Toward the Coordination Fingerprint of the Edge-Sharing BO4 Tetrahedra.

The K3Sb4BO13 (KSBO) material undergoes an uncommon symmetry increase upon cooling, from triclinic symmetry at room temperature to monoclinic symmetry at low temperature. The first-order phase transition is accompanied by shrinkage of the unit cell, resulting in the transformation of every pair of head-to-tail triangular BO3 groups into one B2O6 unit featuring unique edge-sharing BO4 tetrahedra. This is the first material with B2O6 units formed through temperature lowering and exhibiting a B-O anionic framework composed uniquely of isolated edge-sharing BO4 tetrahedra. Several techniques including single-crystal X-ray diffraction experiments, Raman and 11B magic-angle-spinning NMR spectroscopies, and, for the first time, B K-edge electron energy loss spectroscopy were used to evidence the rare and discrete B2O6 units. The complete transformation of BO3 units into B2O6 units makes the KSBO compound the perfect candidate to extract information about B2O6 units whose signal can be unambiguously assigned.

Tuning the Chemistry of Organonitrogen Compounds for Promoting All-Organic Anionic Rechargeable Batteries.

The ever-increasing demand for rechargeable batteries induces significant pressure on the worldwide metal supply, depleting resources and increasing costs and environmental concerns. In this context, developing the chemistry of anion-inserting electrode organic materials could promote the fabrication of molecular (metal-free) rechargeable batteries. However, few examples have been reported because little effort has been made to develop such anionic-ion batteries. Here we show the design of two anionic host electrode materials based on the N-substituted salts of azaaromatics (zwitterions). A combination of NMR, EDS, FTIR spectroscopies coupled with thermal analyses and single-crystal XRD allowed a thorough structural and chemical characterization of the compounds. Thanks to a reversible electrochemical activity located at an average potential of 2.2 V vs. Li+ /Li, the coupling with dilithium 2,5-(dianilino)terephthalate (Li2 DAnT) as the positive electrode enabled the fabrication of the first all-organic anionic rechargeable batteries based on crystallized host electrode materials capable of delivering a specific capacity of ≈27 mAh/gelectrodes with a stable cycling over dozens of cycles (≈24 Wh/kgelectrodes ).

Metal Atom Clusters as Building Blocks for Multifunctional Proton-Conducting Materials: Theoretical and Experimental Characterization.

The search for new multifunctional materials displaying proton-conducting properties is of paramount necessity for the development of electrochromic devices and supercapacitors as well as for energy conversion and storage. In the present study, proton conductivity is reported for the first time in three molybdenum cluster-based materials: (H)4[Mo6Br6S2(OH)6]-12H2O and (H)2[Mo6X8(OH)6]-12H2O (X = Cl, Br). We show that the self-assembling of the luminescent [Mo6L8i(OH)6a]2-/4- cluster units leads to both luminescence and proton conductivity (σ = 1.4 × 10-4 S·cm-1 in (H)2[Mo6Cl8(OH)6]-12H2O under wet conditions) in the three materials. The latter property results from the strong hydrogen-bond network that develops between the clusters and the water molecules and is magnified by the presence of protons that are statistically shared by apical hydroxyl groups between adjacent clusters. Their role in the proton conduction is highlighted at the molecular scale by ab initio molecular dynamics simulations that demonstrate that concerted proton transfers through the hydrogen-bond network are possible. Furthermore, thermogravimetric analysis also shows the ability of the compounds to accommodate more or less water molecules, which highlights that vehicular (or diffusion) transport probably occurs within the materials. An infrared fingerprint of the mobile protons is finally proposed based on both theoretical and experimental proofs. The present study relies on a synergic computational/experimental approach that can be extended to other proton-conducting materials. It thus paves the way to the design and understanding of new multifunctional proton-conducting materials displaying original and exciting properties.

Location of deuterium sites at operating temperature from neutron diffraction of BaIn0.6Ti0.2Yb0.2O2.6-n(OH)2n, an electrolyte for proton-solid oxide fuel cells.

A fundamental understanding of the doping effect on the hydration mechanism and related proton diffusion pathways are keys to the progress of Proton-Solid Oxide Fuel Cell (H(+)-SOFC) technologies. Here, we elucidate the possible interplay between the crystal structure upon hydration and the conductivity properties in a promising perovskite type H(+)-SOFC electrolyte, BaIn0.6Yb0.2Ti0.2O2.6-n(OH)2n. Thermal X-ray and neutron diffractions, neutron time-of-flight scattering along with thermal gravimetric analysis reveal the structural features of BaIn0.6Ti0.2Yb0.2O2.6-n(OH)2n at fuel cell operating temperatures. Between 400-600 °C, BaIn0.6Yb0.2Ti0.2O2.6-n(OD)2n (n < 0.042) remains in a disordered perovskite structure with high anisotropies in the form of oblate spheroids for oxygen. At 400 °C, the presence of oxygen and proton static disorder is clearly established. Yet, the insertion of mobile protons in 24k sites does not induce long-range structural distortion while facilitating both inter- and intra-octahedral proton transfers via quasi-linear O-DO bonds, strong hydrogen bonding, and octahedral tilting. This experimental evidence reveals that the co-doping approach on Ba2In2O5 enhances greatly protonic conductivity levels by enabling a continuous proton diffusion pathway through BaIn0.6Yb0.2Ti0.2O2.6-n(OH)2n. These new insights into the doping effect on the proton-transfer mechanism offer new perspectives for the development of H(+)-SOFC electrolyte materials.

Investigating the Cycling Stability of Fe2WO6 Pseudocapacitive Electrode Materials.

The stability upon cycling of Fe2WO6 used as a negative electrode material for electrochemical capacitors was investigated. The material was synthesized using low temperature conditions for the first time (220 °C). The electrochemical study of Fe2WO6 in a 5 M LiNO3 aqueous electrolyte led to a specific and volumetric capacitance of 38 F g-1 and 240 F cm-3 when cycled at 2 mV·s-1, respectively, associated with a minor capacitance loss after 10,000 cycles. In order to investigate this very good cycling stability, both surface and bulk characterization techniques (such as Transmission Electron Microscopy, Mössbauer spectroscopy, and magnetization measurements) were used. Only a slight disordering of the Fe3+ cations was observed in the structure, explaining the good stability of the Fe2WO6 upon cycling. This study adds another pseudocapacitive material to the short list of compounds that exhibit such a behavior up to now.

A H-bond stabilized quinone electrode material for Li-organic batteries: the strength of weak bonds.

Small organic materials are generally plagued by their high solubility in battery electrolytes. Finding approaches to suppress solubilization while not penalizing gravimetric capacity remains a challenge. Here we propose the concept of a hydrogen bond stabilized organic battery framework as a viable solution. This is illustrated for 2,5-diamino-1,4-benzoquinone (DABQ), an electrically neutral and low mass organic chemical, yet with unusual thermal stability and low solubility in battery electrolytes. These properties are shown to arise from hydrogen bond molecular crystal stabilization, confirmed by a suite of techniques including X-ray diffraction and infrared spectroscopy. We also establish a quantitative correlation between the electrolyte solvent polarity, molecular structure of the electrolyte and DABQ solubility - then correlate these to the cycling stability. Notably, DABQ displays a highly reversible (above 99%) sequential 2-electron electrochemical activity in the solid phase, a process rarely observed for similar small molecular battery chemistries. Taken together, these results reveal a potential new strategy towards stable and practical organic battery chemistries through intramolecular hydrogen-bonding crystal stabilization.

Nanostructuring, compositional fluctuations, and atomic ordering in the thermoelectric materials AgPb(m)SbTe(2+m). The myth of solid solutions.

The nature of the thermoelectric materials Ag(1-x)Pb(m)SbTe(m+2) or LAST-m materials (LAST for Lead Antimony Silver Tellurium) with different m values at the atomic as well as nanoscale was studied with powder/single-crystal X-ray diffraction, electron diffraction, and high-resolution transmission electron microscopy. Powder diffraction patterns of different members (m = 0, 6, 12, 18, infinity) are consistent with pure phases crystallizing in the NaCl-structure-type (Fmm) and the proposition that the LAST family behaved as solid solutions between the PbTe and AgSbTe2 compounds. However, electron diffraction and high resolution transmission electron microscopy studies suggest the LAST phases are inhomogeneous at the nanoscale with at least two coexisting sets of well-defined phases. The minority phase which is richer in Ag and Sb is on the nanosized length scale, and it is endotaxially embedded in the majority phase which is poorer in Ag and Sb. Moreover, within each nanodomain we observe extensive long range ordering of Ag, Pb, and Sb atoms. The long range ordering can be confirmed by single crystal X-ray diffraction studies. Indeed, data collections of five different single crystals were successfully refined in space groups of lower symmetry than Fmm including P4/mmm and Rm. The results reported here provide experimental evidence for a conceptual basis that could be employed when designing high performance thermoelectric materials and dispel the decades long belief that the systems (AgSbTe2)(1-x)(PbTe)x are solid solutions.

Resonant states in the electronic structure of the high performance thermoelectrics AgPbmSbTe2+m: the role of Ag-Sb microstructures.

Ab initio electronic structure calculations based on gradient corrected density-functional theory were performed on a class of novel quaternary compounds AgPb(m)SbTe(2+m), which were found to be excellent high temperature thermoelctrics with a large figure of merit ZT approximately 2.2 at 800 K. We find that resonant states appear near the top of the valence and bottom of the conduction bands of bulk PbTe when Ag and Sb replace Pb. These states can be understood in terms of modified Te-Ag(Sb) bonds. The electronic structure near the gap depends sensitively on the microstructural arrangements of Ag-Sb atoms, suggesting that large ZT values may originate from the nature of these ordering arrangements.