RESUMEN
Today, nanophotonics still lacks components for modulation that can be easily implementable in existing silicon-on-insulator (SOI) technology. Chalcogenide phase change materials (PCMs) are promising candidates for tuning in the near infrared: at the nanoscale, thin layers can provide enough contrast to control the optical response of a nanostructure. Moreover, all-dielectric metamaterials allow for resonant behavior without having ohmic losses in the telecom range. Here, a novel hybridization of a SOI-based metamaterial with PCM GeTe is experimentally investigated. A metamaterial based on Si nanorods, covered by a thin layer of GeTe, is designed and fabricated. Switching GeTe from amorphous to crystalline leads to a rather high resonance-governed reflection contrast at 1.55 µm. Additional confocal Raman imaging is done to differentiate the crystallized zones of the metamaterials' unit cell. The findings are in good agreement with numerical analysis and show good perspectives of all-dielectric tunable near-infrared nanophotonics.
RESUMEN
Evolution shows that photonic structures are a constituent part of many animals and flora. These elements produce structural color and are useful in predator-prey interactions between animals and in the exploitation of light for photosynthetic organisms. In particular, diatoms have evolved patterned hydrated silica external valves able to confine light with extraordinary efficiency. Their evolution was probably guided by the necessity to survive in harsh conditions of sunlight deprivation. Here, we exploit such diatom valves, in conjunction with structured illumination, to realize a biological super-resolving lens to achieve sub-diffractive focusing in the far field. More precisely, we consider a single diatom valve of Arachnoidiscus genus which shows symmetries and fine features. By characterizing and using the transmission properties of this valve using the optical eigenmode technique, we are able to confine light to a tiny spot with unprecedented precision in terms of resolution limit ratio, corresponding in this case to 0.21λ/NA.
Asunto(s)
Diatomeas/fisiología , Fenómenos Ópticos , Animales , Simulación por Computador , Diatomeas/ultraestructura , Lentes , Análisis Numérico Asistido por ComputadorRESUMEN
Design, fabrication, and characterization of an asymmetric metal-semiconductor-metal photodetector, based on internal photoemission effect and integrated into a silicon-on-insulator waveguide, are reported. For this photodetector, a responsivity of 4.5 mA/W has been measured at 1550 nm, making it suitable for power monitoring applications. Because the absorbing metal is deposited strictly around the vertical output facet of the waveguide, a very small contact area of about 3 µm2 is obtained and a transit-time-limited bandwidth of about 1 GHz is demonstrated. Taking advantage of this small area and electrode asymmetry, a significant reduction in the dark current (2.2 nA at -21 V) is achieved. Interestingly, applying reverse voltage, the photodetector is able to tune its cut-off wavelength, extending its range of application into the MID infrared regime.
RESUMEN
The characterization of partially coherent light transmission by micrometer sized valves of marine diatoms is an interesting optical challenge and, from the biological point of view, is of outmost relevance in order to understand evolution mechanisms of such organisms. In the present work, we have studied the transmission of light coming from a monochromator through single valves of Coscinodiscus wailesii diatoms. Incoming light is confined by the regular pore pattern of the diatom surface into a spot of few microns, its dimensions depending on wavelength. The effect is ascribed to the superposition of wavefronts diffracted by the pores' edges. Numerical simulations help to demonstrate how this effect is not present in the ultraviolet region of the light spectrum, showing one of the possible evolutionary advantages represented by the regular pores patterns of the valves.
Asunto(s)
Diatomeas/efectos de la radiación , Luz , Agua de Mar , Simulación por Computador , Diatomeas/ultraestructura , Modelos MolecularesRESUMEN
A crystalline silicon surface can be made biocompatible and chemically stable by a self-assembled biofilm of proteins, the hydrophobins (HFBs) purified from the fungus Pleurotus ostreatus. The protein-modified silicon surface shows an improvement in wettability and is suitable for immobilization of other proteins. Two different proteins were successfully immobilized on the HFBs-coated chips: the bovine serum albumin and an enzyme, a laccase, which retains its catalytic activity even when bound on the chip. Variable-angle spectroscopic ellipsometry (VASE), water contact angle (WCA), and fluorescence measurements demonstrated that the proposed approach in silicon surface bioactivation is a feasible strategy for the fabrication of a new class of hybrid devices.
Asunto(s)
Proteínas Fúngicas/química , Pleurotus/metabolismo , Silicio/química , Biocatálisis , Biopelículas , Interacciones Hidrofóbicas e Hidrofílicas , Lacasa/metabolismo , Refractometría/métodos , Albúmina Sérica Bovina/metabolismo , Tensión Superficial , Agua/química , HumectabilidadRESUMEN
Light passing through a photonic crystal can undergo a negative or a positive refraction. The two refraction states can be functions of the contrast index, the incident angle and the slab thickness. By suitably using these properties it is possible to realize very simple and very efficient optical components to route the light. As an example we present a passive device acting as a polarizing beam splitter where TM polarization is refracted in positive direction whereas TE component is negatively refracted.
RESUMEN
The flow focusing is a fundamental prior step in order to sort, analyze, and detect particles or cells. The standard hydrodynamic approach requires two fluids to be injected into the microfluidic device: one containing the sample and the other one, called the sheath fluid, allows squeezing the sample fluid into a narrow stream. The major drawback of this approach is the high complexity of the layout for microfluidic devices when parallel streams are required. In this work, we present a novel parallelized microfluidic device that enables hydrodynamic focusing in each microchannel using a single feed flow. At each of the parallel channels, a cross-filter region is present that allows removing fluid from the sample fluid. This fluid is used to create local sheath fluids that hydrodynamically pinch the sample fluid. The great advantage of the proposed device is that, since only one inlet is needed, multiple parallel micro-channels can be easily introduced into the design. In the paper, the design method is described and the numerical simulations performed to define the optimal design are summarized. Moreover, the operational functionality of devices tested by using both polystyrene beads and Acute Lymphoid Leukemia cells are shown.
RESUMEN
Inspired by the concept of complementary media, we experimentally demonstrate that an engineered metamaterial made of alternating, stripe layers of negatively refracting (photonic crystals) and positively refracting (air) materials strongly collimates a beam of near-infrared light. This quasi-zero-average-index metamaterial fully preserves the beam spot size throughout the sample for a light beam traveling through the metamaterial a distance of 2 mm-more than 1000 times the input wavelength lambda=1.55 microm. These results demonstrate the first explicit experimental verification of optical antimatter as proposed by Pendry and Ramakrishna [J. Pendry and S. Ramakrishna, J. Phys. Condens. Matter 15, 6345 (2003)10.1088/0953-8984/15/37/004], using two complementary media in which each n(eff)=-1 layer appears to annihilate an equal thickness layer of air.
RESUMEN
The operation at 1.5 microm of a silicon Fabry-Perot optical modulator is reported. The electrically driven device, which uses the thermo-optic effect to achieve as much as a 55% intensity modulation depth, has been realized by means of standard silicon microelectronic technology. This demonstrates that this new type of optical modulator can easily be integrated with electronic circuits. An accurate three-dimensional thermal analysis of the device has permitted the setup of a reliable numerical code aimed at the design of optimized integrated versions of it. The simulation outputs therefore predict operation frequencies of hundreds of kilohertz, remarkably superior to those previously reported in thermo-optic-effect-based modulators.
RESUMEN
A detailed analysis of tapered and inhomogeneous dielectric light collectors was worked out for both illumination and solar energy applications. In particular, tapered dielectric guides have been investigated both theoretically and experimentally together with their capability to collect and transmit high fluxes of light energy. Furthermore, GRIN rods are considered as matching devices, to improve the collecting performance of tapered guides.
RESUMEN
We describe a simple technique for measuring high (up to 0.16) time-averaged solids volumetric concentration in a two-phase flow. The technique is based on a properly modified version of the forward scattering of laser light. It is useful in a variety of practical configurations, and, in particular, it is instrumental in the diagnostics of particle flow in the free board of bubbling fluidized beds and in the circulating fluidized beds. A fallout of this work is the measurement of the extinction coefficient of the solid material tested.
RESUMEN
A new amorphous silicon waveguide is realized by use of amorphous silicon carbon as cladding material. The structure is characterized both experimentally and theoretically, and its application for optical interconnections in photonic integrated circuits on silicon motherboards is proposed. The fabrication process is based on low-temperature (220 degrees C) plasma-enhanced chemical-vapor deposition and is compatible with standard microelectronic processes. Propagation losses of 1.8 dB/cm have been measured at the fiber-optic wavelength of 1.3 microm. A strong thermo-optic coefficient has been measured in this material at this wavelength and exploited for the realization of a light-intensity modulator based on a Fabry-Perot interferometer that is tunable by temperature.