RESUMEN
This study investigated the color (ΔE) and translucency changes (ΔTP) of CAD/CAM composites after exposure to staining solutions using both spectrophotometer and shade-matching device. Direct (Filtek Z350XT [ZT]), indirect (Shofu Ceramage [CE]) and CAD/CAM (Shofu HC Block [HC], Lava Ultimate [LU], Vita Enamic [EN]) composite specimens measuring 12 × 14 × 1.5 mm were fabricated, divided into five groups (n = 8), and immersed in cola, tea, coffee, red wine, distilled water (control) at 37°C for 7 days. Color parameters were determined with both spectrophotometer and shade-taking device at baseline and 1 week. Delta E (ΔE) with white and black backgrounds, and Delta TP (ΔTP) were computed. Statistical testing was performed with ANOVA and Tukey post hoc test (P < .05). Mean ΔE (white) values ranged from 0.20 ± 0.06 to 12.26 ± 1.95 while mean ΔE (black) varied from 0.22 ± 0.11 to 14.21 ± 2.37. Mean ΔTP values ranged from 0.13 ± 0.17 to -3.87 ± 2.16. CAD/CAM composites fared better in red wine than direct and indirect materials. Clinically perceptible color changes (ΔE > 3.3) were observed for almost all materials when exposed to wine, coffee and tea. Direct, indirect, and CAD/CAM composites are all susceptible to various degrees of discoloration and translucency changes after exposure to staining beverages. Red wine caused the most discoloration and translucency changes. Limitations of these materials must be considered when placing an aesthetic restoration. CLINICAL SIGNIFICANCE: Direct, indirect, and CAD/CAM composites are all susceptible to various degrees of discoloration and translucency changes after exposure to staining beverages. Red wine generally caused the most discoloration and translucency changes. Although CAD/CAM composites were more color stable than direct and indirect materials when exposed to red wine, color changes were still clinically perceptible.