γ-Amino Alcohols via Energy Transfer Enabled Brook Rearrangement.

In the long-standing quest to synthesize fundamental building blocks with key functional group motifs, photochemistry in the recent past has comprehensively established its attractiveness. Amino alcohols are not only functionally diverse but are ubiquitous in the biologically active realm of compounds. We developed bench-stable bifunctional reagents that could then access the sparsely reported γ-amino alcohols directly from feedstock alkenes through energy transfer (EnT) photocatalysis. A designed 1,3-linkage across alkenes is made possible by the intervention of a radical Brook rearrangement that takes place downstream to the EnT-mediated homolysis of our reagent(s). A combination of experimental mechanistic investigations and detailed computational studies (DFT) indicates a radical chain propagated reaction pathway.

Molecular Ball Joints: Mechanochemical Perturbation of Bullvalene Hardy-Cope Rearrangements in Polymer Networks.

The solution-state fluxional behavior of bullvalene has fascinated physical organic and supramolecular chemists alike. Little effort, however, has been put into investigating bullvalene applications in bulk, partially due to difficulties in characterizing such dynamic systems. To address this knowledge gap, we herein probe whether bullvalene Hardy-Cope rearrangements can be mechanically perturbed in bulk polymer networks. We use dynamic mechanical analysis to demonstrate that the activation barrier to the glass transition process is significantly elevated for bullvalene-containing materials relative to "static" control networks. Furthermore, bullvalene rearrangements can be mechanically perturbed at low temperatures in the glassy region; such behavior facilitates energy dissipation (i.e., increased hysteresis energy) and polymer chain alignment to stiffen the material (i.e., increased Young's modulus) under load. Computational simulations corroborate our work that showcases bullvalene as a reversible "low-force" covalent mechanophore in the modulation of viscoelastic behavior.

Ultrasound-assisted diastereoselective green synthesis of spiro-fused-γ-lactams functionalized with an amide bond heterocyclic bioisostere via the Ugi azide/domino process coupled strategy.

A series of linked-type 1,5-disubstituted tetrazoles (1,5-DS-Ts) were synthesised via an isocyanide-based multicomponent reaction (IMCR) and used as synthetic platforms to access bound-type polyheterocycles containing an epoxyisoindol-1(6H)-one scaffold under green conditions. This rapid sonochemical synthetic strategy includes a double domino process using an orthogonal heterocyclic input in the Ugi-azide (UA) reaction. DFT calculations and NBO analysis were performed to understand the pseudopericyclic reaction involved in the 1,5-electrocyclization of the UA mechanism.

Selective 1,2-Hydroarylation(Alkenylation) of gem-Difluoroalkenes to Access (-CF2 H) Motifs.

An emerging class of C-C coupling transformations that furnish drug-like building blocks involves catalytic hydrocarbonation of alkenes. However, despite notable advances in the field, hydrocarbon addition to gem-difluoroalkenes without additional electronic activation remains largely unsuccessful. This owes partly to poor reactivity and the propensity of difluoroalkenes to undergo defluorinative side reactions. Here, we report a nickel catalytic system that promotes efficient 1,2-selective hydroarylation and hydroalkenylation, suppressing defluorination and providing straightforward access to a diverse assortment of prized organofluorides bearing difluoromethyl-substituted carbon centers. In contrast to radical-based pathways and reactions triggered by hydrometallation via a nickel-hydride complex, our experimental and computational studies support a mechanism in which a catalytically active nickel-bromide species promotes selective carbonickelation with difluoroalkenes followed by alkoxide exchange and hydride transfer, effectively overcoming the difluoroalkene's intrinsic electronic bias.

Photoinduced Acylations Via Azolium-Promoted Intermolecular Hydrogen Atom Transfer.

Photoinduced hydrogen atom transfer (HAT) has been developed as a powerful tool to generate synthetically valuable radical species. The direct photoexcitation of ketones has been known to promote HAT or to generate acyl radicals through Norrish-type pathways, but these modalities remain severely limited by radical side reactions. We report herein a catalyst- and transition metal-free method for the acylation of C-H bonds that leverages the unique properties of stable, isolable acyl azolium species. Specifically, acyl azolium salts are shown to undergo an intermolecular and regioselective HAT upon LED irradiation with a range of substrates bearing active C-H bonds followed by C-C bond formation to afford ketones. Experimental and computational studies support photoexcitation of the acyl azolium followed by facile intersystem crossing to access triplet diradical species that promote selective HAT and radical-radical cross-coupling.

Experimental and Computational Studies on Cobalt(I)-Catalyzed Regioselective Allylic Alkylation Reactions.

Here, we report the development of cobalt(I)-catalyzed regioselective allylic alkylation reactions of tertiary allyl carbonates with 1,3-dicarbonyl compounds. A family of well-defined tetrahedral cobalt(I) complexes bearing commercially available bidentate bis(phosphine) ligands [(P,P)Co(PPh3 )Cl] are synthesized and explored as catalysts in allylic alkylation reactions. The catalyst [(dppp)Co(PPh3 )Cl] (dppp=1,3-Bis(diphenylphosphino)propane) enables the alkylation of a large variety of tertiary allyl carbonates with high yields and excellent regioselectivity for the branched product. Remarkably, this methodology is selective for the activation of tertiary allyl carbonates even in the presence of secondary allyl carbonates. This contrasts with the selectivity observed in cobalt-catalyzed allylic alkylations enabled by visible light photocatalysis. Mechanistic insights by means of experimental and computational investigations support a Co(I)/Co(III) catalytic cycle.

Highly Selective Radical Relay 1,4-Oxyimination of Two Electronically Differentiated Olefins.

Radical addition reactions of olefins have emerged as an attractive tool for the rapid assembly of complex structures, and have plentiful applications in organic synthesis, however, such reactions are often limited to polymerization or 1,2-difunctionalization. Herein, we disclose an unprecedented radical relay 1,4-oxyimination of two electronically differentiated olefins with a class of bifunctional oxime carbonate reagents via an energy transfer strategy. The protocol is highly chemo- and regioselective, and three different chemical bonds (C-O, C-C, and C-N bonds) were formed in a single operation in an orchestrated manner. Notably, this reaction provides rapid access to a large variety of structurally diverse 1,4-oxyimination products, and the obtained products could be easily converted into valuable biologically relevant δ-hydroxyl-α-amino acids. With a combination of experimental and theoretical methods, the mechanism for this 1,4-oxyimination reaction has been investigated. Theoretical calculations reveal that a radical chain mechanism might operate in the reaction.

Metal-Free Photochemical Imino-Alkylation of Alkenes with Bifunctional Oxime Esters.

The concurrent installation of C-C and C-N bonds across alkene frameworks represents a powerful tool to prepare motifs that are ubiquitous in pharmaceuticals and bioactive compounds. To construct such prevalent bonds, most alkene difunctionalization methods demand the use of precious metals or activated alkenes. We report a metal-free, photochemically mediated imino-alkylation of electronically diverse alkenes to install both alkyl and iminyl groups in a highly efficient manner. The exceptionally mild reaction conditions, broad substrate scope, excellent functional group tolerance, and facile one-pot reaction protocol highlight the utility of this method to prepare privileged motifs from readily available alkene and acid feedstocks. One key and striking feature of this transformation is that an electrophilic trifluoromethyl radical is equally efficient with both electron-deficient and electron-rich alkenes. Additionally, dispersion-corrected density functional theory (DFT) and empirical investigations provide detailed mechanistic insight into this reaction.

Integrated Photocatalytic Reduction and Oxidation of Perfluorooctanoic Acid by Metal-Organic Frameworks: Key Insights into the Degradation Mechanisms.

The high porosity and tunability of metal-organic frameworks (MOFs) have made them an appealing group of materials for environmental applications. However, their potential in the photocatalytic degradation of per- and polyfluoroalkyl substances (PFAS) has been rarely investigated. Hereby, we demonstrate that over 98.9% of perfluorooctanoic acid (PFOA) was degraded by MIL-125-NH2, a titanium-based MOF, in 24 h under Hg-lamp irradiation. The MOF maintained its structural integrity and porosity after three cycles, as indicated by its crystal structure, surface area, and pore size distribution. Based on the experimental results and density functional theory (DFT) calculations, a detailed reaction mechanism of the chain-shortening and H/F exchange pathways in hydrated electron (eaq-)-induced PFOA degradation were revealed. Significantly, we proposed that the coordinated contribution of eaq- and hydroxyl radical (•OH) is vital for chain-shortening, highlighting the importance of an integrated system capable of both reduction and oxidation for efficient PFAS degradation in water. Our results shed light on the development of effective and sustainable technologies for PFAS breakdown in the environment.

Synthesis of azepino[4,5-b]indol-4-ones via MCR/free radical cyclization and in vitro-in silico studies as 5-Ht6R ligands.

A series of nine new 3-acetamide-azepino[4,5-b]indol-4-ones were synthesized in two steps: (i) multicomponent reaction (Ugi-4CR/SN2) and (ii) free radical-mediated cyclization. These compounds, along with their tetrazole-based analogs, were studied in vitro to assess their binding with the 5-hydroxytryptamine type 6 receptor (5-Ht6R). The 3-acetamide-azepino[4,5-b]indol-4-ones displayed moderate affinity, whereas the 3-tetrazolylmethyl-azepino[4,5-b]indol-4-ones affinity values are lower. However, one of the 3-acetamide-azepino[4,5-b]indol-4-ones exhibited a hit value of Ki (211.2nM) to the 5-Ht6R. Minimal-energy structures of one cis-amide and its tetrazole-based analog (calculated by means of the Density Functional Theory) were analyzed to assess some interesting bioisosterism aspects. Interactions and binding energies between all products and the 5-Ht6R were calculated through in silico molecular couplings. Finally, a QSAR model was proposed using the results of the in vitro assays.

In vitro and in silico evaluation of twelve newly-synthesized 1-acetamide-5-methoxy-2-oxindoles as 5-Ht7 receptor ligands.

Based on in vitro studies of twelve newly-synthesized 1-acetamide-5-methoxy-2-oxindoles as 5-Ht7 receptor ligands, Structure Affinity Relationship (SAR) and Quantitative Structure Affinity Relationship model (QSAR) are provided. Also, a ligand-based pharmacophore model is proposed through molecular docking techniques and Nucleus Independent Chemical Shift DFT calculations (NICS).

Isocyanide-Based Multicomponent Reactions Coupled One-Pot Process: Efficient Tools to Diversity-Oriented Synthesis of Structural Peptidomimetics.

Multicomponent diversity-oriented synthesis (DOS) of conformationally anchored structural peptidomimetics like 2,5-diketopiperazines (2,5-DKP) containing heterocyclic bioisosteres of the amide bond, such as 1,2,3-triazoles and 1,5-disubstituted tetrazoles (1,5-DS-T) is described. Structural peptidomimetics are synthesized from similar available starting materials, via a strategy based on isocyanide-based multicomponent reactions (IMCRs): Ugi-4CR and Ugi-Azide (UA), followed by a one-pot process: SN2/intramolecular alkyne-azide cycloaddition (IAAC). The sequential aligning of two powerful synthetic tools (IMCR and IAAC) has parallelly contributed to generate anchored conformation and complexity in target molecules, which are considered structural peptidomimetics of 2,5-DKP. Herein, the 1,2,3-triazole ring plays a key role in the preference for the boat conformation. Furthermore, the use of UA reaction generates scaffold diversity at the N-1 α-carbon of the pyrazinone ring, replacing a linear amide bond with a heterocyclic bioisostere such as 1,5-DS-T leading to the synthesis of novel tricyclic peptidomimetics. The DFT calculations confirmed the boat conformation of the synthesized molecules.

Linear and Nonlinear Optical Properties of All-cis and All-trans Poly(p-phenylenevinylene).

Poly(p-phenylenevinylene) (PPV) is a staple of the family of conjugated polymers with desirable optoelectronic properties for applications including light-emitting diodes (LEDs) and photovoltaic devices. Although the significant impact of olefin geometry on the steady-state optical properties of PPVs has been extensively studied, PPVs with precise stereochemistry have yet to be investigated using nonlinear optical spectroscopy for quantum sensing, as well as light harvesting for biological applications. Herein, we report our investigation of the influence of olefin stereochemistry on both linear and nonlinear optical properties through the synthesis of all-cis and all-trans PPV copolymers. We performed two-photon absorption (TPA) using a classical and entangled light source and compared both classical TPA and entangled two-photon absorption (ETPA) cross sections of these stereodefined PPVs. Whereas the TPA cross section of the all-trans PPV was expectedly higher than that of all-cis PPV, presumably because of the larger transition dipole moment, the opposite trend was measured via ETPA, with the all-cis PPV exhibiting the highest ETPA cross section. DFT calculations suggest that this difference might stem from the interaction of entangled photons with lower-lying electronic states in the all-cis PPV variant. Additionally, we explored the photoinduced processes for both cis and trans PPVs through time-resolved fluorescence upconversion and femtosecond transient absorption techniques. This study revealed that the sensitivity of PPVs in two-photon absorption varies with classical versus quantum light and can be modulated through the control of the geometry of the repeating alkenes, which is a key stepping stone toward their use in quantum sensing, bioimaging, and the design of polymer-based light-harvesting systems.

Monodentate Phosphinoamine Nickel Complex Supported on a Metal-Organic Framework for High-Performance Ethylene Dimerization.

Ethylene dimerization is an efficient industrial chemical process to produce 1-butene, with demanding selectivity and activity requirements on new catalytic systems. Herein, a series of monodentate phosphinoamine-nickel complexes immobilized on UiO-66 are described for ethylene dimerization. These catalysts display extensive molecular tunability of the ligand similar to organometallic catalysis, while maintaining the high stability attributed to the metal-organic framework (MOF) scaffold. The highly flexible postsynthetic modification method enables this study to prepare MOFs functionalized with five different substituted phosphines and 3 N-containing ligands and identify the optimal catalyst UiO-66-L5-NiCl2 with isopropyl substituted nickel mono-phosphinoamine complex. This catalyst shows a remarkable activity and selectivity with a TOF of 29 000 (molethyl/molNi/h) and 99% selectivity for 1-butene under ethylene pressure of 15 bar. The catalyst is also applicable for continuous production in the packed column micro-reactor with a TON of 72 000 (molethyl/molNi). The mechanistic insight for the ethylene oligomerization has been examined by density functional theory (DFT) calculations. The calculated energy profiles for homogeneous complexes and truncated MOF models reveal varying rate-determining step as ß-hydrogen elimination and migratory insertion, respectively. The activation barrier of UiO-66-L5-NiCl2 is lower than other systems, possibly due to the restriction effect caused by clusters and ligands. A comprehensive analysis of the structural parameters of catalysts shows that the cone angle as steric descriptor and butene desorption energy as thermodynamic descriptor can be applied to estimate the reactivity turnover frequency (TOF) with the optimum for UiO-66-L5-NiCl2. This work represents the systematic optimization of ligand effect through combination of experimental and theoretical data and presents a proof-of-concept for ethylene dimerization catalyst through simple heterogenization of organometallic catalyst on MOF.

Synthesis of 3-tetrazolylmethyl-azepino[4,5-b]indol-4-ones in two reaction steps: (Ugi-azide/N-acylation/SN2)/free radical cyclization and docking studies to a 5-Ht(6) model.

A series of nine novel 3-tetrazolylmethyl-azepino[4,5-b]indol-4-ones were prepared in moderate to good overall yields in only two reaction steps. The first step consisted of a one-pot sequential process of an Ugi-azide multicomponent reaction, N-acylation and SN2 to give the xanthates. The second step was an intramolecular cyclization under free radical conditions. Also, their binding modes have been modelled using docking techniques.

Regioselective Fluoroalkylarylation of Enamides Enabled by an Iron-Catalyzed Multicomponent Radical Cross-Coupling Strategy.

Fluoroalkylated compounds are important entities in agrochemicals, pharmaceuticals, and materials. The catalytic dicarbofunctionalization of alkenes represents a powerful strategy for the rapid construction and diversification of compounds. In this vein, multicomponent cross-coupling reactions (MC-CCR) can provide an efficient synthetic route to build molecular complexity. In this work, we report the first iron-catalyzed three-component fluoroalkylarylation of enamides via selective formation and trapping of α-amide radicals under mild conditions and fast reaction times. The reaction tolerates a variety of commercially available aryl Grignard reagents and fluoroalkyl halides. Finally, the use of a removable phthalimido group provides an efficient strategy to prepare highly valuable γ-difluoroalkylated amines.

Visible-light-induced coupling of carboxylic acids with alcohols/amines via a phosphorous linchpin strategy.

The combination of activated carboxylic acids and alcohols/amines to access esters and amides, respectively, is a cornerstone of organic chemistry and has been well developed over the past century. These dehydrations are extensively used in medicinal chemistry and natural product synthesis due to the prevalence of these functional groups in bioactive molecules. Here, we report a divergent process from the expected ester/amide outcomes through a light-induced coupling of activated carboxylic acids and alcohols/amines to efficiently prepare α-hydroxy/amino ketones or ß-ketophosphonates via single-electron chemistry. A phosphorus linchpin strategy allows for the combination of these simple reagents through an intramolecular triplet state radical process, thereby enabling new carbon-carbon bond formation.

Expanding the chemical space of enol silyl ethers: catalytic dicarbofunctionalization enabled by iron catalysis.

Enol silyl ethers are versatile, robust, and readily accessible substrates widely used in chemical synthesis. However, the conventional reactivity of these motifs has been limited to classical two electron (2-e) enolate-type chemistry with electrophilic partners or as radical acceptors in one electron (1-e) reactivity leading, in both cases, to exclusive α-monofunctionalization of carbonyls. Herein we describe a mild, fast, and operationally simple one-step protocol that combines readily available fluoroalkyl halides, silyl enol ethers, and, for the first time, hetero(aryl) Grignard reagents to promote selective dicarbofunctionalization of enol silyl ethers. From a broader perspective, this work expands the synthetic utility of enol silyl ethers and establishes bisphosphine-iron catalysis as enabling technology capable of orchestrating selective C-C bond formations with short-lived α-silyloxy radicals with practical implications towards sustainable chemical synthesis.

Iron-Catalyzed Enantioselective Multicomponent Cross-Couplings of α-Boryl Radicals.

Despite recent interest in the development of iron-catalyzed transformations, methods that use iron-based catalysts capable of controlling the enantioselectivity in carbon-carbon cross-couplings are underdeveloped. Herein, we report a practical and simple protocol that uses commercially available and expensive iron salts in combination with chiral bisphosphine ligands to enable the regio- and enantioselective (up to 91:9) multicomponent cross-coupling of vinyl boronates, (fluoro)alkyl halides, and Grignard reagents. Preliminary mechanistic studies are consistent with rapid formation of an α-boryl radical followed by reversible radical addition to monoaryl bisphosphine-Fe(II) and subsequent enantioselective inner-sphere reductive elimination. From a broader perspective, this work provides a blueprint to develop asymmetric Fe-catalyzed multicomponent cross-couplings via the use of alkenes as linchpins to translocate alkyl radicals, modify their steric and electronic properties, and induce stereocontrol.