Ultra-high Q lithium niobate microring monolithically fabricated by photolithography assisted chemo-mechanical etching.

As one of the element photonic structures, the state-of-the-art thin-film lithium niobate (TFLN) microrings reach an intrinsic quality (Q) factor higher than 107. However, it is difficult to maintain such high-Q factors when monolithically integrated with bus waveguides. Here, a relatively narrow gap of an ultra-high Q monolithically integrated microring is achieved with 3.8 µm, and a high temperature annealing is carried out to improve the loaded (intrinsic) Q factor with 4.29 × 106 (4.04 × 107), leading to an ultra-low propagation loss of less than 1 dB/m, which is approximately 3 times better than the best values previously reported in ion-slicing TFLN platform.

Advances in Sol-Gel-Based Superhydrophobic Coatings for Wood: A Review.

As the focus of architecture, furniture, and other fields, wood has attracted extensive attention for its many advantages, such as environmental friendliness and excellent mechanical properties. Inspired by the wetting model of natural lotus leaves, researchers prepared superhydrophobic coatings with strong mechanical properties and good durability on the modified wood surface. The prepared superhydrophobic coating has achieved functions such as oil-water separation and self-cleaning. At present, some methods such as the sol-gel method, the etching method, graft copolymerization, and the layer-by-layer self-assembly method can be used to prepare superhydrophobic surfaces, which are widely used in biology, the textile industry, national defense, the military industry, and many other fields. However, most methods for preparing superhydrophobic coatings on wood surfaces are limited by reaction conditions and process control, with low coating preparation efficiency and insufficiently fine nanostructures. The sol-gel process is suitable for large-scale industrial production due to its simple preparation method, easy process control, and low cost. In this paper, the research progress on wood superhydrophobic coatings is summarized. Taking the sol-gel method with silicide as an example, the preparation methods of superhydrophobic coatings on wood surfaces under different acid-base catalysis processes are discussed in detail. The latest progress in the preparation of superhydrophobic coatings by the sol-gel method at home and abroad is reviewed, and the future development of superhydrophobic surfaces is prospected.

On-chip ultra-narrow-linewidth single-mode microlaser on lithium niobate on insulator.

We report an on-chip single-mode microlaser with a low threshold fabricated on erbium doped lithium-niobate-on-insulator (LNOI). The single-mode laser emission at 1550.5 nm wavelength is generated in a coupled microdisk via the inverse Vernier effect at room temperature, when pumping the resonator at 977.7 nm wavelength. A threshold pump power as low as 200 µW is demonstrated due to the high quality factor above 106. Moreover, the measured linewidth of the microlaser reaches 348 kHz without discounting the broadening caused by the utilization of optical amplifiers, which is, to our knowledge, the best result in LNOI microlasers. Such a single-mode microlaser lithographically fabricated on chip is in high demand by the photonics community.

Broadband Quasi-Phase-Matched Harmonic Generation in an On-Chip Monocrystalline Lithium Niobate Microdisk Resonator.

We reveal a unique broadband natural quasi-phase-matching (QPM) mechanism underlying an observation of highly efficient second- and third-order harmonic generation at multiple wavelengths in an x-cut lithium niobate (LN) microdisk resonator. For light waves in the transverse-electric mode propagating along the circumference of the microdisk, the effective nonlinear optical coefficients naturally oscillate periodically to change both the sign and magnitude, facilitating QPM without the necessity of domain engineering in the micrometer-scale LN disk. The second-harmonic and cascaded third-harmonic waves are simultaneously generated with normalized conversion efficiencies as high as 9.9%/mW and 1.05%/mW^{2}, respectively, thanks to the utilization of the highest nonlinear coefficient d_{33} of LN. The high efficiency achieved with the microdisk of a diameter of ∼30 µm is beneficial for realizing high-density integration of nonlinear photonic devices such as wavelength convertors and entangled photon sources.

Free-space Ν2+ lasers generated in strong laser fields: the role of molecular vibration.

We investigate free-space lasing actions from molecular nitrogen ions (N2+) at the wavelengths of ~391 nm and ~428 nm. Our results show that pronounced gain can be measured at either 391 nm or 428 nm laser wavelength with a pump laser centered at 800 nm wavelength, whereas the gain at 391 nm laser wavelength completely disappears when the wavelength of the pump laser is tuned to 1500 nm. Our theoretical analysis reveals that the different gain behaviors can be attributed to the vibrational distribution of populations in X2Σg+(v=0) and X2Σg+(v=1) states as the N2+ ions are generated by photoionization in the laser fields, giving rise to more robust (i.e., less sensitive to the pump laser wavelength) population inversion for generating the 428 nm laser.

Lithium niobate micro-disk resonators of quality factors above 107.

We report on the fabrication of crystalline lithium niobate microresonators with quality factors above 107, as measured around 770 nm wavelength. Our technique relies on femtosecond laser micromachining for patterning a mask coated on the lithium niobate on insulate (LNOI) into a microdisk, followed by a chemo-mechanical polishing process for transferring the disk-shaped pattern to the LNOI. Nonlinear processes including second-harmonic generation and Raman scattering have been demonstrated in the fabricated microdisk.

Propagation dynamics of radially polarized pulses in a gas-filled hollow-core fiber.

The propagation dynamics of radially polarized (RP) pulses in a gas-filled hollow-core fiber (HCF) is numerically studied. It is found that the stable transverse mode of RP pulse in HCF is not TM01 mode, nor any eigenmodes in terms of Bessel functions. Compared with linearly polarized (LP) pulses, the RP pulses with the same initial pulse duration and energy have higher transmission efficiency, more uniform spectral broadening, and cleaner temporal profile after highly nonlinear propagation in HCF and better focusing properties. These results suggest that energetic few-cycle RP pulses can be generated more efficiently by directly spectral broadening the RP pulses in HCF followed by temporal compression.

On-chip electro-optic tuning of a lithium niobate microresonator with integrated in-plane microelectrodes.

We demonstrate electro-optic tuning of an on-chip lithium niobate microresonator with integrated in-plane microelectrodes. First, the metallic microelectrodes were fabricated on the substrate using a femtosecond laser. Then high-Q lithium niobate microresonator located between the microelectrodes was further fabricated by femtosecond laser direct writing accompanied by focused ion beam milling. Thanks to the efficient design, a high electro-optical tuning coefficient of 3.41 pm/V has been obtained.

Fabrication of a microresonator-fiber assembly maintaining a high-quality factor by CO2 laser welding.

We demonstrate fabrication of a microtoroid resonator of a high-quality (high-Q) factor using femtosecond laser three-dimensional (3D) micromachining. A fiber taper is reliably assembled to the microtoroid using CO2 laser welding. Specifically, we achieve a high-Q-factor of 2.12 × 10(6) in the microresonator-fiber assembly by optimizing the contact position between the fiber taper and the microtoroid.

Formation of in-volume nanogratings with sub-100-nm periods in glass by femtosecond laser irradiation.

We present direct experimental observation of the morphological evolution during the formation of nanogratings with sub-100-nm periods with the increasing number of pulses. Theoretical simulation shows that the constructive interference of the scattering light from original nanoplanes will create an intensity maximum located between the two adjacent nanoplanes, resulting in shortening the nanograting period by half. The proposed mechanism explains the formation of nanogratings with periods beyond those predicted by the nanoplasmonic model.

Interferometric characterization of pulse front tilt of spatiotemporally focused femtosecond laser pulses.

We report on an experimental measurement of the pulse front tilt (PFT) of spatiotemporally focused femtosecond laser pulses in the focal plane in both air and bulk transparent materials, which is achieved by examination of the interference pattern between the spatiotemporally focused pulse and a conventional focused reference pulse as a function of time delay between the two pulses. Our simulation results agree well with the experimental observations.

Fabrication of an integrated high-quality-factor (high-Q) optofluidic sensor by femtosecond laser micromachining.

We report on fabrication of a microtoroid resonator of a high-quality factor (i.e., Q-factor of ~3.24 × 10(6) measured under the critical coupling condition) integrated in a microfluidic channel using femtosecond laser three-dimensional (3D) micromachining. Coupling of light into and out of the microresonator has been realized with a fiber taper that is reliably assembled with the microtoroid. The assembly of the fiber to the microtoroid is achieved by welding the fiber taper onto the sidewall of the microtoroid using CO2 laser irradiation. The integrated microresonator maintains a high Q-factor of 3.21 × 10(5) as measured in air, which should still be sufficient for many sensing applications. We test the functionality of the integrated optofluidic sensor by performing bulk refractive index sensing of purified water doped with tiny amount of salt. It is shown that a detection limit of ~1.2 × 10(-4) refractive index unit can be achieved. Our result showcases the capability of integration of high-Q microresonators with complex microfluidic systems using femtosecond laser 3D micromachining.

Impulsive rotational Raman scattering of N2 by a remote "air laser" in femtosecond laser filament.

We report on experimental realization of impulsive rotational Raman scattering from neutral nitrogen molecules in a femtosecond laser filament using an intense self-induced white-light seeding "air laser" generated during the filamentation of an 800 nm Ti:sapphire laser in nitrogen gas. The impulsive rotational Raman fingerprint signals are observed with a maximum conversion efficiency of ∼0.8%. Our observation provides a promising way of remote identification and location of chemical species in the atmosphere by a rotational Raman scattering of molecules.

Femtosecond laser fabrication of monolithically integrated microfluidic sensors in glass.

Femtosecond lasers have revolutionized the processing of materials, since their ultrashort pulse width and extremely high peak intensity allows high-quality micro- and nanofabrication of three-dimensional (3D) structures. This unique capability opens up a new route for fabrication of microfluidic sensors for biochemical applications. The present paper presents a comprehensive review of recent advancements in femtosecond laser processing of glass for a variety of microfluidic sensor applications. These include 3D integration of micro-/nanofluidic, optofluidic, electrofluidic, surface-enhanced Raman-scattering devices, in addition to fabrication of devices for microfluidic bioassays and lab-on-fiber sensors. This paper describes the unique characteristics of femtosecond laser processing and the basic concepts involved in femtosecond laser direct writing. Advanced spatiotemporal beam shaping methods are also discussed. Typical examples of microfluidic sensors fabricated using femtosecond lasers are then highlighted, and their applications in chemical and biological sensing are described. Finally, a summary of the technology is given and the outlook for further developments in this field is considered.

Low-Threshold Anti-Stokes Raman Microlaser on Thin-Film Lithium Niobate Chip.

Raman microlasers form on-chip versatile light sources by optical pumping, enabling numerical applications ranging from telecommunications to biological detection. Stimulated Raman scattering (SRS) lasing has been demonstrated in optical microresonators, leveraging high Q factors and small mode volume to generate downconverted photons based on the interaction of light with the Stokes vibrational mode. Unlike redshifted SRS, stimulated anti-Stokes Raman scattering (SARS) further involves the interplay between the pump photon and the SRS photon to generate an upconverted photon, depending on a highly efficient SRS signal as an essential prerequisite. Therefore, achieving SARS in microresonators is challenging due to the low lasing efficiencies of integrated Raman lasers caused by intrinsically low Raman gain. In this work, high-Q whispering gallery microresonators were fabricated by femtosecond laser photolithography assisted chemo-mechanical etching on thin-film lithium niobate (TFLN), which is a strong Raman-gain photonic platform. The high Q factor reached 4.42 × 106, which dramatically increased the circulating light intensity within a small volume. And a strong Stokes vibrational frequency of 264 cm-1 of lithium niobate was selectively excited, leading to a highly efficient SRS lasing signal with a conversion efficiency of 40.6%. And the threshold for SRS was only 0.33 mW, which is about half the best record previously reported on a TFLN platform. The combination of high Q factors, a small cavity size of 120 µm, and the excitation of a strong Raman mode allowed the formation of SARS lasing with only a 0.46 mW pump threshold.

Femtosecond laser nanostructuring in porous glass with sub-50 nm feature sizes.

We report on controllable production of nanostructures embedded in a porous glass by femtosecond laser direct writing. We show that a hollow nanovoid with a lateral size of ~40 nm and an axial size of ~1500 nm can be achieved by manipulating the peak intensity and polarization of the writing laser beam. Our finding enables applications ranging from direct construction of 3D nanofluidics in glass to clean stealth dicing of transparent plates.

On-chip three-dimensional high-Q microcavities fabricated by femtosecond laser direct writing.

We report on the fabrication of three-dimensional (3D) high-Q whispering gallery microcavities on a fused silica chip by femtosecond laser microfabriction, enabled by the 3D nature of femtosecond laser direct writing. The processing mainly consists of formation of freestanding microdisks by femtosecond laser direct writing and subsequent wet chemical etching. CO(2) laser annealing is followed to smooth the microcavity surface. Microcavities with arbitrary tilting angle, lateral and vertical positioning are demonstrated, and the quality (Q)-factor of a typical microcavity is measured to be up to 1.07 × 10(6), which is currently limited by the low spatial resolution of the motion stage used during the laser patterning and can be improved with motion stages of higher resolutions.

Photoactivated green fluorescence emission by femtosecond oscillator from indole solutions.

We reported a novel femtosecond-laser-activated fluorescence emission from indole solutions upon excitation by the second harmonic wavelength of a femtosecond oscillator. A new absorption band around 400 nm and corresponding fluorescent band in the green domain were produced after the irradiation of femtosecond laser. This femtosecond-laser-activated luminescence process that allows the use of visible wavelength as a substitute for UV light to excite fluorescence from indole would extend applications based on indole chromophore. Furthermore, the photoactived emission can act as a fluorescence lifetime probe to measure the polarity in complex biological systems since it is polarity-sensitive. High performance liquid chromatography with fluorescence detector (HPLC-FLU) and high performance liquid chromatography with mass spectrometer (HPLC-MS) analysis demonstrate that the origin of the photoactivated fluorescence is new molecular species that generated in indole solution upon femtosecond laser irradiation.

Photon retention in coherently excited nitrogen ions.

Quantum coherence in quantum optics is an essential part of optical information processing and light manipulation. Alkali metal vapors, despite the numerous shortcomings, are traditionally used in quantum optics as a working medium due to convenient near-infrared excitation, strong dipole transitions and long-lived coherence. Here, we proposed and experimentally demonstrated photon retention and subsequent re-emittance with the quantum coherence in a system of coherently excited molecular nitrogen ions (N2+) which are produced using a strong 800 nm femtosecond laser pulse. Such photon retention, facilitated by quantum coherence, keeps releasing directly-unmeasurable coherent photons for tens of picoseconds, but is able to be read out by a time-delayed femtosecond pulse centered at 1580 nm via two-photon resonant absorption, resulting in a strong radiation at 329.3 nm. We reveal a pivotal role of the excited-state population to transmit such extremely weak re-emitted photons in this system. This new finding unveils the nature of the coherent quantum control in N2+ for the potential platform for optical information storage in the remote atmosphere, and facilitates further exploration of fundamental interactions in the quantum optical platform with strong-field ionized molecules..

High-Precision Propagation-Loss Measurement of Single-Mode Optical Waveguides on Lithium Niobate on Insulator.

We demonstrate the fabrication of single-mode optical waveguides on lithium niobate on an insulator (LNOI) by optical patterning combined with chemomechanical polishing. The fabricated LNOI waveguides had a nearly symmetric mode profile of ~2.5 µm mode field size (full-width at half-maximum). We developed a high-precision measurement approach by which single-mode waveguides were characterized to have propagation loss of ~0.042 dB/cm.