 cm) and increased physiological functioning of the mandible. Gap arthroplasty and aggressive rehabilitation prior to temporomandibular prosthesis (TMJP) placement were preferred over costochondral autografts. The use of 3DVSP and custom biomaterials enables more precise, efficient and safe procedures to be performed in the paediatric and adolescent population requiring treatment for temporomandibular ankylosis.

Protocol and Evaluation of 3D-Planned Microsurgical and Dental Implant Reconstruction of Maxillary Cleft Critical Size Defects in Adolescents and Young Adults.

Functional and esthetic final reconstruction of the cleft maxilla is still challenging. Current reconstructive and augmentation techniques do not provide sufficient bone and soft tissue support for the predictable rehabilitation with dental implants due to presence of maxillary bone critical size defects and soft tissue deficiency, scaring and poor vascularity. In this article the protocol for the use of 3D virtual surgical planning and microvascular tissue transfers for the reconstruction and rehabilitation of cleft maxilla is presented. Twenty-five patients (8 male/17 female) aged 14-41 years old with cleft-associated critical size defects were treated by 3D-virtual planned microvascular tissue transfers taken either from fibula, iliac crest, radial forearm, or medial femoral condyle. Follow-up lasted 1-5 years. No significant bone resorption (p > 0.005) nor volume loss of the graft was observed (p = 0.645). Patients received final permanent prosthetic reconstruction of the anterior maxilla based on 2-5 dental implants, depending on the defect severity. This is the first study presenting the use of virtual planning in the final restoration of the cleft maxilla with microvascular tissue transfers and dental implants. Presented protocol provide highly functional and aesthetic results.

Nanoparticles And Human Saliva: A Step Towards Drug Delivery Systems For Dental And Craniofacial Biomaterials.

AIM: The aims of this study were to investigate new nano-formulations based on ZnO and Ag nanoparticle (NP) compounds when used against clinical strains of oral gram-positive and gram-negative bacteria, and to examine the stability and behaviour of nano-formulation mixtures in saliva based on different compositions of Ag NPs, ZnO NPs and ZnO+x·Ag NPs. Methods: ZnO NPs with and without nanosilver were obtained by microwave solvothermal synthesis. Then, antibacterial activity was evaluated against bacteria isolated from human saliva. Behavior and nanoparticle solutions were evaluated in human saliva and control (artificial saliva and deionized water). Results were statistically compared. RESULTS: The NP mixtures had an average size of 30±3 nm, while the commercial Ag NPs had an average size of 55±5 nm. The suspensions displayed differing antibacterial activities and kinetics of destabilisation processes, depending on NPs composition and fluid types. CONCLUSION: The present study showed that all NPs suspensions displayed significant destabilisation and high destabilisation over the 24 h of the analyses. The agglomeration processes of NPs in human saliva can be reversible.

The paradigm shift for drug delivery systems for oral and maxillofacial implants.

Along with the development of nanotechnological strategies for biomaterials associated with the prevention of infections, a myriad of clinically unproven techniques have been described to date. In this work, the aim was to perform a critical analysis of the literature available concerning antibacterial biomaterials for oral implantology and to provide a practical derivation for such a purpose. As anti-adhesive strategies may affect osseointegration, they should no longer be recommended for inclusion in this class of biomaterials, despite promising results in biomedical engineering for other, non-bone load bearing organs. Targeted, antibacterial drug delivery is most likely desirable in the case of intraosseous implants. Interfering factors such as the oral cavity environment, saliva, the bacterial microbiome, as well as, the characteristics of the alveolar mucosa and peri-implant space must be taken into account when calculating the local pharmacokinetics for antibacterial coatings. Effective release is crucial for tailoring antibacterial implant longevity providing minimal inhibitory concentration (MIC) for the desired amount of time, which for oral implants, should be at least the cumulative time for the osseointegration period and functional loading period within the tissues. These parameters may differ between the implant type and its anatomical site. Also, the functional drug concentration in the peri-implant space should be calculated as the amount of the drug released from the implant surface including the concentration of the drug inactivated by biological fluids of the peri-implant space or saliva flow throughout the effective release time.

Nanomaterials in dentistry: a cornerstone or a black box?

AIM: The studies on tooth structure provided basis for nanotechnology-based dental treatment approaches known as nanodentistry which aims at detection and treatment of oral pathologies, such as dental caries and periodontal diseases, insufficiently being treated by conventional materials or drugs. This review aims at defining the role of nanodentistry in the medical area, its potential and hazards. MATERIALS & METHODS: To validate these issues, current literature on nanomaterials for dental applications was critically reviewed. RESULTS: Nanomaterials for teeth restoration, bone regeneration and oral implantology exhibit better mechanical properties and provide more efficient esthetic outcome. However, still little is known about influence of long-term function of such biomaterials in the living organism. CONCLUSION: As application of nanomaterials in industry and medical-related sciences is still expanding, more information is needed on how such nano-dental materials may interfere with oral cavity, GI tract and general health.

Oral microbiome and peri-implant diseases: where are we now?

Peri-implant infective diseases (PIIDs) in oral implantology are commonly known as peri-implant mucositis (PIM) and periimplantitis (PI). While PIM is restricted to the peri-implant mucosa and is reversible, PI also affects implant-supporting bone and, therefore, is very difficult to eradicate. PIIDs in clinical outcome may resemble gingivitis and periodontitis, as they share similar risk factors. However, recent study in the field of proteomics and other molecular studies indicate that PIIDs exhibit significant differences when compared to periodontal diseases. This review aims to elucidate the current knowledge of PIIDs, their etiopathology and diversified microbiology as well as the role of molecular studies, which may be a key to personalized diagnostic and treatment protocols of peri-implant infections in the near future.

In vitro studies of nanosilver-doped titanium implants for oral and maxillofacial surgery.

The addition of an antibacterial agent to dental implants may provide the opportunity to decrease the percentage of implant failures due to peri-implantitis. For this purpose, in this study, the potential efficacy of nanosilver-doped titanium biomaterials was determined. Titanium disks were incorporated with silver nanoparticles over different time periods by Tollens reaction, which is considered to be an eco-friendly, cheap, and easy-to-perform method. The surface roughness, wettability, and silver release profile of each disc were measured. In addition, the antibacterial activity was also evaluated by using disk diffusion tests for bacteria frequently isolated from the peri-implant biofilm: Streptococcus mutans, Streptococcus mitis, Streptococcus oralis, Streptococcus sanguis, Porphyromonas gingivalis, Staphylococcus aureus, and Escherichia coli. Cytotoxicity was evaluated in vitro in a natural human osteoblasts cell culture. The addition of nanosilver significantly increased the surface roughness and decreased the wettability in a dose-dependent manner. These surfaces were significantly toxic to all the tested bacteria following a 48-hour exposure, regardless of silver doping duration. A concentration of 0.05 ppm was sufficient to inhibit Gram-positive and Gram-negative species, with the latter being significantly more susceptible to silver ions. However, after the exposure of human osteoblasts to 0.1 ppm of silver ions, a significant decrease in cell viability was observed by using ToxiLight™ BioAssay Kit after 72 hours. Data from the present study indicated that the incorporation of nanosilver may influence the surface properties that are important in the implant healing process. The presence of nanosilver on the titanium provides an antibacterial activity related to the bacteria involved in peri-implantitis. Finally, the potential toxicological considerations of nanosilver should further be investigated, as both the antibacterial and cytotoxic properties may be observed at similar concentration ranges.