RESUMEN
In this work, we explore III-V based metal-semiconductor-metal structures for tunable metasurfaces. We use an epitaxial transfer technique to transfer a III-V thin film directly on metallic surfaces, realizing III-V metal-semiconductor-metal (MSM) structures without heavily doped semiconductors as substitutes for metal layers. The device platform consists of gold metal layers with a p-i-n GaAs junction. The target resonance wavelength can be tuned by modifying the geometry of the top metal grating on the GaAs, while systematic resonance tunability has been shown through the modulation of various carrier concentration injections in the mid-IR range. Electrically tunable metasurfaces with multilevel biasing can serve as a fundamental building block for electrically tunable metasurfaces. We believe that our demonstration can contribute to understanding the optical tuning of III-V under various biased conditions, inducing changes in metasurfaces.
RESUMEN
Black phosphorus (BP) has been established as a promising material for room temperature midwave infrared (MWIR) photodetectors. However, many of its attractive optoelectronic properties are often observable only at smaller film thicknesses, which inhibits photodetector absorption and performance. In this work, we show that metasurface gratings increase the absorption of BP-MoS2 heterojunction photodiodes over a broad range of wavelengths in the MWIR. We designed, fabricated, and characterized metasurface gratings that increase absorption at selected wavelengths or broad spectral ranges. We evaluated the broadband metasurfaces by measuring the room temperature responsivity and specific detectivity of BP-MoS2 photodiodes at multiple MWIR wavelengths. Our results show that broadband metasurface gratings are a scalable approach for boosting the performance of BP photodiodes over large spectral ranges.
RESUMEN
The ability to manipulate thermal emission is paramount to the advancement of a wide variety of fields such as thermal management, sensing and thermophotovoltaics. In this work, we propose a microphotonic lens for achieving temperature-switchable self-focused thermal emission. By utilizing the coupling between isotropic localized resonators and the phase change properties of VO2, we design a lens that selectively emits focused radiation at a wavelength of 4â µm when operated above the phase transition temperature of VO2. Through direct calculation of thermal emission, we show that our lens produces a clear focal spot at the designed focal length above the phase transition of VO2 while emitting a maximum relative focal plane intensity that is 330 times lower below it. Such microphotonic devices capable of producing temperature-dependent focused thermal emission could benefit several applications such as thermal management and thermophotovoltaics while paving the way for next-generation contact-free sensing and on-chip infrared communication.
RESUMEN
We propose electrically reconfigurable absorbers with switchable narrowband resonances in the infrared. Our absorbers consist of two coupled, identical resonators and support a dark supermode. We show that by dynamically breaking the symmetry of the system, the dark supermode can be made to couple to an incoming plane wave, producing a narrowband absorption peak in the spectrum. We use this effect to design and optimize absorbers consisting of coupled metal-insulator-metal resonators based on gallium arsenide. We show that the switching functionality of the designed device is robust to fabrication imperfections, and that it additionally serves as a spectrally tunable absorber. Our results suggest exciting possibilities for designing next-generation reconfigurable absorbers that could benefit several applications, such as energy harvesting and sensing.
RESUMEN
Black phosphorus (BP) has emerged as a promising materials system for mid-wave infrared photodetection because of its moderate bandgap, high carrier mobility, substrate compatibility, and bandgap tunability. However, its uniquely tunable bandgap can only be taken advantage of with thin layer thicknesses, which ultimately limits the optical absorption of a BP photodetector. This work demonstrates an absorption-boosting resonant metal-insulator-metal (MIM) metasurface grating integrated with a thin-film BP photodetector. We designed and fabricated different MIM gratings and characterized their spectral properties. Then, we show that an MIM structure increased room temperature responsivity from 12 to 77 mA W-1 at 3.37 µm when integrated with a thin-film BP photodetector. Our results show that MIM structures simultaneously increase mid-wave infrared absorption and responsivity in a thin-film BP photodetector.
RESUMEN
The ability to design multi-resonant thermal emitters is essential to the advancement of a wide variety of applications, including thermal management and sensing. These fields would greatly benefit from the development of more efficient tools for predicting the spectral response of coupled, multi-resonator systems. In this work, we propose a semi-analytical prediction tool based on coupled-mode theory. In our approach, a complex thermal emitter is fully described by a set of coupled-mode parameters, which can be straightforwardly calculated from simulations of unit cells containing single and double resonators. We demonstrate the accuracy of our method by predicting and optimizing spectral response in a coupled, multi-resonant system based on hBN ribbons. The approach described here can greatly reduce the computational overhead associated with spectral design tasks in coupled, multi-resonant systems.
RESUMEN
This paper presents and demonstrates the three logic processing levels based on complementary photonic crystal logic devices through photonic integrated circuit modeling. We accomplished a set of logic circuits including AND, OR, NAND, NOR, XOR, FAN-OUT, HALF ADDER, and FULL ADDER based on photonic crystal slab platforms. Furthermore, we achieved efficient all-optical logic circuits with contrast ratios as high as 5.5 dB, demonstrated in our simulation results, guaranteeing well-defined output power values for logic representations; a clock-rate up to 2 GHz; and an operating wavelength at λ ≈ 1550 nm. Thus, we can now switch up for high computing abstraction levels to build photonic integrated circuits rather than isolated gates or devices.
RESUMEN
We study the absorptivity of coupled metamaterial resonators in the mid-infrared range. We consider resonators supporting either a bright mode or a dark mode, introducing an additional degree of freedom for spectral modulation relative to bright modes alone. In a dark-bright coupled resonator system, we demonstrate tunable spectral splitting by changing the separation between resonators. We show via coupled mode theory that resonator separation can be mapped to coupling constant. We further introduce a dark-dark coupled resonator system, which gives rise to an emissive bright mode only in the presence of inter-resonator coupling. The dark-dark system yields a broadband emissivity that decays to zero exponentially with resonator separation, providing a design method for strong thermal emissivity control.
RESUMEN
We propose gold-vanadium dioxide microstructures for which the difference in thermally radiated power between the low and high temperature states can be tuned via structural design. We start by incorporating VO2 in a gold-dielectric-gold waveguide to achieve a temperature-dependent mode effective index. We show that a cavity formed in this waveguide structure has a fundamental resonance wavelength that shifts with temperature. We calculate the thermal radiated power from the cavity at temperatures above and below the phase transition of VO2 for wavelengths between 8 and 14 µm. We show that the difference in radiated power can be made positive, negative, or zero simply by adjusting the cavity length. Finally, we use our cavity to design thermally emissive metasurfaces with spatial emission patterns that can be inverted with temperature. Our emitters could serve as building blocks in the realization of metasurfaces enabling complex thermal radiation control.
RESUMEN
We propose a gold nanostructured design for absorption enhancement in thin black phosphorus films in the 3-5 µm wavelength range. By suitably tuning the design parameters of a metal-insulator-metal (MIM) structure, lateral resonance modes can be excited in the black phosphorus layer. We compare the absorption enhancement due to the resonant light trapping effect to the conventional 4n2 limit. For a layer thickness of 5 nm, we achieve an enhancement factor of 561 at a wavelength of 4 µm. This is significantly greater than the conventional limit of 34. The ability to achieve strong absorption enhancement in ultrathin dielectric layers, coupled with the unique optoelectronic properties of black phosphorus, makes our absorber design a promising candidate for mid-IR photodetector applications.
RESUMEN
We propose a strategy to design infrared emitters with predefined spectral response using aluminum gratings as building blocks. We begin by identifying 3 target spectra with resonances in the 7-15â µm wavelength range. Next, we use FDTD simulations and interpolation to create a reference library of gratings relating their structural parameters to attributes of their infrared spectra. By using a search algorithm based on minimization of errors in spectral attributes, we identify gratings from this library corresponding to peaks in the target spectra. Finally, we discuss an approach for designing hybrid structures from these gratings to generate each of the 3 target spectra. This strategy can be extended to design structures with complex spectral responses.
RESUMEN
Recent research has studied the feasibility of using laser radiation pressure to propel lightweight spacecraft, such as sails, at relativistic speeds. One major challenge is the effect of laser beam distortion on sail stability. We propose and investigate the use of lightsails based on Kerr nonlinear photonic crystals as a passive method for increasing sail stability. The key concept is to flatten the dependence of reflected intensity on incident intensity at the laser wavelength, using a specially designed, guided-resonance mode of the nonlinear photonic crystal. We use coupled-mode theory to analyze the resonance characteristics that yield the flattest curve. We then design a silicon nitride photonic crystal that supports a resonance with the desired properties. We show that our design simultaneously provides both high stability and high thrust on the sail, unlike designs based on linear materials.
RESUMEN
We theoretically propose and demonstrate through numerous simulations complementary photonic crystal integrated logic (CPCL) devices. Simulation results provide demonstration of a highly efficient clock rate, higher than 20 GHz, guaranteeing operation at both input and output with the same wavelength (around λ=1550nm). The proposed devices show well-defined output power values representing the two logic states 1 and 0, with a contrast ratio as high as 6 dB. The results presented here provide countless possibilities for future research, targeting the development of photonic crystal logic and communications systems with CPCLs acting as the core hardware devices.
RESUMEN
We present a photonic-crystal design which supports multiple guided-resonance modes in a narrow spectral range. Introduction of mutually-orthogonal slots within a conventional lattice allows us to create polarization-sensitive guided modes with distinct near-field periodicities and tunable resonance wavelengths. The device can potentially be used as a reconfigurable optical trap, multiband tunable filter, or differential sensor.
RESUMEN
Recent work has proposed an approach to design materials that regulate their own temperature. The concept is based on a temperature-dependent thermal emitter that has minimal emissivity below a target temperature, and maximal emissivity above it. Here we propose a microparticle approach suitable for scaling to large areas. We use electromagnetic and thermal simulations to show that the designed particles provide a 13x reduction in temperature variation relative to an uncoated aluminum substrate.
RESUMEN
We report the use of aluminum patterning to make highly selective UV bandpass filters. We design and fabricate a periodic array of nanoholes in Al thin film on a bare silicon substrate as an analog for potential integration with a Si photodetector. Arrays were designed to operate in the wavelength range of 200-400 nm. Our results show that we can obtain a single dominant peak filter with a linewidth of 30 nm at normal incidence, in contrast to similar structures on glass substrates, where multiple modes influence the UV spectrum. Varying the angle of incidence is shown to split the plasmonic mode and further decrease the linewidth of the maximum wavelength mode down to 10 nm. Our results therefore show high potential for applications in solid-state image sensors for astronomy and planetary studies.
RESUMEN
We harness residual thermal effects in a low-absorptivity system to manipulate parallel optical trapping of particles on the nanoscale. A photonic crystal is used to generate a 2D array of optical traps. We show that the size selectivity of the trap can be tuned by adding a non-ionic surfactant to the solution, altering the thermophoretic effect that delivers nanoparticles to trapping sites. We further show that particles can be permanently immobilized on the photonic crystal via photopolymerization of the trapping medium.
RESUMEN
We study the use of nanopatterned silicon membranes to obtain optically-induced heating in water. We show that by varying the detuning between an absorptive optical resonance of the patterned membrane and an illumination laser, both the magnitude and response time of the temperature rise can be controlled. This allows for either sequential or selective heating of different patterned areas on chip. We obtain a steady-state temperature of approximately 100 °C for a 805.5nm CW laser power density of 66 µW/µm2 and observe microbubble formation. The ability to spatially and temporally control temperature on the microscale should enable the study of heat-induced effects in a variety of chemical and biological lab-on-chip applications.
RESUMEN
Nanoparticles in aqueous solution are subject to collisions with solvent molecules, resulting in random, Brownian motion. By breaking the spatiotemporal symmetry of the system, the motion can be rectified. In nature, Brownian ratchets leverage thermal fluctuations to provide directional motion of proteins and enzymes. In man-made systems, Brownian ratchets have been used for nanoparticle sorting and manipulation. Implementations based on optical traps provide a high degree of tunability along with precise spatiotemporal control. Here, we demonstrate an optical Brownian ratchet based on the near-field traps of an asymmetrically patterned photonic crystal. The system yields over 25 times greater trap stiffness than conventional optical tweezers. Our technique opens up new possibilities for particle manipulation in a microfluidic, lab-on-chip environment.
RESUMEN
Applicability of optical trapping tools for nanomanipulation is limited by the available laser power and trap efficiency. We utilized the strong confinement of light in a slot-graphite photonic crystal to develop high-efficiency parallel trapping over a large area. The stiffness is 35 times higher than our previously demonstrated on-chip, near field traps. We demonstrate the ability to trap both dielectric and metallic particles of sub-micron size. We find that the growth kinetics of nanoparticle arrays on the slot-graphite template depends on particle size. This difference is exploited to selectively trap one type of particle out of a binary colloidal mixture, creating an efficient optical sieve. This technique has rich potential for analysis, diagnostics, and enrichment and sorting of microscopic entities.