Evidence of symmetry breaking in a Gd2 di-nuclear molecular polymer.

A chiral 3D coordination compound, [Gd2(L)2(ox)2(H2O)2], arranged around a dinuclear Gd unit has been characterized by X-ray photoemission and X-ray absorption measurements in the context of density functional theory studies. Core level photoemission of the Gd 5p multiplet splittings indicates that spin orbit coupling dominates over j-J coupling evident in the 5p core level spectra of Gd metal. Indications of spin-orbit coupling are consistent with the absence of inversion symmetry due to the ligand field. Density functional theory predicts antiferromagnet alignment of the Gd2 dimers and a band gap of the compound consistent with optical absorption.

Electron-phonon interaction and ultrafast photoemission from doped monolayer MoS2.

We have examined the effect of electron-phonon coupling on photoluminescence and ultrafast response of electron doped monolayer MoS2, using a combination of density functional theory, time dependent density functional theory, and many-body theory. For small doping (∼1-3%) of interest here, the electron-phonon coupling parameter is modest (∼0.1-0.2) but its effect on the emissive properties and response of the system to femtosecond (fs) laser pulses is striking. We find an ultrafast (fs) relaxation of the electronic subsystem as well as a high fluence of visible light emission induced by electron phonon interaction. Together with high carrier mobility, these features of monolayer MoS2 may be relevant for optoelectronic technologies.

Asymmetric Design of Spin-Crossover Complexes to Increase the Volatility for Surface Deposition.

A mononuclear complex [Fe(tBu2qsal)2] has been obtained by a reaction between an Fe(II) precursor salt and a tridentate ligand 2,4-di(tert-butyl)-6-((quinoline-8-ylimino)methyl)phenol (tBu2qsalH) in the presence of triethylamine. The complex exhibits a hysteretic spin transition at 117 K upon cooling and 129 K upon warming, as well as light-induced excited spin-state trapping at lower temperatures. Although the strongly cooperative spin transition suggests substantial intermolecular interactions, the complex is readily sublimable, as evidenced by the growth of its single crystals by sublimation at 573 → 373 K and ∼10-3 mbar. This seemingly antagonistic behavior is explained by the asymmetric coordination environment, in which the tBu substituents and quinoline moieties appear on opposite sides of the complex. As a result, the structure is partitioned in well-defined layers separated by van der Waals interactions between the tBu groups, while the efficient cooperative interactions within the layer are provided by the quinoline-based moieties. The abrupt spin transition is preserved in a 20 nm thin film prepared by sublimation, as evidenced by abrupt and hysteretic changes in the dielectric properties in the temperature range comparable to the one around which the spin transition is observed for the bulk material. The changes in the dielectric response are in excellent agreement with differences in the dielectric tensor of the low-spin and high-spin crystal structures evaluated by density functional theory calculations. The substantially higher volatility of [Fe(tBu2qsal)2], as compared to a similar complex without tBu substituents, suggests that asymmetric molecular shapes offer an efficient design strategy to achieve sublimable complexes with strongly cooperative spin transitions.

Syngas molecules as probes for defects in 2D hexagonal boron nitride: their adsorption and vibrations.

Single-layer, defect-laden hexagonal boron nitride (dh-BN) is attracting a great deal of attention for its diverse applications: catalysis on the one hand, and single photon emission on the other. As possible probes for identifying some common defects in single-layer h-BN, we present results of ab initio calculations for the adsorption and vibrational characteristics of syngas molecules (H2, CO, CO2) on dh-BN containing one of four types of defects: nitrogen vacancy (VN), boron vacancy (VB), Stone-Wales defect (SW), and nitrogen substituted by boron (BN). Through a comparative examination of adsorption features, charge transfer, electronic structure, and vibrational spectrum, we obtain a deep understanding of the interaction of these molecules with dh-BN and the role of the defect states. We find that while CO, CO2 and atomic hydrogen chemisorb, molecular H2 physisorbs on dh-BN with the four considered defect types. VN and VB show strong affinity for CO and CO2 since the defect states induced by them lie close to the Fermi level. SW does not favor adsorption of these small molecules, as the process for each is endothermic. In the case of BN, CO adsorbs strongly but CO2 only weakly. Vibrational frequencies of notable modes localized at the adsorbed molecules are analyzed and suggested as measures for identification of the defect type. Through a simple comparison of adsorption characteristics of the molecules on these defects, we propose dh-BN with VN to be a good catalyst candidate for CO2 hydrogenation.

Toward alcohol synthesis from CO hydrogenation on Cu(111)-supported MoS2 - predictions from DFT+KMC.

In the quest for cheap and efficient catalysts for alcohol synthesis from syngas, a material of interest is single-layer MoS2 owing to its low cost, abundancy, and flexible structure. Because of the inertness of its basal plane, however, it is essential to find ways that make it catalytically active. Herein, by means of density functional theory based calculations of reaction pathways and activation energy barriers and accompanying kinetic Monte Carlo simulations, we show that while S vacancy row structures activate the MoS2 basal plane, further enhancement of chemical activity and selectivity can be achieved by interfacing the MoS2 layer with a metallic support. When defect-laden MoS2 is grown on Cu(111), there is not only an increase in the active region (surface area of active sites) but also charge transfer from Cu to MoS2, resulting in a shift of the Fermi level such that the frontier states (d orbitals of the exposed Mo atoms) appear close to it, making the MoS2/Cu(111) system ready for catalytic activity. Our calculated thermodynamics of reaction pathways lead to the conclusion that the Cu(111) substrate promotes both methanol and ethanol as the products, while kinetic Monte Carlo simulations suggest a high selectivity toward the formation of ethanol.

Atomic-Scale Structure and Catalysis on Positively Charged Bimetallic Sites for Generation of H2.

Here, we report that a cationic bimetallic site consisting of one Pd and three Zn atoms (Pd1Zn3) supported on ZnO (Pd1Zn3/ZnO) exhibits an extraordinarily high catalytic activity for the generation of H2 through methanol partial oxidation (MPO) that is 2-3 orders of magnitude higher than that of a metallic Pd-Zn site on Pd-Zn nanoalloy (Pd-Zn/ZnO). Computational studies uncovered that the positively charged Pd atom of the subnanometer Pd1Zn3 bimetallic site largely decreases the activation barrier for dehydrogenation of methanol as compared to a metallic Pd atom of Pd-Zn alloy, thus switching the rate-determining step of MPO from methanol dehydrogenation over a Pd-Zn alloy with high barrier to the O2 dissociation step on a cationic Pd1Zn3 site with a low barrier, which is supported by our kinetics studies. The significantly higher catalytic activity and selectivity for H2 production over a cationic bimetallic site suggest a new approach to design bimetallic catalysts.

CO Oxidation Mechanisms on CoOx-Pt Thin Films.

The reaction of CO and O2 with submonolayer and multilayer CoOx films on Pt(111), to produce CO2, was investigated at room temperature in the mTorr pressure regime. Using operando ambient pressure X-ray photoelectron spectroscopy and high pressure scanning tunneling microscopy, as well as density functional theory calculations, we found that the presence of oxygen vacancies in partially oxidized CoOx films significantly enhances the CO oxidation activity to form CO2 upon exposure to mTorr pressures of CO at room temperature. In contrast, CoO films without O-vacancies are much less active for CO2 formation at RT, and CO only adsorbed in the form of carbonate species that are stable up to 260 °C. On submonolayer CoOx islands, the carbonates form preferentially at island edges, deactivating the edge sites for CO2 formation, even while the reaction proceeds inside the islands. These results provide a detailed understanding of CO oxidation pathways on systems where noble metals such as Pt interact with reducible oxides.

Ultrafast Electron Correlations and Memory Effects at Work: Femtosecond Demagnetization in Ni.

Experimental observations of the ultrafast (less than 50 fs) demagnetization of Ni have so far defied theoretical explanations particularly since its spin-flipping time is much less than that resulting from spin-orbit and electron-lattice interactions. Through the application of an approach that benefits from spin-flip time-dependent density-functional theory and dynamical mean-field theory, we show that proper inclusion of electron correlations and memory (time dependence of electron-electron interaction) effects leads to demagnetization at the femtosecond scale, in good agreement with experimental observations. Furthermore, our calculations reveal that this ultrafast demagnetization results mainly from spin-flip transitions from occupied to unoccupied orbitals implying a dynamical reduction of exchange splitting. These conclusions are found to be valid for a wide range of laser pulse amplitudes. They also pave the way for ab initio investigations of ultrafast charge and spin dynamics in a variety of quantum materials in which electron correlations may play a definitive role.

Catalytic C2H2 synthesis via low temperature CO hydrogenation on defect-rich 2D-MoS2 and 2D-MoS2 decorated with Mo clusters.

Rational design of novel catalytic materials used to synthesize storable fuels via the CO hydrogenation reaction has recently received considerable attention. In this work, defect poor and defect rich 2D-MoS2 as well as 2D-MoS2 decorated with Mo clusters are employed as catalysts for the generation of acetylene (C2H2) via the CO hydrogenation reaction. Temperature programmed desorption is used to study the interaction of CO and H2 molecules with the MoS2 surface as well as the formation of reaction products. The experiments indicate the presence of four CO adsorption sites below room temperature and a competitive adsorption between the CO and H2 molecules. The investigations show that CO hydrogenation is not possible on defect poor MoS2 at low temperatures. However, on defect rich 2D-MoS2, small amounts of C2H2 are produced, which desorb from the surface at temperatures between 170 K and 250 K. A similar C2H2 signal is detected from defect poor 2D-MoS2 decorated with Mo clusters, which indicates that low coordinated Mo atoms on 2D-MoS2 are responsible for the formation of C2H2. Density functional theory investigations are performed to explore possible adsorption sites of CO and understand the formation mechanism of C2H2 on MoS2 and Mo7/MoS2. The theoretical investigation indicates a strong binding of C2H2 on the Mo sites of MoS2 preventing the direct desorption of C2H2 at low temperatures as observed experimentally. Instead, the theoretical results suggest that the experimental data are consistent with a mechanism in which CHO radical dimers lead to the formation of C2H2 that presents an exothermic desorption.

Multi-electron Reduction Capacity and Multiple Binding Pockets in Metal-Organic Redox Assembly at Surfaces.

Metal-ligand complexation at surfaces utilizing redox-active ligands has been demonstrated to produce uniform single-site metals centers in regular coordination networks. Two key design considerations are the electron storage capacity of the ligand and the metal-coordinating pockets on the ligand. In an effort to move toward greater complexity in the systems, particularly dinuclear metal centers, we designed and synthesized tetraethyltetra-aza-anthraquinone, TAAQ, which has superior electron storage capabilities and four ligating pockets in a diverging geometry. Cyclic voltammetry studies of the free ligand demonstrate its ability to undergo up to a four-electron reduction. Solution-based studies with an analogous ligand, diethyldi-aza-anthraquinone, demonstrate these redox capabilities in a molecular environment. Surface studies conducted on the Au(111) surface demonstrate TAAQ's ability to complex with Fe. This complexation can be observed at different stoichiometric ratios of Fe:TAAQ as Fe 2p core level shifts in X-ray photoelectron spectroscopy. Scanning tunneling microscopy experiments confirmed the formation of metal-organic coordination structures. The striking feature of these structures is their irregularity, which indicates the presence of multiple local binding motifs. Density functional theory calculations confirm several energetically accessible Fe:TAAQ isomers, which accounts for the non-uniformity of the chains.

Redox Isomeric Surface Structures Are Preferred over Odd-Electron Pt1.

The formation of metal-ligand coordination networks on surfaces that contain redox isomers is a topic of considerable interest and is important for bifunctional metallochemistry, including heterogeneous catalysis. Towards this end, a tetrazine with two electron withdrawing pyrimidinyl substituents was co-deposited with platinum metal on the Au(100) surface. In a 2:1 metal:ligand ratio, only half of the platinum is oxidized to the +2 oxidation state, with the remainder coordinating to the ligand without charge transfer, as Pt0 . The resultant Pt0 /PtII mixed valence structure is thought to form due to the aversion of the ligand towards a four-electron reduction and the strong preference of Pt towards 0 and +2 oxidation states. These results were confirmed through a series of experiments varying the on-surface metal:ligand stoichiometry in the redox assembly formed: added oxidant does not oxidize the already complexed Pt0 . Scanning tunneling microscopy reveals irregular chain structures that are attributed to the mixture of Pt valence states, each with distinct local coordination geometries. Density functional theory calculations give further detail about these local geometries. These results demonstrate the formation of a mixture of valence states in on-surface redox assembly of metal-organic networks that extends the library of single-site metal structures for surface chemistry and catalysis. Redox-isomeric Pt0 versus Pt2+ surface structures can coexist in this ligand environment.

Pentacene Excitons in Strong Electric Fields.

Electroluminescence spectroscopy of organic semiconductors in the junction of a scanning tunneling microscope (STM) provides access to the polarizability of neutral excited states in a well-characterized molecular geometry. We study the Stark shift of the self-trapped lowest singlet exciton at 1.6 eV in a pentacene nanocrystal. Combination of density functional theory (DFT) and time-dependent DFT (TDDFT) with experiment allows for assignment of the observation to a charge-transfer (CT) exciton. Its charge separation is perpendicular to the applied field, as the measured polarizability is moderate and the electric field in the STM junction is strong enough to dissociate a CT exciton polarized parallel to the applied field. The calculated electric-field-induced anisotropy of the exciton potential energy surface will also be of relevance to photovoltaic applications.

Adatom Extraction from Pristine Metal Terraces by Dissociative Oxygen Adsorption: Combined STM and Density Functional Theory Investigation of O/Ag(110).

The reconstruction and modification of metal surfaces upon O_{2} adsorption plays an important role in oxidation processes and in gauging their catalytic activity. Here, we show by employing scanning tunneling microscopy and the ab initio density functional theory that Ag atoms are extracted from pristine (110) terraces upon O_{2} dissociation, resulting in vacancies and in Ag-O complexes. The substrate roughening generates undercoordinated atoms and opens pathways to the Ag subsurface layer. With increasing O coverage, multiple vacancies give rise to remarkable structures. The mechanism is expected to be very general depending on the delicate interplay of energy and entropy, so that it may be active for other materials at different temperatures.

Pt-dipyridyl tetrazine metal-organic network on the Au(100) surface: insights from first principles calculations.

Metal-organic coordination networks with active metal centers are a promising class of materials for next-generation catalysts. Motivated by experimental observations of the formation of a Pt-Dipyridyl Tetrazine (DT) metal-organic network on the Au(100) surface [D. Skomski et al., J. Am. Chem. Soc., 2014, 136, 9862], we carried out density functional theory based calculations on the same system. In this discussion, we demonstrate that the strong interaction between DT ligands and Pt metal centers makes the network stable and that the Pt centers become positively charged by donating their electrons to the DT ligands, resulting in +2 oxidation states for the Pt centers. We further show that the Au substrate withdraws electrons from and hybridizes with the dz2 orbital of the Pt centers, altering their electronic structure and related properties. Furthermore, we find that the Pt centers can absorb SO2via donor-acceptor interactions, leading to the formation of σ-bonds in which Pt dz2 orbitals act as electron donors, and that the strength of the resultant σ-bond depends on the registry of the Pt centers with the Au(100) surface. Finally, we identify factors, such as the specificity of the ligands and the substrate, and the fullness of the outer shell of the metal centers, that may affect the chemical properties of the metal centers. We suggest modifications (and replacement) of these factors as one of the ways to tune and design metal-organic coordination networks for next-generation catalysts.

Nanoscale plasmonic phenomena in CVD-grown MoS(2) monolayer revealed by ultra-broadband synchrotron radiation based nano-FTIR spectroscopy and near-field microscopy.

Nanoscale plasmonic phenomena observed in single and bi-layers of molybdenum disulfide (MoS(2)) on silicon dioxide (SiO(2)) are reported. A scattering type scanning near-field optical microscope (s-SNOM) with a broadband synchrotron radiation (SR) infrared source was used. We also present complementary optical mapping using tunable CO(2)-laser radiation. Specifically, there is a correlation of the topography of well-defined MoS(2) islands grown by chemical vapor deposition, as determined by atomic force microscopy, with the infrared (IR) signature of MoS(2). The influence of MoS(2) islands on the SiO(2) phonon resonance is discussed. The results reveal the plasmonic character of the MoS(2) structures and their interaction with the SiO(2) phonons leading to an enhancement of the hybridized surface plasmon-phonon mode. A theoretical analysis shows that, in the case of monolayer islands, the coupling of the MoS(2) optical plasmon mode to the SiO(2) surface phonons does not affect the infrared spectrum significantly. For two-layer MoS(2), the coupling of the extra inter-plane acoustic plasmon mode with the SiO(2) surface transverse phonon leads to a remarkable increase of the surface phonon peak at 794 cm(-1). This is in agreement with the experimental data. These results show the capability of the s-SNOM technique to study local multiple excitations in complex non-homogeneous structures.

Nanoscale plasmonic phenomena in CVD-grown MoS2 monolayer revealed by ultra-broadband synchrotron radiation based nano-FTIR spectroscopy and near-field microscopy: publisher's note.

This publisher's note amends the Acknowledgments of a recent publication [Opt. Express24, 1154 (2016)10.1364/OE.24.001154].

pH-Induced Surface Modification of Atomically Precise Silver Nanoclusters: An Approach for Tunable Optical and Electronic Properties.

Noble metal nanoclusters (NCs) play a pivotal role in bridging the gap between molecules and quantum dots. Fundamental understanding of the evolution of the structural, optical, and electronic properties of these materials in various environments is of paramount importance for many applications. Using state-of-the-art spectroscopy, we provide the first decisive experimental evidence that the structural, electronic, and optical properties of Ag44(MNBA)30 NCs can now be tailored by controlling the chemical environment. Infrared and photoelectron spectroscopies clearly indicate that there is a dimerization between two adjacent ligands capping the NCs that takes place upon lowering the pH from 13 to 7.

Geometric and electronic structure and magnetic properties of Fe-Au nanoalloys: insights from ab initio calculations.

We have performed density functional theory (DFT) based calculations of Fe-Au nanoalloys containing 113 atoms, Fe(x)Au(113-x) (x = 23, 56, 90), to determine their preferred geometric structure and the ensuing electronic structural and magnetic properties. We find that these nanoalloys prefer the formation of a core-shell structure and the Fe core maintains almost a constant magnetic moment of ∼2.8 µ(B) regardless of the Fe content, which is 27% enhancement from the bulk value and in qualitative agreement with some previous results. The local magnetic moment of Fe atoms is well correlated with the local coordination of the Fe atoms. Furthermore, the enhancement of the magnetic moment may be traced to charge depletion from the Fe atoms in the core to the Au atoms in the shell. The preference for the core-shell structure over one with segregated Fe and Au parts could be the low surface tension at the Fe-Au interface, which is larger for the core-shell structure, and can be attributed to strong Fe-Au interfacial interaction as a result of large charge transfer at the interface.

Breaking Continuously Packed Bimetallic Sites to Singly Dispersed on Nonmetallic Support for Efficient Hydrogen Production.

We have synthesized Pt1Zn3/ZnO, also termed 0.01 wt %Pt/ZnO-O2-H2, as a catalyst containing singly dispersed single-atom bimetallic sites, also called a catalyst of singly dispersed bimetallic sites or a catalyst of isolated single-atom bimetallic sites. Its catalytic activity in partial oxidation of methanol to hydrogen at 290 °C is found to be 2-3 orders of magnitude higher than that of Pt-Zn bimetallic nanoparticles supported on ZnO, 5.0 wt %Pt/ZnO-N2-H2. Selectivity for H2 on Pt1Zn3/ZnO reaches 96%-100% at 290-330 °C, arising from the uniform coordination environment of single-atom Pt1 in singly dispersed single-atom bimetallic sites, Pt1Zn3 on 0.01 wt %Pt/ZnO-O2-H2, which is sharply different from various coordination environments of Pt atoms in coexisting PtxZny (x ≥ 0, y ≥ 0) sites on Pt-Zn bimetallic nanoparticles. Computational simulations attribute the extraordinary catalytic performance of Pt1Zn3/ZnO to the stronger adsorption of methanol and the lower activation barriers in O-H dissociation of CH3OH, C-H dissociations of CH2O to CO, and coupling of intermediate CO with atomic oxygen to form CO2 on Pt1Zn3/ZnO as compared to those on Pt-Zn bimetallic nanoparticles. It demonstrates that anchoring uniform, isolated single-atom bimetallic sites, also called singly dispersed bimetallic sites on a nonmetallic support can create new catalysts for certain types of reactions with much higher activity and selectivity in contrast to bimetallic nanoparticle catalysts with coexisting, various metallic sites MxAy (x ≥ 0, y ≥ 0). As these single-atom bimetallic sites are cationic and anchored on a nonmetallic support, the catalyst of singly dispersed single-atom bimetallic sites is different from a single-atom alloy nanoparticle catalyst. The critical role of the 0.01 wt %Pt in the extraordinary catalytic performance calls on fundamental studies of the profound role of a trace amount of a metal in heterogeneous catalysis.

Increased Selectivity in Photolytic Activation of Nanoassemblies Compared to Thermal Activation in On-Surface Ullmann Coupling.

On-surface synthesis is a powerful method that has emerged recently to fabricate a large variety of atomically precise nanomaterials on surfaces based on polymerization. It is very successful for thermally activated reactions within the framework of heterogeneous catalysis. As a result, it often lacks selectivity. We propose to use selective activation of specific bonds as a crucial ingredient to synthesize desired molecules with high selectivity. In this approach, thermally nonaccessible products are expected to arise in photolytically activated on-surface reactions with high selectivity. We demonstrate for assembled 2,2'-dibromo biphenyl clusters on Cu(111) that the thermal and photolytic activations yield distinctly different products, combining submolecular resolution of individual product molecules in real-space imaging by scanning tunneling microscopy with chemical identification in X-ray photoelectron spectroscopy and supported by ab initio calculations. The photolytically activated Ullmann coupling of 2,2'-dibromo biphenyl is highly selective, with only one identified product. It starkly contrasts the thermal reaction, which yields various products because alternate pathways are activated at the reaction temperature. Our study extends on-surface synthesis to a directed formation of thermally inaccessible products by direct bond activation. It promises tailored reactions of nanomaterials within the framework of on-surface synthesis based on the photolytic activation of specific bonds.