Characterization of a Ruthenium(II) Complex in Singlet Oxygen-Mediated Photoelectrochemical Sensing.

A water-soluble ruthenium(II) complex (L), capable of producing singlet oxygen (1O2) when irradiated with visible light, was used to modify the surface of an indium-tin oxide (ITO) electrode decorated with a nanostructured layer of TiO2 (TiO2/ITO). Singlet oxygen triggers the appearance of a cathodic photocurrent when the electrode is illuminated and biased at a proper reduction potential value. The L/TiO2/ITO electrode was first characterized with cyclic voltammetry, impedance spectroscopy, NMR, and Raman spectroscopy. The rate constant of singlet oxygen production was evaluated by spectrophotometric measurements. Taking advantage of the oxidative process initiated by 1O2, the analysis of phenolic compounds was accomplished. Particularly, the 1O2-driven oxidation of hydroquinone (HQ) produced quinone moieties, which could be reduced back at the electrode surface, biased at -0.3 V vs Ag/AgCl. Such a light-actuated redox cycle produced a photocurrent dependent on the concentration of HQ in solution, exhibiting a limit of detection (LOD) of 0.3 µmol dm-3. The L/TiO2/ITO platform was also evaluated for the analysis of p-aminophenol, a commonly used reagent in affinity sensing based on alkaline phosphatase.

A multi-analytical approach for the study of red stains on heritage marble.

Red stains are a common discolouration on stone cultural heritage all over the world. These are very difficult to remove and little is known about the reddish pigmentation. Numerous red stains were mapped on the Baptistery of San Giovanni in Florence, one of the most important monuments in Italy. This paper is focused on red stains on marble stone and the results of a detailed multidisciplinary approach are presented. Several analytical and investigation techniques (such as optical microscopy, X-ray fluorescence mapping, X-ray micro-tomography, micro-Raman spectroscopy, scanning electron microscopy with energy dispersive spectroscopy, microbial isolation, colorimetric measurements and isotopic analyses) were used to better understand the origin and processes involved in this kind of alteration. Analyses of the red stains led us to believe the presence of minium (lead tetroxide) and Pb are usually concentrated in the spaces between calcite grains. Red stains of Pb isotopic composition also overlap with data from Sardinian mines. These preliminary data seem to reinforce the suggestion of a source of lead from some metallic items (during restoration campaigns between 1938 and 1944, damaged parts were removed and replaced, and the new marble cladding was fixed with iron brackets treated with minium).

Surface Enhanced Raman Spectroscopy for In-Field Detection of Pesticides: A Test on Dimethoate Residues in Water and on Olive Leaves.

Dimethoate (DMT) is an organophosphate insecticide commonly used to protect fruit trees and in particular olive trees. Since it is highly water-soluble, its use on olive trees is considered quite safe, because it flows away in the residual water during the oil extraction process. However, its use is strictly regulated, specially on organic cultures. The organic production chain certification is not trivial, since DMT rapidly degrades to omethoate (OMT) and both disappear in about two months. Therefore, simple, sensitive, cost-effective and accurate methods for the determination of dimethoate, possibly suitable for in-field application, can be of great interest. In this work, a quick screening method, possibly useful for organic cultures certification will be presented. DMT and OMT in water and on olive leaves have been detected by surface enhanced Raman spectroscopy (SERS) using portable instrumentations. On leaves, the SERS signals were measured with a reasonably good S/N ratio, allowing us to detect DMT at a concentration up to two orders of magnitude lower than the one usually recommended for in-field treatments. Moreover, detailed information on the DMT distribution on the leaves has been obtained by Raman line- (or area-) scanning experiments.

Resonance Raman Spectra of o-Safranin Dye, Free and Adsorbed on Silver Nanoparticles: Experiment and Density Functional Theory Calculation.

The properties of o-Safranin (SO) dye in the first electronic excited state were studied with combined experimental and theoretical methods. The electronic absorption spectra of SO molecules are measured in water solution and in the presence of silver nanoparticles. The normal Raman (NRS) and resonance Raman (RR) spectra of solid SO and the surface enhanced Raman (SERS) and surface enhanced resonance Raman (SE[R]RS) spectra of SO adsorbed on silver nanoparticles are measured at different excitation energies. The enhancement factors for selected vibrational bands of the RR, SERS, and SE[R]RS spectra of SO have been obtained with respect to the NRS spectra of the solid after a careful evaluation of the experimental conditions. The data furnished useful information on the excited electronic states and the interactions of SO with silver nanoparticles. The experimental results are discussed on the basis of DFT and TD-DFT calculations (B3LYP/6-311+G(d,p)) on the isolated SO molecule.

Tailored micro-extraction method for Raman/SERS detection of indigoids in ancient textiles.

Indigoid dyes are well known as vat dyes. In their oxidized dichetonic form they are stable and insoluble in water, whereas in their reduced form, commonly known as leuco, they are soluble in water and able to be attached to fabric for dyeing purposes. These blue dyes are usually easily detectable in art objects by means of Raman spectroscopy by adopting for analyses a laser line at a high wavelength, such as a 785 nm diode laser. Unfortunately, in ancient artworks, that are often highly degraded, it is not always possible to collect high quality Raman spectra, which makes the analysis and identification of these compounds particularly challenging. In this work, we present a tailor-made methodology for the extraction and the recognition of indigoid dyes in works of art, which exploits the solubility of these compounds in their reduced form. Excellent Raman and surface enhanced Raman spectroscopy (SERS) spectra of indigo were acquired after micro-extraction on ancient and reference textiles, confirming the reliability of the presented procedure. Moreover, the methodology has been applied also for the extraction of the indigoid dye Tyrian purple on a reference textile, showing excellent results. This analytical method has been found to be extremely safe both for the reference textiles and the investigated ancient textiles, thus being a promising procedure for the selective analysis and detection of indigoid compounds in objects of artistic relevance.

Alternative SERRS probes for the immunochemical localization of ovalbumin in paintings: an advanced mapping detection approach.

In the field of analytical chemistry, many scientific efforts have been devoted to develop experimental procedures for the characterization of organic substances present in heterogeneous artwork samples, due to their challenging identification. In particular, performances of immunochemical techniques have been recently investigated, optimizing ad hoc systems for the identification of proteins. Among all the different immunochemical approaches, the use of metal nanoparticles - for surface enhanced Raman scattering (SERS) detection - remains one of the most powerful methods that has still not been explored enough for the analysis of artistic artefacts. For this reason, the present research work was aimed at proposing a new optimized and highly efficient indirect immunoassay for the detection of ovalbumin. In particular, the study proposed a new SERRS probe composed of gold nanoparticles (AuNPs) functionalised with Nile Blue A and produced with an excellent green and cheap alternative approach to the traditional chemical nanoparticles synthesis: the laser ablation synthesis in solution (LASiS). This procedure allows us to obtain stable nanoparticles which can be easily functionalized without any ligand exchange reaction or extensive purification procedures. Moreover, the present research work also focused on the development of a comprehensive analytical approach, based on the combination of potentialities of immunochemical methods and Raman analysis, for the simultaneous identification of the target protein and the different organic and inorganic substances present in the paint matrix. An advanced mapping detection system was proposed to achieve the exact spatial location of all the components through the creation of false colour chemical maps.

Surface-Enhanced Raman Spectroscopy for Bisphenols Detection: Toward a Better Understanding of the Analyte-Nanosystem Interactions.

Silver nanoparticles functionalized with thiolated ß-cyclodextrin (CD-SH) were employed for the detection of bisphenols (BPs) A, B, and S by means of surface-enhanced Raman spectroscopy (SERS). The functionalization of Ag nanoparticles with CD-SH leads to an improvement of the sensitivity of the implemented SERS nanosensor. Using a multivariate analysis of the SERS data, the limit of detection of these compounds was estimated at about 10-7 M, in the range of the tens of ppb. Structural analysis of the CD-SH/BP complex was performed by density functional theory (DFT) calculations. Theoretical results allowed the assignment of key structural vibrational bands related to ring breathing motions and the inter-ring vibrations and pointed out an external interaction due to four hydrogen bonds between the hydroxyl groups of BP and CD located at the external top of the CD cone. DFT calculations allowed also checking the interaction energies of the different molecular species on the Ag surface and testing the effect of the presence of CD-SH on the BPs' affinity. These findings were in agreement with the experimental evidences that there is not an actual inclusion of BP inside the CD cavity. The SERS sensor and the analysis procedure of data based on partial least square regression proposed here were tested in a real sample consisting of the detection of BPs in milk extracts to validate the detection performance of the SERS sensor.

The Raman and SERS spectra of indigo and indigo-Ag2 complex: DFT calculation and comparison with experiment.

Using time-dependent density functional theory in conjunction with B3LYP functional and LANL2DZ/6-31+g(d,p) basis sets, static and pre-resonance Raman spectra of the indigo-Ag2 complex have been calculated. Structure optimization, excitation energies and pre-resonance Raman spectra of the indigo molecule have been obtained at the same level of theory. The available experimental Raman spectra at 1064, 785 and 514nm and the SERS spectra at 785 and 514nm have been well reproduced by the calculation. Experimental SERS spectra are confronted with the calculated pre-resonance Raman spectra obtained for the indigo-Ag2 complex. The Raman activities calculated under the infinite lifetime approximation show a strong dependence upon the proximity to the energy and the oscillator strength of the excitation electronic transition. The comparison of the integrated EFs for indigo and indigo-Ag2 calculated Raman spectra, gave some hints as to the enhancement mechanisms acting for the different excitation wavelengths. Whereas for excitation at a wavelength corresponding to 785nm, the enhancement mechanism for the Raman spectrum of the metal complex seems the chemical one, the strong increment (ten times) of the integrated EF of the Raman spectra of the complex in the case of 514nm excitation, suggests the onset of other enhancement mechanisms. Assuming that intra-cluster transitions with high oscillator strength can be thought of as to mimic surface plasmons excitations, we suggest the onset of the electromagnetic mechanisms (EM) as the origin of the Raman spectrum enhancement. Nevertheless, other enhancement effects cannot be ruled out, as a new molecular transition gains strength in the proximity of the excitation wavelength, as a consequence of the symmetry lowering of the molecule in the complex. A large variation across vibrational modes, by a factor of at least 104, was found for the EFs. This large variation in the EFs can indicate that B-term Herzberg-Teller scattering, due to metal and/or charge transfer states, can feed intensity to the inactive (in the molecule) and/or non totally symmetric modes.

Silver nanowires as infrared-active materials for surface-enhanced Raman scattering.

Surface-enhanced Raman scattering (SERS) is increasing in significance as a bioanalytical tool. Novel nanostructured metal substrates are required to improve performances and versatility of SERS spectroscopy. In particular, as biological tissues are relatively transparent in the infrared wavelength range, SERS-active materials suitable for infrared laser excitation are needed. Nanowires appear interesting in this respect as they show a very broad localized surface plasmon resonance band, ranging from near UV to near infrared wavelengths. The SERS activity of silver nanowires has been tested at three wavelengths and a fair enhancement at 1064 and 514 nm has been observed, whereas a very weak enhancement was present when exciting close to the nanowire extinction maximum. These experimentally measured optical properties have been contrasted with finite element method simulations. Furthermore, laser-induced optoacoustic spectroscopy measurements have shown that the extinction at 1064 nm is completely due to scattering. This result has an important implication that no heating occurs when silver nanowires are utilized as SERS-active substrates, thereby preventing possible thermal damage.

Multivariate Analysis of Combined Fourier Transform Near-Infrared Spectrometry (FT-NIR) and Raman Datasets for Improved Discrimination of Drying Oils.

This work explores the application of chemometric techniques to the analysis of lipidic paint binders (i.e., drying oils) by means of Raman and near-infrared spectroscopy. These binders have been widely used by artists throughout history, both individually and in mixtures. We prepared various model samples of the pure binders (linseed, poppy seed, and walnut oils) obtained from different manufacturers. These model samples were left to dry and then characterized by Raman and reflectance near-infrared spectroscopy. Multivariate analysis was performed by applying principal component analysis (PCA) on the first derivative of the corresponding Raman spectra (1800-750 cm(-1)), near-infrared spectra (6000-3900 cm(-1)), and their combination to test whether spectral differences could enable samples to be distinguished on the basis of their composition. The vibrational bands we found most useful to discriminate between the different products we studied are the fundamental ν(C=C) stretching and methylenic stretching and bending combination bands. The results of the multivariate analysis demonstrated the potential of chemometric approaches for characterizing and identifying drying oils, and also for gaining a deeper insight into the aging process. Comparison with high-performance liquid chromatography data was conducted to check the PCA results.

Amplified extended modes in random lasers.

We report on a new random laser phenomenon that gives rise to narrow emission modes without requiring optical cavities. Sharp emission peaks are observed experimentally over a broad range of scattering strengths and analyzed in numerical calculations. We find that the introduction of exponential gain in a multiple light scattering process strongly increases the importance of very long light paths. Such long paths are rare and often neglected in passive disordered materials but we show that they can dominate the emission spectrum from an amplifying disordered system.