Reductive Termination of Cyanoisopropyl Radicals by Copper(I) Complexes and Proton Donors: Organometallic Intermediates or Coupled Proton-Electron Transfer?

Cyanoisopropyl radicals, generated thermally by the decomposition of azobis(isobutyronitrile) (AIBN), participate in reductive radical termination (RRT) under the combined effect of copper(I) complexes and proton donors (water, methanol, triethylammonium salts) in acetonitrile or benzene. The investigated copper complexes were formed in situ from [CuI(MeCN)4]+BF4- in CD3CN or CuIBr in C6D6 using tris[2-(dimethylamino)ethyl]amine (Me6TREN), tris(2-pyridylmethyl)amine (TPMA), and 2,2'-bipyridine (BIPY) ligands. Upon keeping all other conditions constants, the impact of RRT is much greater for the Me6TREN and TPMA systems than for the BIPY system. RRT scales with the proton donor acidity (Et3NH+ ≫ H2O > CH3OH), it is reduced by deuteration (H2O > D2O and CH3OH > CD3OD), and it is more efficient in C6D6 than in CD3CN. The collective evidence gathered in this study excludes the intervention of an outer-sphere proton-coupled electron transfer (OS-PCET), while an inner-sphere PCET (IS-PCET) cannot be excluded for coordinating proton donors (water and methanol). On the other hand, the strong impact of RRT for the noncoordinating Et3NH+ in CD3CN results from the formation of an intermediate CuI-radical adduct, suggested by DFT calculations to involve binding via the N atom to yield keteniminato [L/Cu-N═C═CMe2]+ derivatives with only partial spin delocalization onto the Cu atom.

Atom Transfer Radical Polymerization: Billion Times More Active Catalysts and New Initiation Systems.

Approaching 25 years since its invention, atom transfer radical polymerization (ATRP) is established as a powerful technique to prepare precisely defined polymeric materials. This perspective focuses on the relation between structure and activity of ATRP catalysts, and the consequent choice of the initiating system, which are paramount aspects to well-controlled polymerizations. The ATRP mechanism is discussed, including the effect of kinetic and thermodynamic parameters and side reactions affecting the catalyst. The coordination chemistry and activity of copper complexes used in ATRP are reviewed in chronological order, while emphasizing the structure-activity correlation. ATRP-initiating systems are described, from normal ATRP to low ppm Cu systems. Most recent advancements regarding dispersed media and oxygen-tolerant techniques are presented, as well as future opportunities that arise from progressively more active catalysts and deeper mechanistic understanding.

Synthesis and Characterization of the Most Active Copper ATRP Catalyst Based on Tris[(4-dimethylaminopyridyl)methyl]amine.

The tris[(4-dimethylaminopyridyl)methyl]amine (TPMANMe2) as a ligand for copper-catalyzed atom transfer radical polymerization (ATRP) is reported. In solution, the [CuI(TPMANMe2)Br] complex shows fluxionality by variable-temperature NMR, indicating rapid ligand exchange. In the solid state, the [CuII(TPMANMe2)Br][Br] complex exhibits a slightly distorted trigonal bipyramidal geometry (τ = 0.89). The UV-vis spectrum of [CuII(TPMANMe2)Br]+ salts is similar to those of other pyridine-based ATRP catalysts. Electrochemical studies of [Cu(TPMANMe2)]2+ and [Cu(TPMANMe2)Br]+ showed highly negative redox potentials (E1/2 = -302 and -554 mV vs SCE, respectively), suggesting unprecedented ATRP catalytic activity. Cyclic voltammetry (CV) in the presence of methyl 2-bromopropionate (MBrP; acrylate mimic) was used to determine activation rate constant ka = 1.1 × 106 M-1 s-1, confirming the extremely high catalyst reactivity. In the presence of the more active ethyl α-bromoisobutyrate (EBiB; methacrylate mimic), total catalysis was observed and an activation rate constant ka = 7.2 × 106 M-1 s-1 was calculated with values of KATRP ≈ 1. ATRP of methyl acrylate showed a well-controlled polymerization using as little as 10 ppm of catalyst relative to monomer, while side reactions such as CuI-catalyzed radical termination (CRT) could be suppressed due to the low concentration of L/CuI at a steady state.

Catalyzed Radical Termination in the Presence of Tellanyl Radicals.

The decomposition of the diazo initiator dimethyl 2,2'-azobis(isobutyrate) (V-601), generating the Me2 C. (CO2 Me) radical, affords essentially the same fraction of disproportionation and combination in media with a large range of viscosity (C6 D6 , [D6 ]DMSO, and PEG 200) in the 25-100 °C range. This is in stark contrast to recent results by Yamago et al. on the same radical generated from Me2 C(TeMe)(CO2 Me) and on other X-TeR systems (X=polymer chain or unimer model; R=Me, Ph). The discrepancy is rationalized on the basis of an unprecedented RTe. -catalyzed radical disproportionation, with support from DFT calculations and photochemicaL V-601 decomposition in the presence of Te2 Ph2 .

A silver bullet: elemental silver as an efficient reducing agent for atom transfer radical polymerization of acrylates.

Elemental silver was used as a reducing agent in the atom transfer radical polymerization (ATRP) of acrylates. Silver wire, in conjunction with a CuBr(2)/TPMA catalyst, enabled the controlled, rapid preparation of polyacrylates with dispersity values down to D = 1.03. The silver wire in these reactions was reused several times in sequential reactions without a decline in performance, and the amount of copper catalyst used was reduced to 10 ppm without a large decrease in control. A poly(n-butyl acrylate)-block-poly(tert-butyl acrylate) diblock copolymer was synthesized with a molecular weight of 91 400 and D = 1.04, demonstrating good retention of chain-end functionality and a high degree of livingness in this ATRP system.

Properties and ATRP activity of copper complexes with substituted tris(2-pyridylmethyl)amine-based ligands.

Synthesis, characterization, electrochemical studies, and ATRP activity of a series of novel copper(I and II) complexes with TPMA-based ligands containing 4-methoxy-3,5-dimethyl-substituted pyridine arms were reported. In the solid state, Cu(I)(TPMA*(1))Br, Cu(I)(TPMA*(2))Br, and Cu(I)(TPMA*(3))Br complexes were found to be distorted tetrahedral in geometry and contained coordinated bromide anions. Pseudo-coordination of the aliphatic nitrogen atom to the copper(I) center was observed in Cu(I)(TPMA*(2))Br and Cu(I)(TPMA*(3))Br complexes, whereas pyridine arm dissociation occurred in Cu(I)(TPMA*(1))Br. All copper(I) complexes with substituted TPMA ligands exhibited a high degree of fluxionality in solution. At low temperature, Cu(I)(TPMA*(1))Br was found to be symmetrical and monomeric, while dissociation of either unsubstituted pyridine and/or 4-methoxy-3,5-dimethyl-substituted pyridine arms was observed in Cu(I)(TPMA*(2))Br and Cu(I)(TPMA*(3))Br. On the other hand, the geometry of the copper(II) complexes in the solid state deviated from ideal trigonal bipyramidal, as confirmed by a decrease in τ values ([Cu(II)(TPMA*(1))Br][Br] (τ = 0.92) > [Cu(II)(TPMA*(3))Br][Br] (τ = 0.77) > [Cu(II)(TPMA*(2))Br][Br] (τ = 0.72)). Furthermore, cyclic voltammetry studies indicated a nearly stepwise decrease (ΔE ≈ 60 mV) of E1/2 values relative to SCE (TPMA (-240 mV) > TPMA*(1) (-310 mV) > TPMA*(2) (-360 mV) > TPMA*(3) (-420 mV)) on going from [Cu(II)(TPMA)Br][Br] to [Cu(II)(TPMA*(3))Br][Br], confirming that the presence of electron-donating groups in the 4 (-OMe) and 3,5 (-Me) positions of the pyridine rings in TPMA increases the reducing ability of the corresponding copper(I) complexes. This increase was mostly the result of a stronger influence of substituted TPMA ligands toward stabilization of the copper(II) oxidation state (log ß(I) = 13.4 ± 0.2, log ß(II) = 19.3 (TPMA*(1)), 20.5 (TPMA*(2)), and 21.5 (TPMA*(3))). Lastly, ARGET ATRP kinetic studies show that with more reducing catalysts an induction period is observed. This was attributed to slow regeneration of Cu(I) species from the corresponding Cu(II).

How are radicals (re)generated in photochemical ATRP?

The polymerization mechanism of photochemically mediated Cu-based atom-transfer radical polymerization (ATRP) was investigated using both experimental and kinetic modeling techniques. There are several distinct pathways that can lead to photochemical (re)generation of Cu(I) activator species or formation of radicals. These (re)generation pathways include direct photochemical reduction of the Cu(II) complexes by excess free amine moieties and unimolecular reduction of the Cu(II) complex, similar to activators regenerated by electron-transfer (ARGET) ATRP processes. Another pathway is photochemical radical generation either directly from the alkyl halide, ligand, or via interaction of ligand with either monomer or with alkyl halides. These photochemical radical generation processes are similar to initiators for continuous activator regeneration (ICAR) ATRP processes. A series of model experiments, ATRP reactions, and kinetic simulations were performed to evaluate the contribution of these reactions to the photochemical ATRP process. The results of these studies indicate that the dominant radical (re)generation reaction is the photochemical reduction of Cu(II) complexes by free amines moieties (from amine containing ligands). The unimolecular reduction of the Cu(II) deactivator complex is not significant, however, there is some contribution from ICAR ATRP reactions involving the interaction of alkyl halides and ligand, ligand with monomer, and the photochemical cleavage of the alkyl halide. Therefore, the mechanism of photochemically mediated ATRP is consistent with a photochemical ARGET ATRP reaction dominating the radical (re)generation.