Silicon(IV) Corroles.

Silicon complexes of corrole were obtained for the first time by reaction of the free-base corrole with hexachlorodisilane. The peripheral substituents of corrole strongly influence the nature of the reaction products: ß-octaalkyl corrole was mainly isolated as the µ-oxo dimer, while a hydroxo complex was obtained in the case of 5,10,15-tris-(pentafluorophenyl)corrole. In the case of meso-tritolyl corrole, a mixture of monomer/µ-oxo dimer was obtained. The silicon corrole complexes are more stable toward hydrolysis than the corresponding porphyrin derivatives and are endowed with brilliant luminescence properties. The high affinity of silicon for fluoride ion allowed investigation of the ability of an Si corrole to serve as a sensor for F- detection. The strong color variation due to the interaction with the halide ion makes the Si corrole an interesting material for the naked-eye detection of inorganic fluoride.

Corroles at the Real Solid-Liquid Interface: In Situ STM Investigation of a Water-Soluble Corrole Layer Deposited onto Au(111).

Corrole derivatives have been recently employed in many applications at the solid-liquid interface. Therefore, the structural arrangement of the molecular layers in direct contact with the liquid is of fundamental interest. We investigated in solution the deposition of molecular layers of the previously prepared water-soluble phosphorus complex of a 2-sulfonato-10-(4-sulfonatophenyl)-5,15-dimesitylcorrole [see synthesis in our previous paper, M. Naitana et al., Chem. Eur. J. 2017, 23, 905-916]. The layer formation of P corroles onto the Au(111) surface was monitored by STM in situ, that is, with the substrate immersed in the solution. Marked differences in the morphology between the organic layer formed on the substrate and that deposited after solvent evaporation (drop casting) are reported. In particular, the coating of gold was more effective and stable in the presence of liquid. Preservation of functionality of the corrole molecules after adsorption was verified. This result validates the relevance of corrole layers at the solid-liquid interface to exploit the peculiar properties of these molecules in real-world applications.

Introducing Cobalt(II) Porphyrin/Cobalt(III) Corrole Containing Transducers for Improved Potential Reproducibility and Performance of All-Solid-State Ion-Selective Electrodes.

A novel solid contact type for all-solid-state ion-selective electrodes is introduced, yielding high stability and reproducibility of potential readings between sensors as well as improved analytical performance. The transducer phase herein proposed takes advantage of the presence of porphyrinoids containing the same metal ion at different oxidation states. In contrast to the traditional approach, the compounds of choice are not a redox pair; although they have different oxidation states, they cannot be electrochemically driven one to another. The compounds of choice were cobalt(II) porphyrin and cobalt(III) corrole-both characterized by a high stability of the coordinated metal ions in their respective redox states and electrical neutrality, as well as relatively high lipophilicity. The porphyrinoids were used together with carbon nanotubes to yield transducer layers for ion-selective electrodes. As a result, we obtained a high stability of potential readings of the resulting ion-selective electrodes together with good reproducibility between different sensor batches. Moreover, advantageously the presence of porphyrinoids in the transducer phase results in improvement of the analytical performance of the sensors: linear response range and selectivity due to interactions with membrane components, resulting in tailoring of ion fluxes through the membrane phase. Thus, carbon nanotubes with the cobalt(II) porphyrin/cobalt(III) corrole system are promising alternatives for existing transducer systems for potentiometric sensors.

A Highly Emissive Water-Soluble Phosphorus Corrole.

The synthesis, spectroscopic, and optical properties of the water-soluble phosphorus complex of a 2-sulfonato-10-(4-sulfonatophenyl)-5,15-dimesitylcorrole have been investigated. The compound was prepared by adopting a novel strategy for the corrole sulfonation, leading to the regioselective isomer in an almost quantitative yield. The phosphorus coordination has a key role in determining the corrole substitution pattern, limiting the formation of poly-substituted species, which affected the reaction of the corrole free base. The resulting complex shows excellent optical properties in terms of emission quantum yield, also in polar protic solvents, including water. 31 P NMR spectroscopy in CD3 OD indicates that the P sulfonate complex has been isolated in a hexacoordinated geometry with two different ligands (L1=-OH, L2=-OCH3 ), and it is prone to axial ligand exchange with methanol, with no evidence of intermediate pentacoordinated species. The morphological characterization of thin layers of the P corrole deposited onto an Au(111) surface showed that the addition of an intermediate layer of reduced graphene oxide allows for a better control of corrole aggregation, inducing also transformation of the Au(111) reconstructed surface.

5,10,15-Triferrocenylcorrole Complexes.

Complexes of 5,10,15-triferrocenylcorrole were synthesized from the crude free-base corrole product obtained by the reaction of ferrocenyl aldehyde and pyrrole. Direct formation of the complex in this manner leads to an increase of the reaction yield by protecting the corrole ring toward oxidative decomposition. The procedure was successful and gave the expected product in the case of the copper and triphenylphosphinecobalt complexes, but an unexpected result was obtained in the case of the nickel derivative, where metal insertion led to a ring opening of the macrocycle at the 5 position, giving as a final product a linear tetrapyrrole nickel complex bearing two ferrocenyl groups. The purified 5,10,15-triferrocenylcorrole complexes have been fully characterized by a combination of spectroscopic methods, electrochemistry, spectroelectrochemistry, and density functional theory calculations. Copper derivatives of 10-monoferrocenyl- and 5,15-diferrocenylcorrole were prepared to investigate how the number and position of the ferrocenyl groups influenced the spectroscopic and electrochemical properties of the resulting complexes. A complete assignment of resonances in the (1)H and (13)C NMR spectra was performed for the cobalt and nickel complexes, and detailed electrochemical characterization was carried out to provide additional insight into the degree of communication between the meso-ferrocenyl groups on the conjugated macrocycle and the central metal ion of the ferrocenylcorrole derivatives.

Combining porphyrins and pH indicators for analyte detection.

High sensitivity and cross-selectivity are mandatory properties for sensor arrays. Although metalloporphyrins and pH indicators are among the most common and appropriate choices for the preparation of optical sensor arrays, the sensitivity spectrum of these dyes is limited to those analytes able to induce an optical response. To extend the receptive field of optical sensors, we explore the design of composite materials, where the molecular interaction among the subunits enriches their sensing working mechanisms. We demonstrate that blends of single metalloporphyrins and pH indicators, tested with a transduction apparatus based on ubiquitous and easily available hardware, can be endowed with sensing properties wider than those of single constituents, enabling the recognition of a broad range of volatiles.

Corroles-porphyrins: a teamwork for gas sensor arrays.

Porphyrins provide an excellent material for chemical sensors, and they have been used for sensing species both in air and solution. In the gas phase, the broad selectivity of porphyrins is largely dependant on molecular features, such as the metal ion complexed at the core of the aromatic ring and the peripheral substituents. Although these features have been largely exploited to design gas sensor arrays, so far, little attention has been devoted to modify the sensing properties of these macrocycles by variation of the molecular aromatic ring. In this paper, the gas sensing properties of a porphyrin analog, the corrole, are studied in comparison with those of the parent porphyrin. Results show that changes in the aromatic ring have important consequences on the sensitivity and selectivity of the sensors and that porphyrins and corroles can positively cooperate to enhance the performance of sensor arrays.

Phenyl derivative of iron 5,10,15-tritolylcorrole.

The phenyl-iron complex of 5,10,15-tritolylcorrole was prepared by reaction of the starting chloro-iron complex with phenylmagnesium bromide in dichloromethane. The organometallic complex was fully characterized by a combination of spectroscopic methods, X-ray crystallography, and density functional theory (DFT) calculations. All of these techniques support the description of the electronic structure of this phenyl-iron derivative as a low-spin iron(IV) coordinated to a closed-shell corrolate trianion and to a phenyl monoanion. Complete assignments of the (1)H and (13)C NMR spectra of the phenyl-iron derivative and the starting chloro-iron complex were performed on the basis of the NMR spectra of the regioselectively ß-substituted bromo derivatives and the DFT calculations.

New example of hemiporphycene formation from the corrole ring expansion.

The reaction of 5,10,15-tris(4-tert-butylphenyl)corrole with 2,3-bis(bromomethyl)-5,6-dicyanopyrazine provides a new example of corrole ring expansion to a hemiporphycene derivative. The ring expansion is regioselective, with insertion of the pyrazine derivative at the 5-position of the corrole ring, affording the corresponding 5-hemiporphycene. Different macrocyclic products accompany formation of the 5-hemiporphycene, depending on the reaction experimental conditions. Br-substitued 5-hemiporphycenes and the 2-Br substituted corrole were obtained in 1,2,4-trichlorobenzene, while in refluxing toluene traces of an inner core substituted corrole were observed together with a significant amount of the unreacted corrole. These results provide an important indication of the reaction pathway. The coordination behavior of the 5-hemiporphycene, together with detailed electrochemical characterization of the free-base and some metal complexes, provides evidence for the reactivity of the peripheral pyrazino group.

Interaction of tricationic corroles with single/double helix of homopolymeric nucleic acids and DNA.

In this manuscript a multitechnique approach is proposed to characterize the interaction between new tri-N-methylpyridyl corrole (TMPC) and its germanium(IV) derivative (GeTMPC), with single- and double-stranded nucleic acid homopolymers and calf thymus DNA. The specificity of each spectroscopic technique has been exploited to analyze the different aspects of corrole binding. Noteworthy, this approach allows us to distinguish between H aggregation of TMPC in the presence of polyriboadenilic acid (poly(rA)) and J aggregates in the presence of polyribocytidinic acid (poly(rC)) as well as to identify the formation of GeTMPC dimers in the presence of single-stranded poly(rA) and pseudointercalation with single-stranded poly(rC).

Aluminum, gallium, germanium, copper, and phosphorus complexes of meso-triaryltetrabenzocorrole.

5,10,15-Triaryltetrabenzocorrole complexes of aluminum, gallium, germanium, and phosphorus were synthesized by coordination of these metal ions in the preformed triaryltetrabenzocorrole macrocycle, opening a way to the investigation of different metal complexes. The UV-vis spectra of these derivatives exhibit a red shift and broadening of all absorption bands because of the π-extended aromatic system and distortion of the molecular framework. The electrochemical and photophysical behaviors of the free base and the metal complexes of meso-triaryltetrabenzocorrole were investigated and characterized.

Synthesis and characterization of functionalized meso-triaryltetrabenzocorroles.

5,10,15-Triaryltetrabenzocorroles functionalized with different electron-withdrawing groups on the ß,ß'-fused rings have been prepared by a cross-coupling Heck procedure between octabrominated copper corrole and a terminal alkene bearing electron-withdrawing moieties. The spectroscopic characterization of these complexes showed red-shifted UV-vis absorption bands characterized by a significant band broadening. The same feature was observed in the case of NMR spectra, where low-resolution groups of signals were observed. This behavior derives from a strong tendency of these macrocycles to aggregate in solution, as has been demonstrated by an (1)H NMR study performed on one of these tetrabenzocorroles. The influence of the substituents on the fused benzene ring on the properties of the tetrabenzocorroles was investigated by electrochemistry and spectroelectrochemistry, and comparisons were made between properties of the newly synthesized compounds and those of the tetrabenzocorroles reported earlier in the literature.

Surface functionalization of extracellular vesicle nanoparticles with antibodies: a first study on the protein corona "variable".

To be profitably exploited in medicine, nanosized systems must be endowed with biocompatibility, targeting capability, the ability to evade the immune system, and resistance to clearance. Currently, biogenic nanoparticles, such as extracellular vesicles (EVs), are intensively investigated as the platform that naturally recapitulates these highly needed characteristics. EV native targeting properties and pharmacokinetics can be further augmented by decorating the EV surface with specific target ligands as antibodies. However, to date, studies dealing with the functionalization of the EV surface with proteins have never considered the protein corona "variable", namely the fact that extrinsic proteins may spontaneously adsorb on the EV surface, contributing to determine the surface, and in turn the biological identity of the EV. In this work, we explore and compare the two edge cases of EVs modified with the antibody Cetuximab (CTX) by chemisorption of CTX (through covalent binding via biorthogonal click-chemistry) and by formation of a physisorbed CTX corona. The results indicate that (i) no differences exist between the two formulations in terms of binding affinity imparted by molecular recognition of CTX versus its natural binding partner (epidermal growth factor receptor, EGFR), but (ii) significant differences emerge at the cellular level, where CTX-EVs prepared by click chemistry display superior binding and uptake toward target cells, very likely due to the higher robustness of the CTX anchorage.

ß-Nitro-5,10,15-tritolylcorroles.

Functionalization of the ß-pyrrolic positions of the corrole macrocycle with -NO(2) groups is limited at present to metallocorrolates due to the instability exhibited by corrole free bases under oxidizing conditions. A careful choice of the oxidant can limit the transformation of corroles into decomposition products or isocorrole species, preserving the corrole aromaticity, and thus allowing the insertion of nitro groups onto the corrole framework. Here we report results obtained by reacting 5,10,15-tritolylcorrole (TTCorrH(3)) with the AgNO(2)/NaNO(2) system, to give mono- and dinitrocorrole derivatives when stoichiometry is carefully controlled. Reactions were found to be regioselective, affording the 3-NO(2)TTCorrH(3) and 3,17-(NO(2))(2)TTCorrH(3) isomers as the main products in the case of mono- and disubstitution, in 53 and 20% yields, respectively. In both cases, traces of other mono- and disubstituted isomers were detected, which were structurally characterized by X-ray crystallography. The influence of the ß-nitro substituents on the corrole properties is studied in detail by UV-visible, electrochemical, and spectroelectrochemical characterization of these functionalized corroles. Density functional theory (DFT) and time-dependent DFT (TDDFT) calculations of the ground and excited state properties of these ß-nitrocorrole derivatives also afforded significant information, closely matching the experimental observations. It is found that the ß-NO(2) substituents conjugate with the π-aromatic system of the macrocycle, which initiates significant changes in both the spectroscopic and redox properties of the so functionalized corroles. This effect is more pronounced when the nitro group is introduced at the 2-position, because in this case the conjugation is, for steric reasons, more efficient than in the 3-nitro isomer.

ß-Nitro derivatives of iron corrolates.

Two different methods for the regioselective nitration of different meso-triarylcorroles leading to the corresponding ß-substituted nitrocorrole iron complexes have been developed. A two-step procedure affords three Fe(III) nitrosyl products-the unsubstituted corrole, the 3-nitrocorrole, and the 3,17-dinitrocorrole. In contrast, a one-pot synthetic approach drives the reaction almost exclusively to formation of the iron nitrosyl 3,17-dinitrocorrole. Electron-releasing substituents on the meso-aryl groups of the triarylcorroles induce higher yields and longer reaction times than what is observed for the synthesis of similar triarylcorroles with electron-withdrawing functionalities, and these results can be confidently attributed to the facile formation and stabilization of an intermediate iron corrole π-cation radical. Electron-withdrawing substituents on the meso-aryl groups of triarylcorrole also seem to labilize the axial nitrosyl group which, in the case of the pentafluorophenylcorrole derivative, results in the direct formation of a disubstituted iron µ-oxo dimer complex. The influence of meso-aryl substituents on the progress and products of the nitration reaction was investigated. In addition, to elucidate the most important factors which influence the redox reactivity of these different iron nitrosyl complexes, selected compounds were examined by cyclic voltammetry and thin-layer UV-visible or FTIR spectroelectrochemistry in CH(2)Cl(2).

Synthetic routes to 5,10,15-triaryl-tetrabenzocorroles.

Two different synthetic routes for the preparation of 5,10,15-triaryl-tetrabenzocorroles have been developed. The first approach is based on the condensation of a tetrahydroisoindole with aryl-aldehydes, and the second pathway involves a cross-coupling reaction between a bromo-substituted corrole and a suitable substrate to form the four ß-fused aryl rings. These routes are successful to lead to the target tetrabenzocorroles, obtained in both cases as the corresponding Cu complex and with the highest yield obtained via the one-step cross-coupling methodology. Demetalation of the Cu-tetrabenzocorrole produces the corresponding free base; this macrocycle was further exploited to obtain the Sn and Co complexes in good yields.

MCD and MCPL Characterization of Luminescent Si(IV) and P(V) Tritolylcorroles: The Role of Coordination Number.

Two triarylcorrole complexes, (hydroxy)[5,10,15-tritolylcorrolato]silicon-(TTC)Si(OH) and (dihydroxy)[5,10,15-tritolylcorrolato]phosphorous-(TTC)P(OH) 2 , have been investigated by magnetic circular dichroism (MCD) and magnetic circularly polarized luminescence (MCPL). The spectroscopic investigations have been combined with explicit calculation of MCD response through time-dependent density functional theory (TD-DFT) formalism. This has allowed us to better define the role of molecular orbitals in the transitions associated with the Soret and Q bands. Besides and more importantly, MCD has made it possible to follow the titration process of (TTC)Si(OH) in dimethyl sulfoxide (DMSO) solution with NaF and of (TTC)P(OH) 2 in dichloromethane solution with alcohols in a complementary and, we dare say, more sensitive way with respect to absorption and fluorescence data. Finally, the MCPL spectra and the ancillary TD-DFT calculations have allowed us to characterize the excited state of (TTC)Si(OH).

Recent Advances in Chemical Sensors Using Porphyrin-Carbon Nanostructure Hybrid Materials.

Porphyrins and carbon nanomaterials are among the most widely investigated and applied compounds, both offering multiple options to modulate their optical, electronic and magnetic properties by easy and well-established synthetic manipulations. Individually, they play a leading role in the development of efficient and robust chemical sensors, where they detect a plethora of analytes of practical relevance. But even more interesting, the merging of the peculiar features of these single components into hybrid nanostructures results in novel materials with amplified sensing properties exploitable in different application fields, covering the areas of health, food, environment and so on. In this contribution, we focused on recent examples reported in literature illustrating the integration of different carbon materials (i.e., graphene, nanotubes and carbon dots) and (metallo)porphyrins in heterostructures exploited in chemical sensors operating in liquid as well as gaseous phase, with particular focus on research performed in the last four years.

Synthesis and characterization of free-base, copper, and nickel isocorroles.

A series of free-base and metalated isocorroles represented as (TT-n-iso-Cor)H(2) and (TT-n-iso-Cor)M(II), where n = 5 or 10 and M = Ni or Cu, were synthesized and characterized by electrochemistry and spectroelectrochemistry in CH(2)Cl(2) containing 0.1 M tetra-n-butylammonium perchlorate. The metalation of the free-base macrocycles with Co(II), Mn(III), or Zn(II) was also attempted but was unsuccessful. Six isocorroles were isolated and shown to undergo two stepwise oxidations to give pi-cation radicals and dications in CH(2)Cl(2), with the most stable products being obtained in the case of the 10-substituted derivatives. The same isocorroles could also be reduced by one or two electrons, but the initial one-electron addition products are unstable and undergo a rapid chemical reaction giving a reduced corrole or corrole-like product, which could be reoxidized to the corresponding (TTCor)M at a controlled positive potential. This series of reactions effectively illustrates an isocorrole to corrole conversion upon reduction and reoxidation and was monitored by both electrochemistry and thin-layer spectroelectrochemistry.

6-Azahemiporphycene: a new member of the porphyrinoid family.

The reaction of 5,10,15-triarylcorrole with 4-amino-4H-1,2,4-triazole provides another example of corrole ring expansion to give the corresponding 6-azahemiporphycene, a novel porphyrin analogue. The facile oxidation of the corrole ring is a required step for the ring expansion and for this reason the reaction fails in the case of corroles bearing meso-phenyl groups carrying electron-withdrawing substituents. Steric requirements also limited the scope of the reaction, which is not successful in the case of 2,6-disubstituted meso-aryl corroles. The occurrence of an initial oxidation is further supported by formation of the 6-azahemiporphycene derivative when the reaction is carried out under the same conditions, using a 5- or a 10-isocorrole as starting material. (1)H NMR spectra and X-ray crystal characterization of 6-azahemiporphycene evidenced the presence of an intramolecular N-H...N hydrogen bond in the inner core of the macrocycle, while photophysical characterization confirmed the aromatic character of the novel macrocycle, showing an intense Soret-like band around 410 nm in the absorption spectrum. The fluorescence emission is very modest, and 6-azahemiporphycene showed higher photostability than the corresponding corrole species. Different metal complexes of 6-azahemiporphycene were prepared following synthetic protocols usually exploited for the preparation of metalloporphyrins, demonstrating good coordination properties for the macrocycle. Both the free-base and metal derivatives were characterized by cyclic voltammetry and spectroelectrochemistry in dichloromethane and benzonitrile. To further detail the behavior of this novel macrocycle, density functional theory (DFT) calculations were carried out on the basic structure of 6-azahemiporphycene with the aim of assessing aromaticity and tautomerism, as well as calculating its stability with respect to the 5-aza isomer.