A novel technique to harvest bone autografts with mild local hyperthermia and enhanced osteogenic bone quality: a preclinical study in dogs.

BACKGROUND: Guided bone regeneration (GBR) involves collecting bone autografts with high bio-quality and efficiency. The current non-irrigated low-speed drilling has been limited for broader application in bone autograft harvest due to its low efficiency, inability to conduct buccal cortical perforation, and dependence on simultaneous implant placement. Increasing the drilling speed helps improve the efficiency but may incur thermal-mechanical bone damage. Most studies have addressed thermal reactions during bone drilling on non-vital models, which is irrelevant to clinical scenarios. Little has been known about bone's in vivo thermal profiles under non-irrigated higher-speed drilling and its influences on the resulting bone chips. AIM: A novel technique for bone harvest and cortical perforation via in-situ non-irrigated higher-speed drilling was proposed and investigated for the first time. METHODS: The third mandible premolars of eight beagles were extracted and healed for three months. Sixteen partial edentulous sites (left and right) were randomized into four groups for bone autograft harvest without irrigation: chisel, 50 rpm drilling, 500 rpm drilling, and 1000 rpm drilling. Bone chips were harvested on the buccal plates of the missing tooth. An infrared camera and an implantable thermocouple collaboratively monitored in vivo real-time bone temperature at the drilling sites. In vitro performances of cells from bone chips, including cell number, viability, proliferation, migration, ALP activity, in vitro mineralization, mRNA transcriptional level of osteogenic genes and heat shock protein 70 (HSP-70), and HSP-70 expression at the protein level were also studied. RESULTS: 500 rpm produced mild local hyperthermia with a 2-6 °C temperature rise both on the cortical surface and inside the cortical bone. It also held comparable or enhanced cell performances such as cell number, viability, proliferation, migration, ALP activity, in vitro mineralization, and osteogenic genes expression. CONCLUSIONS: In-situ non-irrigated higher-speed drilling at 500 rpm using a screw drill is versatile, efficient, and thermal friendly and improves the bio-quality of bone chips. Our novel technique holds clinical translational potential in GBR application.

Effect of a neodymium-doped yttrium aluminium garnet laser on the physicochemical properties of contaminated titanium surfaces and macrophage polarization.

AIM(S): The objective of this study was to evaluate the changes in the physical and chemical properties of titanium surfaces contaminated by a Nd:YAG laser with different levels of energy and the regulation of macrophage polarization. MATERIALS AND METHODS: The titanium specimens were divided into four groups. The blank control group consisted of the above-mentioned contaminated titanium specimens, and the conditioned control group consisted of sandblasted and acid-etched (SLA) titanium surfaces. The blank control and condition control groups were sealed and preserved in a sterile dark box. There were two experimental groups treated with the Nd:YAG laser-one with 0.5 W and the second with 1.0 W. Surface characteristics were evaluated using scanning electron microscopy, surface profilometry, and contact angle assays. The macrophage viability and proliferation of mouse RAW246.7 were analysed, and the macrophage surface markers, macrophage cytokines, and inflammatory and anti-inflammatory genes were expressed. RESULTS: The Nd:YAG laser increased the hydrophilicity and roughness of the titanium surface after decontamination. Fewer RAW264.7 cells were observed on the titanium surface after Nd:YAG decontamination than on the contaminated titanium surface expressing the M1-type macrophage marker CCR7, whereas more cells were observed after decontamination than on the contaminated titanium surface expressing the M2-type macrophage marker CD206. Following Nd:YAG laser treatment, the secretion of the inflammatory cytokines IL-1ß and TNF-α by RAW264.7 cells on the titanium surface was decreased, whereas the secretion of the anti-inflammatory cytokines IL-4 and IL-10 was increased. RAW264.7 cells cultured for 3 days on the titanium surface after Nd:YAG decontamination treatment expressed significantly reduced levels of the inflammation-related genes IL-1ß, TNF-α, IL-6 and iNOS. The expression of the anti-inflammatory genes Arg-1, IL-4, IL-10 and TGF-ß by RAW264.7 cells was significantly up-regulated after 3 days of incubation on the titanium surface after Nd:YAG decontamination treatment. CONCLUSION(S): The Nd:YAG laser increased the hydrophilicity and roughness of the titanium surface after decontamination, and this change inhibited M1-type macrophage polarization and promoted M2-type macrophage polarization.

The survival rates and risk factors of implants in the early stage: a retrospective study.

BACKGROUND: Few large-sample studies in China have focused on the early survival of dental implants. The present study aimed to report the early survival rates of implants and determine the related influencing factors. METHODS: All patients receiving dental implants at our institution between 2006 and 2017 were included. The endpoint of the study was early survival rates of implants, according to gender, age, maxilla/mandible, dental position, bone augmentation, bone augmentation category, immediate implant, submerged implant category, implant diameter, implant length, implant torque, and other related factors. Initially, SPSS22.0 was used for statistical analysis. The Chi-square test was used to screen all factors, and those with p < 0.05 were further introduced into a multiple logistic regression model to illustrate the risk factors for early survival rates of implants. RESULTS: In this study, we included 1078 cases (601 males and 477 females) with 2053 implants. After implantation, 1974 implants were retained, and the early survival rate was 96.15%. Patients aged 30-60 years (OR 2.392), with Class I bone quality (OR 3.689), bone augmentation (OR 1.742), immediate implantation (OR 3.509), and implant length < 10 mm (OR 2.972), were said to possess risk factors conducive to early survival rates. CONCLUSIONS: The early survival rate of implants in our cohort exceeded 96%, with risk factors including age, tooth position, bone quality, implant length, bone augmentation surgery, and immediate implantation. When the above factors coexist, implant placement should be treated carefully.

20(S)-hydroxycholesterol and simvastatin synergistically enhance osteogenic differentiation of marrow stromal cells and bone regeneration by initiation of Raf/MEK/ERK signaling.

Previous studies have demonstrated the significant roles of simvastatin (SVA) and oxysterols in the osteogenesis process. In this study, we evaluate the effect of a combination of SVA and 20(S)-hydroxycholesterol (20(S)OHC) on the cell viability and osteogenic differentiation of bone marrow stromal cells (BMSCs). After treatment with a control vehicle, SVA (0.025, 0.10, 0.25 or 1.0 µM), 20(S)OHC (5 µM), or a combination of both (0.25 µM SVA + 5 µM 20(S)OHC), the proliferation, apoptosis, ALP activity, mineralization, osteogenesis-related gene expression and Raf/MEK/ERK signaling activity in BMSCs were measured. Our results showed that high concentrations of SVA (0.25 and 1.0 µM) enhanced osteogenesis-related genes expression while attenuating cell viability. The addition of 5 µM 20(S)OHC induced significantly higher proliferative activity, which neutralized the inhibitory effect of SVA on the viability of BMSCs. Moreover, compared to supplementation with only one of the additives, combined supplementation with both SVA and 20(S)OHC induced significantly enhanced ALP activity, calcium sedimentation, osteogenesis-related genes (ALP, OCN and BMP-2) expression and Raf/MEK/ERK signaling activity in BMSCs; these enhancements were attenuated by treatment with the inhibitor U0126, indicating a significant role of Raf/MEK/ERK signaling in mediating the synergistically enhanced osteogenic differentiation of BMSCs by combined SVA and 20(S)OHC treatment. Additionally, histological examination confirmed a synergistic effect of SVA and 20(S)OHC on enhancing bone regeneration in a rabbit calvarial defect model. This newly developed SVA/20(S)OHC formulation may be used as an osteoinductive drug to enhance bone healing.

Comparison of early osseointegration between laser-treated/acid-etched and sandblasted/acid-etched titanium implant surfaces.

This study was designed to compare the early osseointegration of titanium surfaces prepared via laser-treated/acid-etched (LA) and sandblasted/acid-etched (SLA) in dogs. Titanium implants were divided into two groups: Surfaces of the experimental group were treated via LA, while in the control group, surfaces were treated via SLA. The physical and chemical properties of LA and SLA surfaces were tested and compared. Sixteen implants with LA or SLA surfaces were placed into the tibias of four beagle dogs, each treatment group received two implants per single tibia. The dogs were sacrificed two and four weeks after implant placement. Scanning electron microscopy showed that both the LA and SLAs surface exhibited rough structures with micro pores sized 1-3 µm. In the LA surface, regular melting points were observed. However, in the SLA surface, the structure was irregular and few oxide aluminum particles still remained. Only titanium and a small amount of titanium compounds were detected on LA surfaces, while Al was found of SLA surfaces. The LA surface roughness was above that of SLA surfaces (LA: Ra: 2.1 µm; SLA: Ra :1.53 µm; P < 0.01). Both groups exhibited good osseointegration and no significant differences were found in the BIC% at two or four weeks between both groups (P > 0.05). Both groups exhibited good osseointegration; however, the LA surface was cleaner and more uniform than the SLA surface, and no significant differences were found between both groups.

Treatment of Sinus Graft Infection After Sinus Floor Elevation: A Series of Four Case Reports.

This report of cases aims to share our treatment experiences in 4 sinus graft infection cases after sinus floor elevation and simultaneous implant placement. The preoperative and postoperative intraoral and radiographic photographs were collected and used to assess the treatment outcomes. The sinus cavity status, bone augmentation results, and implant stability were used as measurements to determine the treatment effectiveness. Four patients received partial graft removal as their surgical treatment for sinus graft infection combined with antibiotic therapy, with or without immediate secondary grafting. After early intervention, antibiotic therapy, and partial debridement of the infected sinus grafts, radiographic and clinical outcomes indicate successful resolution of the graft infection and stable bone graft levels around the implants. The keys to the successful management of the sinus graft infection were: early detection of the infection; early intervention, including partial debridement of the infected graft particles; and antibiotic therapy.

Pathogenic factors of maxillary sinus mucosal thickening observed by cone-beam computed tomography (CBCT).

OBJECTIVE: To explore the pathogenic factors associated with maxillary sinus mucosal thickening with Cone-beam computed Tomography (CBCT). METHODS: From 2016 through 2020, 93 patients with periapical periodontitis or periodontitis in the maxillary posterior dental region were selected. RESULTS: The preoperative thickness of the periodontitis group was significantly higher than that of the periapical periodontitis group (P < 0.05). The difference achieves statistical significance for the comparison of the thickness change with various severity of inflammation (F = 54.824, P = 0.000), the change with time (F = 312.741, P = 0.000). and the change with the interaction severity of inflammation and time（F = 86.132, P = 0.000). CONCLUSIONS: Patients with maxillary sinus mucosa thickening caused by periodontitis and periapical periodontitis should be extracted their infectious teeth and get thoroughly debridement. Maxillary sinus augmentation can perform favorable efforts 3-6 months after extracting teeth.

Co-culture of STRO1 + human gingival mesenchymal stem cells and human umbilical vein endothelial cells in 3D spheroids: enhanced in vitro osteogenic and angiogenic capacities.

Stem cell spheroid is a promising graft substitute for bone tissue engineering. Spheroids obtained by 3D culture of STRO1+ Gingival Mesenchymal Stem Cells (sGMSCs) (sGMSC spheroids, GS) seldom express angiogenic factors, limiting their angiogenic differentiation in vivo. This study introduced a novel stem cell spheroid with osteogenic and angiogenic potential through 3D co-culture of sGMSCs and Human Umbilical Vein Endothelial Cells (HUVECs) (sGMSC/HUVEC spheroids, GHS). GHS with varying seeding ratios of sGMSCs to HUVECs (GHR) were developed. Cell fusion within the GHS system was observed via immunofluorescence. Calcein-AM/PI staining and chemiluminescence assay indicated cellular viability within the GHS. Furthermore, osteogenic and angiogenic markers, including ALP, OCN, RUNX2, CD31, and VEGFA, were quantified and compared with the control group comprising solely of sGMSCs (GS). Incorporating HUVECs into GHS extended cell viability and stability, initiated the expression of angiogenic factors CD31 and VEGFA, and upregulated the expression of osteogenic factors ALP, OCN, and RUNX2, especially when GHS with a GHR of 1:1. Taken together, GHS, derived from the 3D co-culture of sGMSCs and HUVECs, enhanced osteogenic and angiogenic capacities in vitro, extending the application of cell therapy in bone tissue engineering.

3D-printed bioink loading with stem cells and cellular vesicles for periodontitis-derived bone defect repair.

The suitable microenvironment of bone regeneration is critically important for periodontitis-derived bone defect repair. Three major challenges in achieving a robust osteogenic reaction are the exist of oral inflammation, pathogenic bacteria invasion and unaffluent seed cells. Herein, a customizable and multifunctional 3D-printing module was designed with glycidyl methacrylate (GMA) modified epsilon-poly-L-lysine (EPLGMA) loading periodontal ligament stem cells (PDLSCs) and myeloid-derived suppressive cells membrane vesicles (MDSCs-MV) bioink (EPLGMA/PDLSCs/MDSCs-MVs, abbreviated as EPM) for periodontitis-derived bone defect repair. The EPM showed excellent mechanical properties and physicochemical characteristics, providing a suitable microenvironment for bone regeneration.In vitro, EPMs presented effectively kill the periodontopathic bacteria depend on the natural antibacterial properties of the EPL. Meanwhile, MDSCs-MV was confirmed to inhibit T cells through CD73/CD39/adenosine signal pathway, exerting an anti-inflammatory role. Additionally, seed cells of PDLSCs provide an adequate supply for osteoblasts. Moreover, MDSCs-MV could significantly enhance the mineralizing capacity of PDLSCs-derived osteoblast. In the periodontal bone defect rat model, the results of micro-CT and histological staining demonstrated that the EPM scaffold similarly had an excellent anti-inflammatory and bone regeneration efficacyin vivo. This biomimetic and multifunctional 3D-printing bioink opens new avenues for periodontitis-derived bone defect repair and future clinical application.

The effects of early osseointegration in different implant sites in rabbit tibias.

The aim of this study was to evaluate the early osseointegration of implants with the same surface treatment in different implant sites in rabbit tibias after 4 weeks. A total of 42 acid-etched implants were implanted in three different sites in the tibia: group A was 2.08 ± 0.18 mm below epiphyseal line; group B was 7.00 ± 0.61 mm below the epiphyseal line; group C was 13.01 ± 1.26 mm below the epiphyseal line. After 4 weeks, the average bone-to-implant contact (BIC) values were as follows: group A, 40.02 ± 4.82 %; group B, 28.20 ± 5.41 %; group C, 20.76 ± 3.10 %. The BIC measurements yielded statistically significant differences among group A, group B and group C (P < 0.01); group A demonstrated the best osseointegration. In the present study, the different implantation sites in the selected 20-mm area demonstrated different early osseointegration; the sites located 7 ± 1.5 mm below the epiphyseal line were best suited for observing the effectiveness of early osseointegration among the three sites. The statistical results of the early osseointegration of implants are therefore affected by the location of the implant sites in this 20-mm area.

The clinical significance and application of the peri-implant phenotype in dental implant surgery: a narrative review.

Background and Objective: In recent years, the concept of the peri-implant phenotype has become a new standard for the clinical evaluation of the soft and hard tissues surrounding dental implants. Improving this phenotype enhances the likelihood of achieving long-term favorable results and is a necessary consideration during implant planning. Stable peri-implant tissue support is also crucial for the functional and aesthetic value of implant restoration. Herein, the authors review the clinical significance of the peri-implant phenotype and assess the timing of treatment strategies for improving peri-implant phenotype elements. Methods: A literature search was performed to retrieve papers on peri-implant tissue management and clinical outcomes published up to November 24th, 2022 in PubMed, Web of Science, EMBASE, and Scopus. Key Content and Findings: The optimal time to improve peri-implant bone thickness (PBT) is with augmentation procedures before implant surgery or at the same time as first-stage surgery. Similarly, issues associated with keratinized mucosa width (KMW) and mucosal thickness (MT) should be addressed before final restoration. The establishment of supracrestal tissue height (STH) depends on the MT and implant depth of the patient. Furthermore, special attention should be paid to the effect of the peri-implant phenotype on the prognosis of immediate implant placement in the aesthetic zone. Conclusions: The long-term success of implant restoration depends on careful planning that considers appropriate interventions for improving the peri-implant phenotype at different stages of treatment to reduce iatrogenic variables.

Recent advances in the application and biological mechanism of silicon nitride osteogenic properties: a review.

Silicon nitride, an emerging bioceramic material, is highly sought after in the biomedical industry due to its osteogenesis-promoting properties, which are a result of its unique surface chemistry and excellent mechanical properties. Currently, it is used in clinics as an orthopedic implant material. The osteogenesis-promoting properties of silicon nitride are manifested in its contribution to the formation of a local osteogenic microenvironment, wherein silicon nitride and its hydrolysis products influence osteogenesis by modulating the biological behaviors of the constituents of the osteogenic microenvironment. In particular, silicon nitride regulates redox signaling, cellular autophagy, glycolysis, and bone mineralization in cells involved in bone formation via several mechanisms. Moreover, it may also promote osteogenesis by influencing immune regulation and angiogenesis. In addition, the wettability, surface morphology, and charge of silicon nitride play crucial roles in regulating its osteogenesis-promoting properties. However, as a bioceramic material, the molding process of silicon nitride needs to be optimized, and its osteogenic mechanism must be further investigated. Herein, we summarize the impact of the molding process of silicon nitride on its osteogenic properties and clinical applications. In addition, the mechanisms of silicon nitride in promoting osteogenesis are discussed, followed by a summary of the current gaps in silicon nitride mechanism research. This review, therefore, aims to provide novel ideas for the future development and applications of silicon nitride.

Impact of High-Altitude Hypoxia on Bone Defect Repair: A Review of Molecular Mechanisms and Therapeutic Implications.

Reaching areas at altitudes over 2,500-3,000 m above sea level has become increasingly common due to commerce, military deployment, tourism, and entertainment. The high-altitude environment exerts systemic effects on humans that represent a series of compensatory reactions and affects the activity of bone cells. Cellular structures closely related to oxygen-sensing produce corresponding functional changes, resulting in decreased tissue vascularization, declined repair ability of bone defects, and longer healing time. This review focuses on the impact of high-altitude hypoxia on bone defect repair and discusses the possible mechanisms related to ion channels, reactive oxygen species production, mitochondrial function, autophagy, and epigenetics. Based on the key pathogenic mechanisms, potential therapeutic strategies have also been suggested. This review contributes novel insights into the mechanisms of abnormal bone defect repair in hypoxic environments, along with therapeutic applications. We aim to provide a foundation for future targeted, personalized, and precise bone regeneration therapies according to the adaptation of patients to high altitudes.

Evaluation of volume changes following lateral window maxillary sinus floor elevation using Minics software.

Background: Significant volume changes at the site of lateral window maxillary sinus floor elevation have been reported 6 months postoperatively, with stabilization thereafter. However, at present, there is no consensus regarding the gold standard to assess the shape and volume of the bone graft site after implantation. This study aimed to analyze volume changes in the lateral window maxillary sinus floor elevation region using Minics software. Methods: We analyzed 40 patients who underwent lateral window maxillary sinus floor elevation surgery at the Stomatology Department of Binhaiwan Central Hospital, Dongguan, China between 2017 and 2020. Twenty patients underwent lateral window maxillary sinus floor elevation with simultaneous implantation, while 20 patients underwent lateral window maxillary sinus floor elevation with delayed implantation 6 months later. Minics software was used for three-dimensional analysis of the elevation site on the day after surgery (T1) and 6 months after surgery (T2) in both groups. Results: The elevation site volume was reduced 6 months after lateral window maxillary sinus floor elevation. The differences in the length, width, height from the tip, and volume of the implant between T1 and T2 were statistically significant. Conclusions: The length, width, height, and volume of the lateral window maxillary sinus floor elevation region were reduced using Minics software, suggesting that the volume of the elevation site should be enlarged as much as possible during the operation to prevent volume shrinkage.

A Rapid and Convenient Approach to Construct Porous Collagen Membranes via Bioskiving and Sonication-Feasible for Mineralization to Induce Bone Regeneration.

Porous mineralized collagen membranes efficiently promote bone regeneration. To generate them, we need to fabricate collagen membranes that are porous. However, the current fabrication method is primarily based on a bottom-up strategy, with certain limitations, such as a long manufacturing process, collagen denaturation, and failure to control fibril orientation. Using a top-down approach, we explore a novel method for constructing porous collagen membranes via the combined application of bioskiving and sonication. Numerous collagen membranes with well-aligned fibril structures were rapidly fabricated by bioskiving and then sonicated at 30, 60, 90, and 120 W for 20 min. This treatment allowed us to study the effect of power intensity on the physicochemical traits of collagen membranes. Subsequently, the prepared collagen membranes were immersed in amorphous calcium phosphate to evaluate the feasibility of mineralization. Additionally, the bioactivities of the membranes were assessed using preosteoblast cells. Tuning the power intensity was shown to modulate fibril orientation, and the porous membrane without denatured collagen could be obtained by a 20-min sonication treatment at 90 W. The prepared collagen membrane could also be further mineralized to enhance osteogenesis. Overall, this study offers a rapid and convenient approach for fabricating porous collagen membranes via bioskiving and sonication.

Clinical Outcomes of Alveolar Ridge Augmentation with In Situ Autogenous Block Bone: A Retrospective Review.

PURPOSE: To present clinical outcomes of alveolar ridge augmentation using in situ autogenous block bone and to compare the outcomes with previous studies. MATERIALS AND METHODS: The medical records of patients with a severe horizontal bone defect in a partially edentulous alveolar ridge (width < 3.5 mm), who received bone augmentation using in situ autogenous block bone, were retrospectively reviewed. After a 6-month or longer healing period, the augmentation effect was examined before implant placement. Cone beam computed tomography (CBCT) was performed before and after surgeries. The alveolar width of the bone grafts was measured on the CBCT images. RESULTS: A total of 16 patients (22 grafts) were included. Graft exposure was seen in three grafts, which were classified as failed cases. The augmentation volume at implant placement in the failed cases was significantly lower than that of the successful cases. There were no significant differences in augmentation between anterior maxillary and mandibular implant sites. CONCLUSION: Autogenous bone grafting using in situ block bone is an effective and reliable approach for horizontal bone augmentation in the mandible and anterior maxilla that eliminates second donor site morbidity. Complete release of the buccal flap and tension-free suture is the key to avoiding wound dehiscence and ensuring the effectiveness of bone augmentation.

Conditioned medium derived from 3D tooth germs: A novel cocktail for stem cell priming and early in vivo pulp regeneration.

OBJECTIVES: Conditioned medium (CM) from 2D cell culture can mitigate the weakened regenerative capacity of the implanted stem cells. However, the capacity of 3D CM to prime dental pulp stem cells (DPSCs) for pulp regeneration and its protein profile are still elusive. We aim to investigate the protein profile of CM derived from 3D tooth germs, and to unveil its potential for DPSCs-based pulp regeneration. MATERIALS AND METHODS: We prepared CM of 3D ex vivo cultured tooth germ organs (3D TGO-CM) and CM of 2D cultured tooth germ cells (2D TGC-CM) and applied them to prime DPSCs. Influences on cell behaviours and protein profiles of CMs were compared. In vivo pulp regeneration of CMs-primed DPSCs was explored using a tooth root fragment model on nude mice. RESULTS: TGO-CM enhanced DPSCs proliferation, migration, in vitro mineralization, odontogenic differentiation, and angiogenesis performances. The TGO-CM group generated superior pulp structures, more odontogenic cells attachment, and enhanced vasculature at 4 weeks post-surgery, compared with the TGC-CM group. Secretome analysis revealed that TGO-CM contained more odontogenic and angiogenic growth factors and fewer pro-inflammatory cytokines. Mechanisms leading to the differential CM profiles may be attributed to the cytokine-cytokine receptor interaction and PI3K-Akt signalling pathway. CONCLUSIONS: The unique secretome profile of 3D TGO-CM made it a successful priming cocktail to enhance DPSCs-based early pulp regeneration.

Periodontitis regulates renal impairment in obese mice via TGF-ß/Smad pathway.

OBJECTIVE: To determine the impact of periodontitis on renal impairment induced by obesity. METHODS: Periodontitis and obesity models were induced using silk ligatures with bacteria and high-fat diet, respectively. Indicators of renal function were compared. Renal tubular epithelial cells (RTECs) were treated with lipopolysaccharides from periodontal pathogens in a high-fat environment to induce cell models of periodontitis and obesity. The transforming growth factor-ß/mothers against decapentaplegic homolog (Smad) (TGF-ß/Smad) pathway was evaluated both in vivo and in vitro. The indicators of renal function, renal pathological changes, and serum inflammatory cytokines were measured. The viability/apoptosis of RTECs and the expression of inflammatory cytokines were determined. RESULTS: Periodontitis resulted in an increase in TGF-ß/Smad activity in the kidney of obese mice. Moreover, the activity of RTECs was also increased in vitro. Downregulation of TGF-ß led to reduced TGF-ß, p-Smad2, p-Smad3, and Smad7 levels in kidney tissue and RTECs, ameliorated renal function indicators and renal pathological changes, increased viability and apoptosis of RTECs, and decreased levels of inflammatory cytokines. CONCLUSION: Periodontitis regulates renal impairment via the TGF-ß/Smad pathway in obese mice.

Optimizing Safe Dental Practice During the COVID-19 Pandemic: Recommendations Based on a Guide Developed for Dental Practices in China.

The current global coronavirus disease 2019 (COVID-19) outbreak is still exerting severe global implications, and its development in various regions is complex and variable. The high risk of cross-infection poses a great challenge to the dental practice environment; it is therefore urgent to develop a set of pandemic prevention measures to ensure dental practice safety during the COVID-19 outbreak. Therefore, we combined the epidemiological characteristics of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), public emergency measures for COVID-19, characteristics of dental practice, and relevant literature reports to develop a set of dynamic practice measures for dental practices in high-, medium-, and low-risk areas affected by COVID-19. This will help dental practices to achieve standard prevention and ensure their safe and smooth operation during the pandemic. It is hoped that these measures will provide a reference basis for dental hospitals and dental clinics in their care and pandemic prevention work.

Impact of High-Altitude Hypoxia on Early Osseointegration With Bioactive Titanium.

Nowadays, the bone osseointegration in different environments is comparable, but the mechanism is unclear. This study aimed to investigate the osseointegration of different bioactive titanium surfaces under normoxic or high-altitude hypoxic environments. Titanium implants were subjected to one of two surface treatments: (1) sanding, blasting, and acid etching to obtain a rough surface, or (2) extensive polishing to obtain a smooth surface. Changes in the morphology, proliferation, and protein expression of osteoblasts on the rough and smooth surfaces were examined, and bone formation was studied through western blotting and animal-based experiments. Our findings found that a hypoxic environment and rough titanium implant surface promoted the osteogenic differentiation of osteoblasts and activated the JAK1/STAT1/HIF-1α pathway in vitro. The animal study revealed that following implant insertion in tibia of rabbit, bone repair at high altitudes was slower than that at low altitudes (i.e., in plains) after 2weeks; however, bone formation did not differ significantly after 4weeks. The results of our study showed that: (1) The altitude hypoxia environment would affect the early osseointegration of titanium implants while titanium implants with rough surfaces can mitigate the effects of this hypoxic environment on osseointegration, (2) the mechanism may be related to the activation of JAK1/STAT1/HIF-1α pathway, and (3) our results suggest the osteogenesis of titanium implants, such as oral implants, is closely related to the oxygen environment. Clinical doctors, especially dentists, should pay attention to the influence of hypoxia on early osseointegration in patients with high altitude. For example, it is better to choose an implant system with rough implant surface in the oral cavity of patients with tooth loss at high altitude.