Analysis of human dentition from Early Bronze Age: 4000-year-old puzzle.

This paper presents the first ever paleodontological investigation of human remains from an archeological site in Central Europe dating from the Early Bronze Age and attributed to the Strzyzow Culture. It corroborates the knowledge gained from archeological, anthropological and genetical investigations. Our study aimed to assess dental status, dental morphology and dental pathologies as well as tooth wear and enamel hypoplasia based on visual inspection and stereomicroscopic investigation. The research was supported by CBCT imaging to obtain digital images and 3D reconstructions as well as 2D radiographs essential for dental age estimation. All of the 191 teeth discovered showed morphological similarity, with adult teeth showing similar color, shape and size. A maxillary molar presenting with a unique root morphology and a mandibular molar with a rare occlusal surface were found. Both permanent and deciduous dentition presented significant tooth wear. A few specimens displayed signs of dental caries, periapical pathology and antemortem tooth loss. Three individuals exhibited linear enamel hypoplasia. CBCT provided high-quality 2D images useful for dental age estimation by non-destructive methods. Estimated dental age correlated with the age estimated by other anthropological methods. In one case, this was crucial because of insufficient material for anthropological analysis. The presented studies have proved that besides the skeleton, teeth can be used as a fundamental tool in assessing the overall health and living conditions of paleopopulations. It would seem that there is potential for considerable development to be made in the research and investigation of paleodontological material using CBCT.

Chronology and social significance of the "princely" barrow cemetery in Leki Male and the Central European Early Bronze Age.

The "princely" barrows of Leki Male, Greater Poland are the oldest such monuments within the distribution area of Únetice societies in Central Europe. While in the Circum-Harz group and in Silesia similar rich furnished graves under mounds have appeared as single monuments as early as 1950 BC, Leki Male represents a chain of barrows constructed between 2150 BC and 1800 BC. Of the original 14 mounds, only four were preserved well enough that their complex biographies can now be reconstructed. They included ritual activities (before, during, and after the funeral), and also subsequent incursions, including robberies. The long lasting barrow cemetery at Leki Male can be linked to a nearby fortified site, Bruszczewo. Together, Leki Male and Bruszczewo represent a stable, socially differentiated society that existed for no less than 350-400 years. Therefore, it can be argued that the Early Bronze Age societies of Greater Poland were extremely sustainable in comparison to those of other Únetice regions.

Sexual dimorphism of maxillary sinuses in children and adolescents - A retrospective CT study.

BACKGROUND: In the postnatal period, some sexual dimorphism is observed from the moment of birth, but it is most pronounced from puberty. The aim of the study based on CT images was to assess possible sexual dimorphism of the maxillary sinus in children aged 0-18. METHODS: The retrospective analysis of CT images of the head (assessed as normal by radiologists) of 170 patients aged 0-18 (85 females and 85 males) was performed. The maxillary sinuses of every patient were bilaterally measured in three planes. Three diameters were obtained: maximum transverse (horizontal) diameter (the maxillary sinus width, MSW); maximum vertical diameter (the maxillary sinus height, MSH) and maximum antero-posterior diameter (maxillary sinus length, MSL). The automatic CT image segmentation algorithm was used (Syngo Via for Oncology, Siemens) to establish maxilla retrospective analysis of CT images of the head (assessed as normal by radiologists) of 170 patients aged 0-18 (85 females and 85 males) was performed. The maxillary sinuses of every patient were bilaterally measured in three planes. Three diameters were obtained: maximum transverse (horizontal) diameter (the maxillary sinus width, MSW); maximum vertical diameter (the maxillary sinus height, MSH) and maximum antero-posterior diameter (maxillary sinus length, MSL). The automatic CT image segmentation algorithm was used (Syngo Via for Oncology, Siemens) to establish maxillary sinus volume (MSV). The coefficient of variation used in the study allowed the biological variation between sexes to be observed. RESULTS AND CONCLUSIONS: The sexual dimorphism of maxillary sinus parameters is variable and depends on the phase of ontogenesis. All investigated parameters of maxillary sinuses are larger in males at 2-3 years (except for the length, which is larger in females by the end of three years, between six and nine years and after 15 years). The sexual dimorphism is less evident during the first year of age, and the most evident between 15 and 16 years. During the first two years, females are dominant with all parameters being larger than in males. The maxillary sinus length is developmentally the most stable parameter of maxillary sinuses, because throughout the investigated ontogenesis, the sexual differences are very similar. The most evident sexual dimorphism is observed in the volume of the maxillary sinus.

Maxillary sinuses and midface in patients with cleidocranial dysostosis.

The cleidocranial dysplasia is general skeletal disorder with an autosomal dominant inheritance. It is manifested by many craniofacial abnormalities, of which the maxillary hypoplasia is the most evident. The aim of the study was to use CBCT to evaluate the volume of the maxillary sinuses and the dimensions of maxillae in patients with CCD and compare them with healthy individuals. Files of four children with cleidocranial dysplasia were investigated. Volume of every maxillary sinus as well as two dimensional measurements of distances between particular points of interest located on surface of maxilla were calculated from reconstructed CBCT examination. Data were compared with a control group. Statistical analysis was performed. Linear and volumetric data obtained using CBCT was collected and compared with a control group. All affected children had both maxillary sinus volume and maxillary dimensions smaller than control values. The maxillary sinuses were underdeveloped up to half of normal values. The largest differences were recorded in vertical linear dimensions of the maxillae. Horizontal dimensions were also lower. There are morphological modifications of bone tissue which accompany CCD. It seems that these changes occur on the midfacial region and to a greater extent concern the maxillary sinus volume.

Introducing a simple method of maxillary sinus volume assessment based on linear dimensions.

Measuring sinus volume in a general practice clinic is a complex and time-consuming procedure, requiring experience in the use of radiological methods In the presented research, the automatically estimated maxillary sinus volume was compared with maxillary sinus volume assessed with mathematical formulas used to calculate the volume of spheres and pyramids. The starting point for the statistical analysis were specific measurements of the sinuses. We wanted to discover which geometric shape has the volume that is nearest to the automatically estimated volume. The study was performed using samples of CT scans of pediatric patients age 1-17. The dimensions (maximal width, maximal height, maximal length) were used for manual calculations. For the automatic volume calculation, the CT Image Segmentation algorithm (Syngo Via for Oncology, Siemens) was used. Pearson's correlation coefficient was applied to analyse the interrelationship between automatically and manually calculated volume of maxillary sinus. It was statistically established that the "sphere", "pyramid" and "mean" manually calculated maxillary sinus volume were accurate and strongly correlated with the automatically estimated maxillary sinus volume. The volume of the sphere corresponds better with the automatic measurements than the volume of the pyramid. The variations are significant and they were made reliable with the application of a statistical test. It is quick and easy to calculate the maxillary sinus volume based on its linear dimensions instead of applying advanced software. The manual method for maxillary sinus volume calculation requires three linear measurements of the sinus (length, width, and height) and can be recommended if the automatically estimated volume cannot be obtained.

The Association between Maxillary Sinus Dimensions and Midface Parameters during Human Postnatal Growth.

OBJECTIVE: The aim of the study based on CT images was to assess the age-related changes in maxillary sinus diameters in relation to diameters of the facial skeleton. MATERIALS AND METHODS: The retrospective analysis of CT images of the head of 170 patients aged 0-18 years (85 females and 85 males) was performed. Specific orientation points (zy, zm, pr, ns, n, and P) were identified in every patient and the following distances were measured: zy-zy, maximum facial width; zm-zm, midfacial width; n-pr, upper facial height; ns-pr, alveolar facial height; and ns-P, distance not indicated in craniometry. RESULTS: The maxillary sinuses of every patient were bilaterally measured in three planes. Three diameters were obtained: maximum transverse (horizontal) diameter called MSW, maximum vertical diameter called MSH, and maximum anteroposterior diameter (length) called MSL. In females, the correlation of MSW, MSH, and MSL and zy-zy, as well as n-pr distances, is very strong. Moreover, the significant correlation was found between all measurements of maxillary sinus and ns-pr as well as ns-P distances in females. The correlation between MSL and all measurements of midface as well as MSH and MSW and all measurements except ns-P is stronger in females than in males. In males, all measurements of maxillary sinus correlate with ns-P distance very strongly. CONCLUSIONS: The statistical analysis (correlation and determination coefficient) showed that all measurements of maxillary sinuses correlate with midface dimensions.

Development of the maxillary sinus from birth to age 18. Postnatal growth pattern.

OBJECTIVES: Anatomical and developmental descriptions of the maxillary sinus may be of great clinical importance. An understanding of age-related changes in the dimensions and volume of the normal maxillary sinus may help in the evaluation of radiographs and identification of sinus abnormalities. The aim of the present study was to define growth patterns of maxillary sinuses in children up to the age of 18 years and evaluate the correlation between normal age-related changes in dimensions and volume. METHODS: The research sample consisted of CT scans of 170 patients subdivided into 17 groups based on age. Normal developmental changes were investigated and linear dimensions measured. RESULTS: The maxillary sinus, present at birth, increases in size until the end of the 18th year. The growth pattern includes changes in vertical, horizontal and antero-posterior directions. No bilateral dimorphism was observed, but gender-related differences were found in children over the age of 8 years. The most extensive period of growth occurs during the first 8 years and by the end of the 16th year the maximal values of all diameters and volume are reached. CONCLUSIONS: A CT study of developing maxillary sinuses allowed a precise evaluation of age-related changes in all diameters and volume to be made.

Body mass estimation in modern population using anthropometric measurements from computed tomography.

Forensic anthropologists are able to estimate the stature of a skeleton, its sex and biological age at death, with a relatively high degree of accuracy. Body mass estimation from the stature and bi-iliac (maximum pelvic) breadth and femoral head breadth can be useful in forensic investigations involving unidentified skeletal remains. Predicting the body mass of skeletal remains always involves significant inaccuracy, however when body mass extremes are disregarded average figures provide the best estimation. The aim of the study was to investigate whether the methods usually used in body mass estimation are accurate in different BMI ranges. The usefulness of these methods in forensic anthropology was discussed. The study was performed using CT images of widely differing body types of modern central European populations. Maximum pelvic breadth and anteroposterior femoral head breadth were measured directly from the appropriate CT scan slices for each individual. Body mass index was established for each individual. Four different methods of body mass estimation were applied. The statistical analysis showed that body mass prediction methods based on the bi-iliac breadth with known stature and the femoral head breadth show strong correspondence. The results of body mass estimation using different methods were in high correlation with normal BMI. The accuracy of body mass prediction of underweight and obesity cases (BMI extremes) showed significant inaccuracy. Body mass estimation methods can provide important information for forensic anthropological investigation and personal identification. However, one should be aware of the discrepancies and should apply the equations carefully as they can carry significant errors.