Combined electrical-electrochemical phenotypic profiling of antibiotic susceptibility of in vitro biofilm models.

More than 65% of bacterial infections are caused by biofilms. However, standard biofilm susceptibility tests are not available for clinical use. All conventional biofilm models suffer from a long formation time and fail to mimic in vivo microbial biofilm conditions. Moreover, biofilms make it difficult to monitor the effectiveness of antibiotics. This work creates a powerful yet simple method to form a target biofilm and develops an innovative approach to monitoring the antibiotic's efficacy against a biofilm-associated infection. A paper-based culture platform can provide a new strategy for rapid microbial biofilm formation through capillary action. A combined electrical-electrochemical technique monitors bacterial metabolism rapidly and reliably by measuring microbial extracellular electron transfer (EET) and using electrochemical impedance spectroscopy (EIS) across a microbe-electrode interface. Three representative pathogens, Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus aureus, form their biofilms controllably within an hour. Within another hour their susceptibilities to three frontline antibiotics with different action modes (gentamicin, ciprofloxacin, and ceftazidime) are examined. Our antibiotic susceptibility testing (AST) technique provides a quantifiable minimum inhibitory concentration (MIC) of those antibiotics against the in vitro biofilm models and characterizes their action mechanisms. The results will have an important positive effect because they provide immediately actionable healthcare information at a reduced cost, revolutionizing public healthcare.

Moisture-Enabled Germination of Heat-Activated Bacillus Endospores for Rapid and Practical Bioelectricity Generation: Toward Portable, Storable Bacteria-Powered Biobatteries.

Small-scale battery-like microbial fuel cells (MFCs) are a promising alternative power source for future low-power electronics. Controllable microbial electrocatalytic activity in a miniaturized MFC with unlimited biodegradable energy resources would enable simple power generation in various environmental settings. However, the short shelf-life of living biocatalysts, few ways to activate the stored biocatalysts, and extremely low electrocatalytic capabilities render the miniature MFCs unsuitable for practical use. Here, heat-activated Bacillus subtilis spores are revolutionarily used as a dormant biocatalyst that can survive storage and rapidly germinate when exposed to special nutrients that are preloaded in the device. A microporous, graphene hydrogel allows the adsorption of moisture from the air, moves the nutrients to the spores, and triggers their germination for power generation. In particular, forming a CuO-hydrogel anode and an Ag2 O-hydrogel cathode promotes superior electrocatalytic activities leading to an exceptionally high electrical performance in the MFC. The battery-type MFC device is readily activated by moisture harvesting, producing a maximum power density of 0.4 mW cm-2 and a maximum current density of 2.2 mA cm-2 . The MFC configuration is readily stackable in series and a three-MFC pack produces enough power for several low-power applications, demonstrating its practical feasibility as a sole power source.

Cerium functionalized graphene nano-structures and their applications; A review.

Graphene-based nanomaterials with remarkable properties, such as good biocompatibility, strong mechanical strength, and outstanding electrical conductivity, have dramatically shown excellent potential in various applications. Increasing surface area and porosity percentage, improvement of adsorption capacities, reduction of adsorption energy barrier, and also prevention of agglomeration of graphene layers are the main advantages of functionalized graphene nanocomposites. On the other hand, Cerium nanostructures with remarkable properties have received a great deal of attention in a wide range of fields; however, in some cases low conductivity limits their application in different applications. Therefore, the combination of cerium structures and graphene networks has been widely invesitaged to improve properties of the composite. In order to have a comprehensive information of these nanonetworks, this research reviews the recent developments in cerium functionalized graphene derivatives (graphene oxide (GO), reduced graphene oxide (RGO), and graphene quantum dot (GQD) and their industrial applications. The applications of functionalized graphene derivatives have also been successfully summarized. This systematic review study of graphene networks decorated with different structure of Cerium have potential to pave the way for scientific research not only in field of material science but also in fluorescent sensing, electrochemical sensing, supercapacitors, and catalyst as a new candidate.

Unlocking Wearable Microbial Fuel Cells for Advanced Wound Infection Treatment.

Better infection control will accelerate wound healing and alleviate associated healthcare burdens. Traditional antibacterial dressings often inadequately control infections, inadvertently promoting antibacterial resistance. Our research unveils a novel, dual-functional living dressing that autonomously generates antibacterial agents and delivers electrical stimulation, harnessing the power of spore-forming Bacillus subtilis. This dressing is built on an innovative wearable microbial fuel cell (MFC) framework, using B. subtilis endospores as a powerful, dormant biocatalyst. The endospores are resilient, reactivating in nutrient-rich wound exudate to produce electricity and antibacterial compounds. The combination allows B. subtilis to outcompete pathogens for food and other resources, thus fighting infections. The strategy is enhanced by the extracellular synthesis of tin oxide and copper oxide nanoparticles on the endospore surface, boosting antibacterial action, and electrical stimulation. Moreover, the MFC framework introduces a pioneering dressing design featuring a conductive hydrogel embedded within a paper-based substrate. The arrangement ensures cell stability and sustains a healing-friendly moist environment. Our approach has proven very effective against three key pathogens in biofilms: Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus aureus demonstrating exceptional capabilities in both in vitro and ex vivo models. Our innovation marks a significant leap forward in wearable MFC-based wound care, offering a potent solution for treating infected wounds.

Struggles and Strategies in Understanding Information Visualizations.

While the visualization community is increasingly aware that people often find visualizations difficult to understand, there is less information about what we need to do to create comprehensible visualizations. To help visualization creators and designers improve their visualizations, we need to better understand what kind of support people are looking for in their sensemaking process. Empirical studies are needed to tease apart the details of what makes the process of understanding difficult for visualization viewers. We conducted a qualitative study with 14 participants, observing them as they described how they were trying to make sense of 20 information visualizations. We identified the challenges participants faced throughout their sensemaking process and the strategies they employed to help themselves in overcoming the challenges. Our findings show how details and nuances within visualizations can impact comprehensibility and offer research suggestions to help us move toward more understandable visualizations.

Accelerated antibiotic susceptibility testing of pseudomonas aeruginosa by monitoring extracellular electron transfer on a 3-D paper-based cell culture platform.

Pseudomonas aeruginosa is the most important opportunistic pathogen leading to serious and life-threatening infections, especially in immunocompromised patients. Because of its remarkable capacity to resist antibiotics, the selection of the right antibiotics with the exact dose for the appropriate duration is critical to effectively treat the infections and prevent antibiotic resistance. Although conventional genotypic and phenotypic antibiotic susceptibility testing (AST) methods have been dramatically advanced, they have suffered from many technical and operational issues as a generalized antibiotic stewardship program. Furthermore, given that most microbial infections are caused by their biofilms, the existing AST methods do not provide evidence-based antibiotic prescribing guidance for biofilm-based infections because the results are based on individual bacteria traditionally grown in their planktonic form. In this work, we create an innovative susceptibility testing technique for P. aeruginosa that offers clinically relevant guidelines and widely adaptable stewardship to effectively treat the infections and minimize antibiotic resistance. Our approach evaluates the antibiotic efficacy by continuously monitoring the accumulated electrical outputs from the bacterial extracellular electron transfer (EET) process in the presence of antibiotics. Our innovative paper-based culturing 3-D scaffold promotes surface-associated growth of bacterial colonies and biofilms. The platform replicates a natural habitat for P. aeruginosa where it can grow similarly to sites it infects. Our technique enables an all-electrical, real-time, easy-to-use, portable AST that can be easily translatable to clinical settings. The entire procedure takes 96 min to provide evidence-based antimicrobial prescribing guidance for biofilm-based infections.

Integrated Papertronic Techniques: Highly Customizable Resistor, Supercapacitor, and Transistor Circuitry on a Single Sheet of Paper.

Humanity's excessive production of material waste poses a critical environmental threat, and the problem is only escalating, especially in the past few decades with the rapid development of powerful electronic tools and persistent consumer desire to upgrade to the newest available technology. The poor disposability of electronics is especially an issue for the newly arising field of single-use devices and sensors, which are often used to evaluate human health and monitor environmental conditions, and for other novel applications. Though impressive in terms of function and convenience, usage of conventional electronic components in these applications would inflict an immense surge in waste and result in higher costs. This work's primary objective is to develop a cost-effective, eco-friendly, all-paper, device for single-use applications that can be easily and safely disposed of through incineration or biodegradation. All electronic components are paper-based and integrated on paper-based printed circuit boards (PCBs), innovatively providing a realistic and practical solution for green electronic platforms. In particular, a methodology is discussed for simultaneously achieving very tunable resistors (20 Ω to 285 kΩ), supercapacitors (∼3.29 mF), and electrolyte-gated field-effect transistors on and within the thickness of a single sheet of paper. Each electronic component is completely integrated into functionalized paper regions and exhibits favorable electrical activity, adjustability, flexibility, and disposability. A simple amplifier circuit is successfully demonstrated within a small area and within the thickness of a single sheet of paper, displaying component versatility and the capability for their fabrication processes to be performed in parallel for efficient and rapid development.

Trends of Obesity in 10-Years of Follow-up among Tehranian Children and Adolescents: Tehran Lipid and Glucose Study (TLGS).

BACKGROUND: We aimed to investigate the trend of childhood obesity in Tehranian population during a median follow-up of 10 years. METHODS: Within a prospective cohort study, using data collected from Tehran Lipid and Glucose Study (TLGS), 1406 participants, aged 3-11 yr were selected and monitored in 4 phases: phase I (1999-2001), phase II (2002-2005), phase III (2006-2008) and phase IV (2009-2011). RESULTS: Total prevalence of obesity in children increased from 5.5% to 9.4% from phase I to IV. Performing GEE (Generalized Estimating Equation) analysis, relative risk of obesity was calculated, comparing each phase to its previous phase: phase II in reference to phase I (RR=1.06, CI=1.04-1.08), phase III in reference to phase II (RR=1.01, CI=1.00-1.03) and phase IV in reference to phase III (RR=0.96, CI=0.94-0.98). Between group difference was significant in all subgroups (age, gender, parental obesity) except parental education. Test of interaction for effect of time was insignificant in all subgroups except for the age group. For children younger than 7 yr old at phase I, trend of obesity throughout the study was higher compared to those with 7 yr of age and older at phase I. CONCLUSION: During a decade of follow-up, trend of obesity was rising in this Tehranian children in both genders, especially in younger children. Any preventive interventions for stopping this trend should focus on early stages of childhood.