Phenolic profiles and their responses to pre- and post-harvest factors in small fruits: a review.

The consumption of small fruits has increased in recent years. Besides their appealing flavor, the commercial success of small fruits has been partially attributed to their high contents of phenolic compounds with multiple health benefits. The phenolic profiles and contents in small fruits vary based on the genetic background, climate, growing conditions, and post-harvest handling techniques. In this review, we critically compare the profiles and contents of phenolics such as anthocyanins, flavonols, flavan-3-ols, and phenolic acids that have been reported in bilberries, blackberries, blueberries, cranberries, black and red currants, raspberries, and strawberries during fruit development and post-harvest storage. This review offers researchers and breeders a general guideline for the improvement of phenolic composition in small fruits while considering the critical factors that affect berry phenolics from cultivation to harvest and to final consumption.

Emerging Protein Sources for Food Production and Human Nutrition.

It is estimated that by 2050, the world's population will be up to 9 billion [...].

Optimized Green Extraction of Polyphenols from Cassia javanica L. Petals for Their Application in Sunflower Oil: Anticancer and Antioxidant Properties.

The total phenolic content (TPC) from Cassia javanica L. petals were extracted using ethanolic solvent extraction at concentrations ranging from 0 to 90% and an SCF-CO2 co-solvent at various pressures. Ultrasound-assisted extraction parameters were optimized using response surface methodology (RSM). Antioxidant and anticancer properties of total phenols were assessed. An SCF-CO2 co-solvent extract was nano-encapsulated and applied to sunflower oil without the addition of an antioxidant. The results indicated that the best treatment for retaining TPC and total flavonoids content (TFC) was SCF-CO2 co-solvent followed by the ultrasound and ethanolic extraction procedures. Additionally, the best antioxidant activity by ß-carotene/linoleic acid and DPPH free radical-scavenging test systems was observed by SCF-CO2 co-solvent then ultrasound and ethanolic extraction methods. SCF-CO2 co-solvent recorded the highest inhibition % for PC3 (76.20%) and MCF7 (98.70%) and the lowest IC50 value for PC3 (145 µ/mL) and MCF7 (96 µ/mL). It was discovered that fortifying sunflower oil with SCF-CO2 co-solvent nanoparticles had a beneficial effect on free fatty acids and peroxide levels. The SCF-CO2 method was finally found to be superior and could be used in large-scale processing.

A Rapid Gas-Chromatography/Mass-Spectrometry Technique for Determining Odour Activity Values of Volatile Compounds in Plant Proteins: Soy, and Allergen-Free Pea and Brown Rice Protein.

Plant-based protein sources have a characteristic aroma that limits their usage in various meat-alternative formulations. Despite being the most popular plant-based protein, the allergenicity of soy protein severely restricts the potential adoption of soy protein as an animal substitute. Thereby, allergen-free plant-protein sources need to be characterized. Herein, we demonstrate a rapid solid-phase-microextraction gas-chromatography/mass-spectrometry (SPME-GC/MS) technique for comparing the volatile aroma profile concentration of two different allergen-free plant-protein sources (brown rice and pea) and comparing them with soy protein. The extraction procedure consisted of making a 1:7 w/v aqueous plant protein slurry, and then absorbing the volatile compounds on an SPME fibre under agitation for 10 min at 40 °C, which was subsequently injected onto a GC column coupled to an MS system. Observed volatile concentrations were used in conjunction with odour threshold values to generate a Total Volatile Aroma Score for each protein sample. A total of 76 volatile compounds were identified. Aldehydes and furans were determined to be the most dominant volatiles present in the plant proteins. Both brown rice protein and pea protein contained 64% aldehydes and 18% furans, with minor contents of alcohols, ketones and other compounds. On the other hand, soy protein consisted of fewer aldehydes (46%), but a more significant proportion of furans (42%). However, in terms of total concentration, brown rice protein contained the highest intensity and number of volatile compounds. Based on the calculated odour activity values of the detected compounds, our study concludes that pea proteins could be used as a suitable alternative to soy proteins in applications for allergen-free vegan protein products without interfering with the taste or flavour of the product.

In Vitro Antimicrobial, Antioxidant and Anticancer Activities of Egyptian Citrus Beebread.

In this study, Egyptian beebread (EBB) was investigated for its nutritive value, chemical composition, antioxidant properties, antimicrobial and antitumor activities. Results indicated that EBB was a good source of protein (23.58 ± 0.183 g/100 g BB), total free sugar (20.266 ± 0.930) and potassium (290.202 ± 2.645 mg/100 g). Additionally, 14 fatty acids were identified in EBB, wherein polyunsaturated and monounsaturated fatty acids represented 51.06% ± 0.09% and 9.86% ± 0.01%, respectively. The EBB extract exhibited almost 400% better antiradical activity than BHT, with IC50 of EBB extract being 10.7 µg/mL compared to 39.5 µg/mL for BHT. EBB exhibited higher inhibitory activity than the reference compound against Staphylococcus aureus and Escherichia coli, followed by Bacillus subtilis. No inhibitory activity was observed against Aspergillus Niger. Additionally, the highest inhibitory activity was recorded against Caco-2 cells, followed by PC3 and HepG-2 cancer cell lines with IC50 values 262, 314 and 386 µg/mL, respectively. These findings establish the potential of EBB as an antioxidant, antimicrobial and antitumor agent, with possible applications as natural food supplements and natural preservatives.

Whey Proteins as a Potential Co-Surfactant with Aesculus hippocastanum L. as a Stabilizer in Nanoemulsions Derived from Hempseed Oil.

The use of natural surfactants including plant extracts, plant hydrocolloids and proteins in nanoemulsion systems has received commercial interest due to demonstrated safety of use and potential health benefits of plant products. In this study, a whey protein isolate (WPI) from a byproduct of cheese production was used to stabilize a nanoemulsion formulation that contained hempseed oil and the Aesculus hippocastanum L. extract (AHE). A Box-Behnken experimental design was used to set the formulation criteria and the optimal nanoemulsion conditions, used subsequently in follow-up experiments that measured specifically emulsion droplet size distribution, stability tests and visual quality. Regression analysis showed that the concentration of HSO and the interaction between HSO and the WPI were the most significant factors affecting the emulsion polydispersity index and droplet size (nm) (p < 0.05). Rheological tests, Fourier transform infrared spectroscopy (FTIR) analysis and L*a*b* color parameters were also taken to characterize the physicochemical properties of the emulsions. Emulsion systems with a higher concentration of the AHE had a potential metabolic activity up to 84% in a microbiological assay. It can be concluded from our results that the nanoemulsion system described herein is a safe and stable formulation with potential biological activity and health benefits that complement its use in the food industry.

Multidisciplinary Studies of Folk Medicine "Five Thieves' Oil" (Olejek Pieciu Zlodziei) Components.

To meet the growing interest in natural antibacterial agents, we evaluated the physicochemical and biological properties of the folk medicine known as "five thieves' oil" (Polish name: olejek pieciu zlodziei). Five thieves' oil consists of a mixture of five oils: rosemary, lemon, clove, eucalyptus, and cinnamon. In this study, we performed gas chromatography, FTIR, and UV-vis spectroscopic analysis, as well as L-a-b color tests, contact angle determination, and surface tension determination. To verify its antibacterial activity, the metabolic activity and changes in cell membrane permeability of bacteria of the genus Pseudomonas were studied. As a result, it was found that among the constituent oils, the oils of clove and cinnamon were the least volatile and, at the same time, had the strongest antibacterial activity. However, a mix of all the oils also showed comparable activity, which was even more pronounced for the oils after 4 weeks of aging. This effect can be linked to the high content of terpene derivatives such as eugenol and cinnamaldehyde, which can cause changes in bacterial membrane permeability, affecting cell activity and survival. This study is the first to characterize the constituents of the popular folk medicine five thieves' oil, confirming and explaining its strong antibacterial activity, thus constituting a significant contribution to contemporary health education.

Vacuum microwave dehydration decreases volatile concentration and soluble protein content of pea (Pisum sativum L.) protein.

BACKGROUND: Peas are an inexpensive yet nutritious and sustainable source of protein. However, it is challenging to incorporate pea proteins into food formulations owing to their beany or green off-flavours and their limited water solubility. RESULTS: Vacuum microwave dehydration (VMD) of pea protein with an initial moisture content of 425% (dry basis, db) at 2 W g-1 specific microwave energy and 200 Torr vacuum level for 88 min led to an 83% reduction in total volatile compound concentration. VMD processing at high initial moisture contents facilitated the Maillard reaction, enhancing the extent of protein cross-linking, leading to a marked decrease in soluble protein content, to 11 g kg-1 . Reducing the initial moisture content to 56% db greatly retained protein solubility (112-113 g kg-1 ), but it only led to a minor reduction in total volatile compound concentration (2-11% reduction). A high microwave energy (20 W g-1 )-short time (2 min) treatment at 200 Torr vacuum level was found optimal, reducing both volatile levels and soluble protein content by ~50%. CONCLUSION: Evidently, it is difficult to employ VMD without reduction of pea protein solubility and corresponding changing in functionality. Yet, if optimized, VMD has the capability to decrease volatile concentrations while retaining protein solubility. Future sensory analysis should be conducted to determine whether the aforementioned reductions in total volatile compound concentration may have a notable effect on consumer palatability. © 2020 Society of Chemical Industry.

Effect of nonthermal treatments on selected natural food pigments and color changes in plant material.

In recent years, traditional high-temperature food processing is continuously being replaced by nonthermal processes. Nonthermal processes have a positive effect on food quality, including color and maintaining natural food pigments. Thus, this article describes the influence of nonthermal, new, and traditional treatments on natural food pigments and color changes in plant materials. Characteristics of natural pigments, such as anthocyanins, betalains, carotenoids, chlorophylls, and so forth available in the plant tissue, are shortly presented. Also, the characteristics and mechanism of nonthermal processes such as pulsed electric field, ultrasound, high hydrostatic pressure, pulsed light, cold plasma, supercritical fluid extraction, and lactic acid fermentation are described. Furthermore, the disadvantages of these processes are mentioned. Each treatment is evaluated in terms of its effects on all types of natural food pigments, and the possible applications are discussed. Analysis of the latest literature showed that the use of nonthermal technologies resulted in better preservation of pigments contained in the plant tissue and improved yield of extraction. However, it is important to select the appropriate processing parameters and to optimize this process in relation to a specific type of raw material.

Lysine Bioavailability in School-Age Children Consuming Rice Is Reduced by Starch Retrogradation.

BACKGROUND: Rice is one of the most commonly consumed cereal grains and is part of staple diets in the majority of the world. However, it is regarded as an incomplete protein, with lysine being a limiting amino acid. OBJECTIVES: Our objectives were to determine the bioavailability of lysine in school-age children consuming cooked white rice and to assess the effect of rice starch retrogradation. METHODS: Bioavailability or metabolic availability (MA) of lysine was determined using the indicator amino acid oxidation (IAAO) method in a repeated-measures design. Six healthy school-age children (3 boys, 3 girls) with a mean ± SD age of 6.8 ± 0.98 y randomly received 4 crystalline l-lysine intakes (2, 6, 10, 14 mg · kg-1 · d-1), and 5 rice intakes to provide lysine at 8, 11, or 14 mg · kg-1 · d-1. The 14 mg · kg-1 · d-1 intakes were measured twice as warm rice and once as cold rice (to assess the impact of starch retrogradation on MA). Diets provided protein at 1.5 g · kg-1 · d-1 and calories at 1.7 times the participant's measured resting energy requirement, and were isonitrogenous. Breath samples were collected at baseline and during an isotopic steady state for 13C enrichment measurement. The MA of lysine from rice was determined by comparing the IAAO response of rice with l-lysine using the slope-ratio and single intake methods. Starch retrogradation was characterized using differential scanning calorimetry. RESULTS: MA of lysine in warm rice measured in school-age children was 97.5% and was similar to a repeated rice study (97.1%) within the same study population. MA of lysine was reduced significantly (P < 0.05) to 86.1% when the cooked rice was consumed cold, which corresponded to detectable starch retrogradation. CONCLUSIONS: To our knowledge, this is the first study to measure the MA of lysine from rice in school-age children. Although the bioavailability of lysine from rice is high, it can be reduced by retrogradation of its starch component.This trial was registered at clinicaltrials.gov as NCT04135040.

Plant Extracts Containing Saponins Affects the Stability and Biological Activity of Hempseed Oil Emulsion System.

In this study, two saponins-rich plant extracts, viz. Saponaria officinalis and Quillaja saponaria, were used as surfactants in an oil-in-water (O/W) emulsion based on hempseed oil (HSO). This study focused on a low oil phase content of 2% v/v HSO to investigate stable emulsion systems under minimum oil phase conditions. Emulsion stability was characterized by the emulsification index (EI), centrifugation tests, droplet size distribution as well as microscopic imaging. The smallest droplets recorded by dynamic light scattering (droplets size v. number), one day after the preparation of the emulsion, were around 50-120 nm depending the on use of Saponaria and Quillaja as a surfactant and corresponding to critical micelle concentration (CMC) in the range 0-2 g/L. The surface and interfacial tension of the emulsion components were studied as well. The effect of emulsions on environmental bacteria strains was also investigated. It was observed that emulsions with Saponaria officinalis extract exhibited slight toxic activity (the cell metabolic activity reduced to 80%), in contrast to Quillaja emulsion, which induced Pseudomonas fluorescens ATCC 17400 growth. The highest-stability samples were those with doubled CMC concentration. The presented results demonstrate a possible use of oil emulsions based on plant extract rich in saponins for the food industry, biomedical and cosmetics applications, and nanoemulsion preparations.

Pea Protein for Hempseed Oil Nanoemulsion Stabilization.

In this paper, we present the possibility of using pea protein isolates as a stabilizer for hempseed oil (HSO)-based water/oil emulsions in conjunction with lecithin as a co-surfactant. A Box-Behnken design was employed to build polynomial models for optimization of the ultrasonication process to prepare the emulsions. The stability of the system was verified by droplet size measurements using dynamic light scattering (DLS) as well as centrifugation and thermal challenge tests. The z-ave droplet diameters of optimized emulsion were 209 and 207 nm after preparation and 1 week storage, respectively. The concentration of free Linoleic acid (C18:2; n-6) was used for calculation of entrapment efficiency in prepared nanoemulsions. At optimum conditions of the process, up to 98.63% ± 1.95 of entrapment was achieved. FTIR analysis and rheological tests were also performed to evaluate the quality of oil and emulsion, and to verify the close-to-water like behavior of the prepared samples compared to the viscous nature of the original oil. Obtained results confirmed the high impact of lecithin and pea protein concentrations on the emulsion droplet size and homogeneity confirmed by microscopic imaging. The presented results are the first steps towards using hempseed oil-based emulsions as a potential food additive carrier, such as flavor. Furthermore, the good stability of the prepared nanoemulsion gives opportunities for potential use in biomedical and cosmetic applications.

Effect of reciprocating agitation thermal processing (RA-TP) on quality of canned tomato (Solanum lycopersicum) puree.

BACKGROUND: Reciprocating agitation thermal processing (RA-TP) is a recent innovation in the field of canning for obtaining high-quality canned food. The objective of this study was to compare RA-TP processing with conventional non-agitated (still) processing with respect to the impact on quality (color, antioxidant capacity, total phenols, carotenoid and lycopene contents) of canned tomato (Solanum lycopersicum) puree. RESULTS: Owing to a 63-81% reduction in process times as compared with still processing, tomato puree with a brighter red color (closer to fresh) was obtained during RA-TP. At 3 Hz reciprocation frequency, the loss of antioxidant, lycopene and carotenoid contents could be reduced to 34, 8 and 8% respectively as compared with 96, 41 and 52% respectively during still processing. In fact, the phenolic content for RA-TP at 3 Hz was 5% higher than in fresh puree. Quality retention generally increased with an increase in frequency, although the differences were less significant at higher reciprocation frequencies (between 2 and 3 Hz). CONCLUSION: Research findings indicate that RA-TP can be effective to obtain thermally processed foods with high-quality attribute retention. It can also be concluded that a very high reciprocation frequency (>3 Hz) is not necessarily needed and significant quality improvement can be obtained at lower frequencies (∼2 Hz). © 2016 Society of Chemical Industry.

Nasal delivery of encapsulated recombinant ACE2 as a prophylactic drug for SARS-CoV-2.

Angiotensin-converting enzyme 2 (ACE2) is responsible for cell fusion with SARS-CoV viruses. ACE2 is contained in different areas of the human body, including the nasal cavity, which is considered the main entrance for different types of airborne viruses. We took advantage of the roles of ACE2 and the nasal cavity in SARS-CoV-2 replication and transmission to develop a nasal dry powder. Recombinant ACE2 (rhACE2), after a proper encapsulation achieved via spray freeze drying, shows a binding efficiency with spike proteins of SARS-CoV-2 higher than 77 % at quantities lower than 5 µg/ml. Once delivered to the nose, encapsulated rhACE2 led to viability and permeability of RPMI 2650 cells of at least 90.20 ± 0.67 % and 47.96 ± 4.46 %, respectively, for concentrations lower than 1 mg/ml. These results were validated using nasal dry powder containing rhACE2 to prevent or treat infections derived from SARS-CoV-2.

Antimicrobial topical polymeric films loaded with Acetyl-11-keto-ß-boswellic acid (AKBA), boswellic acid and silver nanoparticles: Optimization, characterization, and biological activity.

The study examined the antimicrobial and antioxidant potential of pure Acetyl-11-keto-ß-boswellic acid (AKBA), boswellic acid (70%) and AKBA loaded nanoparticles as topical polymeric films. The optimized concentration (0.05 % w/v) of pure AKBA, boswellic acid (BA), and AKBA loaded silver nanoparticles were used to study its impact on film characteristics. Carboxymethyl cellulose (CMC), sodium alginate (SA), and gelatin (Ge) composite films were prepared in this study. The polymeric films were evaluated for their biological (antioxidant and antimicrobial activities) and mechanical characteristics such as tensile strength (TS) and elongation (%). Moreover, other parameters including water barrier properties and color attributes of the film were also evaluated. Furthermore, assessments were conducted using analytical techniques like FTIR, XRD, and SEM. Surface analysis revealed that AgNP precipitation led to a few particles in the film structure. Overall, the results indicate a relatively consistent microstructure. Moreover, due to the addition of AKBA, BA, and AgNPs, a significant decrease in TS, moisture content, water solubility, and water vapor permeation was observed. The films transparency also showed a decreasing trend, and the color analysis revealed decreasing yellowness (b*) of the films. Importantly, a significant increase in antioxidant activity against DPPH free radicals and ABTS cations was observed in the CSG films. Additionally, the AgNP-AKBA loaded films displayed significant antifungal activity against C. albicans. Moreover, the molecular docking analysis revealed the inter-molecular interactions between the AKBA, AgNPs, and composite films. The docking results indicate good binding of AKBA and silver nanoparticles with gelatin and carboxymethyl cellulosemolecules. In conclusion, these polymeric films have potential as novel materials with significant antioxidant and antifungal activities.

Characterization of selected dietary fibers microparticles and application of the optimized formulation as a fat replacer in hazelnut spreads.

The present work demonstrates the application of the spray drying technique to produce microparticulates of different dietary fibers with particle sizes<10 µm. It examines their role as potential fat replacers for hazelnut spread creams. Optimization of a dietary fiber formulation containing inulin, glucomannan, psyllium husk, and chia mucilage to obtain high viscosity, water holding capacity, and oil holding capacity was conducted. Microparticles containing 46.1, 46.2, and 7.6 weight percentages of chia seed mucilage, konjac glucomannan, and psyllium husk showed a spraying yield of 83.45 %, a solubility of 84.63 %, and viscosity of 40.49 Pas. When applied to hazelnut spread creams, microparticles substituted palm oil by 100 %; they produced a product with a total unsaturated and saturated fat reduction of 41 and 77 %, respectively. An increase in dietary fibers of 4 % and a decrease in total calories of 80 % were also induced when compared with the original formulation. Hazelnut spread with dietary fiber microparticles were preferred by 73.13 % of the panelist in the sensory study due to an enhancement in brightness. The demonstrated technique could be used to increase the fiber content while decreasing the fat content in some commercial products, such as peanut butter or chocolate cream.

Effect of pulsed light on curcumin chemical stability and antioxidant capacity.

Curcumin is the major bioactive component in turmeric with potent antioxidant activity. Little is known about how pulsed light (PL) technology (an emerging non-thermal food processing technology relying on high intensity short duration flashes of light) can affect the chemical stability and antioxidant capacity of curcumin. This study found that PL treatment of fluence levels from 0 to 12.75 J/cm2 produced a fluence-dependent reduction in curcumin content. These results paralleled the production of a tentative curcumin dimer, identified as a potential photochemical transformation product. PL-treated curcumin at relatively higher fluence levels decreased chemical-based ORAC and ABTS antioxidant capacity, relative to control (P < 0.05). This contrasted the effect observed to increase coincidently both intracellular antioxidant capacity (e.g., DCFH-DA (P < 0.05)) and GSH/GSSG ratio (P < 0.05), respectively, in cultured differentiated Caco-2 cells. In conclusion, the application of PL on curcumin results in photochemical transformation reactions, such as dimerization, which in turn, can enhance biological antioxidant capacity in differentiated Caco-2 cells.

Mercaptonicotinic acid activated thiolated chitosan (MNA-TG-chitosan) to enable peptide oral delivery by opening cell tight junctions and enhancing transepithelial transport.

Recent advances in peptide delivery and nanotechnology has resulted in emergence of several non-parenteral administration routes that replace subcutaneous injections associated with patient discomfort. Thiolated biopolymers are relatively new materials being explored to enhance mucoadhesivity and permeability in these efforts, yet their pH dependent reactivity remains an obstacle. This work focussed on improving the mucoadhesivity of thiolated chitosans by activating them with mercaptonicotinic acid, in a bid to create a novel thiomerized chitosan that can open cell tight junctions for application in oral delivery. The synthesized mercaptonicotinic acid activated thiolated chistoan (MNA-TG-chitosan), along with thiolated chitosan (TG-chitosan) and unmodified chitosan were then used to create insulin nanoparticles (insNPs) using spray drying encapsulation process. Use of MNA-TG-chitosan in place of chitosan resulted in reduction of particle size of insNPs from 318 to 277 nm with no significant changes in polydispersity index (~ 0.2), encapsulation efficiency (~ 99%), insulin loading content (~ 25%) and morphology. Results from in-vitro cytotoxicity on TR146, CaCo2 and HepG2 cell lines revealed no significant effects on cell viability at 50-1000 µg/mL concentration. insNPs encapsulated with the new material, MNA-TG-chitosan, resulted in a 1.5-fold and 4.4-fold higher cellular uptake by HepG2 liver cells where insulin is metabolized, approximately 40% and 600% greater insulin transport through TR146 buccal cell monolayers, and 40% and 150% greater apparent permeability than insNPs encapsulated with unmodified chitosan and TG-chitosan respectively. The higher permeation achieved on using MNA-TG chitosan was attributed to the greater opening of the cell tight junction evidenced by reduction of transepithelial electrical resistance of TR146 buccal cell monolayers. This study demonstrates MNA-TG-chitosan as a promising material for improved peptide oral delivery.

Concept for a Unidirectional Release Mucoadhesive Buccal Tablet for Oral Delivery of Antidiabetic Peptide Drugs Such as Insulin, Glucagon-like Peptide 1 (GLP-1), and their Analogs.

Injectable peptides such as insulin, glucagon-like peptide 1 (GLP-1), and their agonists are being increasingly used for the treatment of diabetes. Currently, the most common route of administration is injection, which is linked to patient discomfort as well as being subjected to refrigerated storage and the requirement for efficient supply chain logistics. Buccal and sublingual routes are recognized as valid alternatives due to their high accessibility and easy administration. However, there can be several challenges, such as peptide selection, drug encapsulation, and delivery system design, which are linked to the enhancement of drug efficacy and efficiency. By using hydrophobic polymers that do not dissolve in saliva, and by using neutral or positively charged nanoparticles that show better adhesion to the negative charges generated by the sialic acid in the mucus, researchers have attempted to improve drug efficiency and efficacy in buccal delivery. Furthermore, unidirectional films and tablets seem to show the highest bioavailability as compared to sprays and other buccal delivery vehicles. This advantageous attribute can be attributed to their capability to mitigate the impact of saliva and inadvertent gastrointestinal enzymatic digestion, thereby minimizing drug loss. This is especially pertinent as these formulations ensure a more directed drug delivery trajectory, leading to heightened therapeutic outcomes. This communication describes the current state of the art with respect to the creation of nanoparticles containing peptides such as insulin, glucagon-like peptide 1 (GLP-1), and their agonists, and theorizes the production of mucoadhesive unidirectional release buccal tablets or films. Such an approach is more patient-friendly and can improve the lives of millions of diabetics around the world; in addition, these shelf-stable formulations ena a more environmentally friendly and sustainable supply chain network.

Spray-dried microparticles of encapsulated gefitinib for slow-release localized treatment of periodontal disease.

Periodontal disease (PD) can be prevented by local or systemic application of epidermal growth factor receptor inhibitors (EGFRIs) that stabilize αvß6 integrin levels in the periodontal tissue, leading to an increase in the expression of anti-inflammatory cytokines, such as transforming growth factor-ß1. Systemic EGFRIs have side effects and, therefore, local treatment of PD applied into the periodontal pockets would be preferrable. Thus, we have developed slow-release three-layered microparticles of gefitinib, a commercially available EGFRI. A combination of different polymers [cellulose acetate butyrate (CAB), Poly (D, L-lactide-co-glycolide) (PLGA) and ethyl cellulose (EC)] and sugars [D-mannose, D-mannitol and D-(+)-trehalose dihydrate] were used for the encapsulation. The optimal formulation was composed of CAB, EC, PLGA, mannose and gefitinib (0.59, 0.24, 0.09, 1, and 0.005 mg/ml, respectively; labeled CEP-gef), and created microparticles of 5.7 ± 2.3 µm in diameter, encapsulation efficiency of 99.98%, and a release rate of more than 300 h. A suspension of this microparticle formulation blocked EGFR phosphorylation and restored αvß6 integrin levels in oral epithelial cells, while the respective control microparticles showed no effect.