Is it necessary to perform measurement-based patient-specific quality assurance for online adaptive radiotherapy with Elekta Unity MR-Linac?

This study aimed to investigate the necessity of measurement-based patient-specific quality assurance (PSQA) for online adaptive radiotherapy by analyzing measurement-based PSQA results and calculation-based 3D independent dose verification results with Elekta Unity MR-Linac. There are two workflows for Elekta Unity enabled in the treatment planning system: adapt to position (ATP) and adapt to shape (ATS). ATP plans are those which have relatively slighter shifts from reference plans by adjusting beam shapes or weights, whereas ATS plans are the new plans optimized from the beginning with probable re-contouring targets and organs-at-risk. PSQA gamma passing rates were measured using an MR-compatible ArcCHECK diode array for 78 reference plans and corresponding 208 adaptive plans (129 ATP plans and 79 ATS plans) of Elekta Unity. Subsequently, the relationships between ATP, or ATS plans and reference plans were evaluated separately. The Pearson's r correlation coefficients between ATP or ATS adaptive plans and corresponding reference plans were also characterized using regression analysis. Moreover, the Bland-Altman plot method was used to describe the agreement of PSQA results between ATP or ATS adaptive plans and reference plans. Additionally, Monte Carlo-based independent dose verification software ArcherQA was used to perform secondary dose check for adaptive plans. For ArcCHECK measurements, the average gamma passing rates (ArcCHECK vs. TPS) of PSQA (3%/2 mm criterion) were 99.51% ± 0.88% and 99.43% ± 0.54% for ATP and ATS plans, respectively, which were higher than the corresponding reference plans 99.34% ± 1.04% (p < 0.05) and 99.20% ± 0.71% (p < 0.05), respectively. The Pearson's r correlation coefficients were 0.720 between ATP and reference plans and 0.300 between ATS and reference plans with ArcCHECK, respectively. Furthermore, >95% of data points of differences between both ATP and ATS plans and reference plans were within ±2σ (standard deviation) of the mean difference between adaptive and reference plans with ArcCHECK measurements. With ArcherQA calculation, the average gamma passing rates (ArcherQA vs. TPS) were 98.23% ± 1.64% and 98.15% ± 1.07% for ATP and ATS adaptive plans, separately. It might be unnecessary to perform measurement-based PSQA for both ATP and ATS adaptive plans for Unity if the gamma passing rates of both measurements of corresponding reference plans and independent dose verification of adaptive plans have high gamma passing rates. Periodic machine QA and verification of adaptive plans were recommended to ensure treatment safety.

Rheinheimera oceanensis sp. nov., a novel member of the genus Rheinheimera, isolated from the West Pacific Ocean.

Two Gram-stain-negative, aerobic, non-motile and short-rod-shaped bacteria, designated as strains GL-53T and GL-15-2-5, were isolated from the seamount area of the West Pacific Ocean and identified using a polyphasic taxonomic approach. The growth of strains GL-53ᵀ and GL-15-2-5 occurred at pH 5.5-10.0, 4-40 °C (optimum at 28 °C) and 0-10.0 % NaCl concentrations (optimum at 0-5.0 %). On the basis of 16S rRNA gene sequence analysis, strains GL-53ᵀ and GL-15-2-5 exhibited the highest similarity to Rheinheimera lutimaris YQF-2T (98.4 %), followed by Rheinheimera pacifica KMM 1406T (98.1 %), Rheinheimera nanhaiensis E407-8T (97.4 %), Rheinheimera aestuarii H29T (97.4 %), Rheinheimera hassiensis E48T (97.2 %) and Rheinheimera aquimaris SW-353T (97.2 %). Phylogenetic analysis revealed that the isolates were affiliated with the genus Rheinheimera and represented an independent lineage. The major fatty acids were summed feature 3 (C16 : 1 ω7c and/or C16 : 1 ω6c), C16 : 0 and summed feature 8 (C18 : 1 ω7c and/or C18 : 1 ω6c). The sole isoprenoid quinone was ubiquinone 8. The major polar lipids were phosphatidylethanolamine, phosphatidylglycerol, one unidentified aminophospholipid (and one unidentified glycolipid. The DNA G+C content was 48.5 mol%. The average nucleotide identity, average amino acid identity and in silico DNA-DNA hybridization values among the genomes of strain GL-53ᵀ and the related strains in the genus Rheinheimera were 75.5-90.1 %, 67.5-93.9 % and 21.4-41.4 %, respectively. Based on their phenotypic, chemotaxonomic and genotypic properties, the two strains were identified as representing a novel species of the genus Rheinheimera, for which the name Rheinheimera oceanensis sp. nov. is proposed. The type strain is GL-53T (=KCTC 82651T=MCCC M20598T).

Structural Evolution of Cellulose from Bamboo Fibers and Parenchyma Cells during Ionic Liquid Pretreatment for Enhanced Hydrolysis.

Bamboo fibers and parenchyma cells, the two dominant types of cells in bamboo, exhibit some interesting differences in cellulose crystalline structures. In the present investigation, we further demonstrated that these structural differences affect their response during ionic liquid (IL) pretreatment and the sugar conversion yield, by tracking their changes in morphology, chemical, and crystalline structures. All of the results pointed to the fact that the cellulose from bamboo fibers exhibited higher recalcitrance to IL pretreatment, with a significantly lower change in crystallinity index, d spacings from the (110) and (11̅0) planes, crystallite sizes, and easier transformation from cellulose I to cellulose II after pretreatment, as compared to that from parenchyma cells. Furthermore, the crystalline parameters of (110) and (11̅0) lattice planes exhibited more changes compared to the (200) direction. This investigation highlights the significance of parenchyma cell wastes from bamboo processing plants as a competitive candidate for the biorefinery industry.

Thiosulfatihalobacter marinus gen. nov. sp. nov., a novel member of the family Roseobacteraceae, isolated from the West Pacific Ocean.

Two strains (GL-11-2T and ZH2-Y79) were isolated from the seawater collected from the West Pacific Ocean and the East China Sea, respectively. Cells were Gram-stain-negative, strictly aerobic, non-motile and rod-shaped. Cells grew in the medium containing 0.5-7.5 % NaCl (w/v, optimum, 1.0-3.0 %), at pH 6.0-8.0 (optimum, pH 6.5-7.0) and at 4-40 °C (optimum, 30 °C). H2S production occurred in marine broth supplemented with sodium thiosulphate. The almost-complete 16S rRNA gene sequences of the two isolates were identical, and exhibited the highest similarity to Pseudoruegeria aquimaris JCM 13603T (97.5 %), followed by Ruegeria conchae TW15T (97.2%), Shimia aestuarii DSM 15283T (97.1 %) and Ruegeria lacuscaerulensis ITI-1157T (97.0 %). Phylogenetic analysis revealed that the isolates were affiliated with the family Roseobacteraceae and represented an independent lineage. The sole isoprenoid quinone was ubiquinone 10. The principal fatty acids were summed feature 8 (C18 : 1 ω7c and/or C18 : 1 ω6c) and cyclo-C19 : 0 ω8c. The major polar lipids were phosphatidylglycerol, phosphatidylethanolamine, phosphatidylcholine and diphosphatidylglycerol. The DNA G+C content was 62.3 mol%. The orthologous average nucleotide identity, in silico DNA-DNA hybridization and average amino acid identity values among the genomes of strain GL-11-2T and the reference strains were 73.2-79.0, 20.3-22.5 and 66.0-80.8 %, respectively. Strains GL-11-2ᵀ and ZH2-Y79 possessed complete metabolic pathways for thiosulphate oxidation, dissimilatory nitrate reduction and denitrification. Phylogenetic distinctiveness, chemotaxonomic differences and phenotypic properties revealed that the isolates represent a novel genus and species of the family Roseobacteraceae, belonging to the class Alphaproteobacteria, for which the name Thiosulfatihalobacter marinus gen. nov., sp. nov. (type strain, GL-11-2T=KCTC 82723T=MCCC M20691T) is proposed.

Mesobacterium pallidum gen. nov., sp. nov., Heliomarina baculiformis gen. nov., sp. nov. and Oricola indica sp. nov., three novel Alphaproteobacteria members isolated from deep-sea water in the southwest Indian ridge.

Three Gram-staining-negative, aerobic and rod-shaped strains, designated as T40-1T, T40-3T and JL-62T, were isolated from the deep-sea water in the southwest Indian ridge. For strain T40-1T, growth occurred at 15-37 °C (optimum, 28 °C), pH 6.0-9.0 (optimum, pH 7.5) and in the presence of 0.5-5.0 % NaCl (w/v; optimum, 2.0 %). Strain T40-3T could grow at 15-40 °C (optimum, 28 °C), with 0.5-11.0 % NaCl (optimum, 2.0 %, w/v) at pH 6.0-9.5 (optimum, 8.0). The temperature, pH and salinity ranges for growth of strain JL-62T were 15-40 °C (optimum, 30 °C), pH 5.5-9.0 (optimum, pH 7.5-8.0) and 0.5-9.0 % NaCl (w/v; optimum, 4.0 %). Ubiquinone-10 was the sole ubiquinone in all strains, the major fatty acids (>20 %) were summed feature 8 (C18 : 1 ω7c / C18 : 1 ω6c). The major polar lipids of strains T40-1T and T40-3T were phosphatidylcholine, phosphatidylglycerol, phosphatidylethanolamine and diphosphatidylglycerol. Strain JL-62T contained phosphatidylmonomethylethanolamine, diphosphatidylglycerol, phosphatidylethanolamine, phosphatidylglycerol and sulfoquinovosyldiacylglycerol as major polar lipids. Phylogenetic trees based on 16S rRNA gene and core-genomic sequences revealed affiliation of strains T40-1Tand T40-3T to the family Roseobacteraceae and formed two independent clades from other Roseobacteraceae genera, and those two strains had average nucleotide identities of 62.0-72.0 % to their phylogenetically related species which fell into to the genus boundary range, indicating that they represent two novel genera. While strain JL-62T represents a novel species in the genus Oricola belonging to the family Phyllobacteriaceae, which was supported by overall genomic relatedness index calculations. The DNA G+C contents of strains T40-1T, T40-3T and JL-62T were 66.5, 60.1 and 62.1 mol %, respectively. Based on the polyphasic taxonomic data, strains T40-1T (=MCCC M24557T=KCTC 82975T) and T40-3T (=MCCC 1K05135T=KCTC 82976T) are classified as representing two novel genera belonging to the family Roseobacteraceae with the names Mesobacterium pallidum gen. nov., sp. nov. and Heliomarina baculiformis gen. nov., sp. nov. are proposed, and strain JL-62T (=MCCC M24579T=KCTC 82974T) is proposed to represent a novel species within the genus Oricola with the name Oricola indica sp. nov. is proposed.

Luteirhabdus pelagi gen. nov., sp. nov., a novel member of the family Flavobacteriaceae, isolated from the West Pacific Ocean.

A Gram-stain-negative, aerobic, and yellow-pigmented bacterium, designated A3-108T, was isolated from seawater of the West Pacific Ocean. Cells were non-motile and rod-shaped, with carotenoid-type pigments. Strain A3-108T grew at pH 6.0-8.5 (optimum 6.5) and 15-40 °C (optimum 28 °C), in the presence of 0.5-10% (w/v) NaCl (optimum 1.0%). It possessed the ability to produce H2S. Based on the 16S rRNA gene analysis, strain A3-108T exhibited highest similarity with Aureisphaera salina A6D-50T (90.6%). Phylogenetic analysis shown that strain A3-108T affiliated with members of the family Flavobacteriaceae and represented an independent lineage. The principal fatty acids were iso-C15:0, iso-C17:0 3-OH, iso-C15:1 G, and summed feature 3 (C16:1ω7c and/or C16:1ω6c). The sole isoprenoid quinone was MK-6. The major polar lipids were phosphatidylethanolamine, one unidentified aminophospholipid, one unidentified aminolipid and one unidentified lipid. The ANIb, in silico DDH and AAI values among the genomes of strain A3-108T and three reference strains were 67.3-71.1%, 18.7-22.1%, and 58.8-71.4%, respectively. The G + C content was 41.0%. Distinctness of the phylogenetic position as well as differentiating chemotaxonomic and other phenotypic traits revealed that strain A3-108T represented a novel genus and species of the family Flavobacteriaceae, for which the name Luteirhabdus pelagi gen. nov., sp. nov. is proposed (type strain, A3-108T = CGMCC 1.18821T = KCTC 82563T).

Muriiphilus fusiformis gen. nov., sp. nov., a novel non-marine bacterium belonging to the Roseobacter group, and reclassification of Maritimibacter lacisalsi (Zhong et al. 2015) as Muriicola lacisalsi gen. nov., comb. nov.

An aerobic, Gram-stain-negative, non-sporulating, flagellated and spindle-like bacterium, designated HY14T, was isolated from a pickle-processing factory wastewater sample. The isolate chemoheterotrophically grew at 4-42 °C (optimum, 35 °C) and pH 5.5-9.0 (optimum, pH 6.0-6.5). Salt was required for growth (0.5-12 % NaCl, w/v). A deep brown and water-soluble uncharacterized pigment was produced when grown in certain media. The predominant fatty acids (>5 %) included C16 : 0, C18 : 1 ω7c, 11-methyl C18 : 1 ω7c and C19 : 0 cyclo ω8c. The polar lipid profile consisted of diphosphatidylglycerol, phosphatidylglycerol, phosphatidylcholine, two unidentified aminolipids, two unidentified phospholipids, two unidentified glycolipids and five unknown lipids. The major isoprenoid quinone was ubiquinone-10. Pairwise alignment based on 16S rRNA gene sequences indicated that strain HY14T had the highest sequence similarity to genera Maritimibacter (95.61-96.05 %) and Boseongicola (95.82 %). Phylogenetic analysis based on core genome illustrated that strain HY14T formed a monophyletic lineage with members of the genus Maritimibacter in the clade of the Roseobacter group in the family Rhodobacteraeceae. The core-gene average amino acid identity used to define bacterial genera by a threshold of 60-80 % was calculated to be 68.56-76.5 % between HY14T and closely related taxa. Several genomic characteristics, such as carrying two RuBisCO-mediated pathways and different osmoprotectant transport pathways, exhibited the genotypic discrepancies of strain HY14T. Based on the polyphasic taxonomic characterization, strain HY14T is considered to represent a novel species of a novel genus belonging to the family Rhodobacteraeceae, for which the name Muriiphilus fusiformis gen. nov., sp. nov. is proposed. The type strain is HY14T (=CGMCC 1.15973T=KCTC 52499T). Maritimibacter lacisalsi (Zhong et al. 2015) is considered to diverge from Maritimibacter alkaliphilus at the genus level, and should be reassigned as a novel genus, for which the name Muriicola lacisalsi gen. nov., comb. nov. is proposed.

Physiological and genomic features of Henriciella with the description of Henriciella mobilis sp. nov.

Strains M65T, M69 and JN25 were isolated from seawater of the West Pacific Ocean. Cells of the three strains were Gram-stain-negative, aerobic and rod-shaped. Cells were motile by means of flagella. On the basis of the results of 16S rRNA gene sequence analysis, strains M65T, M69 and JN25 showed the highest 16S rRNA gene sequence similarity to Henriciella algicola MCS27T (98.8 %), followed by Henriciella marina DSM 19595T (98.4 %), Henriciella barbarensis MCS23T (98.4 %), Henriciella pelagia LA220T (98.3 %), Henriciella aquimarina P38T (98.1 %) and Henriciella litoralis SD10T (97.8 %). The 16S rRNA gene sequence similarities among the isolates were 100 %. Phylogenetic analyses revealed that the isolates fell within a cluster comprising the Henriciella species and represented an independent lineage. The average nucleotide identity and in silico DNA-DNA hybridization values between strain M65T and the type strains of Henriciella species were 73.9-85.8 % and 19.9-22.4 %, respectively. The sole respiratory quinone detected in the three isolates was ubiquinone 10. The principal fatty acids were summed feature 8 (C18 : 1 ω7c and/or C18 : 1 ω6c) and C16 : 0. The major polar lipids were glucuronopyranosyldiglyceride, monoglycosyldiglyceride and one unidentified glycolipid. The DNA G+C content was 61.3-61.4 mol%. Phylogenetic distinctiveness, chemotaxonomic differences, together with phenotypic properties, revealed that the isolates could be differentiated from the Henriciella species with validly published names. Therefore, it is proposed that strains M65T, M69 and JN25 represent a novel species of the genus Henriciella, for which the name Henriciella mobilis sp. nov. (type strain, M65T=CGMCC 1.15927T=KCTC 52576T) is proposed.

Dosimetric comparison of coplanar and noncoplanar beam arrangements for radiotherapy of patients with lung cancer: A meta-analysis.

PURPOSE: Radiotherapy plays an important role in the treatment of lung cancer, and both coplanar beam arrangements (CBA) and noncoplanar beam arrangements (NCBA) are adopted in clinic practice. The aim of this study is to answer the question whether NCBA are dosimetrically superior to CBA. METHODS: Search of publications were performed in PubMed, Web of Science, and the Cochran Library till March 2020. The searching terms were as following: ((noncoplanar) or ("non coplanar") or ("4pi") or ("4π")) AND (("lung cancer") or ("lung tumor") or ("lung carcinoma")) AND ((radiotherapy) or ("radiation therapy")). The included studies and extracted data were manually screened. All forest and funnel plots were carried out with RevMan software, and the Egger's regression asymmetry tests were conducted with STATA software. RESULTS: Nine studies were included and evaluated in the meta-analysis and treatment plans were designed with both CBA and NCBA. For the planning target volumes (PTV), D98%, D2%, the conformity index (CI), and the gradient index (GI) had no statistically significant difference. For organs-at-risk (OAR), V20 of the whole lung and the maximum dose of the spinal cord were significantly reduced in NCBA plans compared with CBA ones. But V10, V5, and mean dose of the whole lung, the maximum dose of the heart, and the maximum dose of the esophagus exhibited no significant difference when the two types of beam arrangements were compared. CONCLUSION: After combining multicenter results, NCBA plans have significant advantages in reducing V20 of the whole lung and max dose of spinal cord.

A longitudinal evaluation of improvements in treatment plan quality for lung cancer with volumetric modulated arc therapy.

PURPOSE: To investigate planning time and number of optimizations in routine clinical lung cancer plans based on the plan quality improvements following each optimization. MATERIALS AND METHOD: We selected 40 patients with lung cancer who were treated with conventional fractionated radiotherapy (CFRT). The 40 plans (divided into two groups with one or two target volumes) were completed by 9 planners using volumetric modulated arc therapy (VMAT). A planning strategy, including technique script for each group and a planning process for data collection, was introduced. The total planning time, number of optimizations, and dose-volume parameters of each plan were recorded and analyzed. A plan quality metric (PQM) was defined according to the clinical constraints. Statistical analysis of parameters of each plan following each optimization was performed for evaluating improvements in plan quality. RESULTS: According to the clinical plans generated by different planners, the median number of optimizations of each group was 4, and the median planning time was approximately 1 h (68.6 min and 62.0 min for plans with one or two target volumes, respectively). The dose deposited in organs at risk (OARs) gradually decreased, and the PQM values gradually improved following each optimization. The improvements were significant only between adjacent optimizations from the first optimization (Opt1) to the third optimization (Opt3). CONCLUSION: Increasing the number of optimizations was associated with significantly improved sparing of OARs with slight effects on the dose coverage and homogeneity of target volume. Generally, based on the designed planning strategy, there was no significant improvement of the plan quality for more than three optimizations.

Toxicity of GO to Freshwater Algae in the Presence of Al2O3 Particles with Different Morphologies: Importance of Heteroaggregation.

The roles of Al2O3 particles with different morphologies in altering graphene oxide (GO) toxicity to Chlorella pyrenoidosa were investigated. Algal growth inhibition by GO with coexisting Al2O3 particles was much lower than the sum of inhibitions from the individual materials for all the three Al2O3, showing the toxicity mitigation by Al2O3. The lowest GO toxicity was observed at the concentrations of 300, 150, and 100 mg/L for Al2O3 nanoparticles (NPs, 8-10 nm), bulk particles (BPs, 100-300 nm), and fibers (diameter: 10 nm; length: 400 nm), respectively. GO-Al2O3 heteroaggregation was responsible for the observed toxicity reduction. GO-induced algal membrane damage was suppressed by the three types of Al2O3 due to GO-Al2O3 heteroaggregation, and the reduction in intracellular reactive oxygen species generation and physical contact were confirmed as two main mechanisms. Moreover, the exposure sequence of GO and Al2O3 could highly influence the toxicity, and the simultaneous exposure of individual GO and Al2O3 showed the lowest toxicity due to minimum direct contact with algal cells. Humic acid further decreased GO-Al2O3 toxicity due to enhanced steric hindrance through surface coating of GO-Al2O3 heteroaggregates. This work provides new insights into the role of natural mineral particles in altering the environmental risk of GO.

Uptake, Distribution, and Transformation of CuO NPs in a Floating Plant Eichhornia crassipes and Related Stomatal Responses.

Engineered nanoparticles (NPs) are being released into aquatic environments with their increasing applications. In this work, we investigated the interaction of CuO NPs with a floating plant, water hyacinth (Eichhornia crassipes). CuO NPs (50 mg/L) showed significant growth inhibition on both roots and shoots of E. crassipes after 8-day exposure, much higher than that of the bulk CuO particles (50 mg/L) and their corresponding dissolved Cu2+ ions (0.30 mg/L). Scanning electron and light microscopic observations showed that the root caps and meristematic zone of E. Crassipes were severely damaged after CuO NP exposure, with disordered cell arrangement and a destroyed elongation zone of root tips. It is confirmed that CuO NPs could be translocated to shoot from both roots and submerged leaves. As detected by X-ray absorption near-edge spectroscopy analysis (XANES), CuO NPs were observed in roots, submerged leaves, and emerged leaves. Cu2S and other Cu species were also detected in these tissues, providing solid evidence of the transformation of CuO NPs. In addition, stomatal closure was observed during CuO NPs-leaf contact, which was induced by the production of H2O2 and increased Ca level in leaf guard cells. These findings are helpful for better understanding the fate of NPs in aquatic plants and related biological responses.

Reducing dose to the lungs through loosing target dose homogeneity requirement for radiotherapy of non small cell lung cancer.

It is important to minimize lung dose during intensity-modulated radiation therapy (IMRT) of nonsmall cell lung cancer (NSCLC). In this study, an approach was proposed to reduce lung dose by relaxing the constraint of target dose homogeneity during treatment planning of IMRT. Ten NSCLC patients with lung tumor on the right side were selected. The total dose for planning target volume (PTV) was 60 Gy (2 Gy/fraction). For each patient, two IMRT plans with six beams were created in Pinnacle treatment planning system. The dose homogeneity of target was controlled by constraints on the maximum and uniform doses of target volume. One IMRT plan was made with homogeneous target dose (the resulting target dose was within 95%-107% of the prescribed dose), while another IMRT plan was made with inhomogeneous target dose (the resulting target dose was more than 95% of the prescribed dose). During plan optimization, the dose of cord and heart in two types of IMRT plans were kept nearly the same. The doses of lungs, PTV and organs at risk (OARs) between two types of IMRT plans were compared and analyzed quantitatively. For all patients, the lung dose was decreased in the IMRT plans with inhomogeneous target dose. On average, the mean dose, V5, V20, and V30 of lung were reduced by 1.4 Gy, 4.8%, 3.7%, and 1.7%, respectively, and the dose to normal tissue was also reduced. These reductions in DVH values were all statistically significant (P < 0.05). There were no significant differences between the two IMRT plans on V25, V30, V40, V50 and mean dose for heart. The maximum doses of cords in two type IMRT plans were nearly the same. IMRT plans with inhomogeneous target dose could protect lungs better and may be considered as a choice for treating NSCLC.

Dosimetric comparison of intensity-modulated radiotherapy and volumetric-modulated arc radiotherapy in patients with prostate cancer: a meta-analysis.

Intensity-modulated radiotherapy (IMRT) and volumetric-modulated arc therapy (VMAT) are two main radiotherapy techniques. The aim of this study is to explore which is the preferred technique in prostate treatment through the related publica-tions and meta-analysis. Two authors independently identified all relevant articles available regarding eligibility criteria on PubMed, Embase, and Cochrane Library databases until December 2015. Publication bias was evaluated with funnel plot, and statistical analyses were performed with Stata software. P < 0.05 was thought statistically significant. Ten studies comprised a total of 110 patients; in total 110 IMRT plans and 110 VMAT plans that were included in this study. V40, V60, and V70 of rectum were significantly decreased in VMAT than in IMRT. However, V50 of rectum and V40, V50, V60, V70 of bladder had no statistical differences between IMRI and VMAT plans. Compared with IMRT, the treatment time and MUs of VMAT were significantly lower. VMAT protects rectum better than IMRT and improves the delivery efficiency. VMAT may be the preferred modality for treating prostate cancer.

Revealing spatial distribution and accessibility of cell wall polymers in bamboo through chemical imaging and mild chemical treatments.

Understanding the distribution and accessibility of polymers within plant cell walls is crucial for addressing biomass recalcitrance in lignocellulosic materials. In this work, Imaging Fourier Transform Infrared (FTIR) and Raman spectroscopy, coupled with targeted chemical treatments, were employed to investigate cell wall polymer distribution in two bamboo species at both tissue and cell wall levels. Tissue-level Imaging FTIR revealed significant disparities in the distribution and chemical activity of cell wall polymers between the fibrous sheath and fibrous strand. At the cell wall level, Imaging Raman spectroscopy delineated a distinct difference between the secondary wall and intercellular layer, with the latter containing higher levels of lignin, hydroxycinnamic acid (HCA), and xylan, and lower cellulose. Mild acidified sodium chlorite treatment led to partial removal of lignin, HCA, and xylan from the intercellular layer, albeit to a lesser extent than alkaline treatment, indicating susceptibility of these polymers to chemical treatment. In contrast, lignin in the secondary wall exhibited limited reactivity to acidified sodium chlorite but was slightly removed by alkaline treatment, suggesting stable chemical properties with slight alkaline intolerance. These findings provide valuable insights into the inherent design mechanism of plant cells and their efficient utilization.

Structural elucidation of lignin, hemicelluloses and LCC from both bamboo fibers and parenchyma cells.

Biomass recalcitrance, a key challenge in biomass utilization, is closely linked to the architectural composition and cross-linkages of molecules within cell walls. With three bamboo species investigated, this study aims to elucidate the inherent molecular-scale structural differences between bamboo fibers and parenchyma cells through a systematic chemical extraction and structural characterization of isolated hemicelluloses, lignin, and lignin-carbohydrate complexes (LCC). We observed that parenchyma cells exhibit superior alkaline extractability compared to fibers. Additionally, we identified the hemicelluloses in parenchyma cells as L-arabino-4-O-methyl-D-glucurono-D-xylan, displaying a highly branched structure, while that in fibers is L-arabino-D-xylan. Furthermore, the parenchyma cell lignin exhibited a higher syringyl-to-guaiacyl (S/G) ratio and ß-O-4 linkage content compared to fibers, whereas fibers contain more carbon­carbon linkages including ß-ß, ß-5, and ß-1. This notable structural difference suggests a denser and more stable lignin in bamboo fibers. Importantly, we found that LCC in parenchyma cells predominantly comprises γ-ester linkages, which exhibit an alkaline-unstable nature. In contrast, fibers predominantly contain phenyl glycoside linkages, characterized by their alkaline-stable nature. These findings were observed for all the tested bamboo species, indicating the conclusions should be also valid for other bamboo species, suggesting the competitiveness of bamboo parenchyma cells as a valuable biofuel feedstock.

Conversion of Bamboo into Strong, Waterproof, and Biodegradable Thermosetting Plastic through Cell Wall Structure Directed Manipulation.

Reckoning with the global environmental challenge of plastic pollution, particularly in terms of recycling and biodegradation of thermosetting plastics, sustainable alternatives are imperative. The rapidly growing and eco-friendly material bamboo has great potential as a sustainable resource; however, it lacks the inherent self-bonding and plasticity characteristics found in plastics. This study presents a feasible approach to enhance the plasticity of bamboo by selectively removing part of its lignin and disrupting the crystalline structure of cellulose. Concurrently, this process selectively transforms hydroxyl groups into highly reactive dialdehyde groups to increase the reactivity of bamboo. The resulting activated bamboo units undergo a hot-pressing process to transform them into a type of thermosetting plastic (ABTP). The ABTP is highly moldable, and its color can be precisely regulated by adjusting the lignin content. Additionally, it exhibits exceptional solvent and water resistance, along with notable mechanical properties, including a tensile strength of 50 MPa, flexural strength of 80 MPa, flexural modulus of 5 GPa, and Shore D hardness approaching 90. Furthermore, the bamboo-derived plastic exhibits exceptional reusability and biodegradability, presenting feasible and environmentally friendly alternatives to conventional plastics while harnessing the sustainable development potential of bamboo.

Mapping the Behavioral Signatures of Shank3b Mice in Both Sexes.

Autism spectrum disorders (ASD) are characterized by social and repetitive abnormalities. Although the ASD mouse model with Shank3b mutations is widely used in ASD research, the behavioral phenotype of this model has not been fully elucidated. Here, a 3D-motion capture system and linear discriminant analysis were used to comprehensively record and analyze the behavioral patterns of male and female Shank3b mutant mice. It was found that both sexes replicated the core and accompanied symptoms of ASD, with significant sex differences. Further, Shank3b heterozygous knockout mice exhibited distinct autistic behaviors, that were significantly different from those those observed in the wild type and homozygous knockout groups. Our findings provide evidence for the inclusion of both sexes and experimental approaches to efficiently characterize heterozygous transgenic models, which are more clinically relevant in autistic studies.