RESUMEN
A series of experiments was designed to assess the relative efficacy of various dust suppressants to suppress PM10 emissions from nepheline syenite tailings. The experiments were conducted in the Trent University Environmental Wind Tunnel, Peterborough, Ontario, and on the tailings ponds at a mine near Havelock, Ontario. Treated surfaces were subjected to particle-free airflow, abrasion with blown sand particles, and particle-free airflow after physical disturbance. Emission rates in the wind tunnel tests were calculated from dust concentration measurements obtained in vertical profile with DustTrak™ II aerosol monitors (model 8530); rates in the field were measured using a Portable In-Situ Wind Erosion Laboratory (PI-SWERL). In the particle-free wind tunnel tests, three of the surface treatments performed well, and PM10 emission scaled inversely with crust strength. Light bombardment of each surface by saltating sand grains increased PM10 emission rates by two orders of magnitude. All treated surfaces emitted significantly more PM10 after physical disturbance. In the field study, plots treated with a commercial dust suppressant were found to release more PM10 than either the control or irrigated plots, although it should be noted that the emission rates were similar in magnitude. As in the wind tunnel experiments, all of the field plots became significantly more emissive after physical disturbance. The field results suggest that the site conditions, inclusive of the potential for dust advection and resuspension, must be taken into account when considering the use of a commercial dust suppressant. Implications: Fugitive dust (PM10) emissions from mining and industrial operations worldwide present significant environmental and human health risks, leaving mine operators challenged to find reliable, durable, and cost-effective mitigation options. Commercial dust suppressants boast unique chemical compositions and commensurate particle binding capabilities, although few side-by-side comparisons exist in the literature. The efficacy of four commercial products to suppress PM10 emissions from mine tailings, before and after physical disturbance, was assessed using robust field and wind tunnel experiments. All surfaces emitted significantly more PM10 after physical disturbance but with considerable variability amongst products. Possible reasons for the differences in relative performance are explored.