PCR inhibition in qPCR, dPCR and MPS-mechanisms and solutions.

DNA analysis has seen an incredible development in terms of instrumentation, assays and applications over the last years. Massively parallel sequencing (MPS) and digital PCR are now broadly applied in research and diagnostics, and quantitative PCR is used for more and more practises. All these techniques are based on in vitro DNA polymerization and fluorescence measurements. A major limitation for successful analysis is the various sample-related substances that interfere with the analysis, i.e. PCR inhibitors. PCR inhibition affects library preparation in MPS analysis and skews quantification in qPCR, and some inhibitors have been found to quench the fluorescence of the applied fluorophores. Here, we provide a deeper understanding of mechanisms of specific PCR inhibitors and how these impact specific analytical techniques. This background knowledge is necessary in order to take full advantage of modern DNA analysis techniques, specifically for analysis of samples with low amounts of template and high amounts of background material. The classical solution to handle PCR inhibition is to purify or dilute DNA extracts, which leads to DNA loss. Applying inhibitor-tolerant DNA polymerases, either single enzymes or blends, provides a more straightforward and powerful solution. This review includes mechanisms of specific PCR inhibitors as well as solutions to the inhibition problem in relation to cutting-edge DNA analysis.

Inhibition mechanisms of hemoglobin, immunoglobulin G, and whole blood in digital and real-time PCR.

Blood samples are widely used for PCR-based DNA analysis in fields such as diagnosis of infectious diseases, cancer diagnostics, and forensic genetics. In this study, the mechanisms behind blood-induced PCR inhibition were evaluated by use of whole blood as well as known PCR-inhibitory molecules in both digital PCR and real-time PCR. Also, electrophoretic mobility shift assay was applied to investigate interactions between inhibitory proteins and DNA, and isothermal titration calorimetry was used to directly measure effects on DNA polymerase activity. Whole blood caused a decrease in the number of positive digital PCR reactions, lowered amplification efficiency, and caused severe quenching of the fluorescence of the passive reference dye 6-carboxy-X-rhodamine as well as the double-stranded DNA binding dye EvaGreen. Immunoglobulin G was found to bind to single-stranded genomic DNA, leading to increased quantification cycle values. Hemoglobin affected the DNA polymerase activity and thus lowered the amplification efficiency. Hemoglobin and hematin were shown to be the molecules in blood responsible for the fluorescence quenching. In conclusion, hemoglobin and immunoglobulin G are the two major PCR inhibitors in blood, where the first affects amplification through a direct effect on the DNA polymerase activity and quenches the fluorescence of free dye molecules, and the latter binds to single-stranded genomic DNA, hindering DNA polymerization in the first few PCR cycles. Graphical abstract PCR inhibition mechanisms of hemoglobin and immunoglobulin G (IgG). Cq quantification cycle, dsDNA double-stranded DNA, ssDNA single-stranded DNA.

Accurate Digital Polymerase Chain Reaction Quantification of Challenging Samples Applying Inhibitor-Tolerant DNA Polymerases.

Digital PCR (dPCR) enables absolute quantification of nucleic acids by partitioning of the sample into hundreds or thousands of minute reactions. By assuming a Poisson distribution for the number of DNA fragments present in each chamber, the DNA concentration is determined without the need for a standard curve. However, when analyzing nucleic acids from complex matrixes such as soil and blood, the dPCR quantification can be biased due to the presence of inhibitory compounds. In this study, we evaluated the impact of varying the DNA polymerase in chamber-based dPCR for both pure and impure samples using the common PCR inhibitor humic acid (HA) as a model. We compared the TaqMan Universal PCR Master Mix with two alternative DNA polymerases: ExTaq HS and Immolase. By using Bayesian modeling, we show that there is no difference among the tested DNA polymerases in terms of accuracy of absolute quantification for pure template samples, i.e., without HA present. For samples containing HA, there were great differences in performance: the TaqMan Universal PCR Master Mix failed to correctly quantify DNA with more than 13 pg/nL HA, whereas Immolase (1 U) could handle up to 375 pg/nL HA. Furthermore, we found that BSA had a moderate positive effect for the TaqMan Universal PCR Master Mix, enabling accurate quantification for 25 pg/nL HA. Increasing the amount of DNA polymerase from 1 to 5 U had a strong effect for ExTaq HS, elevating HA-tolerance four times. We also show that the average Cq values of positive reactions may be used as a measure of inhibition effects, e.g., to determine whether or not a dPCR quantification result is reliable. The statistical models developed to objectively analyze the data may also be applied in quality control. We conclude that the choice of DNA polymerase in dPCR is crucial for the accuracy of quantification when analyzing challenging samples.

Humic substances cause fluorescence inhibition in real-time polymerase chain reaction.

Real-time polymerase chain reaction (qPCR) is the cornerstone of DNA analysis, enabling detection and quantification of minute nucleic acid amounts. However, PCR-based analysis is limited, in part, by the presence of inhibitors in the samples. PCR inhibition has been viewed solely as failure to efficiently generate amplicons, that is, amplification inhibition. Humic substances (HS) are well-known inhibitors of PCR amplification. Here we show that HS from environmental samples, specifically humic acid (HA), are very potent detection inhibitors, that is, quench the fluorescence signal of double-stranded DNA (dsDNA) binding dyes. HA quenched the fluorescence of the commonly used qPCR dyes EvaGreen, ResoLight, SYBR Green I, and SYTO 82, generating lowered amplification plots, although amplicon production was unaffected. For EvaGreen, 500 ng of HA quenched nearly all fluorescence, whereas 1000 ng of HA completely inhibited amplification when applying Immolase DNA polymerase with bovine serum albumin (BSA). Fluorescence spectroscopy measurements showed that HA quenching was either static or collisional and indicated that HA bound directly to the dye. Fulvic acid did not act as a qPCR detection inhibitor but inhibited amplification similarly to HA. Hydrolysis probe fluorescence was not quenched by HA. Detection inhibition is an overlooked phenomenon that needs to be considered to allow for development of optimal qPCR assays.

Furaldehyde substrate specificity and kinetics of Saccharomyces cerevisiae alcohol dehydrogenase 1 variants.

BACKGROUND: A previously discovered mutant of Saccharomyces cerevisiae alcohol dehydrogenase 1 (Adh1p) was shown to enable a unique NADH-dependent reduction of 5-hydroxymethylfurfural (HMF), a well-known inhibitor of yeast fermentation. In the present study, site-directed mutagenesis of both native and mutated ADH1 genes was performed in order to identify the key amino acids involved in this substrate shift, resulting in Adh1p-variants with different substrate specificities. RESULTS: In vitro activities of the Adh1p-variants using two furaldehydes, HMF and furfural, revealed that HMF reduction ability could be acquired after a single amino acid substitution (Y295C). The highest activity, however, was reached with the double mutation S110P Y295C. Kinetic characterization with both aldehydes and the in vivo primary substrate acetaldehyde also enabled to correlate the alterations in substrate affinity with the different amino acid substitutions. CONCLUSIONS: We demonstrated the key role of Y295C mutation in HMF reduction by Adh1p. We generated and kinetically characterized a group of protein variants using two furaldehyde compounds of industrial relevance. Also, we showed that there is a threshold after which higher in vitro HMF reduction activities do not correlate any more with faster in vivo rates of HMF conversion, indicating other cell limitations in the conversion of HMF.

Inoculation with adapted bacterial communities promotes development of full scale slow sand filters for drinking water production.

Gravity-driven filtration through slow sand filters (SSFs) is one of the oldest methods for producing drinking water. As water passes through a sand bed, undesired microorganisms and chemicals are removed by interactions with SSF biofilm and its resident microbes. Despite their importance, the processes through which these microbial communities form are largely unknown, as are the factors affecting these processes. In this study, two SSFs constructed using different sand sources were compared to an established filter and observed throughout their maturation process. One SSF was inoculated through addition of sand scraped from established filters, while the other was not inoculated. The operational and developing microbial communities of SSFs, as well as their influents and effluents, were studied by sequencing of 16S ribosomal rRNA genes. A functional microbial community resembling that of the established SSF was achieved in the inoculated SSF, but not in the non-inoculated SSF. Notably, the non-inoculated SSF had significantly (p < 0.01) higher abundances of classes Armatimonadia, Elusimicrobia, Fimbriimonadia, OM190 (phylum Planctomycetota), Parcubacteria, Vampirivibrionia and Verrucomicrobiae. Conversely, it had lower abundances of classes Anaerolineae, Bacilli, bacteriap25 (phylum Myxococcota), Blastocatellia, Entotheonellia, Gemmatimonadetes, lineage 11b (phylum Elusimicrobiota), Nitrospiria, Phycisphaerae, subgroup 22 (phylum Acidobacteriota) and subgroup 11 (phylum Acidobacteriota). Poor performance of neutral models showed that the assembly and dispersal of SSF microbial communities was mainly driven by selection. The temporal turnover of microbial species, as estimated through the scaling exponent of the species-time relationship, was twice as high in the non-inoculated filter (0.946 ± 0.164) compared to the inoculated filter (0.422 ± 0.0431). This study shows that the addition of an inoculum changed the assembly processes within SSFs. Specifically, the rate at which new microorganisms were observed in the biofilm was reduced. The reduced temporal turnover may be driven by inoculating taxa inhibiting growth, potentially via secondary metabolite production. This in turn would allow the inoculation community to persist and contribute to SSF function.

Ultrasensitive sequencing of STR markers utilizing unique molecular identifiers and the SiMSen-Seq method.

Massively parallel sequencing (MPS) is increasingly applied in forensic short tandem repeat (STR) analysis. The presence of stutter artefacts and other PCR or sequencing errors in the MPS-STR data partly limits the detection of low DNA amounts, e.g., in complex mixtures. Unique molecular identifiers (UMIs) have been applied in several scientific fields to reduce noise in sequencing. UMIs consist of a stretch of random nucleotides, a unique barcode for each starting DNA molecule, that is incorporated in the DNA template using either ligation or PCR. The barcode is used to generate consensus reads, thus removing errors. The SiMSen-Seq (Simple, multiplexed, PCR-based barcoding of DNA for sensitive mutation detection using sequencing) method relies on PCR-based introduction of UMIs and includes a sophisticated hairpin design to reduce unspecific primer binding as well as PCR protocol adjustments to further optimize the reaction. In this study, SiMSen-Seq is applied to develop a proof-of-concept seven STR multiplex for MPS library preparation and an associated bioinformatics pipeline. Additionally, machine learning (ML) models were evaluated to further improve UMI allele calling. Overall, the seven STR multiplex resulted in complete detection and concordant alleles for 47 single-source samples at 1 ng input DNA as well as for low-template samples at 62.5 pg input DNA. For twelve challenging mixtures with minor contributions of 10 pg to 150 pg and ratios of 1-15% relative to the major donor, 99.2% of the expected alleles were detected by applying the UMIs in combination with an ML filter. The main impact of UMIs was a substantially lowered number of artefacts as well as reduced stutter ratios, which were generally below 5% of the parental allele. In conclusion, UMI-based STR sequencing opens new means for improved analysis of challenging crime scene samples including complex mixtures.

Elevated enterotoxin A expression and formation in Staphylococcus aureus and its association with prophage induction.

Staphylococcus aureus strains producing the bacteriophage-encoded staphylococcal enterotoxin A (SEA) were divided into two groups, high- and low-SEA-producing strains, based on the amount of SEA produced. After growth under favorable conditions in batch cultures, 10 of the 21 strains tested produced more than 1,000 ng/ml SEA, and 9 strains produced less than 10 ng/ml SEA; two enterotoxigenic strains, MRSA252 and Newman, produced intermediate levels of SEA (around 450 ng/ml). The differences in the production of SEA were found to be associated with the expression level of sea and whether the strains hosted the sea(1) or sea(2) version. Furthermore, differences in nucleotide sequence in the Siphoviridae phage region showed two clonal lineages of the high-SEA-producing strains. One of these lines was correlated with the capacity for a massive increase in SEA levels by prophage induction as demonstrated using mitomycin C (MC). This was also confirmed by the occurrence of additional sea expression, presumed to be initiated by a latent phage promoter located upstream of the endogenous sea promoter. Remarkably, the SEA level was increased up to 10-fold in some strains due to prophage induction. The low-SEA-producing group and the high-SEA-producing subgroup lacking phage-activated sea transcription showed no increase in SEA formation after the addition of MC. This study demonstrates that sea expression in enterotoxigenic strains is correlated with the clonal lineage of sea-carrying phages. The high-SEA-producing group, in particular the prophage-inducible sea(1) group, may be more relevant to staphylococcal food poisoning than the low-SEA-producing group, harboring mainly sea(2).

Extended staphylococcal enterotoxin D expression in ham products.

Staphylococcal enterotoxin D (SED) is one of the most frequently recovered enterotoxins in staphylococcal food poisoning (SFP) outbreaks. The expression and production of SED were investigated in three ham products, i.e. boiled ham, smoked ham and dry-cured Serrano ham incubated at room temperature for seven days. Staphylococcus aureus was also, as a reference, grown in cultivation broth during optimal growth conditions for seven days. In boiled and smoked ham, continuous sed expression was observed throughout the incubation period with a second increase in sed expression found after five days of incubation. In smoked ham, nine times less SED per colony-forming unit of S. aureus was detected than in boiled ham. In boiled ham, the SED levels unpredictably decreased after three days of incubation. In the Serrano ham, SED was detected after five days of incubation although S. aureus growth was poor and sed expression was too low to determine. After five days of incubation, all three products contained enough SED to cause SFP. These results show that the specific production levels of SED vary in the different ham products, and that toxin production was in part uncoupled from bacterial growth.

Direct detection of single-nucleotide polymorphisms in bacterial DNA by SNPtrap.

A major challenge with single-nucleotide polymorphism (SNP) fingerprinting of bacteria and higher organisms is the combination of genome-wide screenings with the potential of multiplexing and accurate SNP detection. Single-nucleotide extension by the minisequencing principle represents a technology that both is highly accurate and enables multiplexing. A current bottleneck for direct genome analyses by minisequencing, however, is the sensitivity, since minisequencing relies on linear signal amplification. Here, we present SNPtrap, which is a novel approach that combines the specificity and possibility of multiplexing by minisequencing with the sensitivity obtained by logarithmic signal amplification by polymerase chain reaction (PCR). We show a SNPtrap proof of principle in a model system for two polymorphic SNP sites in the Salmonella tetrathionate reductase gene (ttrC).

Effects of carbon dioxide on growth of proteolytic Clostridium botulinum, its ability to produce neurotoxin, and its transcriptome.

The antimicrobial gas carbon dioxide is frequently used in modified atmosphere packaging. In the present study, the effects of CO2 (10 to 70%, vol/vol) on gene expression (measured using quantitative reverse transcription-PCR and a whole-genome DNA microarray) and neurotoxin formation (measured using an enzyme-linked immunosorbent assay [ELISA]) by proteolytic Clostridium botulinum type A1 strain ATCC 3502 were studied during the growth cycle. Interestingly, in marked contrast to the situation with nonproteolytic C. botulinum types B and E, CO2 had little effect on any of these parameters. At all CO2 concentrations, relative expression of neurotoxin cluster genes peaked in the transition between exponential and stationary phases, with evidence of a second rise in expression in late stationary phase. Microarray analysis enabled identification of coding sequences whose expression profiles matched those of the neurotoxin cluster. Further research is needed to determine whether these are connected to neurotoxin formation or are merely growth phase associated.

Acetic acid increases the phage-encoded enterotoxin A expression in Staphylococcus aureus.

BACKGROUND: The effects of acetic acid, a common food preservative, on the bacteriophage-encoded enterotoxin A (SEA) expression and production in Staphylococcus aureus was investigated in pH-controlled batch cultures carried out at pH 7.0, 6.5, 6.0, 5.5, 5.0, and 4.5. Also, genomic analysis of S. aureus strains carrying sea was performed to map differences within the gene and in the temperate phage carrying sea. RESULTS: The sea expression profile was similar from pH 7.0 to 5.5, with the relative expression peaking in the transition between exponential and stationary growth phase and falling during stationary phase. The levels of sea mRNA were below the detection limit at pH 5.0 and 4.5, confirmed by very low SEA levels at these pH values. The level of relative sea expression at pH 6.0 and 5.5 were nine and four times higher, respectively, in the transitional phase than in the exponential growth phase, compared to pH 7.0 and pH 6.5, where only a slight increase in relative expression in the transitional phase was observed. Furthermore, the increase in sea expression levels at pH 6.0 and 5.5 were observed to be linked to increased intracellular sea gene copy numbers and extracellular sea-containing phage copy numbers. The extracellular SEA levels increased over time, with highest levels produced at pH 6.0 in the four growth phases investigated. Using mitomycin C, it was verified that SEA was at least partially produced as a consequence of prophage induction of the sea-phage in the three S. aureus strains tested. Finally, genetic analysis of six S. aureus strains carrying the sea gene showed specific sea phage-groups and two versions of the sea gene that may explain the different sea expression and production levels observed in this study. CONCLUSIONS: Our findings suggest that the increased sea expression in S. aureus caused by acetic acid induced the sea-encoding prophage, linking SEA production to the lifecycle of the phage.

Synergy between DNA polymerases increases polymerase chain reaction inhibitor tolerance in forensic DNA analysis.

The success rate of diagnostic polymerase chain reaction (PCR) analysis is lowered by inhibitory substances present in the samples. Recently, we showed that tolerance to PCR inhibitors in crime scene saliva stains can be improved by replacing the standard DNA polymerase AmpliTaq Gold with alternative DNA polymerase-buffer systems (Hedman et al., BioTechniques 47 (2009) 951-958). Here we show that blending inhibitor-resistant DNA polymerase-buffer systems further increases the success rate of PCR for various types of real crime scene samples showing inhibition. For 34 of 42 "inhibited" crime scene stains, the DNA profile quality was significantly improved using a DNA polymerase blend of ExTaq Hot Start and PicoMaxx High Fidelity compared with AmpliTaq Gold. The significance of the results was confirmed by analysis of variance. The blend performed as well as, or better than, the alternative DNA polymerases used separately for all tested sample types. When used separately, the performance of the DNA polymerases varied depending on the nature of the sample. The superiority of the blend is discussed in terms of complementary effects and synergy between the DNA polymerase-buffer systems.

Stable coexistence of two Caldicellulosiruptor species in a de novo constructed hydrogen-producing co-culture.

BACKGROUND: Mixed culture enrichments have been used frequently for biohydrogen production from different feedstock. In spite of the several advantages offered by those cultures, they suffer poor H2 yield. Constructing defined co-cultures of known H2 producers may offer a better performance than mixed-population enrichments, while overcoming some of the limitations of pure cultures based on synergies among the microorganisms involved. RESULTS: The extreme thermophiles Caldicellulosiruptor saccharolyticus DSM 8903 and C. kristjanssonii DSM 12137 were combined in a co-culture for H2 production from glucose and xylose in a continuous-flow stirred tank reactor. The co-culture exhibited a remarkable stability over a period of 70 days under carbon-sufficient conditions, with both strains coexisting in the system at steady states of different dilution rates, as revealed by species-specific quantitative PCR assays. The two strains retained their ability to stably coexist in the reactor even when glucose was used as the sole growth-limiting substrate. Furthermore, H2 yields on glucose exceeded those of either organism alone under the same conditions, alluding to a synergistic effect of the two strains on H2 production. A maximum H2 yield of 3.7 mol (mol glucose)(-1) was obtained by the co-culture at a dilution rate of 0.06 h(-1); a higher yield than that reported for any mixed culture to date. A reproducible pattern of population dynamics was observed in the co-culture under both carbon and non-carbon limited conditions, with C. kristjanssonii outgrowing C. saccharolyticus during the batch start-up phase and prevailing at higher dilution rates. A basic continuous culture model assuming the ability of C. saccharolyticus to enhance the growth of C. kristjanssonii could mimic the pattern of population dynamics observed experimentally and provide clues to the nature of interaction between the two strains. As a proof, the cell-free growth supernatant of C. saccharolyticus was found able to enhance the growth of C. kristjanssonii in batch culture through shortening its lag phase and increasing its maximum biomass concentration by ca. 18%. CONCLUSIONS: This study provides experimental evidence on the stable coexistence of two closely related organisms isolated from geographically-distant habitats under continuous operation conditions, with the production of H2 at high yields. An interspecies interaction is proposed as the reason behind the remarkable ability of the two Caldicellulosiruptor strains to coexist in the system rather than only competing for the growth-limiting substrate.

Flotation as a tool for indirect DNA extraction from soil.

Nowadays, soil diversity is accessed at molecular level by the total DNA extraction of a given habitat. However, high DNA yields and purity are difficult to achieve due to the co-extraction of enzyme-inhibitory substances that inhibit downstream applications, such as PCR, restriction enzyme digestion, and DNA ligation. Therefore, there is a need for further development of sample preparation methods that efficiently can result in pure DNA with satisfactory yield. In this study, the buoyant densities of soil microorganisms were utilized to design a sample preparation protocol where microbial cells could be separated from the soil matrix and enzyme-inhibitory substances by flotation. A discontinuous density gradient was designed using a colloidal solution of non-toxic silanised silica particles (BactXtractor). The method proved to be an efficient alternative to direct extraction protocols where cell lysis is performed in the presence of soil particles. The environmental DNA extracted after flotation had high molecular weight and comparable yield as when using available commercial kits (3.5 microg DNA/g soil), and neither PCR nor restriction enzyme digestion of DNA were inhibited. Furthermore, specific primers enabled recovery of both prokaryotic and eukaryotic sequences.

Bacterial release from pipe biofilm in a full-scale drinking water distribution system.

Safe drinking water is delivered to the consumer through kilometres of pipes. These pipes are lined with biofilm, which is thought to affect water quality by releasing bacteria into the drinking water. This study describes the number of cells released from this biofilm, their cellular characteristics, and their identity as they shaped a drinking water microbiome. Installation of ultrafiltration (UF) at full scale in Varberg, Sweden reduced the total cell count to 1.5 × 103 ± 0.5 × 103 cells mL-1 in water leaving the treatment plant. This removed a limitation of both flow cytometry and 16S rRNA amplicon sequencing, which have difficulties in resolving small changes against a high background cell count. Following installation, 58% of the bacteria in the distributed water originated from the pipe biofilm, in contrast to before, when 99.5% of the cells originated from the treatment plant, showing that UF shifts the origin of the drinking water microbiome. The number of bacteria released from the biofilm into the distributed water was 2.1 × 103 ± 1.3 × 103 cells mL-1 and the percentage of HNA (high nucleic acid) content bacteria and intact cells increased as it moved through the distribution system. DESeq2 analysis of 16S rRNA amplicon reads showed increases in 29 operational taxonomic units (OTUs), including genera identified as Sphingomonas, Nitrospira, Mycobacterium, and Hyphomicrobium. This study demonstrated that, due to the installation of UF, the bacteria entering a drinking water microbiome from a pipe biofilm could be both quantitated and described.

The impact of common PCR inhibitors on forensic MPS analysis.

Massively parallel sequencing holds great promise for new possibilities in the field of forensic genetics, enabling simultaneous analysis of multiple markers as well as offering enhanced short tandem repeat allele resolution. A challenge in forensic DNA analysis is that the samples often contain low amounts of DNA in a background that may interfere with downstream analysis. PCR inhibition mechanisms of some relevant molecules have been studied applying e.g. real-time PCR and digital PCR. However, a detailed understanding of the effects of inhibitory molecules on forensic MPS, including mechanisms and ways to relieve inhibition, is missing. In this study, the effects of two well-characterized PCR inhibitors, humic acid and hematin, have been studied using the ForenSeq DNA Signature Prep kit. Humic acid and hematin resulted in lowered read numbers as well as specific negative effects on certain markers. Quality control of libraries with Fragment analyzer showed that increasing amounts of inhibitors caused a lowered amplicon quantity and that the larger amplicons were more likely to drop out. Further, the inhibitor tolerance could be improved 5-10 times by addition of bovine serum albumin in the initial PCR. On the contrary to the samples with inhibitors, low-template samples resulted in lowered read numbers for all markers. This difference strengthened the conclusion that the inhibitors have a negative effect on the DNA polymerase activity in the initial PCR. Additionally, a common capillary gel electrophoresis-based STR kit was shown to handle at least 200 times more inhibitors than the ForenSeq DNA Signature Prep kit. This suggests that there is room for improvement of the PCR components to ensure analytical success for challenging samples, which is needed for a broad application of MPS for forensic STR analysis.

Phosphoketolase pathway dominates in Lactobacillus reuteri ATCC 55730 containing dual pathways for glycolysis.

Metabolic flux analysis indicated that the heterofermentative Lactobacillus reuteri strain ATCC 55730 uses both the Embden-Meyerhof pathway (EMP) and phosphoketolase pathway (PKP) when glucose or sucrose is converted into the three-carbon intermediate stage of glycolysis. In all cases studied, the main flux is through the PKP, while the EMP is used as a shunt. In the exponential growth phase, 70%, 73%, and 84% of the flux goes through the PKP in cells metabolizing (i) glucose plus fructose, (ii) glucose alone, and (iii) sucrose alone, respectively. Analysis of the genome of L. reuteri ATCC 55730 confirmed the presence of the genes for both pathways. Further evidence for the simultaneous operation of two central carbon metabolic pathways was found through the detection of fructose-1,6-bisphosphate aldolase, phosphofructokinase, and phosphoglucoisomerase activities and the presence of phosphorylated EMP and PKP intermediates using in vitro 31P NMR. The maximum specific growth rate and biomass yield obtained on glucose were twice as low as on sucrose. This was the result of low ATP levels being present in glucose-metabolizing cells, although the ATP production flux was as high as in sucrose-metabolizing cells due to a twofold increase of enzyme activities in both glycolytic pathways. Growth performance on glucose could be improved by adding fructose as an external electron acceptor, suggesting that the observed behavior is due to a redox imbalance causing energy starvation.

Identification of an NADH-dependent 5-hydroxymethylfurfural-reducing alcohol dehydrogenase in Saccharomyces cerevisiae.

We report on the identification and characterization of a mutated alcohol dehydrogenase 1 from the industrial Saccharomyces cerevisiae strain TMB3000 that mediates the NADH-dependent reduction of 5-hydroxymethylfurfural (HMF) to 2,5-bis-hydroxymethylfuran. The co-factor preference distinguished this alcohol dehydrogenase from the previously reported NADPH-dependent S. cerevisiae HMF alcohol dehydrogenase Adh6. The amino acid sequence revealed three novel mutations (S109P, L116S and Y294C) that were all predicted at the vicinity of the substrate binding site, which could explain the unusual substrate specificity. Increased biomass production and HMF conversion rate were achieved in a CEN.PK S. cerevisiae strain overexpressing the mutated ADH1 gene.

Effects of carbon dioxide on neurotoxin gene expression in nonproteolytic Clostridium botulinum Type E.

Carbon dioxide is an antimicrobial gas commonly used in modified atmosphere packaging. In the present study, the effects of carbon dioxide on the growth of and neurotoxin production by nonproteolytic Clostridium botulinum type E were studied during the growth cycle. Quantitative reverse transcription-PCR and an enzyme-linked immunosorbent assay were used to quantify expression of the type E botulinum neurotoxin gene (cntE) and the formation of type E neurotoxin. The expression levels of cntE were similar in two strains, with relative expression peaking in the transition between exponential phase and stationary phase. In stationary phase, cntE mRNA expression declined rapidly. The cntE mRNA half-life was calculated to be approximately 9 minutes. Neurotoxin formation occurred in late exponential phase and stationary phase. High carbon dioxide concentrations delayed growth by increasing the lag time and decreasing the maximum growth rate. The effects of carbon dioxide concentration on relative neurotoxin gene expression and neurotoxin formation were significant. Expression of cntE mRNA and the formation of extracellular neurotoxin were twofold higher with a headspace carbon dioxide concentration of 70% (vol/vol) compared to 10% (vol/vol). This finding sheds a new, cautionary light on the potential risks of botulism associated with the use of modified atmosphere packaging.